Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

COX ENVIRONMENTAL & HYDROGEOLOGIC LLC

UEI: DPBYCTH9AMH1CAGE: 3YDC2

COX ENVIRONMENTAL & HYDROGEOLOGIC LLC is a federal contractor, registered under UEI DPBYCTH9AMH1 and CAGE code 3YDC2. It has been awarded $706,907 across 7 federal contracts. Primary work spans Remediation Services, Engineering Services, and Environmental Consulting Services. Top awarding agencies include Department Of Defense (dod) and Department Of Defense.

Contact Information

Registration and classification details

Address123 Main St, City, ST 12345

Registration

UEI Code

DPBYCTH9AMH1

CAGE Code

3YDC2

Entity Structure

Partnership or Limited Liability Partnership

Established

N/A

Business Classifications

2XLJ

NAICS Codes

541330Engineering Services

541360Geophysical Surveying and Mapping Services

541620Environmental Consulting Services(Primary)

541690Other Scientific and Technical Consulting Services

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Defense (dod)$698.0K98.7%

Department Of Defense$8.9K1.3%

Awards by NAICS

562910 - Remediation Services$490.2K69.3%

541330 - Engineering Services$207.8K29.4%

541620 - Environmental Consulting Services$8.9K1.3%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in COX ENVIRONMENTAL & HYDROGEOLOGIC LLC's top NAICS codes and agencies

Environmental Site Assessment and Remediation

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and ReportingThe contract requires the identification, labeling, and preparation of Safety Data Sheets for hazardous materials contained in delivered equipment, ensuring full compliance with OSHA and federal regulations. All activities must align with established standards for documenting chemical hazards, handling instructions, emergency measures, and regulatory information to ensure workplace and transportation safety. The work is tied to equipment delivered to the Department of Defense’s New Cumberland facility, with performance occurring at the specified location in Pennsylvania, zip code 17070-5002. This subcontract falls under NAICS code 541620, indicating it involves scientific and technical consulting services related to environmental or safety compliance. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, and is managed by the DDSP New Cumberland Facility. All proposers must demonstrate expertise in hazardous material documentation, regulatory adherence, and the ability to deliver accurate SDS documentation under federal contracting requirements. Failure to meet these standards could result in non-compliance penalties and rejection of delivered equipment.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Technical Data Package (TDP) and Drawing Compliance SupportThe contract requires engineering and documentation support to ensure full compliance with Technical Data Package (TDP) standards, military drawings, QPL-2939-26, and Contract Data Requirements List (CDRL) specifications. The scope centers on providing technical expertise to align design and manufacturing processes with mandated defense documentation and quality control criteria, ensuring all deliverables meet stringent military and regulatory requirements. This support is critical for maintaining consistency, traceability, and audit readiness across the production lifecycle. The work is to be performed in San Diego, California, at a specified ZIP code, and is classified as a subcontract under NAICS code 541330, which corresponds to engineering services. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The contracting entity is the Department of Defense under the Construction & Equipment MRO SVC I agency, indicating this effort supports military maintenance, repair, and overhaul operations. All deliverables must adhere strictly to the defined technical and procedural standards to ensure interoperability and regulatory compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Quality Assurance and Testing ServicesThe contract requires independent quality assurance services, first article testing, and lot sampling conducted in accordance with MIL-STD-1916 and Contract Data Requirements List (CDRL) specifications, ensuring all deliverables meet federal defense standards. The work involves comprehensive documentation and reporting directly to the prime contractor, with a focus on rigorous inspection protocols and compliance verification throughout the production lifecycle. All activities must align with the technical and procedural requirements defined by the Department of Defense. Performance is obligated at a designated location in San Diego, California, with a firm response deadline of August 17, 2026, and the solicitation issued under NAICS code 541330 for engineering services. The contract is classified as a subcontract, positioned within the broader Construction & Equipment MRO SVC I procurement framework, and is intended to support defense-related maintenance, repair, and overhaul operations. The offering entity must demonstrate capability to execute testing and quality control functions under strict defense contracting mandates, with timely and accurate reporting a non-negotiable component of compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires comprehensive hazard communication compliance services to ensure adherence to OSHA regulations and Department of Defense Logistics Agency shipping standards. This includes the preparation of safety data sheets and the accurate labeling of hazardous materials for all relevant shipments, with performance specifically tied to the New Cumberland facility in Pennsylvania. The work is scoped under NAICS code 541620, indicating it falls within the management and scientific consulting services category, and is structured as a subcontract opportunity. Interested parties must submit responses by August 17, 2026, following the posting date of August 5, 2026, with all activities centered on meeting federal safety and transport mandates for hazardous substances.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 6 hours ago

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires comprehensive quality inspection and acceptance support in accordance with MIL-STD-1916 and ASQ H1331 standards, applying defined Acceptable Quality Level thresholds for critical, major, and minor defects to ensure product conformance. The scope involves rigorous sampling and evaluation procedures to validate compliance with specified defect tolerances across all inspected items, ensuring only products meeting the strict military and industry quality benchmarks are accepted. This is a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 541330, and is posted for performance with no specific location or set-aside designation provided. The solicitation is active as of August 5, 2026, and all work must align with the referenced standards to meet contractual obligations for defect detection and quality assurance in defense-related supply chains.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Handling & Packaging ComplianceThe contract pertains to the preparation of Safety Data Sheets and full compliance with hazardous material labeling and packaging requirements for defense-related shipments, ensuring adherence to federal and international regulations. The work is specifically tied to the Defense Logistics Agency under the Department of Defense, with performance centered at Fort Eustis, Virginia, and falls under the NAICS code 541620 for environmental consulting services. All deliverables must meet strict military and transportation safety standards to support secure and lawful movement of hazardous materials within the defense supply chain. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and is structured as a subcontract opportunity. While no set-aside classification or point of contact is specified, the place of performance indicates the need for on-site or locally coordinated support in the Fort Eustis region. Contractors must possess the expertise to interpret complex hazardous material regulations and apply them to defense logistics, ensuring accurate documentation, secure packaging, and proper labeling of all regulated substances. The absence of a solicitation number suggests this may be a direct award or internally managed opportunity within the DLA system.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires the identification of hazardous components within a fan, particularly focusing on substances such as lubricants, and the preparation of a fully compliant Safety Data Sheet (SDS) in accordance with OSHA’s 29 CFR 1910.1200(g) and Federal Standard No. 313. This involves thorough analysis to determine all chemical hazards associated with the fan's materials and ensuring that the SDS includes accurate information on composition, physical and chemical properties, health hazards, first-aid measures, fire-fighting procedures, handling and storage guidelines, exposure controls, and environmental precautions. The deliverable must meet all regulatory requirements for clarity, structure, and completeness to ensure workplace safety and regulatory alignment. The contract is issued as a subcontract under NAICS code 541620 for scientific and technical consulting services and is tied to the Department of Defense through its organization, CONSTRUCTION & EQUIPMENT MRO SVC I. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. Although no specific set-aside status is indicated, the work is part of a defense-related procurement managed through the DLA Dibbs system, and the contractor must be prepared to deliver a legally compliant SDS that supports federal and occupational safety standards without deviation.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Hazardous Materials Compliance and Safety Data Sheet (SDS) ProviderThe contract seeks a Service-Disabled Veteran-Owned Small Business to prepare and submit Safety Data Sheets for hazardous materials included in a maintenance kit, ensuring full compliance with OSHA’s Hazard Communication Standard, Federal Standard No. 313, and Department of Defense requirements. The provider must accurately document chemical identities, hazards, handling procedures, emergency measures, and regulatory information to meet federal and military safety standards. This subcontract is part of a broader effort to maintain strict regulatory alignment across defense supply chains, with all SDS materials required to be technically precise, systematically organized, and ready for immediate use by authorized personnel. The solicitation is open for responses until August 20, 2026, and falls under NAICS code 541620 for other scientific and technical consulting services. It is exclusively set aside for Service-Disabled Veteran-Owned Small Businesses, reflecting the Department of Defense’s commitment to supporting veteran-owned enterprises. The work is managed by the Strategic Acquisition Program Directorate, and while specific performance location details are not provided, the deliverables are intended for use within DoD-maintained maintenance systems. Proposals must demonstrate capability in hazardous materials documentation, knowledge of federal compliance frameworks, and a proven track record in producing audit-ready SDS documentation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 6 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 7 hours ago

DEADLINE

902/903 Dorm Mold Remediation & Removal

Solicitation # 902/903 Dorm Mold Remediation and Removal

This contract involves mold remediation and removal services at two dormitory buildings—902 and 903—at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the complete remediation of mold-contaminated areas, including the removal and disposal of affected drywall, insulation, ceiling materials, and finishes, along with thorough cleaning, sanitization, and restoration to match existing conditions. All activities must comply with EPA guidelines and IICRC S520 standards, utilizing negative air pressure containment, HEPA filtration, and commercial-grade dehumidification equipment. Post-remediation verification, including air quality testing if necessary, must be documented and submitted. The work is to be performed within 60 consecutive business days after receipt of a Notice to Proceed, with a required site visit and signed attendance roster prior to bid submission. The contract type is a fixed-price, single lump sum, with an estimated value between $25,000 and $100,000. Bidders must submit a detailed cost breakout on company letterhead itemizing labor, materials, equipment, fees, bonds, subcontractor costs, overhead, and profit. A bid bond equal to 20% of the base bid is required if the bid is $25,000 or more, along with performance and payment bonds at 100% of the contract price, issued by an A-rated surety. Contractors must provide proof of insurance covering workers’ compensation, general liability, automobile, and professional liability, and must comply with federal wage requirements under the Construction Wage Rate Requirements and Executive Order 13658, submitting weekly certified payroll reports. Hazardous materials used must be accompanied by Safety Data Sheets, and all waste must be collected daily and removed off-site in accordance with environmental regulations. The project is subject to strict debarment and suspension disclosures under FAR 52.209-6, and subcontractors must self-certify their business category per NAICS code 562910. The contracting entity is Management & Training Corporation (MTC), acting on behalf of the U.S. Department of Labor, and the solicitation is set aside exclusively for small business concerns including small disadvantaged, women-owned, veteran-owned, and HUBZone small businesses. Proposals must be submitted via email by August 10, 2026 at 3:00 PM CST, and awards will be made based on

Earle C. Clements Job Corps Center

POSTED

about 7 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, focusing on engineering, environmental, surveying, geotechnical, permitting, public outreach, and utility location services. The project emphasizes participation from Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Businesses, Minority-Owned Businesses, and other certified small business categories including SDB, WOSB, VOSB, and SDVOSB, in alignment with SBA set-aside programs. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at GHD Inc., reachable via email at charles.brown@ghd.com or phone at 404-543-7342. The work will be performed in California and is classified under NAICS code 541330 for engineering services, with additional relevant codes covering environmental, surveying, and public infrastructure support activities.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Mold Remediation

Solicitation # mold-remediation

The contract seeks a licensed mold remediation contractor to perform remediation services at the Solo Parent Dormitory within the Flint Hills Job Corps Center in Manhattan, Kansas, specifically targeting rooms 208, 209, 210, 302, 310, and the 300 hallway linen closet. The work must adhere to the IICRC S520 Mold Remediation Standard, EPA guidelines, OSHA regulations, and Job Corps safety and facility standards, with all containment procedures requiring critical barriers and HEPA-filtered negative air machines. The contractor must remove contaminated porous materials such as drywall, insulation, and carpeting, clean and treat surfaces with EPA-registered antimicrobials, and bag and seal all waste for proper disposal. A comprehensive post-remediation verification process, including visual inspections, air and surface sampling, and a detailed written report with lab results and photographs, is mandatory for acceptance. The performance period is limited to 10 business days, and a one-year warranty on the remediation work is required. The solicitation is designated as a small business set-aside, open to SBA-certified categories including SB, SDB, WOSB, HUBZone SB, VOSB, and SDVOSB. Offerors must submit a complete proposal that includes a detailed pricing schedule with labor, material, and total costs, along with a W-9 form and DUNS number. Compliance with the Davis Bacon Act wage determinations is required, and contractors must provide a Certificate of Liability Insurance naming the Job Corps Center as both certificate holder and additional insured. Awards will be made to the offeror whose proposal is most advantageous based solely on price and price-related factors, with material compliance serving as a pass/fail gate—any non-compliance results in disqualification. Upon award, the contractor must submit SF-1413 and, if the contract exceeds $30,000, Serrato Form 542. The deadline for proposal submission is August 13, 2026, at 4:00 PM CST.

Serrato Corporation DBA Flint Hills Job Corps

POSTED

about 7 hours ago

DEADLINE

Engineering Design Services

Solicitation # TPJCO Engineering Design Services 26-17

The contract solicits engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon. The work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size printed drawing set. The solicitation is structured as a fee-for-service subcontracting opportunity under Management & Training Corporation, the operator of the facility, and is classified under NAICS Code 541330 with a small business size standard of $9 million in annual revenue. The acquisition is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with all subcontractors required to self-certify their business category and provide a Unique Entity Identifier and Taxpayer Identification Number. The contract includes compliance with multiple Federal Acquisition Regulation clauses, including 52.219-8 for small business representation, 52.223-41 for Service Contract Labor Standards tied to Wage Determination SCA WD 2015-5577 Rev. 28, and 52.209-6 mandating debarment disclosures for first-tier subcontractors exceeding $30,000. Projects valued at $40,000 or more are subject to FFATA reporting requirements, and all contractors must adhere to DOL data privacy and reporting protocols, including mandatory encryption of personally identifiable information and reporting of any breach within one hour of discovery. The contractor must indemnify MTC against claims arising from their performance, negligence, or contract violations, and is obligated to pay at least the prevailing federal contractor minimum wage. Invoicing must include purchase order number, service dates, itemized pricing with extended and total amounts, invoice number and date, and must be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of all deliverables. The Place of Performance is strictly limited to the Tongue Point Job Corps Center, and while insurance is not required, the contractor must provide immediate written notice of any delays to performance. Proposals must be submitted by email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and must include the bid sheet, W-9,

Tongue Point Job Corps

POSTED

about 7 hours ago

DEADLINE

in about 1 hour

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under the project identifier C2305. The work encompasses two phases: Phase 1 includes the preparation of technical specifications, civil site design drawings, and line-bid items for drilling and abandonment of the existing Corydon well in compliance with Riverside County and California State Water Resources Control Board regulations, along with full-time on-site construction management oversight; Phase 2 involves detailed architectural, structural, mechanical, electrical, and instrumentation and controls design drawings, as well as a line-item bid schedule for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design depth, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes, alongside start-up support and operator training. The project requires strict adherence to AWWA potable water well standards, with the new well featuring a 24-inch stainless steel Ful-Flo louvered screen and vertical turbine equipment matching the existing system, and discharge piping tied into the Corydon Blend station and Malaga blending location. All work must comply with SWRCB-DDW, DWR, and EVMWD requirements. The solicitation mandates compliance with federal regulations including the Uniform Administrative Requirements, Governmentwide Debarment and Suspension, Drug-Free Workplace, and the Build America Buy America Act, requiring certified domestic content for iron, steel, and manufactured products with waiver procedures for non-compliant alternatives. Proposers must submit detailed cost proposals broken down by task, including hourly rates and incidental costs, with a not-to-exceed amount to be negotiated post-selection. The evaluation prioritizes demonstrated competence and professional qualifications, with 25% weight assigned to relevant experience and team qualifications, 25% to understanding of the project and technical approach, 20% to schedule and risk mitigation, 10% to innovation, 10% to cost value, and 10% to overall proposal quality, with cost being only one factor in award decisions. Submission is mandatory through the PlanetBids portal by September 1, 2026, with questions due by August 25, 2026, and all proposers must complete mandatory certifications including American Iron and Steel, Lobby

Ardurra Group, Inc.

POSTED

about 7 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and ongoing engineering services during construction. The project involves comprehensive civil and water infrastructure engineering to replace an existing well system, ensuring reliable water supply and compliance with current standards. Services required include detailed design development, preparation of bid documents, assistance with the procurement process, and active engineering oversight throughout construction to address technical challenges and ensure project integrity. The solicitation is open to qualified firms, with a preference for Disadvantaged Business Enterprises under Department of Transportation guidelines, and is classified under NAICS code 541330 for engineering services. Respondents must submit proposals by the deadline of September 1, 2026, and should direct inquiries to Katie Neubauer of AKM Consulting Engineers, the lead agency overseeing the procurement and project implementation.

AKM Consulting Engineers

POSTED

about 7 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design, construction support, and comprehensive engineering services for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well located on Elsinore Valley Municipal Water District (EVMWD) property. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design, site civil engineering, and full-time construction management and hydrogeological oversight during drilling and abandonment activities, with technical specifications requiring a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth and adhering to AWWA potable water standards and California and Riverside County regulations. Phase 2 entails detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design for well equipping, testing, and commissioning, supported by bidding assistance and ongoing engineering services during construction. The project must comply with the Build America, Buy America Act and 2 CFR Part 184, requiring domestic sourcing of iron, steel, and manufactured products, with full documentation and certification of origin. All work must align with federal funding requirements tied to a $400,000 Bureau of Reclamation grant, triggering compliance with 2 CFR Part 200, including Uniform Administrative Requirements, audit provisions, debarment and suspension restrictions, and the Byrd Anti-Lobbying Act. The successful firm must demonstrate extensive experience in municipal groundwater projects, provide detailed qualifications and resumes of key personnel, hold applicable California professional licenses, and maintain current certifications including the California Air Resources Board Compliance Certificate and Department of Industrial Relations registration for public work. Proposals must include a cost structure broken down by task with hourly rates, travel, and incidental costs, subject to a not-to-exceed limit of $1,000,000, with performance anticipated from November 2026 through May 2028. Evaluation prioritizes demonstrated competence and professional qualifications over cost, with weighted factors for experience, technical approach, schedule, innovation, cost, and proposal quality. Submission through EVMWD’s PlanetBids portal by the September 1, 2026 deadline requires full compliance with Attachment 2 forms, including Conflict of Interest Disclosure, American Iron and Steel Certification, Debarment and Suspension Certification, SAM status, and DBE subconsultant information, along with the executed Professional Services Agreement. Monthly invoicing with progress reports is mandatory, and the District retains audit rights to records for four years after

GEI Consultants, Inc.

POSTED

about 7 hours ago

DEADLINE

Shop Drawing and Product Certification ServicesThe contract requires the preparation and submission of detailed shop drawings, product cut sheets, and compliance documentation specifically for door assemblies prior to any installation activities. This work must be completed to ensure all door systems meet project specifications and regulatory standards, serving as a critical precursor to on-site construction efforts. The deliverables are essential for approval processes and must be accurately compiled to avoid delays or rework. The opportunity is listed under the NAICS code 541330, indicating it falls within architectural and engineering services, and is categorized as a subcontract for the BOE Maintenance agency in Connecticut. The solicitation was posted on August 5, 2026, with a hard deadline of September 1, 2026, at 6:00 PM for responses. While no set-aside designation or point of contact information is provided, interested parties must submit all required materials through the online portal before the deadline to be considered.

BOE Maintenance

POSTED

about 7 hours ago

DEADLINE