Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

DBKB Technologies, LLC 15121 Timberlake Drive SILVER SPRING MD 20905 USA

UEI: SLED_DF6392DFA438320D

DBKB Technologies, LLC 15121 Timberlake Drive SILVER SPRING MD 20905 USA is a federal contractor, registered under UEI SLED_DF6392DFA438320D. It has been awarded $111,567 across 2 federal contracts. Primary work spans Other Communication and Energy Wire Manufacturing and Engineering Services. Top awarding agencies include Department Of Commerce Noaa and Nswc Philadelphia Division.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_DF6392DFA438320D

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Commerce Noaa$96.6K86.6%

Nswc Philadelphia Division$15.0K13.4%

Awards by NAICS

335929 - Other Communication and Energy Wire Manufacturing$96.6K86.6%

541330 - Engineering Services$15.0K13.4%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in DBKB Technologies, LLC 15121 Timberlake Drive SILVER SPRING MD 20905 USA's top NAICS codes and agencies

Technical Data Package (TDP) and Drawing Compliance SupportThe contract requires engineering and documentation support to ensure full compliance with Technical Data Package (TDP) standards, military drawings, QPL-2939-26, and Contract Data Requirements List (CDRL) specifications. The scope centers on providing technical expertise to align design and manufacturing processes with mandated defense documentation and quality control criteria, ensuring all deliverables meet stringent military and regulatory requirements. This support is critical for maintaining consistency, traceability, and audit readiness across the production lifecycle. The work is to be performed in San Diego, California, at a specified ZIP code, and is classified as a subcontract under NAICS code 541330, which corresponds to engineering services. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. The contracting entity is the Department of Defense under the Construction & Equipment MRO SVC I agency, indicating this effort supports military maintenance, repair, and overhaul operations. All deliverables must adhere strictly to the defined technical and procedural standards to ensure interoperability and regulatory compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Quality Assurance and Testing ServicesThe contract requires independent quality assurance services, first article testing, and lot sampling conducted in accordance with MIL-STD-1916 and Contract Data Requirements List (CDRL) specifications, ensuring all deliverables meet federal defense standards. The work involves comprehensive documentation and reporting directly to the prime contractor, with a focus on rigorous inspection protocols and compliance verification throughout the production lifecycle. All activities must align with the technical and procedural requirements defined by the Department of Defense. Performance is obligated at a designated location in San Diego, California, with a firm response deadline of August 17, 2026, and the solicitation issued under NAICS code 541330 for engineering services. The contract is classified as a subcontract, positioned within the broader Construction & Equipment MRO SVC I procurement framework, and is intended to support defense-related maintenance, repair, and overhaul operations. The offering entity must demonstrate capability to execute testing and quality control functions under strict defense contracting mandates, with timely and accurate reporting a non-negotiable component of compliance.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 6 hours ago

DEADLINE

Quality Inspection and Acceptance SupportThe contract requires comprehensive quality inspection and acceptance support in accordance with MIL-STD-1916 and ASQ H1331 standards, applying defined Acceptable Quality Level thresholds for critical, major, and minor defects to ensure product conformance. The scope involves rigorous sampling and evaluation procedures to validate compliance with specified defect tolerances across all inspected items, ensuring only products meeting the strict military and industry quality benchmarks are accepted. This is a subcontract under the Department of Defense’s Defense Logistics Agency, classified under NAICS code 541330, and is posted for performance with no specific location or set-aside designation provided. The solicitation is active as of August 5, 2026, and all work must align with the referenced standards to meet contractual obligations for defect detection and quality assurance in defense-related supply chains.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Cable Assembly Manufacturing and SupplyThe contract entails the manufacture and delivery of 4,000 military-grade cable assemblies designated by NSN 5995-01-698-9948, strictly adhering to MIL-STD-1916 for quality assurance and MIL-STD-129 for marking and labeling requirements. The work is classified as a subcontract under the NAICS code 335929, and it is managed by the Defense Logistics Agency under the Department of Defense, ensuring alignment with federal defense supply chain protocols. The production must meet exacting military specifications to guarantee operational reliability in deployed environments. The contract was posted on August 5, 2026, and the place of performance and physical office details are not specified, indicating flexibility in manufacturing location as long as delivery meets federal requirements. The award tracking is accessible via a DIBBS portal link, and while no set-aside status or point of contact is listed, compliance with all technical, packaging, and documentation standards is mandatory. The subcontractor is expected to fulfill all contractual obligations related to quality control, traceability, and timely delivery to support Defense Logistics Agency supply readiness.

Defense Logistics Agency

POSTED

about 6 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 6 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-R-XC27

This contract, issued under solicitation number SPE4A6-26-R-XC27 by the DLA Aviation ASC Commodities Division, is an indefinite delivery purchase order for 100 cable assemblies identified by National Stock Number 5995-01-664-4125 at a firm fixed price, with a delivery requirement of 197 days after award. The contract serves as a long-term sourcing vehicle with a five-year base period, during which delivery orders may be placed up to an aggregate ceiling of $350,000, with a guaranteed minimum annual demand of 100 units. All supplies are to be delivered FOB origin to various CONUS stock locations, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and palletization standards defined under DLA’s packaging requirements. The product is classified as a critical application item and is subject to stringent quality controls, including sampling per MIL-STD-1916 or ASQ H1331 Table 1, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required unless otherwise specified. The contractor must comply with comprehensive cybersecurity and information security obligations, including achieving and documenting CMMC Level 2 self-assessment, and implementing DFARS clauses covering safeguarding covered defense information, prohibiting acquisition of certain telecommunications equipment, and reporting cyber incidents. Additional regulatory requirements include adherence to Buy American and trade restriction clauses, prohibitions against hexavalent chromium and hazardous materials, and compliance with trafficking in persons provisions. All offers must be submitted electronically via email to the designated buyer, not exceeding 15 MB, and require full completion of SAM representations and certifications, including those related to foreign ownership, defense telecommunications, and state sponsorship of terrorism. Packaging must include hard copies of the contract, material certifications, and manufacturing drawings within each unit, and the contractor must use the WAWF system for all invoicing and receiving documentation. The evaluation for award emphasizes past performance as significantly more important than other non-price factors, with price assessed comparatively alongside historical quality and delivery compliance. Offers that fail to meet any mandatory representation, certification, or documentation requirement will be deemed technically unacceptable.

ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 7 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for Elsinore Valley Municipal Water District in Riverside County and Southern California, focusing on engineering, environmental, surveying, geotechnical, permitting, public outreach, and utility location services. The project emphasizes participation from Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Businesses, Minority-Owned Businesses, and other certified small business categories including SDB, WOSB, VOSB, and SDVOSB, in alignment with SBA set-aside programs. Interested firms must submit a qualifications package by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026, with final responses due by September 15, 2026. Primary contact is Charlie Brown at GHD Inc., reachable via email at charles.brown@ghd.com or phone at 404-543-7342. The work will be performed in California and is classified under NAICS code 541330 for engineering services, with additional relevant codes covering environmental, surveying, and public infrastructure support activities.

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCO Engineering Design Services 26-17

The contract solicits engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon. The work requires a licensed Professional Engineer to produce signed and stamped engineering drawings, structural calculations, material specifications, and a bill of materials, along with electronic PDF copies and one full-size printed drawing set. The solicitation is structured as a fee-for-service subcontracting opportunity under Management & Training Corporation, the operator of the facility, and is classified under NAICS Code 541330 with a small business size standard of $9 million in annual revenue. The acquisition is set aside exclusively for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, with all subcontractors required to self-certify their business category and provide a Unique Entity Identifier and Taxpayer Identification Number. The contract includes compliance with multiple Federal Acquisition Regulation clauses, including 52.219-8 for small business representation, 52.223-41 for Service Contract Labor Standards tied to Wage Determination SCA WD 2015-5577 Rev. 28, and 52.209-6 mandating debarment disclosures for first-tier subcontractors exceeding $30,000. Projects valued at $40,000 or more are subject to FFATA reporting requirements, and all contractors must adhere to DOL data privacy and reporting protocols, including mandatory encryption of personally identifiable information and reporting of any breach within one hour of discovery. The contractor must indemnify MTC against claims arising from their performance, negligence, or contract violations, and is obligated to pay at least the prevailing federal contractor minimum wage. Invoicing must include purchase order number, service dates, itemized pricing with extended and total amounts, invoice number and date, and must be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of all deliverables. The Place of Performance is strictly limited to the Tongue Point Job Corps Center, and while insurance is not required, the contractor must provide immediate written notice of any delays to performance. Proposals must be submitted by email to Elizabeth Williamson by 2:00 PM PST on August 6, 2024, and must include the bid sheet, W-9,

Tongue Point Job Corps

POSTED

about 7 hours ago

DEADLINE

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprise (DBE) firms to provide comprehensive design, bidding support, and engineering services during construction for the Corydon Well Replacement Project in California, under the project identifier C2305. The work encompasses two phases: Phase 1 includes the preparation of technical specifications, civil site design drawings, and line-bid items for drilling and abandonment of the existing Corydon well in compliance with Riverside County and California State Water Resources Control Board regulations, along with full-time on-site construction management oversight; Phase 2 involves detailed architectural, structural, mechanical, electrical, and instrumentation and controls design drawings, as well as a line-item bid schedule for equipping, testing, and commissioning the new well. Key deliverables include a Preliminary Design Report at up to 30% design depth, review of approximately 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes, alongside start-up support and operator training. The project requires strict adherence to AWWA potable water well standards, with the new well featuring a 24-inch stainless steel Ful-Flo louvered screen and vertical turbine equipment matching the existing system, and discharge piping tied into the Corydon Blend station and Malaga blending location. All work must comply with SWRCB-DDW, DWR, and EVMWD requirements. The solicitation mandates compliance with federal regulations including the Uniform Administrative Requirements, Governmentwide Debarment and Suspension, Drug-Free Workplace, and the Build America Buy America Act, requiring certified domestic content for iron, steel, and manufactured products with waiver procedures for non-compliant alternatives. Proposers must submit detailed cost proposals broken down by task, including hourly rates and incidental costs, with a not-to-exceed amount to be negotiated post-selection. The evaluation prioritizes demonstrated competence and professional qualifications, with 25% weight assigned to relevant experience and team qualifications, 25% to understanding of the project and technical approach, 20% to schedule and risk mitigation, 10% to innovation, 10% to cost value, and 10% to overall proposal quality, with cost being only one factor in award decisions. Submission is mandatory through the PlanetBids portal by September 1, 2026, with questions due by August 25, 2026, and all proposers must complete mandatory certifications including American Iron and Steel, Lobby

Ardurra Group, Inc.

POSTED

about 7 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and ongoing engineering services during construction. The project involves comprehensive civil and water infrastructure engineering to replace an existing well system, ensuring reliable water supply and compliance with current standards. Services required include detailed design development, preparation of bid documents, assistance with the procurement process, and active engineering oversight throughout construction to address technical challenges and ensure project integrity. The solicitation is open to qualified firms, with a preference for Disadvantaged Business Enterprises under Department of Transportation guidelines, and is classified under NAICS code 541330 for engineering services. Respondents must submit proposals by the deadline of September 1, 2026, and should direct inquiries to Katie Neubauer of AKM Consulting Engineers, the lead agency overseeing the procurement and project implementation.

AKM Consulting Engineers

POSTED

about 7 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project involves the design, construction support, and comprehensive engineering services for a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well located on Elsinore Valley Municipal Water District (EVMWD) property. The project is divided into two phases: Phase 1 focuses on hydrogeological evaluation, aquifer analysis, well design, site civil engineering, and full-time construction management and hydrogeological oversight during drilling and abandonment activities, with technical specifications requiring a 24-inch diameter stainless steel Ful-Flo louvered well screen matching the existing casing depth and adhering to AWWA potable water standards and California and Riverside County regulations. Phase 2 entails detailed architectural, civil, mechanical, structural, electrical, and instrumentation and controls design for well equipping, testing, and commissioning, supported by bidding assistance and ongoing engineering services during construction. The project must comply with the Build America, Buy America Act and 2 CFR Part 184, requiring domestic sourcing of iron, steel, and manufactured products, with full documentation and certification of origin. All work must align with federal funding requirements tied to a $400,000 Bureau of Reclamation grant, triggering compliance with 2 CFR Part 200, including Uniform Administrative Requirements, audit provisions, debarment and suspension restrictions, and the Byrd Anti-Lobbying Act. The successful firm must demonstrate extensive experience in municipal groundwater projects, provide detailed qualifications and resumes of key personnel, hold applicable California professional licenses, and maintain current certifications including the California Air Resources Board Compliance Certificate and Department of Industrial Relations registration for public work. Proposals must include a cost structure broken down by task with hourly rates, travel, and incidental costs, subject to a not-to-exceed limit of $1,000,000, with performance anticipated from November 2026 through May 2028. Evaluation prioritizes demonstrated competence and professional qualifications over cost, with weighted factors for experience, technical approach, schedule, innovation, cost, and proposal quality. Submission through EVMWD’s PlanetBids portal by the September 1, 2026 deadline requires full compliance with Attachment 2 forms, including Conflict of Interest Disclosure, American Iron and Steel Certification, Debarment and Suspension Certification, SAM status, and DBE subconsultant information, along with the executed Professional Services Agreement. Monthly invoicing with progress reports is mandatory, and the District retains audit rights to records for four years after

GEI Consultants, Inc.

POSTED

about 7 hours ago

DEADLINE

Shop Drawing and Product Certification ServicesThe contract requires the preparation and submission of detailed shop drawings, product cut sheets, and compliance documentation specifically for door assemblies prior to any installation activities. This work must be completed to ensure all door systems meet project specifications and regulatory standards, serving as a critical precursor to on-site construction efforts. The deliverables are essential for approval processes and must be accurately compiled to avoid delays or rework. The opportunity is listed under the NAICS code 541330, indicating it falls within architectural and engineering services, and is categorized as a subcontract for the BOE Maintenance agency in Connecticut. The solicitation was posted on August 5, 2026, with a hard deadline of September 1, 2026, at 6:00 PM for responses. While no set-aside designation or point of contact information is provided, interested parties must submit all required materials through the online portal before the deadline to be considered.

BOE Maintenance

POSTED

about 8 hours ago

DEADLINE

Code Compliance and Inspection CoordinationThe contract requires full adherence to all applicable local, state, and national building codes for all work performed, with the contractor responsible for ensuring that every phase of construction or renovation meets regulatory standards. Coordination with government inspectors is mandatory, including scheduling inspections, providing necessary documentation, and promptly addressing any findings or deficiencies identified during inspections. The contractor must manage punch lists efficiently, overseeing the correction of all outstanding items to achieve final approval and project completion without delay. All tasks must be executed with precision and accountability to avoid delays or penalties related to code violations. This subcontract is issued by the City of Smyrna in Georgia under NAICS code 541330, which pertains to architectural services, and is posted for bids with a response deadline of September 4, 2026. The contract does not specify a set-aside classification or target organization type, and details such as the physical location of performance or point of contact are not provided in the available data. Bidders must review the official solicitation link to access full requirements, submission guidelines, and any additional terms not included in the summary data. Failure to comply with code standards or inspection protocols may result in contract termination or financial liability.

POSTED

about 8 hours ago

DEADLINE

RFQ for Professional Engineering Services for Aircraft Hanger

Solicitation # 27-002

The City of Hickory, North Carolina, has issued a request for quotation for professional engineering services related to the design and construction support of an aircraft hangar. The solicitation, numbered 27-002, was posted on July 10, 2026, with responses due by 9:00 PM Eastern Time on July 31, 2026. This procurement is classified as a SLED procurement, indicating it is targeted toward state, local, or education entities, and no specific set aside or NAICS code has been designated. All work is to be performed in North Carolina, with no additional geographical details provided beyond the state. Chad Huncucker serves as the primary point of contact, reachable via email at chunsucker@hickorync.gov or by phone at (828) 358-8473. Interested parties can access the full solicitation details through the public procurement portal at the provided URL.

City of Hickory

POSTED

about 11 hours ago

DEADLINE

Construction, Engineering and Inspection (CEI) Scope of Services for the North 3 Utilities Extension Project (UEP)

Solicitation # 2026-RFP-CP-034-JM

McKim and Creed is serving as the design engineer for the North 3 Utilities Extension Project in the northwest quadrant of Cape Coral, Florida, with the project area bounded by the North Spreader Waterway to the west, Bonefish Canal to the south, Burnt Store Road to the east, and Kismet Parkway West. The project encompasses seven primary contract areas featuring essential infrastructure improvements primarily located west of Burnt Store Road, including the installation and upgrade of utility systems. Additionally, the scope includes the design and reconstruction of major roadways—Tropicana Parkway, Yucatan Parkway, Gulfstream Boulevard, and Kismet Parkway West—along with a segment of Burnt Store Road from 1,000 feet south of Tropicana Parkway to 1,500 feet north of Kismet Parkway. Master Pump Stations 900 and 910 are designated as separate contract components within the broader project. The City is currently in the bidding phase for this effort while the North 1 UEP West is approaching construction completion. The solicitation for Construction, Engineering, and Inspection services is open under number 2026-RFP-CP-034-JM, with responses due by September 3, 2026, and is managed by the City of Cape Coral’s Procurement office through Senior Procurement Specialist Jay Myers.

POSTED

about 11 hours ago

DEADLINE

Southwest Regional Maintenance Center (SWRMC) Hull, Mechanical, and Electrical (HM&E) Fleet Technical Assistance (FTA) Follow-On Engineering Services

Solicitation # N5523626R0007

The solicitation N5523626R0007 for Southwest Regional Maintenance Center (SWRMC) Hull, Mechanical, and Electrical (HM&E) Fleet Technical Assistance (FTA) Follow-On Engineering Services requires contractors to provide comprehensive technical, management, and personnel support services to the U.S. Navy Pacific Fleet, primarily based in San Diego, California. The contract scope centers on delivering intermediate-level ship maintenance, fleet technical assistance, assessment events, and contract management oversight for Navy vessels homeported in or visiting the Southwest region. Offerors must submit proposals through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, with a mandatory deadline of September 4, 2026, at 5:00 PM local time. Proposals must be structured into four volumes: Technical, Past Performance, Cost Proposal, and Contract Documentation, each with specific page limits and formatting requirements, including strict adherence to Microsoft Office or PDF formats with searchable text, no hyperlinks, and Excel files requiring landscape orientation, visible formulas, and minimum 9-point Times New Roman font. Proposals violating these guidelines risk non-evaluation. Evaluation will be conducted under a best-value trade-off approach, with Technical Approach as the most critical factor, assessed through technical, management, and personnel sub-elements rated on an adjectival scale from Outstanding to Unacceptable, directly tied to performance risk. Past Performance is a mandatory pass/fail criterion, where an Unacceptable rating disqualifies an offeror. Cost Proposal, while the least weighted, becomes decisive when technical proposals are closely matched, and must demonstrate cost realism with submitted spreadsheets and supporting narratives. The contract features a base period from March 1, 2027, to February 29, 2028, with up to four optional one-year periods extending through February 29, 2032, involving labor hours for straight-time, overtime, surge capacity, travel, other direct costs, and contract deliverables. All personnel must hold and maintain an active Secret security clearance within six months of onboarding, possess valid DBIDS access for multiple Navy installations, and complete annual training in cybersecurity, CUI, OPSEC, and DoD privacy policies. The contract mandates strict compliance with security protocols including DD Form 254, OCI disclosures, and substitution controls for key personnel, while requiring adherence to Naval standards, OSHA regulations, and CUI protection measures under DoDI 5200.08. Invoicing must

Southwest Regional Maintenance Center

POSTED

about 11 hours ago

DEADLINE

Mobile Detection Deployment Program (MDDP) Support Services

Solicitation # 70RWMD26RFI00000004

The Department of Homeland Security is seeking sources to provide deployable field management and scientific support services under the Mobile Detection Deployment Program, targeting capabilities that enhance on-site detection and operational response. This solicitation, identified by number 70RWMD26RFI00000004, is a sources-sought notice issued by the Departmental Operations Acquisition Division III, with a posted date of August 5, 2026, and a response deadline of August 7, 2026. The work is scoped under NAICS code 541330, which covers scientific research and development services, and no set-aside provisions are applied, making it open to all eligible vendors. The primary place of performance is in Herndon, Virginia, though services may be deployed to various field locations as required. All proposals must be submitted through the SAM.gov portal, with direct inquiries to the primary point of contact, William Grimm, via email or phone. The contract will support DHS operations by providing mobile detection systems and related scientific expertise, ensuring rapid and effective deployment in response to emerging threats. The Office is located in Washington, DC, with a ZIP code of 20528, and all contractual deliverables are expected to meet stringent federal standards for field reliability and operational readiness.

Departmental Operations Acquisition Division Iii

POSTED

about 11 hours ago

DEADLINE