Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

10--JOINT,UNIVERSAL,AFT

Awarded

SPE7L126T0723Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract award pertains to the procurement of 10 Joint Universal AFT systems under solicitation number SPE7L126T0723, issued by the Defense Logistics Agency Land and Maritime, a division of the Department of Defense. The opportunity was posted on May 14, 2026, and falls under NAICS code 333613, which corresponds to the manufacturing of industrial machinery. The award was made to a contractor through a non-set-aside procurement, with no specific small business or disadvantaged set-aside designation applied. Performance location details are not specified, indicating the work may be performed across multiple or unspecified sites. The primary point of contact for the acquisition is Deborah Ferrin, reachable via email at Deborah.Ferrin@dla.mil or by phone at 614-693-1652, based out of the DLA office in Columbus, Ohio, with a postal code of 43218-3990. Additional information and documentation can be accessed through the official SAM.gov workspace link provided.

General Info

Defense Logistics Agency awarded industrial machinery contract to unrestricted competitors in Columbus, Ohio.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

Contract Value

$28,260

NAICS

333613 - Mechanical Power Transmission Equipment ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Awardee

APEX PINNACLE CORPView Profile

Award Issued Date

05/14/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedMay 14

Award Notice

AwardedMay 14

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Deborah Ferrin

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=bb62ae47d93a48a7a384467f768c89d0

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Marking Services

MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

Supply of Critical Application Check Valves

DDSP NEW CUMBERLAND FACILITY

POSTED

about 13 hours ago

DEADLINE

30--ACCUMULATOR,HYDRAULIC

Solicitation # SPE7L1-26-T-10Y1

Solicitation SPE7L1-26-T-10Y1 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of nine hydraulic accumulators, identified by NSN 3040011054026. This procurement is designated as a total small business set-aside under NAICS code 333613. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The items are to be delivered to DLA Distribution Red River in Texarkana, Texas, with a need ship date of March 9, 2027, and an original required delivery date of June 18, 2027. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification to access export-controlled data. The procurement is issued under the First Destination Transportation program, requiring quotes to be submitted based on FOB Origin. Strict quality and packaging standards apply, including compliance with MIL-STD-129, MIL-STD-130N, and MIL-STD-2073-1E, with manufacturer inspection systems meeting SAE AS9003 or ISO 9001 standards. Additionally, items produced via additive manufacturing are ineligible for award unless specifically authorized, and offerors must comply with the Buy American Act and Berry Amendment domestic material restrictions. Payment requests and receiving reports must be processed through the Wide Area WorkFlow system.

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

25--MODIFICATION KIT,VEHIC

Solicitation # SPE7L1-26-T-11C5

This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-11C5, is for the procurement of five vehicular equipment modification kits. The contract is designated as a total small business set-aside and requires delivery within 288 days after the order is placed. Performance is centered in Anniston, Alabama, with the procurement falling under NAICS code 333613. The agreement is subject to rigorous technical and quality standards, including DLA packaging requirements, CMMC Level 2 certification, and strict configuration change management. Because the project involves technical data subject to ITAR or EAR export controls, contractors must have an approved US/Canada Joint Certification Program certification and complete specific DOD export-controlled data training to be eligible. Additionally, the contract mandates compliance with qualified products and manufacturers lists and requires inspection and acceptance at the point of origin.

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

30--CYLINDER ASSEMBLY,ACTU

Solicitation # SPE7LX-26-U-002L

Solicitation SPE7LX-26-U-002L is a request for quotations issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of six linear actuating cylinder assemblies, identified by NSN 3040015346215. This procurement may result in an automated unilateral Indefinite Delivery Contract with a one-year term or until the aggregate total of orders reaches a maximum value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of one unit, with an estimated two orders per year. Delivery is required within 289 days, with shipping terms set as FOB Origin and inspection and acceptance also occurring at the origin. The contractor must adhere to strict quality and packaging standards, including SAE AS9003 or ISO 9001 for inspection systems, ASTM D3951 for packaging, and MIL-STD-129 and MIL-STD-130 for marking and item unique identification. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various federal requirements, such as the Berry Amendment and Buy American Act for domestic materials, and mandates compliance with CMMC Level 2 and DFARS 252.204-7012 for cybersecurity. Quotes must be submitted electronically via DIBBS by September 25, 2026, and SBA-certified HUBZone small businesses may be eligible for a price evaluation preference.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

30--SHAFT,SHOULDERED

Solicitation # SPE7L1-26-T-10Z1

Solicitation SPE7L1-26-T-10Z1 is a fixed-price procurement issued by the DLA Land and Maritime Land Supply Chain for the supply of shoulder shafts (NSN 3040000219562). The requirement consists of two line items: 248 units for general delivery and one unit dedicated to a First Article Test (FAT). This procurement is specifically set aside for SBA-certified Women-Owned Small Business (WOSB) concerns. Quotes must be submitted electronically via the DIBBS system by September 21, 2026. The contract mandates strict quality and technical standards, requiring the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. All parts must undergo Magnetic Particle Inspection per ASTM E1444, with acceptance and rejection limits governed by MIL-STD-1907 Class/Grade A. Deliveries are to be made FOB Origin to the DLA Distribution Depot Hill, with a required delivery date of August 30, 2027. The FAT report must be submitted within 120 calendar days of the contract award. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and payment. The solicitation incorporates several critical regulatory mandates, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to a Boeing Rights Guard License Agreement, requiring strict adherence to data non-disclosure and destruction conditions. Use of additive manufacturing is prohibited unless specifically authorized.

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

30--CYLINDER ASSEMBLY,ACTU

Solicitation # SPE7L3-26-T-247R

Solicitation SPE7L3-26-T-247R is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of two cylinder assemblies, actuator (NSN 3040015346215). The procurement is managed under NAICS code 333613 and requires delivery to DLA Distribution in New Cumberland, Pennsylvania, within 168 days of award. The items must be manufactured according to TDP Rev B Gen 2 and meet quality standards of SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the point of origin. Quotes must be submitted electronically via DIBBS by September 21, 2026. The solicitation includes a price evaluation preference for certified HUBZone small businesses and mandates compliance with the Buy American Act and the Berry Amendment. Packaging must adhere to ASTM D3951 and MIL-STD-129, with specific IUID requirements per MIL-STD-130. Invoicing and receiving reports are to be processed through the Wide Area WorkFlow system. Additionally, the contract incorporates strict cybersecurity requirements, including DFARS 252.204-7012 and CMMC Level 2 certification.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

30--LEVER,REMOTE CONTROL

Solicitation # SPE7L3-26-T-246J

Solicitation SPE7L3-26-T-246J is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 55 units of Remote Control Levers (NSN 3040012549588). The procurement is conducted under the First Destination Transportation program, with a delivery period of 168 days and a required delivery date of June 10, 2027. All quotes must be submitted electronically via the DIBBS system by September 21, 2026. Inspection and acceptance will take place at the point of origin. The contract mandates strict adherence to quality and technical standards, requiring the manufacturer's inspection system to comply with ISO 9001:2015. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with palletization complying with RP001. Key regulatory requirements include the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards, including safeguarding covered defense information. Payment and invoicing must be processed through the Wide Area WorkFlow system. Price evaluation preferences are available for SBA-certified HUBZone small business concerns.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

Idler Pulley Assembly Supply

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Pressure and Temperature Relief Valve Supplier

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

MIL-SPEC Packaging and Delivery Services

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Holding Fixture Fabrication and Supply

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supplier/Dealer of Steering Tie Rod Ends

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturer of Steering Tie Rod Ends

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

Supply of Insulating Compound Electrical (NSN 5970-002957658)

Nitrogenous Fertilizer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M126U6073

DLA Land and Maritime is soliciting quotes for the procurement of 3,398 seals under NSN 5330014964243. This requirement may result in an Automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 509 units, with an estimated two orders per year. Delivery is required within 97 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 5F573 233109509643891. This is an electronic RFQ under NAICS code 339991, and all quotes must be submitted electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available. Interested parties should coordinate through the DLA Land and Maritime office in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--PACKING WITH RETAINER

Solicitation # SPE7LX26U002A

This procurement request from DLA Land and Maritime is for NSN 5330001438722 Packing with Retainer under solicitation SPE7LX26U002A. The requirement consists of an initial quantity of 76 units with a delivery window of 97 days after receipt of order. This is a source controlled drawing item, and the items must strictly adhere to the cited drawings and military specifications. Approved sources are limited to CAGE codes 07060 and 99193. The solicitation may result in an Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. There is a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Shipping will be directed to various CONUS and OCONUS DLA Depots. This opportunity is a total set-aside for small businesses under NAICS code 339991, and all quotes must be submitted electronically by September 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

59--CUSHION,EAR

Solicitation # SPE7M126U6067

DLA Land and Maritime is soliciting quotes for the procurement of ear cushions under NSN 5965014857173. This is a total small business set-aside under NAICS code 334310, with an initial requirement of 279 units to be delivered within 83 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 41 units and an estimated two orders per year, with shipments destined for various CONUS and OCONUS DLA depots. Approved sources for this requirement are identified as 1PNR4 40243G-02 and 1PNR4 40243G-07. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation, specifications, or drawings are available, and all submissions must be handled through the electronic portal.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

53--TRACK,SLIDING DOOR

Solicitation # SPE7L126U0721

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of sliding door tracks under NSN 5340015973964. This requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The initial request is for 43 units with a delivery window of 133 days after the order is placed. Items are to be shipped to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of six units. All quotes must be submitted electronically by the deadline of September 24, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7L126U0720

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of helical compression springs under NSN 5360013853389. This request for quotation may result in an Automated Indefinite Delivery Contract with a term of one year or until a total expenditure of 350,000.00 is reached. The contract specifies a guaranteed minimum quantity of one unit, with an estimated one order per year. Delivery is required within 104 days after the order date to various CONUS and OCONUS DLA Depots. Approved sources for this procurement include 07309 112129029 and 07309 112159005. All responsible sources are invited to submit electronic quotes by the deadline of September 24, 2026. Specifications and drawings are not provided as separate documents, and the solicitation is available exclusively through the electronic link provided in the notice.

Spring Manufacturing

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126U6071

DLA Land and Maritime is soliciting quotes for the procurement of 75 circuit card assemblies under NSN 5998014971477. This requirement may result in an automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Delivery is required within 160 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 0KPC5 C98327-1. This is an RFQ process where all responsible sources may submit electronic quotes by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the specified government channels.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX26U002B

DLA Land and Maritime is soliciting quotes for the procurement of butt hinges under NSN 5340016609476. This request for quote may result in an automated indefinite delivery contract with a one year term or until a total of 350,000.00 is reached. The initial requirement specifies a quantity of 48 units to be delivered within 116 days after the order is placed, with a guaranteed minimum quantity of 7 items. Shipments will be directed to various CONUS and OCONUS DLA depots. This opportunity is designated as a total small business set aside under NAICS code 332510. The approved source is identified as 94222 E6-10-420-50. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS