Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Sources Sought opportunity was posted on February 28, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

12 Amp Power Supply Sources Sought Synopsis

Closed
FA8206-17-SSS-0003Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335311
New
International
Design, Supply and Installation of the STATCOM
Solicitation # 25065
The British Columbia Hydro and Power Authority is conducting a Request for Information under solicitation number 25065 for the design, supply, and installation of a Static Synchronous Compensator (STATCOM) solution. This initiative is intended to support a major load project for a large industrial customer located within the North Thompson and Nicola regions of British Columbia. The project scope involves the design, factory simulation testing, supply, and installation of four STATCOMs at both new and existing substations. Technical requirements specify that equipment must be 24 MVAR or above with a base voltage of 138kV, and the STATCOM controller must be fully compatible with an existing 20-year-old ABB controller for a coordinated operation period of six to eight months. The procurement requires adherence to North American Standards, specifically IEEE C57.12.00 and CSA C88, with seismic qualification according to IEEE 693. Key deliverables include testing and commissioning, on-site training with manuals, and the provision of spare parts and special tools. This current process is for information gathering only and does not constitute a pre-qualification or shortlisting event. BC Hydro intends to issue a formal Request for Proposal in the second quarter of 2027, with a target contract award in the fourth quarter of 2027. Responses must be submitted electronically via BC Bid or to the designated contact, Man Kit Suen, by the deadline of November 17, 2026.
British Columbia Hydro and Power Authority

POSTED

about 18 hours ago

DEADLINE

in 28 days
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY-SWITCH,
Solicitation # SPE4A6-27-T-5391
Solicitation SPE4A6-27-T-5391 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of four electrical switch cable assemblies, identified by NSN 6150-01-733-1778. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of August 18, 2027, and a need ship date of March 21, 2027. The contract specifies a delivery period of 144 days and requires FOB Origin terms. Compliance requirements are stringent, including mandatory adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with a specific requirement for a cap or plug on one end of the assembly. Quality assurance must meet ISO 9001:2015 standards, and origin inspection is required. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization to access export-controlled data subject to ITAR or EAR regulations. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act and the Berry Amendment. A price evaluation preference is available for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 27, 2026, and should be submitted via the DLA-BSM Internet Bid Board System.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-27-T-5390
Solicitation SPE4A6-27-T-5390, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of three branched wiring harnesses (NSN 6150-01-676-3571). The items must be delivered with caps and plugs, coiled to 10 x 10, and shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The delivery window is 160 days after the order, with a need ship date of April 6, 2027. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical data is subject to ITAR and EAR export controls, and the contractor must comply with CMMC Level 2 and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation is based on price, with a specific preference for certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award. The procurement also incorporates standard FAR and DFARS clauses regarding the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment. Item Unique Identification is not required for this specific order.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-27-T-1087
Solicitation SPE7M1-27-T-1087 is a request from the DLA Weapons Support Maritime Supply Chain for the procurement of eight power transformers (NSN 6120-01-595-7610). The items are identified as Commercial Off The Shelf (COTS) and must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 20, 2025, with a need ship date of August 19, 2025. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the procurement may be subject to automated award. The contract mandates strict adherence to military standards for packaging, marking, and preservation, specifically MIL-STD-2073-1E, MIL-STD-129, and MIL-E-17555. Technical and quality requirements are governed by RA001 and the DLA Master List, while RQ011 requires the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Compliance requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must provide representations regarding covered defense telecommunications equipment and safeguarding covered defense information per DFARS 252.204-7012. While the NAICS code is 335311, the solicitation utilizes a HUBZone price evaluation preference. Alternate offerors are required to submit a complete data package for any proposed alternate parts.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-5392
Solicitation SPE4A6-27-T-5392 is issued by the Defense Logistics Agency for the procurement of one special purpose electrical cable assembly, identified by NSN 6150-01-564-6021. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery window of 411 days after order and a required delivery date of October 31, 2027. The procurement is conducted under the First Destination Transportation program, with both inspection and acceptance occurring at the origin. Compliance requirements are stringent, necessitating that manufacturers maintain an ISO 9001:2015 certified quality system. Technical data is subject to ITAR or EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program certification. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and the contract mandates Contractor First Article Testing with a 14-day notice to the government prior to shipment. Packaging must adhere to MIL-STD-2073-1E and specific drawing requirements, while marking must comply with MIL-STD-129. The award process includes a price evaluation preference for SBA-certified HUBZone small businesses and may favor offers with shorter delivery timelines. The contract incorporates various FAR and DFARS clauses, including those for the Buy American Act, Berry Amendment compliance, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 7 days

General Info

Agency

N/A

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

8 updates
PhaseClosed
Posted

Sources Sought

Notice updated

Response deadline changed from Mar 29, 2017 to Apr 20, 2017. The notice description changed. The point of contact changed.

Notice updated

Notice type changed from Sources Sought to Event. Response deadline changed from Apr 20, 2017 to Apr 6, 2017. The notice title changed. The notice description changed. The point of contact changed.

Notice updated

Notice type changed from Event to Sources Sought. Response deadline changed from Apr 6, 2017 to Apr 20, 2017. The notice title changed. The notice description changed. The point of contact changed.

Notice updated

Notice type changed from Sources Sought to Event. Response deadline changed from Apr 20, 2017 to Apr 6, 2017. The notice title changed. The point of contact changed.

Response Deadline

Deadline has passed

Notice updated

Notice type changed from Event to Sources Sought. Response deadline changed from Apr 6, 2017 to May 18, 2017. The notice title changed. The notice description changed. The point of contact changed.

Notice updated

The notice description changed.

Notice updated

Response deadline changed from May 18, 2017 to Jun 2, 2018. The notice description changed. The point of contact changed.

Notice updated

Response deadline changed from Jun 2, 2018 to Jun 16, 2018. The notice description changed.

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts1 person available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A

Full Description

Show more
1. NOTICE: This is not a solicitation but rather a Sources Sought Synopsis to determine potential sources for information and planning purposes only. 1.1 The purpose of this Sources Sought is to conduct market research to determine if responsible sources exist, to assist in determining if this effort can be competitive and/or a total Small Business Set-Aside. The proposed North American Industry Classification Systems (NAICS) Code is 335311 which has a corresponding Size standard of 750 employees. The Government will use this information to determine the best acquisition strategy for this procurement. The Government is interested in all business sizes including small businesses; such as 8(a), Service-Disabled Veteran Owned, Hubzone, and Women-Owned small business concerns. The government requests that interested parties respond to this notice if applicable and identify your business size status to the identified NAICS code. Additionally, please provide any anticipated teaming arrangements, along with a description of similar services offered to the Government and to commercial customers for the past three years. Any responses involving teaming agreements should delineate between the work that will be accomplished by the prime and the work accomplished by the teaming partners. 2. Program Details: The 414th Supply Chain Management Squadron is issuing this sources sought synopsis as a means of conducting market research to identify parties having an interest in, and the resources to support, the design and qualification of a 12 Amp Power Supply, Part Number 25-22620, and Power Supply Test Stand, Part Number To Be Determined (TBD). Qualification and performance requirements for the Power Supply are described in the draft specification included with this synopsis. Due to the critical nature of this part, the part is purchased by the Air Force via a "Source Control Drawing". Successful testing of a supplier's design is required for the supplier to be listed a qualified source on the Air Force source control drawing. Note that the Air Force source control drawing for this part is proprietary and contains technical data whose export is restricted by the Arms Export Control Act (Title 22, U.S.C. 2751 et seq.) or the Export Administration Act of 1979, as amended, Title 50, U.S.C., App. 2401 et seq. Violation of these export control laws is subject to severe criminal penalties. If your organization has the potential capacity to perform these contract services, please provide the following information: 1) Organization name, address, email address, Web site address, telephone number, and size and type of ownership for the organization; and 2) Tailored capability statements addressing the particulars of this effort, with appropriate documentation supporting claims of organizational and staff capability. If significant subcontracting or teaming is anticipated in order to deliver technical capability, organizations should address the administrative and management structure of such arrangements; and 3) Technical approach to meeting the detailed qualification requirements described in the Performance Specification; and 4) Rough Order of Magnitude (ROM) price estimate to accomplish the tasks described in the Statement of Work (SOW). The government will evaluate market information to ascertain potential market capacity to 1) provide 12 Amp Power Supply and Power Supply Test Stand qualification and/or production; 2) secure and apply the full range of corporate financial, human capital, and technical resources required to successfully perform similar requirements; and 3) implement a successful project management plan which includes: compliance with tight program schedules; cost containment; meeting and tracking performance; hiring and retention of key personnel and risk mitigation. BASED ON THE RESPONSES TO THIS SOURCES SOUGHT NOTICE/MARKET RESEARCH, THIS REQUIREMENT MAY BE SET-ASIDE FOR SMALL BUSINESSES OR PROCURED THROUGH FULL AND OPEN COMPETITION, and multiple awards MAY be made. Telephone inquiries will not be accepted or acknowledged, and no feedback or evaluations will be provided to companies regarding their submissions. Submission Instructions: Interested parties who consider themselves competent to perform the above-listed qualification and/or production are invited to submit a response to this Sources Sought Notice by 31 March 2017. All responses to this Sources Sought Notice must be emailed to Mr. Ashton Jones, Contracting Officer, ashton.jones.1@us.af.mil. If you have technical questions concerning this opportunity please contact: Ben Harris, 414 SCMS/GUEA, benjamin.harris.15@us.af.mil Attachment(s): two (2) 1: 12 Amp Power Supply SOW-CDRLs 2: Model Spec 12 Amp Power Supply Drawer Rev 2

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS