COVER, FIRE CONTROL INS

COVER,FIRE CONTROL INSTRUMENT
ITEM NAME COVER, CLOTH, PROTECT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
" LIST OF NOTES AND EXCEPTION SFOR DRAWING NO. 10549868 REVISION F
NSN: 1240-00-084-0280 COVER QR # F515-11
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
QUOTING CLOTH, DUCK, COTTON, NO.8, TYPE 1 PER CCC-C-419, TRATED PER
CCC-C-428, TYPE 1, CLASS 1, COLOR: CAMOUFLAGE GREEN 34094 IN LIEU OF
COLOR: OLIVE DRAB NO. 7.
QUOTING 5/8" WIDE WEBBING, TYPE 2, CLASS 4 PER MIL-W-530, COLOR: OLIVE
DRAB NO.7 IN LIEU OF 5/8" WIDE WEBBING, TYOE 2, CLASS4 PER MIL-W-530,
COLOR: GREEN 483 PER CCC-D-950, TYPE 1, CLASS B. NOTE: SPECIFICATION
CCC-D-950 IS FOR COTON CLOTH, AND IT DOES NOT APPLY TO WEBBING.
QUOTING 2" WIDE WEBBING TYPE 2, CLASS 4 PER MIL-W-530, COLOR: OLIVE
DRAB NO.7 IN LIEU OF 2" WIDE WEBBING, TYPE 2B, CLASS 4 PER MIL-W -530,
COLOR GREEN 483 PER CCC-D-950, TYPE 1 , CLASS B. NOTE: SPECIFICATION
CCC-D-950 IS FOR COTTON CLOTH, AND DOES NOT APPLY TO WEBBING.
QUOTING STANDARD MANUFACTURING TOLERANCES: 0<2" +/-1/8" , 2<10" +/
1/4", 10<24" +/3/8", 24"<40" +/1/2" AND OVER 40" +/3/4" IN LIEU
OF THE TOLERANCES GIVEN ON THE DRAWING."
THE USE OF ANY CLASS I OZONE-DEPLETING SUBSTANCE
(ODS) IN THE DESIGN, MANUFACTURING, TESTING,
CLEANING, OR ANY OTHER PROCESS FOR THIS ITEM
UNDER ANY MILITARY OR FEDERAL SPECIFICATION,
STANDARD OR DRAWING REFERENCED IN THIS ITEM
DESCRIPTION IS "PROHIBITED" UNLESS THE SEPARATE
SPE7M1-27-U-0891
SECTION B
WRITTEN APPROVAL OF THE CONTRACTING OFFICER IS
OBTAINED. THIS PROHIBITION SUPERSEDES ALL
SPECIFICATION REQUIREMENTS BUT DOES NOT
ALLEVIATE ANY PRODUCT PERFORMANCE REQUIREMENTS.
THIS DOES NOT APPLY TO COMMERCIAL ITEMS, AS
DEFINED IN "FAR 11.001" OR TO PART-NUMBERED
ONLY ITEMS.
THE TECHNICAL DATA CITED IN THIS SOLICITATION IS
NOT COMPLETE, HOWEVER, THE ITEM PROVIDED MUST
MEET THE REQUIREMENTS OF THE CITED TECHNICAL
DATA IN ADDITION TO THE REQUIREMENTS OF THE
PART NUMBERED ITEM LISTED ON THIS SOLICITATION.
(19200) 10549868 REV F DD
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment PARTS LIST
CRITICAL APPLICATION ITEM
CR DANIELS INC 15814 P/N 10549868 CR DANIELS INC 15814 P/N 8267760 MM REIF LTD 1KNH1 P/N 10549868
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000246471 0001 EA 31.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:1240000840280
DELIVERY (IN DAYS):0056
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING
SPE7M1-27-U-0891
SECTION B
PR: 1000246471 PRLI: 0001 CONT’D
REQUIREMENTS FOR PROCUREMENT

SPE7M1-27-U-0891 NSN/Part Number: 1240-00-084-0280 Quantity: 31 EA Purchase Request: 1000246471QTY: 31 Delivery: 56 days ADO