This Government Contract opportunity was posted on August 18, 2010. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

13--Ammunition and Explosives

Awarded

FA8213-09-R-77025Federal

Submission Closed08/18/2010, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325920

New

Federal

Production of Small Unmanned Aircraft Systems (sUAS) Lethality Payloads at Pine Bluff Arsenal

Solicitation # W519TC27CSUAS

The Department of War and Army Materiel Command are seeking partnership solutions via white papers for the production of small Unmanned Aircraft Systems (sUAS) lethality payloads and Electronic Safe and Arming Devices (ESAD) at Pine Bluff Arsenal (PBA). This initiative is a market research effort to establish a Public-Private Partnership (P3) under 10 U.S.C. 7544, aiming to modernize government facilities to Industry 4.0 and 5.0 automation standards. The government provides approximately 100,000 square feet of production and storage capacity, along with logistical, engineering, and safety support. In return, the selected industry partner must provide 100% of the capital expenditures for facility upgrades and equipment, which will become government property upon installation. The proposed cooperative arrangement utilizes a Build-to-Operate model where the private partner manages the facility until recovering their investment and profit, after which operational control transitions back to the government. The partner is guaranteed a portion of the facility's capacity for commercial use, provided it does not interfere with military requirements. The selection process consists of three phases: an initial white paper submission due by December 14, 2026, a mandatory on-site visit at Pine Bluff Arsenal for top candidates, and a final comprehensive white paper submission. Evaluation will be based on technological innovation in automation, financial viability to cover all capital expenditures without government subsidy, and the ability to maximize existing PBA resources.

POSTED

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

POSTED

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

POSTED

DEADLINE

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

POSTED

DEADLINE

Cap Blasting Non-Electric M7

Solicitation # W8703-270042/A

The Department of National Defence for the Government of Canada is soliciting offers for the procurement of Cap Blasting Non-Electric M7 units to be used for military demolition purposes. The requirement consists of 13,000 total units delivered in two phases to the Canadian Forces Ammunition Depots in Dundurn, Saskatchewan, and Angus, Ontario. The first delivery of 6,500 units is due by November 1, 2027, and the second delivery of 6,500 units is scheduled between September 1 and November 30, 2028. The goods must be delivered Delivered Duty Paid (DDP) and must adhere to strict technical specifications, including a length between 2.25 and 2.35 inches, a 99.9 percent functional reliability rating, and the ability to operate in temperatures ranging from -50°F to 125°F. This procurement is subject to the Controlled Goods Program and requires compliance with MIL-PRF-32294, MIL-STD-331D, and ISO 9001:2015 quality management standards. All items must be asbestos-free per SOR/2018-196. Evaluation is based on a phased compliance approach where offers must meet mandatory technical criteria and provide a limited Technical Data Package to be considered recevable. The contract includes rigorous inspection and acceptance protocols, requiring the submission of lot acceptance test results and specific release documentation such as DD Form 250 or CF 1280. Proposals must be submitted in Canadian dollars by October 22, 2026, and must include the required Offer Submission and Offeror Declaration forms.

Department of National Defence

POSTED

14 days ago

DEADLINE

in 6 days

AI Contract Overview

Under solicitation FA8213-09-R-77025, the Department of Defense is procuring various ammunition and explosive components for delivery to Tinker Air Force Base, Oklahoma, by January 31, 2010. The order consists of multiple specialized items, including cartridge actuated initiators for B-1B Bombers, linear shaped charge assemblies, and various impulse cartridges and initiators used for seat retraction thrusters. The total quantity across the primary listed items includes 28 initiators, 16 charge assemblies, 40 impulse cartridges, and 64 units each of specific impulse cartridges and SRT initiators. This procurement is subject to strict quality control and engineering source approval by the design control activity to ensure the technical integrity of the parts. Because the approved sources retain essential manufacturing knowledge and data rights not economically available to the government, any alternate source must undergo a rigorous qualification process approved by the cognizant government engineering activity. The solicitation was conducted via electronic procedure, with awards contingent upon the offeror meeting all qualification requirements in accordance with FAR clause 52.209-1.

General Info

Agency

N/A

Contract Value

$631,576

NAICS

325920 - Explosives Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

PACIFIC SCIENTIFIC ENERGETIC MATERI,3601 UNION RD,HOLLISTER CA95023-9635

Award Issued Date

12/02/2009, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseAwarded

PostedJan 30

Presolicitation

Notice updatedFeb 3

The notice description changed.

Type ChangedMar 6

Presolicitation → Solicitation

AwardedDec 2

Contract was awarded

Submission Closed

08/18/2010, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyN/A

ContactsNo contacts available

OfficeN/A

Organization / Agency

N/A

Office AddressN/A

ContactsNo contact information available

Full Description

PR Number(s): FD20200977025Item: 0001NSN: 1377012297600ESES TIME DELAY, 1.60 SECP/N: 816852-11, Description: INITIATOR,CARTRIDGE ACTUATED|4.000 INCHES NOMINAL|B-1B BOMBER|6106650|TIME DELAY|AUTOMATIC|INCLUDED|1.6|1377-MU17|UN0367|EX1999060100|THREAD SIZE B 0.625-18UNF-3B;THREAD SICE C 0.5-20UNF-3B|1,4S|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|FUZES, DETONATING|1.4Quantity: 28.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK.,73145-5000. Delivery: 31 JAN 2010, 28.00 PR Number(s): FD20200977025Item: 0002NSN: 1377012363517ESES CHARGE ASSY, LINEARP/N: 816949-4, P/N: L325C2012, Description: CHARGE ASSEMBLY,SHAPED|B-1B BOMBER|FLEXIBLE LINEAR|11|EXWT|CHARGE ASSY,LINEAR|1377-SR67|UN0410|EX1993070046|0.000000 STORAGE POUNDS AND 0.079400 TRANSPORTATION POUNDS|32.0 IN LG;BOOSTER SHELL LOADED|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|FUZES, DETONATING|1.4DQuantity: 16.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK.,73145-5000. Delivery: 31 JAN 2010, 16.00 PR Number(s): FD20200977025Item: 0003NSN: 1377012797179ESES CARTRIDGEP/N: 817141-3, P/N: L320C2003, Description: CARTRIDGE,IMPULSE|ANY ACCEPTABLE|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT RATED|NOT INCLUDED|NOT INCLUDED|EXWT|1377-MT93|UN0323|EX1997030113|0.000000 STORAGE POUNDS AND 0.002000 TRANSPORTATION POUNDS|DETONATION VIA GAS PRESSURE; U/O PIN PULLER 816875-3/816876-3|1.4|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|PACS|CARTRIDGES, POWER DEVICE|1.4SQuantity: 40.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK.,73145-5000. Delivery: 31 JAN 2010, 40.00 PR Number(s): FD20200977025Item: 0004NSN: 1377012797180ESES CARTRIDGE IMPLULSEP/N: 816951-5, P/N: L287C2033, Description: CARTRIDGE,IMPULSE|ALUMINUM ALLOY|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|NOT INCLUDED|CARTRIDGE,SEAT,RETRACTION THRUSTER|1377-MT92|UN0323|EX1999080137|U/O SEAT RETRACTION THRUSTER 816737-5|1.4S|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|PACS|CARTRIDGES, POWER DEVICE|1.4Quantity: 64.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK.,73145-5000. Delivery: 31 JAN 2010, 64.00 PR Number(s): FD20200977025Item: 0005NSN: 1377012797181ESES INITIATOR, SRTP/N: 816952-1, P/N: 816952-3, P/N: L287C2033, Description: INITIATOR,CARTRIDGE ACTUATED|USED ON SEAT RETRACTION THRUSTER|INCLUDED|INITIATOR ASSY,OUTPUT|1377-MT10|UN0276|EX1999080138|0.0403 STORAGE POUNDS AND 0.0403 TRANSPORTATION POUNDS|CONTAINS 1 EA RETAINER,INITIATOR 817259-1;1 EA INITIATOR SUBASSY 817288-1;COLOR GRAY|1.4C|1.4 DEPARTMENT OF DEFENSE HAZARD CLASS DIVISION|PACS|CARTRIDGES, POWER DEVICE|1.4Quantity: 64.0000 EA Destn: FV2037,TINKER AIR FORCE BASE,OK.,73145-5000. Delivery: 31 JAN 2010, 64.00 Plus 0003 additional items Electronic procedure will be used for this solicitation. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements are cited in each individual solicitation.To include all required reports and data.This part required engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing knowledge by the qualified source(s) require acquisition of the part from the approved source(s). The approved source(s) retain data rights, manufacturing knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application.