Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

1356 - 01-077-6037 SW94 Valve, Scuttler

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of SW94 Scuttler Valves under NAICS code 325920 for the Department of Defense, specifically managed by the Navsup Weapon Systems Support Mech in Mechanicsburg, Pennsylvania. The current contract, held by Cartridge Actuated Devices Inc, is valued at 441,876.96 dollars and is structured as a firm fixed price agreement. The existing contract is slated to end on August 30, 2026, and was previously designated as not competed. There is a medium confidence level that this requirement will be recompete-likely. Interested parties can contact McKenzy Harris for further information regarding this pre-forecast opportunity.

General Info

DoD recompete for SW94 Scuttler Valves, firm fixed price, ending August 30, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

325920 - Explosives Manufacturing

Place of Performance

PA, 070043311, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 2

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

McKenzy Harris

contact@example.gov

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: N0010425CK013 Incumbent: CARTRIDGE ACTUATED DEVICES INC Contract Value: $441,876.96 Potential End Date: 2026-08-30T00:00:00.000Z Competition: NOT COMPETED Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 50/100)
1356-01-077-6037 SW94 Valve, Scuttler

Similar Contracts

Same NAICS industry code

MJU-76/B Flare, Countermeasure

Solicitation # FA821326RB005-Solicitation

The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 year

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

in about 1 month

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

FY27-31 WC864 Ball Powder

Solicitation # W15QKN26RA085

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Raw Material for NAVSEA Spacer 5671439

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacture of 2nd Stage Tie Rod Spacers

POSTED

about 3 hours ago

DEADLINE

VALVE STEM, TTV

Solicitation # N0010424QBM87

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # N0010427QYA52

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QFE70

This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

31--BEARING,BALL,ANNULA

Solicitation # N0010426QYAHD

Ball and Roller Bearing Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

Solicitation # N0010427QYA53

Solicitation N00104-27-Q-YA53 is a Request for Quotations issued by the NAVSUP Weapon System Support (NAVSUP WSS) for the repair of 17 power supply units, identified by NSN 6130-01-535-3578 and Part Number 600-42010. The scope of work involves the teardown, evaluation, repair, and modification of these units to meet the operational and functional requirements of CAGE 04801. The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. Delivery is required within 30 days, with FOB Destination terms. Key requirements for offerors include mandatory Government source approval prior to award and the provision of a signed letter of authorization if the offeror is not the Original Equipment Manufacturer. The contract mandates strict adherence to quality standards, including ISO 9001 and MIL-STD-130 for identification, and requires that materials be mercury-free. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labels and palletization. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Evaluation of quotes will be based on the Supplier Performance Risk System (SPRS), assessing item, price, and supplier risk.

Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 1 month

59--CONNECTOR,ELECTRIC

Solicitation # N0010426RFE40

Solicitation N00104-26-R-FE40, issued by NAVSUP Weapon Systems Support, is for the procurement of electric connectors (NSN 1HM 5935-01-542-5968). These components are designated as Critical Safety Items (CSI) and Special Emphasis material because their failure could result in serious personnel injury, loss of life, or the loss of a ship. Due to this criticality, the contract mandates rigorous quality controls, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The contract requires extensive testing and certification. Both contractor-led and government-led destructive First Article Testing (FAT) are mandatory, with government testing conducted at the Portsmouth Naval Shipyard. Key technical requirements include the use of QQ-N-286 material for specific penetrator and receptacle components, strict adherence to MIL-DTL-24231, and the prohibition of molybdenum disulfide thread lubricants. Comprehensive certifications are required for production tests, dye penetrant inspection, liquid penetrant inspection, and ultrasonic inspection of starting materials. Award will be made to a single technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. All deliverables must be processed through the Wide Area Workflow (WAWF) system, and a detailed Certificate of Compliance is required to ensure full traceability and adherence to all invoked specifications and drawings. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129 standards.

Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # N0010426QTA53

This contract solicits repair services for a specific circuit card assembly, identified by Cage Code 23905 and reference number 949A9131-101. It requires the contractor to perform repairs in accordance with detailed technical specifications, including adherence to original manufacturer manuals, standards, drawings, and applicable quality requirements. The contractor must ensure all repaired items meet functional and operational standards, complete inspection and testing procedures, and properly mark the items per MIL-STD-130 guidelines. The government mandates a Repair Turnaround Time (RTAT) of 197 days, measured from the physical receipt of the asset to final government acceptance, and requires source inspection. Failure to meet RTAT deadlines may result in negotiated price reductions, while excusable delays will not incur penalties. The contract is structured as a firm-fixed-price arrangement with options for increased quantities at the same unit price. Freight terms specify FOB Origin with shipment handled by the Navy via the Commercial Asset Visibility system. Documentation and certifications must be maintained and accessible, and changes to design or parts require prior government approval, except for designated part number changes under a specified code. The solicitation includes requirements for contractor representations and certifications and references cybersecurity maturity model certification obligations effective November 2025. Offers must include pricing, RTAT, and capacity information, and only authorized distributors for the original manufacturer’s items will be considered for award. The Department of Defense office overseeing this contract is located in Mechanicsburg, PA, with contact available for clarification until the response deadline.

Bare Printed Circuit Board Manufacturing

POSTED

about 3 hours ago

DEADLINE

48--VALVE,LINEAR,DIRECT

Solicitation # N0010427RFA12

POSTED

about 3 hours ago

DEADLINE

in about 2 months

53--HOIST STRAP

Solicitation # N0010426QAB90

Solicitation N0010426QAB90 is a total small business set-aside, fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture of three Hoist Strap Assemblies (P/N: 5641754-303, NIIN: LWM046472). The contractor must ensure all materials are assembled in strict adherence to Drawing 5641754 Rev E and comply with MIL-STD-130 for marking and MIL-STD-973 for configuration control. Delivery is required within 90 days on an FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with the government utilizing SPRS risk assessments to evaluate item, price, and supplier performance risks. The contract mandates Government Source Inspection per FAR 52.246-2, with inspection and acceptance occurring at the origin. Contractors are required to maintain all inspection records for the duration of the performance period and for 365 calendar days following final delivery. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific packing levels based on the shipment destination. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All hazardous material submissions must include GHS-compliant labels and Safety Data Sheets sent to NAVSUP WSS Code N242.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010427QUA36

POSTED

about 3 hours ago

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

1377 - 1377-01-255-1650

Solicitation # N0010423RK050

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

Explosives and Explosive Supplies

Solicitation # DJA-25-AEET-PR-0186

POSTED

over 1 year ago

CLOSED

over 1 year ago

13--SEQUENCER,EXPLOSIVE

Solicitation # N0038325QN203

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

1377 - 01-423-2502 SQ03 Impact Initiator, 1377-01-423-1008 SQ04 Front Mount Initiator, and 1377-01-439-0910 SR94 Impulse Cartridge

Solicitation # N0010424RK005

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

13--CARTRIDGE,OPERATING - AND OTHER REPLACEMENT PARTS

Solicitation # N0038325QC299

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

Battlefield Effect Simulators Phase II

Solicitation # W15QKN-25-X-11N7

POSTED

over 1 year ago

CLOSED

over 1 year ago

Explosives and Explosive Supplies

Solicitation # ATF02072025BW

POSTED

over 1 year ago

CLOSED

over 1 year ago

1356-01-294-6889 TH01 Igniter, MK288 MOD 1

Solicitation # N0010424RK070

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

1355-01-273-1239 T181, Nose Cap (Fixed Wing) and 1355-01-273-1240 T182, Nose Cap

Solicitation # N0010425RK004

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

1377 - 1377-01-492-6460 and 1377-01-492-6470 WB55 and WB 56 JAU-76/A Initiator, Cartridge Actuated and JAU-77/A Initiator, Cartridge Actuated

Solicitation # N0010425RK090

Navsup Weapon Systems Support Mech

POSTED

almost 2 years ago

CLOSED

over 1 year ago

B-1 Mode Selector, AND Gates & Cabin Decompression Sensor, and F-15 Internal Canopy Jettison Initiators

Solicitation # FD2020-25-50072

FA8213 Aflcmc Ebhk

POSTED

almost 2 years ago

CLOSED

over 1 year ago

13--NRP,BOTTLE MONEX FI

Solicitation # N0038325QC242

Navsup Weapon Systems Support

POSTED

almost 2 years ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS