Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

1377 - 1377-01-211-7211; MJ21; CARTRIDGE; CCU-92/A

Awarded
N0010425RK030Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of the NOMEN CARTRIDGE, ELECTRICAL, CCU-92/A, with the solicitation number N0010425RK030 posted by the Department of Defense's Navsup Weapon Systems Support Mech. The procurement is restricted to Pacific Scientific in Arizona, and no paper copies will be provided, with a limited drawing package available, though drawings are not accessible on CD. The items being acquired are classified as explosive, requiring a Safety Survey prior to procurement, and specific details regarding explosive weight and class are outlined in the solicitation. The response deadline for proposals is April 10, 2025, and interested parties can contact the designated point of contact via email or phone for further information. The contract is managed from the office located in Mechanicsburg, Pennsylvania.

General Info

Navy awarded $319,841 contract to Pacific Scientific for CCU-92/A cartridges, active until 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

Contract Value

$949,839

NAICS

325920 - Explosives Manufacturing

Place of Performance

PA, USA

Set-Aside

NONE

Awardee

PACIFIC SCIENTIFIC ENERGETIC MATERIALS CO CALIFORNIA LLC

Award Issued Date

Documents

2

N0010425RK0301.06_CADPAD_Item_Marking_Instruction_Ver_1.6.pdf

PDF

N0010425RK0301.06_RFV_Form_DD1694_Example_Only_dated_2_14_24.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

4 updates
PhaseAwarded
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Notice updated

Notice details unchanged. Attachments may have changed.

Deadline changed

Response deadline changed from Apr 10, 2025 to May 6, 2025.

Notice updated

Notice details unchanged. Attachments may have changed.

Justification (J&A)

Justification & Approval published

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
Taytiana Figueroa
contact@example.gov

Full Description

Show more
NSN: 1377-01-211-7211 Quantity/Unit of Issue: 269 LAT and CDRLS are FOB Destination. Deliverable items are FOB Origin. Delivery Schedule: 345 DADC Option: Up to 200 percent Paper copies of the solicitation will not be provided by the Navy. Production lot testing, contractor data requirements list, FOB origin and destination apply. Except as modified or amplified in the RFP this item contains explosives and a pre-award safety survey will be required. DFARS 252.223-7002, Safety Precautions for Ammunition and Explosives applies. Acquisition contains explosive ordnance items which require special security, safety and transportation clauses, which may be found in Section I. Technical data will be available for viewing on the web at SAM.gov. The proposed contract action is for supplies for which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302. However, all responsible sources may submit a capability statement with an offer, that if received in a timely manner, will be considered. The solicitation will be available no earlier than the response date for this synopsis. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify to the contracting officer their interest and capability to satisfy the Government’s requirement with a commercial item within 15 days of this notice.

Similar Contracts

Same NAICS industry code

NAICS: 325920
New
Federal
MJU-76/B Flare, Countermeasure
Solicitation # FA821326RB005-Solicitation
The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.
FA8213 Aflcmc Ebhk

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 325920
New
Federal
1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1
Solicitation # N0010426RK058
Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 325920
New
Federal
Pre-Solicitation Synopsis - B-1 Parts Reman FY27
Solicitation # FY27_B-1_Parts_Reman_Synopsis
The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.
FA8213 Aflcmc Ebhk

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 325920
New
Federal
Request for Information - Energetics Center of Excellence
Solicitation # W519TC-26-R-0019
Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.
W6QK Acc-Ri

POSTED

2 days ago

DEADLINE

in 4 days
View Details
NAICS: 325920
New
Federal
1377 - MT06 Cartridge Actuated Initiator
Solicitation # N0010427RK007
NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 325920
New
Federal
MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89
Solicitation # N0010427QK001
Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in about 1 year
View Details
NAICS: 325920
Federal
Thin Layer Explosives (TLX)
Solicitation # W519TC26RA057
Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.
W6QK Acc-Ri

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
Federal
MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE
Solicitation # FA821327RB00x
AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.
FA8213 Aflcmc Ebhk

POSTED

7 days ago

DEADLINE

in 8 days
View Details
NAICS: 325920
Federal
FY27-31 WC864 Ball Powder
Solicitation # W15QKN26RA085
The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.
W6QK Acc-Ri-Picatinny

POSTED

8 days ago

DEADLINE

in 1 day
View Details
NAICS: 325920
Federal
1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES
Solicitation # N0010426RK022
Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.
Navsup Weapon Systems Support Mech

POSTED

8 days ago

DEADLINE

in 25 days
View Details
NAICS: 325920
Federal
Squibs for Fire Sprinkler Valves
Solicitation # N00174-27-SIMACQ-102-0051
The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.
Nswc Indian Head Division

POSTED

9 days ago

DEADLINE

in 5 days
View Details
NAICS: 325920
Federal
EDRM - Enhanced Drogue Rocket Motor
Solicitation # FA8213-26-R-3036
Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.
FA8213 Aflcmc Ebhk

POSTED

9 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
VALVE STEM, TTV
Solicitation # N0010424QBM87
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
New
Federal
66--TRANSDUCER,MOTIONAL
Solicitation # N0010427QYA52

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
VALVE,GLOBE
Solicitation # N0010426QFE70
This fixed-price solicitation from NAVSUP Weapon Systems Support Mechanicsburg is for the procurement of a Globe Valve (NSN 4820-01-211-8826) designated as a Critical Safety Item and Special Emphasis Material Level I. Due to the high risk associated with failure in crucial shipboard systems, the contract mandates strict quality assurance, comprehensive material traceability, and adherence to TDP Version 013. The scope includes the delivery of the valve to the Portsmouth Naval Shipyard within 365 days, with a requirement for a Certificate of Compliance and detailed test certifications submitted via Wide Area Workflow for review and acceptance prior to shipment. Technical requirements specify the use of ASTM-A276 or ASTM-A479 UNS S31600 material for key components, including the body, bonnet, union nut, and stem assembly. The contractor must maintain a quality system compliant with ISO-9001 and follow rigorous inspection standards for threads, pressure tests, and non-destructive testing. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Additionally, the contractor must comply with strict cybersecurity reporting under clause 252.204-7012 and follow MIL-STD-2073 and MIL-STD-129 for packaging and marking.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
Federal
31--BEARING,BALL,ANNULA
Solicitation # N0010426QYAHD
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
POWER SUPPLY
Solicitation # N0010427QYA53
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
59--CONNECTOR,ELECTRIC
Solicitation # N0010426RFE40
Solicitation N00104-26-R-FE40, issued by NAVSUP Weapon Systems Support, is for the procurement of electric connectors (NSN 1HM 5935-01-542-5968). These components are designated as Critical Safety Items (CSI) and Special Emphasis material because their failure could result in serious personnel injury, loss of life, or the loss of a ship. Due to this criticality, the contract mandates rigorous quality controls, including a requirement for the contractor to maintain a quality system compliant with ISO-9001 or MIL-I-45208. The contract requires extensive testing and certification. Both contractor-led and government-led destructive First Article Testing (FAT) are mandatory, with government testing conducted at the Portsmouth Naval Shipyard. Key technical requirements include the use of QQ-N-286 material for specific penetrator and receptacle components, strict adherence to MIL-DTL-24231, and the prohibition of molybdenum disulfide thread lubricants. Comprehensive certifications are required for production tests, dye penetrant inspection, liquid penetrant inspection, and ultrasonic inspection of starting materials. Award will be made to a single technically acceptable offeror based on the most advantageous combination of price and past performance, with past performance weighted as more important than price. All deliverables must be processed through the Wide Area Workflow (WAWF) system, and a detailed Certificate of Compliance is required to ensure full traceability and adherence to all invoked specifications and drawings. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129 standards.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QTA53
This contract solicits repair services for a specific circuit card assembly, identified by Cage Code 23905 and reference number 949A9131-101. It requires the contractor to perform repairs in accordance with detailed technical specifications, including adherence to original manufacturer manuals, standards, drawings, and applicable quality requirements. The contractor must ensure all repaired items meet functional and operational standards, complete inspection and testing procedures, and properly mark the items per MIL-STD-130 guidelines. The government mandates a Repair Turnaround Time (RTAT) of 197 days, measured from the physical receipt of the asset to final government acceptance, and requires source inspection. Failure to meet RTAT deadlines may result in negotiated price reductions, while excusable delays will not incur penalties. The contract is structured as a firm-fixed-price arrangement with options for increased quantities at the same unit price. Freight terms specify FOB Origin with shipment handled by the Navy via the Commercial Asset Visibility system. Documentation and certifications must be maintained and accessible, and changes to design or parts require prior government approval, except for designated part number changes under a specified code. The solicitation includes requirements for contractor representations and certifications and references cybersecurity maturity model certification obligations effective November 2025. Offers must include pricing, RTAT, and capacity information, and only authorized distributors for the original manufacturer’s items will be considered for award. The Department of Defense office overseeing this contract is located in Mechanicsburg, PA, with contact available for clarification until the response deadline.
Bare Printed Circuit Board Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
New
Federal
48--VALVE,LINEAR,DIRECT
Solicitation # N0010427RFA12

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333998
New
Federal
53--HOIST STRAP
Solicitation # N0010426QAB90
Solicitation N0010426QAB90 is a total small business set-aside, fixed-price request for quotations issued by NAVSUP Weapon Systems Support Mech for the manufacture of three Hoist Strap Assemblies (P/N: 5641754-303, NIIN: LWM046472). The contractor must ensure all materials are assembled in strict adherence to Drawing 5641754 Rev E and comply with MIL-STD-130 for marking and MIL-STD-973 for configuration control. Delivery is required within 90 days on an FOB Destination basis. Award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with the government utilizing SPRS risk assessments to evaluate item, price, and supplier performance risks. The contract mandates Government Source Inspection per FAR 52.246-2, with inspection and acceptance occurring at the origin. Contractors are required to maintain all inspection records for the duration of the performance period and for 365 calendar days following final delivery. Packaging must comply with MIL-STD-2073-1 and MIL-STD-129, with specific packing levels based on the shipment destination. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. All hazardous material submissions must include GHS-compliant labels and Safety Data Sheets sent to NAVSUP WSS Code N242.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
New
Federal
59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0010427QUA36

POSTED

about 2 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334290
New
Federal
CONTROL MODULE
Solicitation # N0010426QSD42
This solicitation, issued by the Navsup Weapon Systems Support Mech, is for the repair of a Control Module. The government is seeking a Repair Turnaround Time of 165 days, measured from the physical receipt of the asset to the date of final government acceptance. The contract requires Government Source Inspection and mandates that all freight be handled by the Navy per the Commercial Asset Visibility Statement of Work. The award will be issued bilaterally and may include an option for increased quantity. Contractors must provide a quote including the unit price, total price, and confirmed turnaround time, along with a new unit price and lead time for comparison. All repair work must adhere to original manufacturer specifications and drawings, with physical identification following MIL-STD-130 and packaging meeting MIL-STD 2073. Only authorized distributors of the original manufacturer will be considered for the award.
Other Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334513
New
Federal
GAGE,PRESSURE,DIAL
Solicitation # N0010426QYADQ
This contract is a solicitation issued by the Navsup Weapon Systems Support Mech for the manufacture and procurement of dial pressure gages. The acquisition falls under NAICS code 334513 with a small business size standard of 750. Key requirements include strict adherence to design specifications represented by specific cage codes, physical identification according to MIL-STD-130, and packaging in accordance with MIL-STD 2073. The contract is a total small business set-aside and requires the use of Wide Area Workflow for payment instructions. The contractor is responsible for all inspection and quality assurance, with the government reserving the right to perform independent inspections to ensure compliance. A warranty for supplies of a noncomplex nature is required for one year after the date of delivery. Any changes in design, material, or part numbers must be approved by the NAVICP-MECH Contracting Officer via a written change order, unless it is a simple part number change. Award consideration is limited to authorized distributors of the original manufacturer, who must provide proof of authorization on company letterhead.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

in about 7 hours
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 325920
Closed
Federal
1377-01-063-3162 MD65, -3165 MD66, 1377-01-364-7322 MT95, 1377-00-103-3434 M190
Solicitation # N0010425RK041
Navsup Weapon Systems Support Mech

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Awarded
Federal
1377 - 01-394-1271, 1377-01-394-1272
Solicitation # N0010424RK077
Navsup Weapon Systems Support Mech

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
1355-01-387-7738 T107 Suspension Band Set MK89 MOD1
Solicitation # N0010425RK010
Navsup Weapon Systems Support Mech

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
TECHNOLOGY/BUSINESS OPPORTUNITY Method of direct polymerization and crosslinking of energetic materials to improve mechanical properties and performance
Solicitation # IL-13814
ENERGY, DEPARTMENT OF

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Awarded
Federal
Remanufacture of B1 & F15 Parts
Solicitation # FA8213-25-R-3025
FA8213 Aflcmc Ebhk

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
White Phosphorous - Pine Bluff Arsenal
Solicitation # W519TC-25-Q-A017
W6QK Acc-Ri

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Awarded
Federal
C17 FMS Arm Fire Initiators
Solicitation # FA8213-25-R-3028
FA8213 Aflcmc Ebhk

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
1377-01-255-1650 MT32 MD98
Solicitation # N0010425RK056
Navsup Weapon Systems Support Mech

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Awarded
Federal
FMS F-15 Fire Cartridge - Solicitation
Solicitation # FA8213-25-Q-3000
FA8213 Aflcmc Ebhk

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
Harness Release Carts and Gyro Spin-Up Gas GENERATORS FOR USAF
Solicitation # FA8213-24-R-3023
FA8213 Aflcmc Ebhk

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
BBU-35A/B & BBU-36A/B Impulse Cartridges
Solicitation # FA8213-BBU-35and36-SSS
FA8213 Aflcmc Ebhk

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details
NAICS: 325920
Closed
Federal
NOTICE OF INTENT TO SOLE SOURCE MATSYS INCORPORATED
Solicitation # N0024425Q00XXX
Navsup

POSTED

about 1 year ago

CLOSED

about 1 year ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS