Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

1377 - JN25 Power Module

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of Power Modules under contract N0010424CK018 for the Department of Defense, specifically the Navsup Weapon Systems Support Mech. The current contract is held by EaglePicher Technologies LLC with a value of 4,282,400 dollars and is expected to end on November 30, 2026. The upcoming procurement is classified as a high-confidence full recompete and will be conducted as a firm fixed price contract through full and open competition after the exclusion of certain sources. The scope of work covers specific National Stock Numbers associated with explosive power modules, requiring a safety survey due to the nature of the items. Access to the opportunity is restricted to Chemring, UPCO, and EaglePicher, and interested parties should note that paper copies and CD drawings are not provided. The project falls under NAICS code 325920 and is managed by the office located in Mechanicsburg, Pennsylvania.

General Info

DoD recompete for explosive power modules, firm fixed price, open competition, value $4.28M.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

325920 - Explosives Manufacturing

Place of Performance

PA, 648012816, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 30

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

Ashley Leonard

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: N0010424CK018 Incumbent: EAGLEPICHER TECHNOLOGIES LLC Contract Value: $4,282,400 Potential End Date: 2026-11-30T00:00:00.000Z Competition: FULL AND OPEN COMPETITION AFTER EXCLUSION OF SOURCES Pricing: FIRM FIXED PRICE Classification: full-recompete (Confidence: high - 90/100)
DODIC: JN25 NSNs: 1377-01-616-5059; 1377-01-625-4503; 1377-01-524-2412 NOMEN: Power Module Paper copies will not be provided. Restricted to Chemring, UPCO, and EaglePicher. Drawings are NOT available on CD. Item is explosive. A Safety Survey will be required. See solicitation for explosive weight and class.

Similar Contracts

Same NAICS industry code

MJU-76/B Flare, Countermeasure

Solicitation # FA821326RB005-Solicitation

The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.

FA8213 Aflcmc Ebhk

POSTED

about 19 hours ago

DEADLINE

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

about 19 hours ago

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

FA8213 Aflcmc Ebhk

POSTED

about 19 hours ago

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 year

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

in about 1 month

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

FY27-31 WC864 Ball Powder

Solicitation # W15QKN26RA085

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

QPL-Qualified O-Ring SupplyThis subcontract involves the supply of high-performance O-rings for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The primary requirement is the procurement of O-rings exclusively from Qualified Products List manufacturers, with a mandatory certification of qualification according to MIL-PRF-25732E standards. The opportunity is categorized under NAICS code 326199 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

All Other Plastics Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Specialized Fastener Supply (Hex Cap Screws)This subcontract involves the procurement and delivery of military-grade Type I Hex Cap screws for prime contractors supporting Navsup Weapon Systems Support Mech projects. All supplied fasteners must be manufactured in strict accordance with MIL-DTL-1222 specifications to meet Department of Defense requirements. The opportunity is categorized under NAICS code 332722 and was posted on October 28, 2026. Interested parties must submit their responses by the deadline of November 27, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 19 hours ago

DEADLINE

Nickel-Aluminum-Bronze Material SupplyThis subcontract involves the supply of raw Nickel-Aluminum-Bronze material to prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The supplier is responsible for delivering raw stock that strictly adheres to ASTM B150/B150M chemical and physical property standards. A critical requirement of the contract is the provision of certified mill certifications to verify the material composition and origin, with a specific mandate that all supplied material must be certified mercury-free. The opportunity is categorized under NAICS code 423510, with a response deadline set for November 27, 2026.

Metal Service Centers and Other Metal Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Gland Actuator Fabrication and AssemblyThis subcontract involves the precision machining and assembly of three Gland Actuators for Navy submarine projects under the Navsup Weapon Systems Support Mech. The scope of work includes machining components according to technical drawings, executing First Article Testing and Inspection, and performing NDT liquid penetrant inspection within a mercury-free environment. To be eligible, contractors must hold ISO 9001 or MIL-I-45208 certification and ensure full compliance with MIL-STD-130 and MIL-STD-973 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 27, 2026, falling under NAICS code 332710 for the Department of Defense.

POSTED

about 19 hours ago

DEADLINE

Precision Bearing Supply for Valve AssemblyThis subcontract involves the supply of high-precision ball or roller bearings for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg valve restoration projects. The provider must deliver certified bearings that meet the exact technical specifications for NIIN 015505005, ensuring all components are suitable for valve assembly under NAICS code 332510. A critical requirement of the agreement is strict adherence to the Buy American and Trade Agreements Act, necessitating that all delivered products originate from qualifying countries. The contract was posted on October 28, 2026, with a response deadline of November 2, 2026, for the Department of Defense.

Hardware Manufacturing

POSTED

about 19 hours ago

DEADLINE

Valve Assembly Repair and OverhaulThis subcontract involves the technical repair and restoration of a Valve Assembly (NIIN: 015505005) to support prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes the disassembly, inspection, and refurbishment of internal components to ensure they meet original specifications. To guarantee functional compliance, the contractor must perform pressure testing and apply IUID data matrix marking in accordance with DFARS 252.211-7003. The final deliverable is one fully repaired and certified Valve Assembly with completed IUID registration. This project falls under NAICS code 811210 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 19 hours ago

DEADLINE

Ultrasonic and Dye Penetrant Inspection ServicesThis subcontract for Ultrasonic and Dye Penetrant Inspection Services involves providing non-destructive testing for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work includes performing ultrasonic inspections on starting materials and dye penetrant surface inspections on finished Union and Tailpiece components. All testing must be conducted using approved UT equipment and PT kits in strict accordance with EB Specification 2937 and NAVSEA T9074-AS-GIB-010-271. The contractor is responsible for delivering all required testing certifications and Certification Data CDRLs utilizing DD Form 1423. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense. Interested parties should note the response deadline of November 9, 2026.

Testing Laboratories and Services

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Tailpiece, Union (NSN 4730-01-651-0817)This subcontract involves the manufacture of 35 Tailpiece, Union units (NSN 4730-01-651-0817) for prime contractors supporting NAVSUP Weapon Systems Support projects. The scope of work requires precision machining and fabrication utilizing CNC equipment in strict accordance with Technical Data Package Version 002. The project is governed by NAICS code 332710 and falls under the jurisdiction of the Department of Defense. Critical compliance requirements include adherence to Special Emphasis Level I quality control, the Buy American Act, and DPAS DO ratings. All finished units must be packaged and marked according to MIL-STD-2073 and MIL-STD-129 standards, respectively. Final delivery is designated as FOB Destination to Portsmouth NSY.

POSTED

about 19 hours ago

DEADLINE

Specialized Material Supply for Valve FabricationThis subcontract, titled Specialized Material Supply for Valve Fabrication, involves the procurement and delivery of raw metals and specialized alloys for prime contractors working on Department of the Navy valve fabrication projects. The supplier is responsible for sourcing materials that strictly adhere to design reference 21321-001 specifications and delivering these certified materials directly to the manufacturer. To ensure full compliance with government standards and DFARS 252.225-7036 Buy American Act requirements, the provider must supply all necessary Mill Test Reports and Material Safety Data Sheets. Managed under the Department of Defense via Navsup Weapon Systems Support Mech, the opportunity is categorized under NAICS code 332999, with a response deadline set for November 12, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 19 hours ago

DEADLINE

Manufacture of Linear Direct ValvesThis subcontract involves the manufacture of five Linear Direct Valves for prime contractors working on Department of the Navy projects. The scope of work includes the fabrication of valve bodies and internal components utilizing precision CNC machining to ensure strict adherence to design reference 21321-001 and Cage Code 78062 specifications. Additionally, the contractor is responsible for applying Item Unique Identification to all parent items and subassemblies. The project is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency. Compliance with DFARS 252.225-7036 Buy American standards is mandatory for the delivery of the units, which are identified by NIIN 014108012. The contract falls under NAICS code 332911.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Self-Locking Nuts (NASM 17828-6C)This subcontract with the Department of Defense, specifically for the Navsup Weapon Systems Support Mech, requires the procurement of 368 self-locking nuts. The contractor is responsible for manufacturing or sourcing components that strictly adhere to NSN 5310-01-540-9579 and Part Number NASM 17828-6C according to TDP Version 006. The agreement mandates strict quality and logistical standards, including permanent traceability markings per MIL-STD-792 and packaging compliant with MIL-STD-2073. Additionally, the provider must submit IUID reporting through WAWF and furnish certificates of compliance for all Special Emphasis Material.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 19 hours ago

DEADLINE

Custom Cable Assembly FabricationThis subcontract involves the custom fabrication of five cable assemblies for prime contractors supporting Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing the assemblies according to Sippican Drawing D248895-1 Rev F and DGO Drawing 1155130-114, which includes performing all necessary electrical and mechanical testing to ensure operational integrity. To qualify, the provider must maintain ISO 9001 certification and ensure full compliance with Buy American requirements. All deliverables must adhere to MIL-STD-129 P and MIL-STD-130 N marking standards. The opportunity is categorized under NAICS code 335999, with a response deadline set for November 2, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

13--CATAPULT,AIRCRAFT E

Solicitation # N0038325QT327

Navsup Weapon Systems Support

POSTED

over 1 year ago

CLOSED

over 1 year ago

1377 - 01-658-5348, DODIC: JN43, Detonating Cord Assembly (DCA/TLX), 7009200-01

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

1355 - 01-620-4752 CWRT DISPENSER ASSEMBLY, WIRE, MK8 MOD 3

Solicitation # N0010425RK007

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

1377 - 1377-01-307-9125, MT13, NACES cartridges

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

Propelling Charge Support - 60mm, 81mm, 120mm - Solicitation

Solicitation # W519TC-25-R-2008

POSTED

over 1 year ago

CLOSED

over 1 year ago

1377 - 01-312-3511 EY28

Solicitation # N0010424RK061

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Solicitation # FA821325R3027

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

CLOSED

over 1 year ago

F-16 ECRL Solicitation

Solicitation # FA821325R3006

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

CLOSED

over 1 year ago

W519TC-25-Q-POWD - Black Powder Class 3 and Class 6 - MIL-DTL-223D

Solicitation # W519TC-25-Q-POWD_SS

POSTED

over 1 year ago

CLOSED

over 1 year ago

Cartridge, Seat Initiator; P/N: MBEU200878

Solicitation # N0010425QK029

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Sources Sought - ARD-446 & ARD-863 Impulse Cartridges

Solicitation # FA8213-25-R-A100

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

CLOSED

over 1 year ago

Titan Disruptor

Solicitation # F2Z3C55114AW01

FA4621 22 Cons Pk

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS