Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

146063 - 146063 Haynes Generating Station - 7FA Gas Turbine Case Tooling

Active
231369State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The City of Los Angeles is soliciting bids for tooling required for the 7FA Gas Turbine Case at the Haynes Generating Station under solicitation number 231369. The bid closing date is August 20, 2026, at 5:00 PM, with responses due by midnight on August 21, 2026. Interested vendors must register on the City of Los Angeles’s official procurement portal to participate, and all inquiries regarding the bid’s content, requirements, or accuracy must be directed to the originating agency. The place of performance is specified as Los Angeles, CA 90012, and the contract is classified as a local government solicitation. The point of contact listed is Jaimesha Ferrell at jaimesha.ferrell@ladwp.com, though a contracting officer is also referenced with an email address associated with Biddingo.com, which is a third-party platform providing information only. Vendors should verify all details directly through the official City of Los Angeles procurement system, as Biddingo.com disclaims responsibility for the accuracy or content of external site data.

General Info

Los Angeles seeks tooling for 7FA Gas Turbine Case, bid due August 20, 2026, via official procurement portal.

Agency

California → City of Los AngelesView Agency

NAICS

333514 - Special Die and Tool, Die Set, Jig, and Fixture ManufacturingView NAICS

Place of Performance

Los Angeles, CA, CA 90012, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia → City of Los Angeles
Contacts1 person available
OfficeN/A
Organization / Agency
California → City of Los Angeles
View Agency Profile
Office AddressN/A
Contacts
Contracting Officer
contact@example.gov

Full Description

Show more
City of Los Angeles 146063 - 146063 Haynes Generating Station - 7FA Gas Turbine Case Tooling Tender # 231369 Closing Date : 08/20/2026 at 17:00 PM Contact: Name: JAIMESHA FERRELL Email jaimesha.ferrell@ladwp.com Details: Haynes Generating Station - 7FA Gas Turbine Case Tooling Disclaimer: This bid is researched and provided for information purposes only. To participate in this bid opportunity, interested vendors are sometimes required to register on the City of Los Angeles's website. Please refer to the originating organization for any information relating to this. Direct all queries pertaining to the language, the content or any missing or inaccurate information within this abstract to its originator, as indicated in the advertisement. Note: When you click on the link below, a new window will open to the site where you can locate more information regarding this bid. You may need to search the site to locate the bid. View Bid Information Biddingo.com is not responsible for the contents of the third party site and does not make any representations regarding the content or accuracy of materials on such third party web sites. If you decide to access them, you do so at your own risk.

Similar Contracts

Same NAICS industry code

NAICS: 333514
New
DIBBS
Dedicated Tooling Design and FabricationThe contract requires the design, development, and fabrication of specialized tooling to manufacture a valve component in strict accordance with technical drawing NR 19207 12422042, Revision D. The work is classified as a subcontract under the NAICS code 333514, which pertains to industrial machinery manufacturing, and is intended to support production for the Department of Defense’s LSO Combat Vehicles and Armament program. The tooling must be fully capable of producing the valve component to precise engineering specifications, ensuring consistency, quality, and durability under operational conditions. Performance of the contract is required at Fort Bragg, North Carolina, with a response deadline of August 21, 2026, and the solicitation was posted on August 10, 2026. The effort is not subject to any specific set-aside requirements, meaning any qualified vendor may submit a proposal. The procurement is managed through the DLA’s DIBBS platform, and all submissions must comply with the technical and procedural guidelines outlined in the referenced drawing and associated contract documentation. Successful bidders will be expected to deliver fully functional, inspected, and certified tooling ready for immediate use in production.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333514
New
DIBBS
Tooling and Fixture Development for ProductionThe contract requires the design, fabrication, and validation of specialized tooling and molds necessary for the casting and forming of a door handle, with a focus on enabling high-quality, repeatable production. This includes a one-time setup to prepare the manufacturing process for full-scale production, ensuring all tooling meets precise engineering and performance standards. The work is scoped to support a defense-related supply chain and must be completed under strict quality and timing constraints to align with production schedules. This is a Service-Disabled Veteran-Owned Small Business Set-Aside subcontract under NAICS code 333514, issued by the Department of Defense through LAND SUPPLY CHAIN. The performance location is in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on August 9, 2026, and responses are due by August 20, 2026. Only eligible SDVOSB firms may submit proposals, and the contract expects full compliance with defense manufacturing requirements, including precision, durability, and supply chain traceability for critical automotive components used in defense applications.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333514
New
DIBBS
Tooling Design and FabricationThe contract calls for the design and fabrication of specialized molds and dies essential for the bronze elbow casting process, demanding high-precision CNC machining to meet exacting standards of dimensional accuracy and surface finish. These tooling components must be engineered for durability and repeated use across a production run of 758 units, ensuring consistent quality and minimal wear throughout the manufacturing cycle. The work requires advanced metallurgical knowledge and robust machining capabilities to withstand the thermal and mechanical stresses inherent in bronze casting operations. This is a Small Business Set-Aside procurement under the NAICS code 333514, restricted to small business concerns as defined by the SBA, and is administered by the Fluid Handling Division of the Department of Defense. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026, and the work is to be performed at a designated production site in New Cumberland, Pennsylvania, with zip code 17070-5002. The contract type is classified as a subcontract, and interested parties can access additional details through the official DIBBS portal using the provided solicitation link.
FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333514
New
DIBBS
Tooling Design and Fabrication for Casting MoldsThe contract is for the design and fabrication of specialized tooling required to cast socket-type copper tees, encompassing the development of molds and patterns essential for establishing a stable production setup. This effort is critical to enabling consistent, high-precision manufacturing of copper fittings used in specialized applications, with all tooling must meet exacting technical specifications to ensure dimensional accuracy and material integrity. The work is classified as a subcontract under a Total Small Business Set-Aside, restricted exclusively to small business concerns as defined by the SBA, with the NAICS code 333514 indicating the scope falls under forging and stamping machinery manufacturing. The solicitation was posted on August 7, 2026, with a response deadline of August 14, 2026, and the place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the Nuclear Reactor Program under the Department of Defense, indicating that the finished components will support defense-related nuclear or high-reliability systems. The procurement is managed through the DIBBS system, and while no point of contact is listed, all submissions must adhere strictly to the requirements outlined in the solicitation to qualify for award.
NUCLEAR REACTOR PROGRAM

POSTED

4 days ago

DEADLINE

in 3 days
View Details
NAICS: 333514
New
DIBBS
Specialized Tooling Design and FabricationThe contract entails the design, fabrication, and ongoing maintenance of specialized tooling required to achieve precise dimensional accuracy and consistent repeatability in the production of pipe elbows through casting processes. This work is critical to ensuring quality and performance standards in components used within defense-related fluid handling systems. The project is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, in accordance with SBA guidelines under NAICS code 333514, which classifies the work within the manufacturing of industrial machinery. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, zip code 17070-5002. The contracting activity falls under the Fluid Handling Division of the Department of Defense, indicating the tooling will directly support defense infrastructure and operations requiring high-reliability piping components.
FLUID HANDLING DIVISION

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
New
DIBBS
Specialized Tooling and Fixture DevelopmentThe contract titled Specialized Tooling and Fixture Development requires the design, fabrication, and validation of custom tooling molds and fixtures specifically for the metal casting production of a trolley component. This subcontract is set aside for HUBZone certified businesses under the NAICS code 333514 which pertains to forging and stamping manufacturing. All work must be performed at the specified place of performance in San Diego with a zip code of 92136-3581 and is funded by the Department of Defense under the agency designation Construction Equipment Manu & Con. The solicitation was posted on August 5 2026 and responses are due by August 17 2026 with delivery expected to meet stringent quality and validation standards for production readiness. The contract underscores the need for precise engineering execution to support defense-related casting operations with full lifecycle validation of all developed tooling.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
New
DIBBS
Tooling Design and Production for Casting
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
New
DIBBS
Specialized Tooling and Casting SupportThis contract seeks specialized tooling, mold design, and casting engineering support for the low-volume, high-precision manufacturing of military components, requiring advanced technical expertise to meet stringent defense standards. The work is designated as a Women-Owned Small Business Set-Aside under NAICS code 333514, limiting eligibility to certified WOSB firms and emphasizing diversity in defense supply chain participation. Performance is required at a facility in Tracy, California, with a ZIP code of 95304-5000, and all submissions must be received by August 17, 2026, with the solicitation posted on August 5, 2026. The contract is structured as a subcontract under the Department of Defense, managed by DLA Dist San Joaquin, and is accessible through the official DIBBS platform for interested bidders.
DLA DIST SAN JOAQUIN

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
New
DIBBS
PUNCH
Solicitation # SPE8E5-26-T-3797
This contract, issued under solicitation SPE8E5-26-T-3797 by the Department of Defense through the DLA Distribution New Cumberland Facility, requires the supply of 32 units of item NSN 3456011373124, with a unit price of $32.00, totaling $1,024. Delivery must be made FOB origin within 167 days from the contract award, with no variance allowed in quantity. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s standard packaging requirements, including use of the specified packaging method, containment materials, and palletization standards. Mercury and mercury-containing compounds are prohibited unless part of exempted functional components such as batteries, fluorescent lamps, sensors, or weapons systems, and where applicable, portable devices must include a secondary containment. The delivery address is designated as the DLA Distribution New Cumberland Facility in Pennsylvania, and transportation instructions follow DLA procedural notes C19 and C20. The contract incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions. The item is classified under NAICS 333514 and is not subject to any set-aside provisions. Technical data is not available as part of the bid package. The required delivery date was originally set for November 1, 2026, but has been adjusted to February 1, 2027, reflecting a revised schedule. All supplies must be free from government identification upon non-acceptance. Point of contact for inquiries is Khue Nguyen, with primary communication via email and phone. The contract was posted on August 5, 2026, with responses due by August 17, 2026. The unit of issue is EA, consistent with DoD standards, and pricing is fixed with no provision for adjustment.
DDSP NEW CUMBERLAND FACILITY

POSTED

6 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
Federal
The Drive Plate Bushing Gage - H-1 United States Marine Corps (USMC) Helicopter Program
Solicitation # N68335-26-Q-1139
The U.S. Navy’s Naval Air Warfare Center, Aircraft Division, based at Joint Base MDL in New Jersey, is preparing to issue a Firm Fixed Price contract for the Drive Plate Bushing Gage, Part Number 18D13071-1, to support the United States Marine Corps’ Domestic H-1 Helicopter Program. This procurement will be conducted as a Total Small Business Set-Aside under the SBA and NAICS code 333514, ensuring eligibility is restricted to small businesses as defined by the Small Business Administration. The solicitation number is N68335-26-Q-1139, with documents available exclusively through the SAM.gov website; no requests via phone or mail will be honored. The presolicitation was posted on June 10, 2026, and responses must be submitted by June 25, 2026, at 5:00 PM Eastern Time. Vendors are required to monitor the SAM website periodically for any amendments to the solicitation, as updates will only be posted there. The government has explicitly stated this document is not a request for proposal and does not obligate it to pay for any information received from potential vendors. It serves solely as an administrative notice to indicate possible future procurement activity and should not be interpreted as a commitment to award a contract. The contract, if awarded, will be performed at Lakehurst, New Jersey, and inquiries should be directed to Chris Brake at christopher.d.brake5.civ@us.navy.mil. All participation is voluntary, and the Government reserves the right to modify, delay, or cancel the procurement at any time without liability or obligation.
Navair Warfare Ctr Aircraft Division

POSTED

11 days ago

DEADLINE

in 20 days
View Details
NAICS: 333514
Federal
Procurement of Semiconductor Probe SystemsThe contract requires the procurement of two specialized semiconductor testing probe systems, specifically the SA-12 D5P and P54L SA D5P models, or functionally equivalent alternatives, with all equipment to be newly manufactured, fully operational, and in strict compliance with technical specifications. The systems must be delivered as complete, ready-to-use units capable of meeting the performance standards expected in high-precision semiconductor testing environments. This is a subcontract under the Department of State, managed by the American Embassy Bogota - Nas, with the North American Industry Classification System code 333514 indicating its alignment with the manufacturing of industrial machinery. The solicitation was posted on July 24, 2026, and responses are due by August 17, 2026, at 9:00 PM, with no set-aside provisions specified, allowing participation from any qualified vendor regardless of size or status. The place of performance and exact delivery location are not detailed, and no point of contact is listed in the provided data.
American Embassy Bogota - Nas

POSTED

18 days ago

DEADLINE

in 6 days
View Details
NAICS: 333514
Federal
INL_RFQ-PR16111851 DIGITAL EXTRACTION EQUIPMENT
Solicitation # INL_RFQ-PR16111851
The U.S. Department of State, through the International Narcotics and Law Enforcement Affairs Office in Bogota, is seeking quotations for digital extraction equipment to support operations in Colombia. Interested vendors must submit responses in accordance with the combined synopsis/solicitation document INL_RFQ-PR16111851, which serves as the sole solicitation and does not require a separate written request. Submissions must be sent via email to AlejoA@state.gov and BogotaINLSolicitation@state.gov no later than August 17, 2026, at 4:00 p.m. Eastern Time, with no exceptions permitted for late submissions. Proposals must comply fully with the requirements outlined in Section 3 of the RFQ document to be considered for award. The procurement is classified under NAICS code 333514 and is being managed by the American Embassy Bogota – Nas, with the primary point of contact being Andres Alejo Salguero. The contract will be awarded based on the evaluation of timely and complete responses that meet all technical and procedural specifications as detailed in the solicitation.
American Embassy Bogota - Nas

POSTED

18 days ago

DEADLINE

in 6 days
View Details

More opportunities from California → City of Los Angeles

Same awarding agency

NAICS: 611430
New
SLED
0444-2026-05-RFPQ - RFQ: ARFF Training Services (Personal Services)
Solicitation # 231328
The City of Los Angeles is seeking qualified vendors to provide Aircraft Rescue and Firefighting ARFF Training Services under RFQ 0444-2026-05-RFPQ with solicitation number 231328. This procurement is for personal services aimed at delivering specialized training to personnel responsible for aircraft rescue and firefighting operations, with performance required in Los Angeles CA 90012. Bids must be submitted no later than September 25 2026 at 2:00 AM Pacific Time and are open to vendors registered with the City’s procurement system. The solicitation is managed by the Los Angeles World Airports LAWA division and all inquiries should be directed to sourcinglawaorg. Vendors interested in participating are required to review the full solicitation details through the official City of Los Angeles procurement portal as this notice is for informational purposes only and does not constitute an official bid document. The contracting officer for this opportunity is listed as Eszeler and the bidding platform is accessed via a thirdparty link on Biddingo.com which disclaims responsibility for the accuracy or completeness of external site content. There is no specified setaside classification and no NAICS code provided in the data. All proposals must meet the City’s requirements for personal services training and comply with any additional qualifications or standards outlined in the official sourcing materials.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238310
New
SLED
146524 INSULATOR, OUTDOOR APPARATUS
Solicitation # 231348
The City of Los Angeles is soliciting bids for INSULATOR, OUTDOOR APPARATUS under Tender #231348, with a submission deadline of August 17, 2026 at 5:00 PM. The contract is managed by the Los Angeles Department of Water and Power, and all inquiries should be directed to Nizar Faruk at nizar.faruk@ladwp.com. Vendors interested in participating must register on the City of Los Angeles’s official procurement portal, as participation is contingent upon proper registration. The place of performance is specified as Los Angeles, California, with a postal code of 90012. Although the solicitation was posted on August 10, 2026, bidding information must be verified directly through the linked third-party site, as Biddingo.com provides only reference material and assumes no responsibility for the accuracy or completeness of external content. The contract does not specify a set-aside type or NAICS code, and bidders are advised to consult the originating agency for full terms, specifications, and compliance requirements.
Drywall and Insulation Contractors

POSTED

1 day ago

DEADLINE

in 7 days
View Details
New
SLED
RFB-IS-27200085 HID ACCESS CONTROL CARDS (BRAND ONLY)
Solicitation # 231356
The City of Los Angeles is soliciting bids for HID access control cards, strictly requiring brand-specific products, under solicitation number 231356. The bid opportunity, posted on August 10, 2026, has a deadline for submission of August 14, 2026, at 3:00 PM Pacific Time, with responses due by 10:00 PM Pacific Time for system processing. All cards must be genuine HID brand products, and vendors are expected to comply fully with the specified branding requirements without substitutions. The place of performance is designated as Los Angeles, CA 90012, and the contracting officer for inquiries is listed as Eszeler, though primary correspondence should be directed to Norma E. Rodriguez at nrodriguez3@isd.lacounty.gov. Vendors must register on the City of Los Angeles procurement portal to participate, and while Biddingo.com provides the listing for informational purposes, it bears no responsibility for the accuracy or availability of details on third-party sites. All questions regarding the solicitation's wording, requirements, or inaccuracies must be addressed directly to the originating agency.

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 237110
New
SLED
SZC13938 - CENTRAL BUSINESS DISTRICT (CBD) SEWER REHABILITATION UNIT 15 – JAMES M. WOOD BOULEVARD TO 11TH STREET
Solicitation # 231182
The City of Los Angeles is soliciting bids for the rehabilitation of a sewer system unit within the Central Business District, specifically along James M. Wood Boulevard to 11th Street, under contract number SZC13938 and solicitation number 231182. The project involves the repair and upgrade of existing sewer infrastructure in a high-traffic urban area, with work expected to take place in the 90012 zip code area of Los Angeles. The bid submission deadline is set for September 9, 2026, at 3:00 PM, with the solicitation posted on August 10, 2026, and interested vendors must register on the City’s official portal to participate. All inquiries should be directed to Matias Farfan at mat.farfan@lacity.org, as the provided contact information may not reflect the official point of contact for the contract. The work will require compliance with municipal standards and coordination with city operations, and bidders are advised to consult the City’s website for full specifications, as this summary does not include technical requirements or submission formats. Biddingo.com provides this listing for informational purposes only and is not responsible for the accuracy or completeness of third-party content.
Water and Sewer Line and Related Structures Construction

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 423610
New
SLED
136226 - 136226 Kit, Splice, Termination, Transition, and Elbow Adapter
Solicitation # 231373
The City of Los Angeles is soliciting bids for a comprehensive procurement of kits, splices, terminations, transitions, and elbow adapters under solicitation number 231373, with a response deadline of August 26, 2026. This tender is intended to supply specialized components used in infrastructure and utility systems, likely for electrical, telecommunications, or similar municipal applications. The place of performance is listed as Los Angeles, California, with the contract managed by the City of Los Angeles through its Department of Water and Power, and all deliveries and compliance must meet the specifications outlined in the official bid documents. Interested vendors must register on the City of Los Angeles’s official procurement portal to participate, as third-party platforms like Biddingo.com are provided only for informational purposes and do not facilitate actual bidding. All inquiries regarding bid content, requirements, or discrepancies must be directed to the official point of contact, Jaimesha Ferrell at jaimesha.ferrell@ladwp.com. The solicitation does not specify a set-aside type or NAICS code, and vendors are advised to review the official posting directly through the provided link to ensure full compliance with submission guidelines, technical specifications, and contractual obligations. Failure to adhere to the registration and submission procedures may result in disqualification.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 541612
New
SLED
0496-2026-07-RFPQ-231342 - RFQ - Workplace Culture, Training & Safety Professional Services (Personal Services)
Solicitation # 231342
The City of Los Angeles is soliciting professional services through RFQ 231342 to enhance workplace culture, training, and safety initiatives under a personal services contract. The opportunity is open to qualified vendors who can deliver expert services focused on fostering positive work environments, implementing effective training programs, and ensuring compliance with safety standards across municipal operations. Bids must be submitted by October 9, 2026, at 5:00 PM Pacific Time through the City’s Vendor Self Service Website, and interested parties are required to register and access the opportunity directly on the official portal to review full requirements and submit proposals. The place of performance is specified as Los Angeles, CA 90012, and all services are expected to align with the City’s goals for employee well-being and operational safety. All communications and inquiries regarding the solicitation should be directed to sourcing@lawa.org, the designated LAWA Buyer, as the provided contact details for a Contracting Officer on Biddingo.com are for informational purposes only and not official points of contact. Vendors must verify all bid instructions, eligibility criteria, and submission procedures directly on the City’s portal, as third-party sites like Biddingo.com offer summary information only and assume no responsibility for accuracy or completeness of the posting. Participation requires adherence to the City’s procurement protocols, and failure to follow official submission guidelines may result in disqualification. There is no set-aside designation indicated, so all eligible vendors may respond, provided they meet the general qualifications for personal services contracts with the City of Los Angeles.
Human Resources Consulting Services

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
New
SLED
RFB-IS-27200079 - **BRAND SPECIFIC** - NEW APPARATUS -DROOP ADAPTERS TYPE 1 EN
Solicitation # 231355
The City of Los Angeles is soliciting proposals for brand-specific new apparatus droop adapters type 1 en under solicitation number 231355, with a deadline for responses on August 14, 2026, at 3:00 PM. The requirement is strictly for a specific brand of equipment, and vendors must ensure full compliance with the designated technical specifications. This solicitation is intended for local procurement and the place of performance is within Los Angeles, CA 90012. Interested parties are required to register on the City of Los Angeles’s official procurement portal to participate, and all inquiries regarding terms, content, or inaccuracies must be directed to the originating agency. The contracting officer may be contacted via the provided email, though bids must be submitted in accordance with the official procedure outlined by the city, and any external links provided for additional information are not endorsed or verified by third-party platforms.

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 314910
New
SLED
134089R1 BAG AND TARP, CANVAS
Solicitation # 231360
The City of Los Angeles is seeking bids for the procurement of bags, tarps, and canvas materials under solicitation number 231360, with the contract designation 134089R1. The deadline for submitting responses is August 20, 2026, at 5:00 PM, and the solicitation was posted on August 10, 2026. All bids must be submitted through the City’s Vendor Self Service Website, where vendors are required to register or use public access to view detailed specifications and complete the bidding process. The place of performance is specified as Los Angeles, California, with a zip code of 90012. Interested parties should direct all questions regarding the bid content, language, or accuracy to the originating agency, as Biddingo.com provides only informational support and disclaims responsibility for third-party site content. The point of contact listed is the Contracting Officer, reachable via the email provided, and participants are advised to verify all requirements directly through the official procurement portal.
Textile Bag and Canvas Mills

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 424690
New
SLED
270000900025,RFQ,82,1 - HYDROCHLORIC ACID, HCI
Solicitation # 231368
The City of Los Angeles is soliciting bids for the supply of hydrochloric acid, HCI, under solicitation number 231368, with a closing date of August 13, 2026, at 7:00 AM Pacific Time. The contract is identified under reference 270000900025, RFQ, 82, 1, and is intended for local procurement with performance specified at Los Angeles, CA 90012. Interested vendors must ensure they are registered on the City of Los Angeles’s official procurement portal to participate, as registration is a prerequisite for submission. All inquiries regarding the bid’s language, content, or potential inaccuracies should be directed to the originating agency, not to third-party platforms. The point of contact listed is an email address associated with Biddingo.com, but official communication should be routed through the City’s designated procurement channels. The posting is provided for informational purposes only, and vendors are advised to verify requirements directly on the City’s website to ensure full compliance with solicitation terms and conditions.
Other Chemical and Allied Products Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 541380
New
SLED
Total Dissolved Solids and Chloride Study (S-069)
Solicitation # 231276
The City of Los Angeles is soliciting proposals for the Total Dissolved Solids and Chloride Study (S-069), identified by solicitation number 231276, with a response deadline of October 1, 2026. This effort aims to investigate the levels and sources of total dissolved solids and chloride in the city’s water systems, likely to support regulatory compliance, infrastructure planning, or environmental management initiatives. Interested vendors must ensure they are registered on the City of Los Angeles’s official procurement platform to participate, as participation requires adherence to the agency's specific registration and submission protocols. All inquiries regarding the bid’s content, requirements, or corrections should be directed to the originating organization, as the provided details are for informational purposes only and may not reflect the latest official documentation. The contract is managed by the City of Los Angeles under its local government authority, with performance expected to occur in Los Angeles, CA, specifically at the zip code 90012. The point of contact listed as the Contracting Officer is eszeler@biddingo.com, though bidders are advised to verify direct agency contacts through the official portal, as third-party platforms like Biddingo are not responsible for the accuracy or completeness of the information hosted there. The solicitation was posted on August 10, 2026, and vendors must navigate to the linked external site to access detailed bid documents, understand submission requirements, and ensure full compliance before the October 1, 2026 deadline. There is no specified set-aside classification or NAICS code provided, indicating that all eligible contractors may apply without restricted participation categories.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in about 2 months
View Details
NAICS: 237990
New
SLED
RFB-IS-27200087 - 2368 APOLLO PARK IRRIGATION DEP WELL PUMP
Solicitation # 231357
The City of Los Angeles is soliciting bids for the replacement of a well pump at the 2368 Apollo Park Irrigation Department site, identified under solicitation number 231357 and RFB-IS-27200087. The bid submission deadline is August 14, 2026, at 3:00 PM Pacific Time, with the request publicly posted on the City’s Vendor Self Service Website where vendors must either log in or use public access to view requirements and submit proposals. The work is to be performed at the Apollo Park location in Los Angeles, CA, with a zip code of 90012, and vendors are expected to comply with all technical and procedural guidelines provided through the official city portal. Interested parties should note that registration on the City’s vendor system may be required to participate, and all inquiries regarding contract language, specifications, or discrepancies must be directed to the issuing agency. The contracting officer for this opportunity is listed with the email eszeler@biddingo.com, though vendors are advised to verify all details directly through the City of Los Angeles systems, as third-party platforms like Biddingo.com provide only informational links and disclaim responsibility for content accuracy or site functionality. The notice emphasizes that bidders must independently navigate the official city portal to access complete documentation, and no guarantees are provided regarding the completeness or timeliness of external data. Bidders are encouraged to act promptly to ensure compliance with registration requirements and submission procedures ahead of the deadline.
Other Heavy and Civil Engineering Construction

POSTED

1 day ago

DEADLINE

in 3 days
View Details
NAICS: 335931
New
SLED
146357 CLASS B COPPER 5KV CABLE / U1 + 2
Solicitation # 231361
The City of Los Angeles is seeking bids for Class B Copper 5KV Cable with U1 + 2 configuration under solicitation number 231361, with a response deadline of August 26, 2026 at 5:00 PM. The contract is managed by the Department of Water and Power, and all communication regarding the bid should be directed to Thomas C. Lee at thomas.lee5@ladwp.com. The place of performance is specified as Los Angeles, CA 90012, indicating the cable will be used within city infrastructure projects. Bidders are required to register on the City of Los Angeles procurement website to participate, and all inquiries about bid language, requirements, or inaccuracies must be addressed to the originating agency, not third-party platforms. The posting was published on August 10, 2026, and while Biddingo.com provides the abstract for informational purposes, it disclaims responsibility for the accuracy or content of the official bid page, which bidders must access directly at their own risk.
Current-Carrying Wiring Device Manufacturing

POSTED

1 day ago

DEADLINE

in 16 days
View Details