Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SEAL, RUDDER BALANCE

Active
SPE4A7-26-T-702SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of 23 units of rudder balance seals under NSN 1560-00-853-6921 for the Department of Defense. The contract requires delivery within 160 days after the order is placed and specifies performance at Tinker AFB. Suppliers must adhere to ISO 9001:2015 quality standards and comply with DLA packaging requirements, configuration change management, and origin inspection and acceptance protocols. The contract contains strict security and regulatory mandates, including the protection of covered defense information and the export control of technical data under ITAR and EAR regulations. Access to technical data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training. While item unique identification is not required, all providers must follow the DLA Master List of Technical and Quality Requirements and ensure no government identification remains on non-accepted supplies.

General Info

DLA Aviation seeks quotes for 23 rudder balance seals by September 4, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-702S RFQ

PDF•20 pages•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Rahsaan Deloney
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SEAL,RUDDER BALANCE
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
SEAL, RUDDER BALANCE RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-00-853-6921 Quantity: 23 EA Purchase Request: 7017916345QTY: 23 Delivery: 160 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Manufacture and Supply of Aviation ARCH (1560-LN0033783)
DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

about 21 hours ago

DEADLINE

in 3 days
View Details
NAICS: 336413
New
DIBBS
Supply of Meggitt Defense Systems Part 50249-1
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
Supply of Sargent Aerospace & Defense Component (P/N 02-0067-6-90 / 23101)
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
Supply of Aircraft Fairings (NSN 1560-01-684-1264)
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
Supply of Rudder Pedal Retainers
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
FRAME, AIRCRAFT
Solicitation # SPE4A7-26-T-694U
Solicitation SPE4A7-26-T-694U is a request for quotations issued by the Defense Logistics Agency Aviation for the procurement of seven aircraft frames, identified by NSN 1560-01-162-0917. The requirement falls under NAICS code 336413 and specifies a delivery period of 100 days after receipt of order, with a need ship date of December 13, 2026, and a final required delivery date of October 19, 2027. Delivery is to be made to the DLA Distribution Depot at Tinker AFB, Oklahoma, under First Destination Transportation terms. This contract contains strict export control requirements, as the technical data is subject to ITAR or EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Quality standards require the manufacturer to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the origin. The procurement also mandates adherence to CMMC Level 2, DFARS safeguarding of covered defense information, and specific packaging and marking standards including MIL-STD-129 and Item Unique Identification per MIL-STD-130. Payment processing must be conducted through the Wide Area WorkFlow system.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
BOOST PUMP BYPASS C
Solicitation # SPE4A7-26-T-696G
Solicitation SPE4A7-26-T-696G is a fixed-price request for quotations issued by DLA Aviation for the procurement of 14 units of Boost Pump Bypass C, identified by NSN 1680-01-585-4867. The requirement is designated as a critical application item with a need ship date of December 8, 2026, and a delivery window of 95 days after award. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and technical compliance, requiring adherence to ISO 9001:2015 and SAE AS9003 standards. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. Notably, Item Unique Identification is not required. Security and regulatory requirements include CMMC Level 2 self-assessment, DFARS 252.204-7012 for safeguarding covered defense information, and compliance with the Buy American and Balance of Payments Program. Payment and receiving reports are to be processed electronically via Wide Area WorkFlow.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
BEAM, STRUCTURAL
Solicitation # SPE8E9-26-T-3728
This contract is for the procurement of 92 feet of structural beams made from 7075 T6 aluminum alloy. The material must be supplied in whole foot lengths between 10 and 12 feet and must comply with various technical standards, including SAE AMS4154S and ASTM B660/B666. A Certificate of Quality Compliance is mandatory for every shipment and must be forwarded to the DLA Troop Support Contracting Officer. Strict marking and eligibility requirements apply, including continuous identification markings on each unit and adherence to the Qualified Suppliers List for Distributors (QSLD). Delivery is set for 167 days after the order, with a required delivery date of January 11, 2027, shipping FOB Origin to DLA Distribution Warner Robins. The contract allows for a quantity variance of plus or minus 10 percent.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
CAP, SERVOVALVE ASSEMBL
Solicitation # SPE7M4-26-T-353F
This contract is a solicitation for the procurement of 20 units of the Cap, Servovalve Assembly, identified by NSN 1630-01-115-5469. Issued by the Department of Defense Fluid Handling Division under solicitation number SPE7M4-26-T-353F, the requirement specifies a delivery timeline of 168 days after the order is placed. The contract is associated with NAICS code 336413 and lists Eaton Aerospace LLC, doing business as Sterer Engineering Div M.C. Aerospace, as a relevant entity. The agreement mandates strict adherence to several technical and quality standards, including DLA packaging requirements, tailored higher level contract quality requirements for manufacturers, and the removal of government identification from non-accepted supplies. Compliance with Cybersecurity Maturity Model Certification Level 2 self-assessment and covered defense information protocols is required. Quality assurance and sampling must follow MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific verification levels assigned to critical, major, and minor attributes.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
COVER, ACCESS, AIRCRA
Solicitation # SPE4A7-26-T-716J
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 15 aircraft access covers, identified by NSN 1560-01-619-7691. The contract is designated as a total small business set-aside under NAICS code 336413, with a required delivery timeframe of 153 days after receipt of order. Performance is centered in Jacksonville, and the solicitation is managed by the ASC Supplier OE and AF Division. The agreement incorporates strict technical and quality requirements, including DLA packaging standards and inspection and acceptance at origin. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and specifies that the technical data is subject to ITAR or EAR export controls, requiring prior authorization for disclosure to foreign persons. Additionally, the contract requires adherence to covered defense information protocols and specific physical identification marking, though item unique identification is not required by the service customer.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, INTERIOR LINI
Solicitation # SPE4A6-26-T-26PK
This contract is for the procurement of one interior lining panel, identified by NSN 1680-01-678-9654 and Northrop Grumman part number 123AV93345-5. The item is designated as a critical application item and must adhere to specific technical and quality requirements, including CMMC Level 2 self-assessment and DLA packaging standards. Delivery is required within 20 days after receipt of the order, with a required delivery date of August 27, 2026. The agreement specifies that inspection and acceptance will occur at the point of origin. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the final shipment is destined for the AIA de Cuers Pierrefeu facility in France.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
ELBOW, PIPE TO HOSE
Solicitation # SPE7M3-26-T-8817
This contract is for the procurement of pipe-to-hose elbows made from cadmium-plated copper alloy, featuring a 90-degree flow angle with a 3/8 inch ID hose size and a 1/4 inch nominal pipe size. The items are designated as critical application components and must be manufactured by an accredited manufacturer listed on the PRI Qualified Manufacturer List or Qualified Products List. The total quantity requested is 25 units across two line items, with delivery required within 140 days. The contract specifies strict adherence to SAE AS5185 and AS4842/2C standards and prohibits the use of Class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with shipments directed to DLA Distribution centers in Barstow, California, and Albany, Georgia. The required delivery date for these items is May 12, 2027, with a need ship date of February 2, 2027.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336310
New
DIBBS
Supply of Stator Assembly, Pump (NSN 2915-00-449-9118)
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332722
New
DIBBS
SPACER, RING
Solicitation # SPE4A7-26-T-716D
This solicitation, issued by the Department of Defense under the ASC Supplier OE and AF Division, is for the procurement of two ring spacers identified by NSN 5365-01-169-9567. The contract requires delivery within 10 days after receipt of order and falls under NAICS code 332722. Performance is designated for Fort Campbell, Kentucky. The agreement is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging and marking standards. It mandates compliance with Cybersecurity Maturity Model Certification Level 2 and covers defense information. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed specialized training to access the data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
STRAP, TIE DOWN, ELECTRI
Solicitation # SPE4A7-26-T-715B
This contract is for the procurement of 36 electrical component tie-down straps, identified by NSN 5975993642501 and part number 15233-452 from KNDS Defence UK Limited. The order is managed by the Department of Defense under solicitation SPE4A7-26-T-715B, with a required delivery date of September 2, 2026, and a delivery timeframe of five days after order. The agreement mandates strict adherence to DLA packaging requirements, including MIL-STD-129 for marking and labeling and ASTM D3951 for commercial packaging if the material is non-hazardous. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination in Texarkana, Texas.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-26-T-716W
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of 570 grooved coupling clamps under NSN 5342-00-693-2433. The contract is designated as a total small business set-aside under NAICS code 332510, with a delivery requirement of 441 days after receipt of order. Performance is centered in New Cumberland, Pennsylvania. Strict compliance is required regarding DLA packaging standards and export control regulations. Because the item contains technical data subject to ITAR or EAR, it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
RACEWAY, METALLIC
Solicitation # SPE4A7-26-T-715M
This solicitation from the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, is for the procurement of one metallic raceway, identified by NSN 5975-01-611-9684. The contract requires delivery within 10 days after receipt of the order and adheres to DLA packaging requirements. The place of performance is designated as Fort Campbell, Kentucky. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completion of required DLA export-control training and questionnaires.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
COVER, TERMINAL BOARD
Solicitation # SPE4A7-26-T-715D
This contract, identified as SPE4A7-26-T-715D, is for the procurement of terminal board covers under NSN 5940-01-563-7716. The order consists of two line items: one for 2 units delivered to the USA DEP Tobyhanna in Pennsylvania and another for 6 units delivered to the Naval Surface Warfare Center PHD in California. Delivery is required within 5 days, with required delivery dates set for August and September 2026. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract prohibits the intentional use of mercury or mercury-containing compounds in the hardware or packaging. Additionally, the supplier must comply with CMMC Level 2 self-assessment requirements and Covered Defense Information regulations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-716Y
This solicitation is for the procurement of one grooved clamp coupling, identified by part number 195792-1 and NSN 5342-01-254-4624. This is a source-controlled commercial item that must be manufactured and tested according to limited rights data provided by Honeywell International Inc. Only vendors with existing access to this data or those who can provide traceability to approved sources, such as Eaton Aeroquip Inc or V.I.J. Corporation, are eligible to quote. A Source Approval Request package is required for companies seeking new source approval. The contract includes strict compliance requirements regarding technical and quality standards, including DLA packaging, configuration change management, and specific sampling methods based on MIL-STD-1916 or ASQ H1331. Additionally, the item is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed mandatory export-control training. Delivery is required within five days after order, and Item Unique Identification is not required for this specific request.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details