Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

1560-000086303 FLOOR,AIRCRAFT WSDC Galaxy C-5 11F

Active
SPE4A726R0749Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of Defense, through DLA Aviation, is seeking small business proposals for the procurement of three aircraft floor units identified by NSN 1560-000086303 under a firm fixed price, definite quantity contract set aside entirely for small businesses. The procurement falls under NAICS code 336413 and requires delivery within 585 days after receipt of order, with FOB destination terms and inspection and acceptance occurring at the origin. First Article Testing is mandated for this item, and while it is not classified as a Critical Safety Item, export control regulations apply. All offers must be submitted via fax to the designated number and must include a completed copy of the solicitation to be considered. The solicitation was issued around September 4, 2026, and is accessible exclusively through the DLA Internet Bid Board System in PDF format, requiring Adobe Acrobat Reader for viewing. Paper copies are not available. Past performance will be evaluated using the PPIRS system, and the final award decision may consider price, past performance, and other factors outlined in the solicitation. The Government has opted out of using commercial item acquisition policies under Part 12 but invites interested parties to indicate if they can supply a commercial item that meets the requirement within 15 days of the notice. The point of contact for inquiries is Rahsaan Deloney, with secondary support from Christopher Mayberry.

General Info

Small business contract for three aircraft floor units, firm fixed price, 585-day delivery, FOB destination, first article testing required.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

Richmond, VA, 23237, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts2 people available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
Rahsaan Deloney
contact@example.gov
+1 (555) 000-0000
Christopher Mayberry
contact@example.gov

Full Description

Show more

Solicitation for End Item: FLOOR, AIRCRAFT NSN- 1560-000086303, PR 7012147681. This is a firm fixed price definite quantity total small business set-a-side acquisition for 3 each. NAICS 336413. FOB Destination, Inspection/Acceptance Origin. Delivery Schedule: 585 days ARO. Export Control Applies. NSN is NOT a Critical Safety Item (CSI). First Article Testing applies to this NSN. Request for a written proposal, please submit offers to fax # (804) 279-4165. OFFERORS MUST COMPLETE A COPY OF THE SOLICITATION IN ORDER TO BE CONSIDERED FOR AWARD. A copy of the solicitation will be made available via DLA Internet Bid Board System at https://dibbs.bsm.dla.mil/ issue date cited in the RFP. From the DIBBS Homepage, select Search RFPs. Then choose the RFP you wish to download. RFPs are in portable document format (pdf). To download and view these documents you will need the lasted version of Adobe Acrobat Reader. This software is available free at http://www.adobe.com. A paper copy of this solicitation will not be available to requestors. The solicitation issue date will be on or about September 04, 2026. All responsible sources may submit an offer, which will be considered. PPIRS will be used to evaluate Past Performance. Based upon market research, the Government is not using the policies contained in Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify with the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item within 15 days of this notice. The final contract award decision may be based upon a combination of price, past performance, and other evaluation factors as described in the solicitation.

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
Duct Assembly, Air C
Solicitation # 70Z03826QJ0000206
The United States Coast Guard’s Aviation Logistics Center intends to award a sole source Basic Ordering Agreement call to Sikorsky Aircraft Corporation, the Original Equipment Manufacturer, for eight units of the Duct Assembly, Air C (NSN 1660-01-395-6232, Part Number 70500-82231-056) under Basic Ordering Agreement SPE4A1-22-G-0005. This requirement is unrestricted and not subject to any small business set-aside, with the North American Industry Classification System code 336413 and Product Service Code 1660. The item is critical to the MH-60T helicopter fleet expansion and is approved exclusively by the USCG’s Aircraft Configuration Control Board for use on this platform due to its complexity, requiring unique production methods and rigorous testing, justifying sole source procurement under FAR 12.102(a). Delivery is requested within 90 days after receipt of order, with early shipments encouraged at no additional cost to the government, and the F.O.B. point is origin. Inspection and acceptance will be conducted at origin by the Defense Contract Management Agency. Quotations from any responsible source may be submitted via email to Cindy.K.Harmes@uscg.mil and mrr-procurement@uscg.mil with the solicitation number 70Z03826QJ0000206 in the subject line, but the response deadline has been extended to August 7, 2026 at 2:00 PM EDT. Award will be based solely on the determination of fair and reasonable pricing, and no formal solicitation package will be issued. While offerors must submit representations under FAR 52.212-3 and certain clauses of 52.212-5 and 52.213-4, the contracting officer will not consider or enforce specific provisions including Paragraph (d) of 52.212-3 and several subsections of 52.212-5 and 52.213-4, despite SAM requirements possibly still prompting their inclusion. The requirement remains under the Basic Ordering Agreement, and no award will be made until pricing is deemed fair and reasonable.
Aviation Logistics Center (ALC)(00038)

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
CANOPY, FIXED
Solicitation # SPE4A7-26-R-0743
The Defense Logistics Agency Aviation is conducting market research under Sources Sought Notice 26R0743 to identify capable vendors for the new manufacture of four CANOPY, FIXED units identified by NSN 1560-01-654-1325 and part number M102-10X1000-11. This is not a formal solicitation, and no contract award is being sought at this time; instead, the government is gathering information to assess industry capacity, technical capability, and willingness to perform under a potential performance-based service acquisition contract. Respondents are expected to demonstrate their ability to manage the full lifecycle of production including procurement of component parts, inspection, testing, preservation, packaging, and shipping, while also showing capacity for supply chain management, logistics planning, forecasting, and addressing diminishing manufacturing sources. Key evaluation criteria for market responses include scope and scale alignment, application of financial and technical resources, project management effectiveness with emphasis on schedule compliance, cost containment, performance tracking, personnel retention, and risk mitigation. The government is considering whether to set aside the eventual procurement for small businesses or pursue full and open competition, with the possibility of multiple awards, based on the responses received. All submissions must be sent via email to Michelle R Scott by August 11, 2026, and must include organizational details, ownership size and type, and tailored capability statements that validate technical and operational readiness. No drawings, technical orders, or qualification requirements are available, and no formal pricing, delivery schedule, or contract clauses have been established. Participation is voluntary, with no reimbursement for costs incurred in responding.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336413
New
Federal
CIRCUIT CARD ASSEMB_End_Item_B-2_NSN_5998014281837FW_PN_795306-10
Solicitation # FD20302700176
The U.S. Air Force, through the 422nd SCMS at Tinker Air Force Base, is conducting market research to identify capable sources for the new manufacture of a Circuit Card Assembly with part number 795306-10 and NSN 5998-01-428-1837FW, intended for use on the B-2 platform. This effort is not a solicitation or a commitment to award a contract; no funds are available at this time, and responses are being gathered solely to assess market capabilities and determine the optimal acquisition strategy, including the potential for a Small Business Set-Aside. The requirement calls for the production of four units, encompassing full manufacturing responsibilities such as component procurement, inspection, testing, packaging, shipping, supply chain management, and handling of long-lead items and diminishing manufacturing sources, with nonrecurring engineering costs potentially borne by the vendor. The Government is seeking information from all eligible businesses, including small businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses, using a North American Industry Classification System code of 336413 with a size standard of 1,250 employees. The response deadline is August 14, 2026, and submissions must be made through the designated email address, with vendors required to select the “Add Me to Interested Vendors” button to be considered. There is no repair component to this requirement—this is strictly a new production spares acquisition. All activities are governed by FAR Part 10, and the place of performance is Tinker Air Force Base, Oklahoma.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
28--DUCT,EXHAUST,AIRCRA
Solicitation # N0038326QFB26
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support is seeking to procure two exhaust ducts for aircraft under NSN 1R-2840-016958298-H5 with part number 06309-02813-103 on a sole source basis due to insufficient, inaccurate, or illegible technical data in government possession that would permit competition from other sources. Delivery will be FOB origin, and the contract is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, which may impact sourcing eligibility. Government source approval is mandatory prior to award, and due to the time-intensive nature of approving new sources, the solicitation cannot be delayed pending such approvals. Prospective offerors who are not currently approved sources must submit a complete set of documentation as outlined in the NAVSUP WSS Source Approval Brochure; proposals lacking this requisite information will be deemed nonresponsive and excluded from consideration. The solicitation is open for responses until September 11, 2026, and all inquiries should be directed to Casey M. Brown at the provided email address or phone number.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
48 LRS - Modular Approach Shoring Kit
Solicitation # FA558726Q0032
The contract seeks two modular approach shoring kits to be delivered to RAF Lakenheath, UK, under a firm-fixed price arrangement with a 90-day delivery window following contract award. The kits must meet stringent technical specifications, including compatibility with C-130, C-17, C-5, LCACs, and JHSVs, a load capacity of 26,000 lbs. per axle, adjustable length from 130 to 788 inches, and height adjustment up to 55 inches, with high-traction rungs, stainless steel handles, steel rod pins, and smooth bonded belting to ensure a maximum cargo floor pressure of 50 psi. All items must be uniquely identified with a two-dimensional Data Matrix barcode compliant with ISO/IEC 16022 and labeled according to MIL-STD-130 and MIL-STD-129, including the marking “UNITED STATES AIR FORCE” on all shipments for customs compliance. The solicitation, issued by the 48th Contracting Squadron under FA558726Q0032, was amended multiple times in July 2026 to refine the Statement of Work and extend the quote deadline to July 31, 2026, with final submissions required via email in PDF, DOCX, or XLSX formats, limited to 20 pages for technical documentation. The contract requires full compliance with a suite of FAR and DFARS clauses, including provisions for electronic payment submissions, executive compensation reporting, prohibition on lobbying and improper payments, and unique entity identifier verification. Pricing is fully fixed with no option quantities, and no cost estimates are provided in the solicitation, leaving the total contract value undefined. Delivery is FOB destination to RAF Lakenheath, with inspections conducted at both origin and destination, though final acceptance rests with the government. Contractors must secure installation access through a 30-day advance submission of personnel data, comply with operational security policies, and adhere to work hours on UK business days excluding US and UK holidays. All shipments must follow ATTLA and DoDM 4140.65 guidelines for packaging and wood material compliance. Invoicing is exclusively through WAWF, with payment routed to an APO address, and all proposals must include completed SAM registration, CAGE code, and taxpayer identification. The government’s award decision will be based on a best-value trade-off between technical capability and
FA5587 48 Cons (admin Only No Req)

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
Federal
53--SEAL,PLAIN
Solicitation # N0038326QFB21
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support in Philadelphia is seeking to award a sole source contract to Sikorsky Aircraft Corp for two units of the SEAL, PLAIN component, identified by NSN 1RM5330016629613H5 and part number 06207-02104-101, under the existing Blanket Purchase Agreement N00383-26-G-P401. Delivery will be made FOB origin, and the procurement is justified solely on the grounds that the Government lacks sufficient, accurate, or legible technical data to support competition with any other source. The requirement is subject to international trade agreements including the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, mandating compliance with FAR 52.225-3 and FAR 52.225-5. Government Source Approval is mandatory prior to award, and due to the time constraints involved in evaluating new sources, the Government cannot delay the award to pursue competition. Any offers must include complete documentation as outlined in the NAVSUP WSS Source Approval Brochure; failure to submit all required information will render a proposal ineligible. The solicitation closes on September 21, 2026, and all inquiries should be directed to Taylor O'Connor at the provided Navy email address.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
F-16 Actuating Cylinder NSN 1650014211187
Solicitation # FA820326Q0013
The Department of the Air Force is seeking proposals for the procurement of F-16 Landing Gear Actuating Cylinders under solicitation FA820326Q0013, with a National Stock Number of 1650014211187 and part number 1211179-216-2. This requirement supports a combined effort for both Foreign Military Sales and domestic USAF needs, with a potential total procurement of up to twelve units. Two pricing structures are proposed to accommodate funding uncertainty: Structure A offers a firm-fixed price for an immediate buy of two units with an option for ten additional units under FAR 52.217-7, while Structure B proposes immediate full funding for all twelve units as basic line items. The Government retains the authority to select either structure based on available funding at the time of contract award. The solicitation indicates the Government’s intent to award on a sole-source basis to Arkwin Industries, the original equipment manufacturer with proprietary rights to this item, identified by CAGE code 98391. However, all responsible sources are invited to submit capability statements or quotations by the deadline of Friday, August 14, 2026, at 12:00 MDT, and may be considered if they can demonstrate authorization and capability to supply the exact part. Proposals must be submitted via email, and the contract will be managed by the Air Force Sustainment Center at Hill AFB, Utah, with primary point of contact Amber Marshall. The NAICS code for this procurement is 336413, indicating aircraft and parts manufacturing, and the offeror must respond within the specified timeframe to be considered.
FA8203 Afsc Pzaab

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
Federal
15--STRUT,AIRCRAFT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB17
The U.S. government, through NAVSUP Weapon Systems Support in Philadelphia, intends to award a sole-source contract to Sikorsky Aircraft Corp for one unit of Aircraft Strut, NSN 7R-1560-016986647-H5, part number M0620-00015-047, under the existing Blanket Order Agreement N00383-26-G-P401. Delivery will be FOB origin, and the requirement is being procured due to the absence of sufficient, accurate, or legible technical data to support competition from other sources. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, necessitating Government Source Approval prior to award. Given the time required to evaluate a new source, the procurement cannot be delayed, and any offeror who is not already an approved source must submit complete documentation as outlined in the NAVSUP WSS Source Approval Brochure; failure to provide all required information will result in disqualification. This action is being conducted under a presolicitation notice with a response deadline of September 21, 2026, and the place of performance is undetermined. Primary point of contact for inquiries is Taylor M. O’Connor at the provided Navy email address.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
NOAA King Air B300C ER Aircraft Landing Assemblies
Solicitation # 1305M226Q0235
The contract is for the procurement of landing assemblies for NOAA’s King Air B300C ER aircraft, aimed at supporting the operational needs of the Aircraft Operations Center. It is a combined solicitation under the Small Business Set Aside – Total program, reserved exclusively for small businesses, with the NAICS code 336413 specifying aircraft parts and accessories manufacturing. The solicitation was posted on August 7, 2026, and responses are due by August 13, 2026. Performance will be coordinated through the Department of Commerce’s National Oceanic and Atmospheric Administration, with the contracting office located in Norfolk, Virginia. All contractual obligations and deliverables must meet NOAA’s technical and operational standards for enhanced safety and mission readiness of the aircraft fleet. The point of contact for this solicitation is Randall Chatfield, who serves as the primary liaison and can be reached via phone or email provided in the posting. Potential bidders must comply with all federal acquisition regulations and small business eligibility requirements, and all proposals must demonstrate compliance with the specific technical specifications for the landing assemblies. The contract will support critical scientific and environmental missions flown by NOAA, ensuring the reliability of the King Air B300C ER aircraft under demanding operational conditions. No place of performance details are listed beyond the contracting office location, indicating work may be performed at the contractor’s facility or other designated sites approved under the award.
Department Of Commerce Noaa

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
Federal
ACTUATOR ASSEMBLY
Solicitation # SPE7M226R0017
The U.S. Department of Defense, through DLA Land and Maritime, has issued a sources sought notice under solicitation number SPE7M226R0017 to explore market availability for the Actuator Assembly identified by NSN 1720-01-034-9526 and part number 612849-3, manufactured in accordance with Navy drawing 80020. This item is classified as a Critical Application Item for Aircraft Launch and Recovery Equipment and must be produced exclusively by approved sources. The government is seeking to procure between 67 and 180 units, with requirements including Contractor First Article Testing and certified Welding Procedures. Vendors must hold Enhanced JCP Certification to be considered and need to obtain technical data access via DLA cFolders, with additional permissions available only through a formal request to jcpvalidation@dla.mil if access is denied. Communication regarding validation status must be directed to DLAJ344DataCustodian@dla.mil, and timely compliance is critical as delays may disqualify vendors from future solicitations. The applicable NAICS code is 336413 with a small business size standard of 1,250 employees. Responses to the market survey must be submitted by August 17, 2026, to Susan Lupo at susan.lupo@dla.mil. This notice does not constitute a solicitation or binding obligation, and no compensation will be provided for submitted information. Final procurement will be determined based on market feedback, and products, if awarded, will be delivered to a DLA stock location.
DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
Federal
16--PISTON,SHOCK STRUT, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QFB27
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support is seeking to award a sole source contract for two piston, shock strut components identified by NSN 7R-1620-011257003-LU and part number 65267-07012-041, intended for repair or modification purposes. The solicitation, under number N0038326QFB27, is being conducted on a sole source basis because the government lacks sufficient, accurate, or legible technical data to support competition with other suppliers. Delivery is FOB origin, and the contract is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, requiring compliance with applicable international procurement rules. Government source approval is mandatory prior to award, and due to the extended time typically needed to approve new sources, the procurement cannot be delayed. Prospective offerors who are not already approved sources must submit all required documentation outlined in the NAVSUP WSS Source Approval Brochure along with their proposal; failure to provide complete information will result in disqualification. The response deadline is September 11, 2026, and inquiries should be directed to Casey Brown at the provided Navy email address. The office responsible is located in Philadelphia, Pennsylvania.
Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
Spring Assembly
Solicitation # 70Z03826QJ0000319
This solicitation, numbered 70Z03826QJ0000319, is a combined synopsis and solicitation for commercial items issued under FAR Subpart 12.201 as a Request for Quotation, with a response deadline extended to August 10, 2026, at 2:00 PM EDT. The requirement is for ten spring assemblies identified by National Stock Number 5340-01-208-1870 and Part Number 70219-02114-044, with a requested delivery date of October 20, 2026. The contract is 100% set aside for small businesses under NAICS code 336413, with a size standard of 1,250 employees, and only certified small business concerns are eligible to respond. All parts must be new and approved, with no drawings, specifications, or schematics provided by the agency; instead, offerors must rely on their own technical knowledge and compliance with applicable standards. A Certificate of Conformance per FAR 52.246-15 is mandatory and must include the NSN, part number, serial number, and purchase order details. Packaging must prevent damage during transport and storage; prohibited materials include popcorn, shredded paper, Styrofoam, and peanut packaging. Each item must be individually packed, and containers must be clearly marked with required identifying information both inside and outside, supporting full traceability throughout the supply chain. Delivery is FOB destination to the USCG Aviation Logistics Center in Elizabeth City, North Carolina, where government personnel will inspect and accept the items based on conformance, condition, and count only. The evaluation process emphasizes technical acceptability as the most critical factor, requiring submission of the manufacturer’s CAGE code, certification of new approved parts, and a compliant Certificate of Conformance. Delivery confidence is assessed based on lead time after award—high confidence if within 60 days, satisfactory between 61 and 90 days, and low confidence beyond 90 days. Price is evaluated for fairness and reasonableness, but the government will use a trade-off approach, favoring the most advantageous proposal when combining technical and delivery performance over lowest cost alone. Offerors must provide their Unique Entity Identifier and comply with safeguarding requirements under FAR clauses including 52.240-93 and 52
Aviation Logistics Center (ALC)(00038)

POSTED

about 8 hours ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE4A526Q0676
The contract is a Small Business Set Aside solicitation for 50 gaskets with NSN 5330013784252, to be delivered to USS WAYNE E MEYER DDG 108 within 123 days of award. The approved source for this item is designated as 03538 1210B3238-1, and only responsible suppliers may submit quotes, which must be received electronically by the deadline. The solicitation, identified by number SPE4A5026Q0676, was posted on August 7, 2026, with responses due by August 11, 2026. No physical copies or technical documentation such as specifications, plans, or drawings are available; all information must be obtained through the provided online portal. The procurement is managed by the Defense Logistics Agency Aviation under the Department of Defense, with the contracting office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, as no other communication channels are authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336415
New
Federal
NSN: 1440-017021074; P/N: 497HN0112-3; RAIL,LAUNCHER,GUIDE
Solicitation # 7014547524
The contract is for the procurement of a RAIL, LAUNCHER, GUIDE with NSN 1440-017021074 and part number 497HN0112-3, under a total small business set-aside. The acquisition will be conducted as a firm fixed price contract for a quantity of 80 units, with delivery required 214 days after the award to the designated location. All items are subject to government first article testing, production lot testing, export control regulations, and are classified as a critical safety item requiring higher-level quality standards. Inspection and acceptance occur at origin with no acceptances permitted. The solicitation, numbered SPE4A6626R0264, is scheduled for issuance on or about August 24, 2026, with proposals due on or about September 24, 2025. Offers exceeding $10 million must include certified cost and pricing data, and all offerors must be registered in SAM.gov to be eligible for award. Alternate offerors must submit a source approval request package along with a completed solicitation copy; failure to allow sufficient evaluation time may result in exclusion from consideration for this procurement, though approval may permit future participation. The award decision will consider price, past performance, and other factors evaluated through the Supplier Performance Risk System. The primary point of contact is Nyjel Knowlin of the DLA Aviation office in Richmond, Virginia, reachable via phone or email.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334290
New
Federal
CONTROL, TRANSMITTER
Solicitation # SPE4A7-26-R-0750
The solicitation SPE4A7-26-R-0750 seeks 62 units of a CONTROL, TRANSMITTER (NSN 5855-01-222-6240, P/N CSA-947280) under a presolicitation notice issued by DLA Aviation in Richmond, VA, with a formal solicitation issue date of August 31, 2026, and a response deadline of August 28, 2026. The procurement is being conducted as other than full and open competition and may involve a reverse auction through the ProcureX system, requiring offerors to self-register and familiarize themselves with the platform. Delivery is required FOB Destination, I/A Origin, with a 268-day window after receipt of order, and the item will be procured from an approved supplier, Teledyne Defense Electronics. The contracting office will evaluate proposals based on a combination of price, past performance, and other undisclosed factors, with no specified award methodology such as LPTA or best value trade-off. No detailed technical specifications, quality standards, packaging requirements, or accounting codes are included in the presolicitation materials, though contractors must be capable of performing inspection, testing, preservation, and packaging consistent with military logistics expectations. All solicitation documents are available only in PDF format via the DIBBS website, and submissions must be electronic; no paper copies are provided or accepted. A primary point of contact for questions is Michelle R. Scott, with a secondary contact available for coordination. While the solicitation indicates potential small business set-aside and requests size status and ownership information, no specific socioeconomic set-asides are confirmed, and no offeror certifications, representations, or detailed evaluation weights have been released. Final contract terms, including pricing, delivery location, inspection criteria, and administrative data, will be defined in the full solicitation and award documents.
Other Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336413
New
Federal
NRP, ROLLER SWAGING / NSN 1680-01-619-9211 / CV-22 AIRCRAFT
Solicitation # SPE4A726R0763
DLA Aviation is conducting market research to identify qualified sources capable of manufacturing the NRP, ROLLER SWAGING item with NSN 1680-01-619-9211, originally sourced from REXNORD INDUSTRIES (CAGE 77896), part number RST3000, for use on CV-22 aircraft. This effort seeks information on potential vendors who can handle full-scale new manufacture including component procurement, inspection, testing, preservation, packaging, shipping, and supply chain management, particularly addressing challenges like diminishing manufacturing sources and long-lead parts. The requirement spans a five-year base period with no existing approved sources, and any new vendor must submit a Source Approval Request to become eligible. The North American Industry Classification System code is 336413, and the government has no complete technical data on this part, making vendor capability and technical expertise critical. Responses must include organizational details, tailored capability statements, documentation of personnel and technical resources, and explanations of any subcontracting or teaming arrangements. Submission is voluntary, non-binding, and does not guarantee future solicitation or compensation for costs incurred. The government will use responses to determine whether to set aside the contract for small businesses or proceed with full and open competition, potentially awarding multiple contracts. All submissions are due by August 13, 2026, and must be emailed to CHRISTOPHER.ROSE@DLA.MIL. No telephone inquiries will be accepted, and no feedback will be provided on submissions.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
HEADSET ASSEMBLY
Solicitation # SPE4A726R0761
This contract is for a Headset Assembly under an Indefinite Quantity Contract with a five-year base period, exclusively set aside for small businesses as defined by the Small Business Administration. The solicitation, issued on August 24, 2026, closes on September 25, 2026, and requires written offers submitted through the DLA Internet Bid Board Systems; no paper copies are available. The estimated annual demand is 1,261 units, with delivery orders ranging from a minimum of 828 to a maximum of 1,261 units per order. FOB destination terms apply, and inspection and acceptance occur at origin. Suppliers must be actively registered in the System for Award Management with annual updates required, and must meet all export control requirements due to the item being classified as a critical application with higher-level controls. Contractor Factory Acceptance Testing is mandatory, with a FAT schedule of 269 days and AFAA at 449 days. Price, past performance, and delivery will be equally weighted in evaluation, with final award decisions based on a combination of these and other solicitation-specified factors. Certified Cost and Pricing Data may be required, and progress payments are not authorized. The Supplier Performance Risk System will be applied, and the item is not considered critical for safety but is vital for mission-critical operations. Four qualified suppliers are listed with the same part number, and the contracting office is located in Richmond, Virginia under the Department of Defense’s DLA Aviation. The point of contact is Montana Kipp, and all submissions must comply with the solicitation posted on the official DIBBS portal. Failure to meet SAM registration requirements or miss submission deadlines will disqualify offers.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 336413
New
Federal
NSN 1620-01-170-7969; ROD ASSEMBLY,NOSE; WSDC: EEN; AIRCRAFT, HAWKEYE E-2C
Solicitation # SPE4A26R0248
The contract is for the procurement of 37 units of the Rod Assembly, Nose, identified by NSN 1620-01-170-7969, specifically for the E-2C Hawkeye aircraft, under a Firm Fixed Price arrangement with delivery terms FOB at Origin and inspection and acceptance at destination. The sole approved source is NORTHROP GRUMMAN SYSTEMS CORPORATION with CAGE code 70974, and the required part number is 123L40021-601. The contract will be awarded based on a composite evaluation of price, past performance, and additional factors outlined in the solicitation, with no set-aside provisions applied. The solicitation, numbered SPE4A26R0248, was posted on August 7, 2026, and responses are due by September 7, 2026, at 7:00 PM Eastern Time. Documentation is exclusively available through the DLA Internet Bid Board System, requiring a PDF reader for access, and no paper copies will be distributed. The contracting office is the Department of Defense’s DLA Aviation, located in Richmond, Virginia, with contact information provided for both primary and secondary points of contact. The place of performance is also in Richmond, Virginia, and the NAICS code associated with the work is 336413 for Aircraft Engine and Engine Parts Manufacturing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541490
New
Federal
Technical Data Package (TDP) Development and SubmissionThe contract involves the development and submission of a complete technical data package in accordance with DLA-WS-VIBB 26-20-1001, encompassing all required manuals, schematics, and maintenance documentation necessary for full technical compliance. The work must be compiled and formatted to meet stringent military standards, ensuring accurate, organized, and submission-ready deliverables that support operational readiness and logistics support for defense systems. This is a subcontract opportunity under the NAICS code 541490, directed by DLA Aviation under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533. The solicitation was posted on August 6, 2026, and responses are due by September 21, 2026, with no set-aside designation specified.
Other Specialized Design Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 611430
New
Federal
Operator Training Program DeliveryThe contract outlines the delivery of an on-site training program for Department of Defense Defense Logistics Agency Aviation personnel focused on the safe operation, routine maintenance, and troubleshooting of high-precision jig grinders. The training is to be conducted at Cherry Point, North Carolina, with a specific emphasis on ensuring personnel achieve proficiency in handling precision machining equipment critical to defense manufacturing and repair operations. The program is classified as a subcontract under NAICS code 611430, indicating it falls under professional and management development training services, and is intended to enhance workforce competence through hands-on, location-specific instruction. The solicitation was posted on August 6, 2026, with a response deadline set for September 21, 2026, allowing potential vendors sufficient time to prepare and submit proposals detailing their methodology, instructor qualifications, training curriculum, equipment requirements, and safety protocols. While the contract does not specify a set-aside designation, it requires execution at the designated government facility where the equipment is in use, ensuring relevance and practical application. Training outcomes must meet operational readiness standards, and all instruction must align with federally mandated safety and technical guidelines for precision machinery use within defense logistics environments.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Federal
Post-Installation Testing and CalibrationThe contract requires comprehensive performance testing, calibration, and verification of jig grinder accuracy following installation, with specific focus on alignment checks and validation of dimensional tolerances to ensure operational precision. This work is critical to maintaining the high standards required for aerospace and defense manufacturing applications, where even minor deviations can impact component integrity and system performance. All testing procedures must adhere to established industry and military specifications to guarantee the equipment meets functional requirements under actual operating conditions. The subcontract is issued under NAICS code 541330 for engineering services and is managed by the Defense Logistics Agency Aviation, a division of the Department of Defense. Performance must occur at Cherry Point, North Carolina, with a response deadline of September 21, 2026. The contract does not specify a solicitation number or set-aside status, and no point of contact information is provided. Bidders are expected to demonstrate technical expertise in precision machinery calibration and proven experience with similar defense-related equipment testing protocols.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
New
Federal
Installation, Rigging, and Unloading ServicesThe contract calls for the on-site delivery, unloading, rigging, and precision installation of two jig grinders at the DLA Aviation facility in Cherry Point, North Carolina, with a zip code of 28533. Services include comprehensive alignment, leveling, and seamless integration of the equipment to meet stringent operational standards, ensuring the machines are fully functional within the facility’s existing infrastructure. All work must be performed according to technical specifications governing industrial machinery installation, with an emphasis on accuracy and safety throughout the process. The contract is classified as a subcontract under NAICS code 238990, with a response deadline of September 21, 2026, and was posted on August 6, 2026. The performance location is at the Department of Defense's DLA Aviation site, and all activities must be completed in compliance with federal contracting requirements applicable to defense-related installations. The scope requires specialized expertise in heavy machinery handling and precision equipment setup, with no set-aside restrictions indicated. The contract does not include point of contact details, and further information is accessible through the provided SAM.gov link.
All Other Specialty Trade Contractors

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333242
New
Federal
High Precision Jig Grinder SupplyThe contract calls for the supply of two new, factory-certified high precision jig grinders that must fully comply with DLA Aviation’s technical specifications and accompanying data package requirements. These machines are critical for precision manufacturing and maintenance operations and must be delivered to the designated place of performance in Cherry Point, North Carolina, with a zip code of 28533. The solicitation is classified as a subcontract under NAICS code 333242, indicating it pertains to the manufacture of machine tools, and is issued by the Department of Defense through DLA Aviation. All equipment must meet stringent certification standards to ensure reliability and performance in defense-related applications. The response deadline for submissions is set for September 21, 2026, at 7:00 a.m., with the opportunity posted on August 6, 2026. There is no specified set-aside designation, meaning this contract is open to all eligible subcontractors without preference-based restrictions. The contract does not list a designated point of contact, and no office address is provided beyond the place of performance. Interested parties must reference the SAM. gov link to access the complete solicitation package, ensuring full alignment with all technical, documentation, and delivery obligations before submission.
Semiconductor Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details