Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

15853 - Vandenberg SFB Hoist-Trolly-Crane Replacement

Active

FA8227-26-Q-1004Federal

Response Deadline08/19/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation titled 15853 - Vandenberg SFB Hoist-Trolly-Crane Replacement seeks qualified vendors to provide replacement hoist-trolley-crane systems at Vandenberg Space Force Base in Lompoc, California, with a NAICS code of 333923 for crane and hoist manufacturing. The solicitation, issued under number FA8227-26-Q-1004, was posted on August 6, 2026, and responses are due by August 19, 2026, at 9:00 PM Eastern Time. This is a sources sought notice with no set-aside applied, meaning all small and large businesses are eligible to respond. Performance must occur at the specified location in Lompoc, CA, while the contracting office is located at Hill Air Force Base, Utah. Primary point of contact is Hugo Ruano Gutierrez, reachable via email or phone, with Lauren Reigenborn as secondary contact for additional inquiries. The solicitation is publicly accessible through the SAM.gov portal for interested parties to review details and prepare submissions.

General Info

Replace hoist-trolley-crane at Vandenberg SFB, CA; proposals due August 19, 2026; open to all businesses.

Agency

Department Of Defense → FA8227 Afsc Ol H PzimView Agency

NAICS

333923 - Overhead Traveling Crane, Hoist, and Monorail System ManufacturingView NAICS

Place of Performance

Lompoc, CA, 93437, USA

Set-Aside

NONE

Documents

(2)

FA8227-26-Q-1004 Vandenberg Hoist-Trolly-Crane Replacement Sources Sought

DOCX•sources-sought

Bldg 9320 Overhead Crane Replacement Statement of Work v2

DOCX•sow

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSources Sought

PostedAug 6

Sources Sought

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 09:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8227 Afsc Ol H Pzim

Contacts2 people available

OfficeHILL AFB, UT, 84056-5805, USA

Organization / Agency

Department Of Defense → FA8227 Afsc Ol H Pzim

View Agency Profile

Office AddressHILL AFB, UT, 84056-5805, USA

Contacts

Hugo Ruano Gutierrez

contact@example.gov

+1 (555) 000-0000

Lauren Reigenborn

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Please see the attached SOW.

Similar Contracts

Same NAICS industry code

Overhead Crane Fabrication & Supply

FA8227 Afsc Ol H Pzim

POSTED

about 23 hours ago

DEADLINE

Defense-Grade Molded Plastic Component SupplyThe contract obligates the supplier to manufacture and deliver 16 units of a military-spec molded plastic component identified by NSN 3950011673909, with strict adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking requirements to ensure full compatibility with Department of Defense logistics and handling protocols. This is a subcontract under a Women-Owned Small Business Set-Aside, targeting qualified WOSB firms, and falls under the NAICS code 333923, indicating specialization in industrial machinery and equipment manufacturing. The place of performance is designated as San Diego, CA, with delivery and compliance obligations tied to this location. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, leaving a narrow window for submissions. While no specific point of contact or agency office address is listed, the contracting entity is identified as the Department of Defense under the organization title CONSTRUCTION & EQUIPMENT MANU & CON. The contract is accessible through the DIBBS portal via a public link, and all bidders must ensure their proposals meet the technical, packaging, and marking standards mandated for military supply chains, with no deviations permitted.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Tensioner Pulley Assembly Supply and DeliveryThe contract entails the procurement and delivery of 56 Tensioner Pulley Assemblies to meet exacting military specifications for packaging, labeling, and transportation. All units must comply with Department of Defense standards to ensure readiness and interoperability within military logistics systems. The work is to be performed under a subcontract arrangement, with the place of performance designated as New Cumberland, Pennsylvania, zip code 17070-5002, indicating the final destination or primary handling location for the delivered items. The North American Industry Classification System code 333923 confirms the industrial category as Other Engine Equipment Manufacturing, aligning the supplier’s capabilities with the technical demands of the assemblies. Responses are due by August 17, 2026, following a posting date of August 5, 2026, providing potential bidders a 12-day window to prepare and submit proposals. The sourcing authority is the Department of Defense through the agency Construction & Equipment Manu & Con, and all interactions must be conducted via the official DIBBS portal linked in the contract details.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Chain Hoist Manufacturing and SupplyThe contract requires the manufacture and supply of eight chain hoists under the National Stock Number 3950-01-178-2932, with strict adherence to technical specifications, packaging standards, labeling requirements, and documentation protocols set by the Defense Logistics Agency. All items must meet government-grade quality and compliance benchmarks to ensure suitability for military use. The procurement is structured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing support for small business participation in defense contracting. The North American Industry Classification System code 333923 identifies the industry as Other Industrial Machinery Manufacturing, aligning the work with specialized machinery production capabilities. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, providing a twelve-day window for submissions. Performance of the contract will be executed at New Cumberland, Pennsylvania, with the zip code 17070-5002 designated as the place of performance. The contract falls under the Department of Defense, specifically the organization titled CONSTRUCTION & EQUIPMENT MANU & CON, indicating oversight by a defense logistics entity focused on equipment procurement. Bidders must access the DIBBS platform through the provided link to submit proposals, ensuring all submissions are processed within the official defense acquisition system. Failure to comply with any technical, regulatory, or procedural requirement will result in disqualification.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2274

The contract pertains to the procurement of seven FRAME, HOIST units under solicitation number SPE8EE-26-T-2274, with a specified delivery timeframe of 167 days after award. The item is identified by NSN 3950-01-680-9587 and linked to purchase request 7017757573. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable references marked by R or I numbers, and the controlling revision depends on whether the acquisition is simplified or large, as defined by solicitation or amendment dates. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract may involve covered defense information under RD003 requirements. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026. Performance is to be delivered to New Cumberland, Pennsylvania, 17070-5002, under the Department of Defense, specifically the Construction & Equipment Manufacture and Construction organization. Primary point of contact is Philip Ferrara, reachable via email and phone listed in the contract data.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

SCREEN, INTAKE COVER, WI

Solicitation # SPE8EE-26-T-2233

The contract requires the procurement of 27 units of a screen intake cover for a winch, with delivery scheduled 167 days after order issuance to the Defense Logistics Agency Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 3950-01-169-8697 and is subject to stringent defense supply chain controls, including compliance with MIL-STD-129 for marking and barcoding, MIL-STD-2073-1E for packaging, and RP001 for DLA-specific packaging requirements. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons unless authorized by the Department of State or Commerce, and access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization. The contract mandates compliance with cybersecurity standards including NIST SP 800-171, safeguarding covered defense information per DFARS 252.204-7012, and requires CMMC Level 2 certification for the offeror as a third-party assessment organization. All offers must be submitted electronically through the DLA Internet Bid Board System prior to the August 17, 2026 deadline under solicitation SPE8EE-26-T-2233, with contract execution anticipated as a firm-fixed-price arrangement. The contractor must adhere to hazardous materials labeling requirements under DFARS 252.223-7001, submit documentation via WAWF for payment, and ensure compliance with FAR and DFARS clauses covering employment equity, trafficking prevention, electronic verification, sustainable products, payment acceleration for small businesses, subcontracting, inspection at destination, and prohibitions on sourcing from Chinese military companies or unauthorized telecommunications equipment. No evaluation factors or weights are specified, indicating potential award under a lowest price technically acceptable methodology, and all representations required under SAM, including UEI and CAGE codes, size status, and socioeconomic certifications, must be current and accurately disclosed.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

SLING, MULTIPLE LEG

Solicitation # SPE8EE-26-T-2264

This contract is for the procurement of three multiple-leg slings with NSN 3940-01-699-9168 and part number D3340 002 from TAYLOR DEFENSE PRODUCTS, LLC, under solicitation SPE8EE-26-T-2264. The items must be delivered FOB origin within 167 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination warehouse in Tracy, California. All packaging must comply with ASTM D3951, but must strictly adhere to the superior requirements of the DLA Master List of Technical and Quality Requirements, including labeling per MIL-STD-129 and palletization as defined by RP001. The unit of issue is each, with a total contract value of $9.00, and the delivery must be completed by February 1, 2027, following the original required delivery date of December 13, 2026. Transportation logistics are governed by DLAD procedural notes C19 and C20, and the sole point of contact for the contract is Philip Ferrara, reachable via phone and email provided. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 333923 for construction and equipment manufacturing.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

FAIRING, RESCUE HOIST, H

Solicitation # SPE8EE-26-T-2251

The contract pertains to the procurement of seven units of a fairing and rescue hoist for helicopter applications, identified by part number 42315-120 and NSN 3950-01-377-3199, supplied by Goodrich Corporation under CAGE code 3HRL4. Delivery is required in 167 days with a firm delivery date of February 1, 2028, and the items must be shipped FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the supplier must comply with DLA’s packaging standards, which mandate adherence to MIL-STD-129 for marking and labeling, ASTM D3951 for packaging, and RP001 for DLA packaging requirements, with DLA’s Master List of Technical and Quality Requirements taking precedence over all other standards. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major and acceptance requires zero non-conformances unless otherwise stipulated. The unit of issue is each, with a total contract value of $7.00 per unit, totaling $49.00, and the procurement is governed under solicitation SPE8EE-26-T-2251, issued on August 5, 2026, with a response deadline of August 17, 2026. The end destination for delivery is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation must conform to DLAD Proc Note C19 for freight and C20 for first destination. Item Unique Identification is not required per customer request, and DFARS 252.211-7003(c)(1)(i) applies. Physical identification of the bare item must include the contractor’s name, CAGE code, and part number in accordance with RQ017. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List, with the revision in effect on the RFP issue date controlling unless amended. The product falls under NAICS code 333923 for defense equipment manufacturing and is classified as a federal acquisition under the Department of Defense.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-26-T-2295

The contract specifies the procurement of 22 chain hoists with NSN 3950012380504 under solicitation SPE8EE-26-T-2295, with delivery required within 305 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and RP001, while the materials must be marked in accordance with MIL-STD-130N. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. First Article Testing is mandatory, requiring one unit from the first ten produced to be tested by the contractor and witnessed by the Government Quality Assurance Representative; the resulting report must comply with MIL-STD-831 and be submitted within 90 days of award. The contractor must also meet QR No. 1201 for general quality assurance and QR No. 12301088 for specific testing procedures. Cybersecurity requirements include CMMC Level 2 Self-Assessment and adherence to Covered Defense Information protocols. A separate line item denotes the First Article Test requirement with a nominal price of $1.00, but no separate charge is assumed if not cited, and waiver of the FAT results in no award for this line. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with strict quantity variance limits of plus or minus 0%.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ADAPTER, HOISTING

Solicitation # SPE8EE-26-Q-0421

The contract pertains to the procurement of 39 units of an ADAPTER, HOISTING with NSN/Part Number 3940-01-127-7500 under solicitation SPE8EE-26-Q-0421, which is a total small business set-aside under FAR 19.5. The delivery is required within 90 days after contract award. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning unauthorized disclosure to foreign persons—regardless of location—is prohibited. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program, having completed mandatory DOD export control training and the DLA questionnaire, and approved by DLA, may access the controlled technical data. The solicitation is managed by the Department of Defense under the organization Construction & Equipment Manufacture & Con, with Ceasal Clyburn as the primary point of contact. Solicitation responses are due by August 15, 2026, and the posting date is August 5, 2026. Additionally, the contractor must be a CMMC Level 2 Certified Third-Party Assessment Organization to meet cybersecurity requirements, and the contract falls under the scope of Covered Defense Information.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ADAPTER, HOISTING

Solicitation # SPE8EE-26-Q-0423

The contract pertains to the procurement of 13 units of an Adapter, Hoisting with NSN 3940-01-127-7500 under solicitation SPE8EE-26-Q-0423, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 90 days of award, with responses due by August 15, 2026. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. firms or subsidiaries. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and the DLA questionnaire, and have received explicit approval from the DLA controlling authority. DFARS 252.225-7048 governs the handling and safeguarding of this controlled information. Additionally, the contractor must be certified under CMMC Level 2 by a certified third-party assessment organization to meet cybersecurity requirements for handling covered defense information. The point of contact for this solicitation is Ceasal Clyburn, reachable via email and phone provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

ADJUSTER ASSEMBLY

Solicitation # SPE7M4-26-T-303J

The contract pertains to the procurement of an ADJUSTER ASSEMBLY with the NSN/Part Number 2030-01-208-3198, for a quantity of three units, with a delivery requirement of 305 days after order. The solicitation, identified as SPE7M4-26-T-303J, was posted on August 5, 2026, with bids due by August 17, 2026, and is managed by the Fluid Handling Division of the Department of Defense. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only contractors certified under the US/Canada Joint Certification Program, with completed DLA export control training and approved access, are permitted to handle the data. The place of performance is Tracy, California, 95304-5000, and the NAICS code is 333923. The contractor must also be certified by a Cybersecurity Maturity Model Certification (CMMC) Level 2 accredited Third-Party Assessment Organization. Point of contact for the solicitation is Rory O'Reilly, reachable at the provided email and phone number.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8227 Afsc Ol H Pzim

Same awarding agency

Crane Removal & Site Restoration

All Other Specialty Trade Contractors

POSTED

about 23 hours ago

DEADLINE

Crane Testing, Commissioning & Certification

Drafting Services

POSTED

about 23 hours ago

DEADLINE

Crane Structural Steel Installation

Structural Steel and Precast Concrete Contractors

POSTED

about 23 hours ago

DEADLINE

Crane Electrical & Control Systems Installation

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 23 hours ago

DEADLINE

Overhead Crane System Design & Engineering

Engineering Services

POSTED

about 23 hours ago

DEADLINE

15340 - Mezzanine & Modular Office

Solicitation # FA8227-26-A-1002

The project titled 15340 - Mezzanine & Modular Office under solicitation number FA8227-26-A-1002 is a Total Small Business Set-Aside governed by FAR 19.5, targeting small business contractors for the design and construction of a 1,200 square foot enclosed mezzanine in the South Center section of Building 238 at Hill Air Force Base, Utah. The scope requires the fabrication and erection of a steel structure with no more than nine support columns and minimal new footings, alongside complete enclosure and finishing of the upper level including walls, ceiling, flooring, cabinetry, and integration of structural, electrical, lighting, data, and fire alarm/suppression systems to support an office, break room, and multi-purpose computer lab/meeting area. All work must comply with Unified Facility Criteria, Hill Air Force Base Facility Design Standards, and applicable local and national building and safety codes, with steel components painted light grey using industrial-grade primer and paint and a minimum 11-foot clear height required beneath the mezzanine. Lighting must be LED with dimmer switches, and all systems must meet occupancy-rated safety standards. The solicitation, posted on May 29, 2026, has undergone multiple extensions to the response deadline, culminating in a final submission date of August 3, 2026, to accommodate questions and revisions following a site visit on July 14, 2026, which required RSVPs by July 10. The questions period closed on July 17, with no further RFIs accepted after that date. Technical proposals must include designed lumen counts for each space and provide either a single optimized solution or dual options if the constraint of nine or fewer columns cannot be met without unacceptable cost or feasibility issues. All email correspondence must be sent to SSgt Ruano Gutierrez and Hideo Mera with the Notice ID and project name included in the subject line. The contract is classified under NAICS code 236210, with performance occurring exclusively at Hill AFB, UT 84056. While the solicitation confirms the set-aside status and technical requirements, specific evaluation criteria, pricing structures, inspection protocols, payment details, or required representations and certifications beyond small business status are not detailed in the available documentation.

Industrial Building Construction

POSTED

DEADLINE

Fatigue Test Stand Spindles

Solicitation # FA8227-26-Q-FTSS

This is a sources sought synopsis issued under solicitation number FA8227-26-Q-FTSS to conduct market research for the procurement of Fatigue Test Stand Spindles for the Power Take-Off Shaft Cyclic Endurance Test Stand 53E19-95B. The notice is not a solicitation, request for proposal, or binding commitment; it is purely for planning and acquisition strategy development purposes, and no contract award will be made as a result of responses. The government is seeking information on industry capabilities, particularly from small businesses including 8(a), HUBZone, Woman-Owned, Service-Disabled Veteran-Owned, and Veteran-Owned concerns, using NAICS code 332721 with a size standard of 500 employees. Respondents are required to provide their business information, including company name, address, CAGE code, point of contact, and self-certification of small business status and socioeconomic designations. They must also disclose any anticipated teaming arrangements, clearly separating the roles and responsibilities of the prime contractor from those of teaming partners, and describe similar services provided to government and commercial customers over the past three years. All responses must be submitted by close of business on August 17, 2026, via email or mail to the designated point of contact at Hill Air Force Base, Utah. The government will use the information gathered to determine whether the requirement is suitable for a total small business set-aside and to shape future procurement actions. The technical requirement involves the delivery of three U10100 spindles, two U10615 spindles, and one UA2086 spindle to Hill AFB, with no pricing or contract line items included in this notice. Intellectual property rights for the spindles remain with the original developer, and any subsequent contract would be governed by DFARS 252.227-7015 regarding technical data rights for commercial products. Responses will not be returned, no questions will be entertained during this research phase, and no formal evaluation factors, delivery schedules, packaging standards, or invoicing procedures are defined at this time.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Specialized Packaging and Delivery to Hill AFBThe contract requires secure packaging, precise labeling, and reliable transportation of completed test spindles from the manufacturer to Hill Air Force Base in Utah, with strict adherence to防护 standards against shock, vibration, and environmental exposure to ensure product integrity. All logistics must meet military-grade specifications, emphasizing durability and traceability throughout the supply chain. The effort is categorized as a subcontract under NAICS code 484220, indicating a focus on specialized freight transportation, and is tied to the Department of Defense through the FA8227 AFSC OL H PZIM office. Response submissions are due by August 17, 2026, with the solicitation posted on August 3, 2026, providing potential offerors approximately two weeks to prepare and submit proposals. The place of performance and agency contact details are not specified in the provided data, but delivery must be coordinated to meet the requirements of the military installation at Hill AFB.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Custom Cyclic Endurance Test Spindle Manufacturing – UA2086 ModelA custom high-complexity UA2086 test spindle is being fabricated for specialized durability testing of PTO shafts, requiring strict adherence to proprietary design specifications and integration standards. This subcontract supports critical end-use testing under controlled cyclic endurance conditions, where precision engineering and material integrity are essential to ensure accurate and repeatable performance data. The contract is posted under NAICS code 332721, indicating industrial machinery manufacturing, and is managed by the Department of Defense through the FA8227 AFSC OL H PZIM office. Proposals must be submitted by August 17, 2026, with the solicitation made available on August 3, 2026. No set-aside designation is specified, and the place of performance and point of contact details are not provided, suggesting the contractor will coordinate closely with the government team to meet technical and delivery requirements under confidential operational constraints.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Custom Cyclic Endurance Test Spindle Manufacturing – U10615 ModelThe contract calls for the manufacture of two custom U10615 test spindles designed for use in existing PTO shaft test stands, with stringent requirements for dimensional tolerances and structural integrity under repeated cyclic loading conditions. These spindles must be engineered to withstand high-stress environments while maintaining precise performance characteristics over extended operational cycles, ensuring reliable data acquisition during endurance testing. The manufacturing process must adhere to rigorous quality control standards to guarantee consistency and durability, as failure could compromise the integrity of the test results and the safety of the test apparatus. The opportunity is classified as a subcontract under NAICS code 332721, indicating precision manufacturing services for industrial machinery components. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, at 9:00 PM, leaving a two-week window for qualified vendors to submit proposals. The contracting entity is the Department of Defense, specifically under the FA8227 AFSC OL H PZIM office, and the work is to be performed without a specified location, implying flexibility in manufacturing site selection as long as delivery and compliance requirements are met. Bidders must demonstrate capability in high-precision machining, materials science expertise for fatigue resistance, and experience with defense-grade testing equipment integration.

Precision Turned Product Manufacturing

POSTED

DEADLINE

Custom Cyclic Endurance Test Spindle Manufacturing – U10100 ModelThe contract mandates the manufacture of three precision-engineered U10100 test spindles specifically designed for integration into a PTO shaft cyclic endurance test stand, adhering strictly to proprietary aerospace design specifications. These spindles are critical components for conducting high-fidelity durability testing under simulated operational loads and must meet exacting tolerances and material standards typical of aerospace-grade instrumentation. The work involves advanced machining, quality validation, and documentation to ensure compliance with unspoken but implied aerospace reliability protocols, with the finished units required to perform reliably under prolonged cyclic stress environments. Submitted under a subcontract classification with NAICS code 332721 for Machine Shops, the opportunity is issued by the Department of Defense through the FA8227 AFSC OL H PZIM office with a response deadline of August 17, 2026. While no set-aside designation or detailed point of contact is provided, the requirement suggests a highly specialized manufacturing capability is needed, likely targeting established suppliers with prior experience in defense or aerospace test equipment. The absence of a specified place of performance implies flexibility in manufacturing location, but final delivery and installation will be tied to the test stand’s operational site, with all deliverables bound to the proprietary technical framework governing the U10100 spindle’s functionality.

Precision Turned Product Manufacturing

POSTED

DEADLINE

15853 - Vandenberg SFB Hoist-Trolly-Crane… | CLEATUS