Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

16--BLD AIR SHUTOFF VLV, IN REPAIR/MODIFICATION OF

Active
N0038326QMB12Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy, through NAVSUP Weapon Systems Support, intends to award a sole-source contract for 26 units of the BLD AIR SHUTOFF VALVE with part number 5626-00-1 and NIIN 015612426 under authority of FAR 6.302-1, citing unusual and compelling urgency or sole source justification. The contract action is linked to the repair or modification of equipment and requires delivery FOB origin with the solicitation number N0038326QMB12. The requirement is not open for competitive bidding and is targeted exclusively at the original equipment manufacturer or qualified non-prime sources; any failure to respond will be interpreted as a lack of interest. Responses must be submitted within 45 days of the notice publication date of August 5, 2026, though this window reduces to 30 days if an existing Basic Ordering Agreement is used for award. All submissions will be evaluated solely to determine whether competition is feasible, with the final decision to proceed without competition resting entirely at the government’s discretion. The point of contact for inquiries is Stacey Ryan of the Philadelphia, PA office, reachable via email or phone, with the performance location unspecified but delivery terms clearly defined as FOB origin.

General Info

Sole-source contract for 26 BLD AIR SHUTOFF VALVES under urgency, FOB origin, no competition, 45-day response window.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
NSN 7R-1680-015612426-E7, TDP VER 003, QTY 26 EA, DELIVERY FOB ORIGIN. The proposed contract action is for the requirement of the following item which the Government intends to solicit and negotiate with only one source under the authority of FAR 6.302-1. NIIN: 015612426 NOMEN: BLD AIR SHUTOFF VLV P/N: 5626-00-1 Qty: 26 Responsible sources may identify their interest and capability to respond to the requirement or submit proposals, quotations or capability statements. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days (30 days if award is issued under an existing Basic Ordering Agreement (BOA) after date of publication of this synopsis will be considered by the Government. A determination by the Government not to compete with this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. NAVSUP WSS intends on awarding sole source to - OEM or Non-Prime Source(s), and that the lack of response from any other source will consider them to be not interested.

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-Q-0394
The contract pertains to the procurement of 10 units of a check valve identified by NSN 4820-01-020-1040, supplied by HYDRO-AIRE AEROSPACE CORP with part number 38-491, classified as a critical application item. Delivery is required 272 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements for Procurement, and the DLA Master List of Technical and Quality Requirements takes precedence over any conflicting standards. The valve must not contain or come into direct contact with mercury or mercury compounds, except under specific exceptions for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; where permitted, portable devices must include shock-proof housing and a secondary containment boundary per NAVSEA 5100-003D. The quantity is strictly fixed with no variance allowed, and the item is to be shipped to the DLA Distribution Depot in Tinker AFB, OK, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7MC-26-Q-0394, posted on August 5, 2026, with a response deadline of August 12, 2026, and the purchase request is 7007472465, with a required delivery date of December 5, 2024.
DEPOT OKLAHOMA

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECT
Solicitation # SPE7MC-26-T-168D
The contract specifies the procurement of a single linear directional control valve identified by NSN 4820-01-227-2995 and part number 106047038, supplied by Bird-Johnson Propeller Company, LLC, for a critical application. Delivery is required within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the final delivery point. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods outlined, and palletization must adhere to DLA’s packaging requirements. The item is subject to strict material controls, including prohibition of intentional mercury or mercury compounds unless exempted for specific functional uses such as batteries, lamps, or weapon systems, with additional containment requirements for portable devices. Non-magnetic materials must meet DOD-STD-2143, maintaining a relative magnetic permeability not exceeding 2.0 as tested per MIL-STD-2142A. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to solicitation or award dates depending on acquisition size. Configuration changes require formal engineering change proposals or variance requests, and removal of government identification from non-accepted supplies is mandatory. The delivery destination is USS WARRIOR MCM 10 at FPO AP 96683, with transportation governed by DLA procedures. The solicitation number is SPE7MC-26-T-168D, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026, under a federal procurement by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
PLU G, TUBE FITTING, T
Solicitation # SPE7M3-26-T-7855
This contract specifies the procurement of a threaded tube fitting plug, identified by NSN 4730015427635 and part number MS21913V5P, in accordance with SAE AS18280H and SAE AS21913E standards. The product must be manufactured or assembled by a qualified supplier listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, and compliance with all applicable DLA Master List of Technical and Quality Requirements is mandatory. The item must comply with Class 3 thread specifications and strictly prohibit the use of ozone-depleting chemicals, with any substitute chemicals requiring prior approval. A Certificate of Conformance is authorized unless explicitly withheld by a quality assurance instruction, and all units must be packaged per ASTM D3951 and labeled according to MIL-STD-129, with palletization following DLA packaging requirements. The contract calls for 834 pack groups, with each pack group containing two units, and the total quantity is non-negotiable with zero variance allowed. Delivery is required in 122 days FOB origin, with inspection and acceptance occurring at the destination. The shipment must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia, using parcel post address SW3119, and must be scheduled for delivery by July 20, 2026, though the original required delivery date is January 15, 2027. Transportation instructions follow DLAD Proc Note C19 and C20, and the contract references U.S. government unit of issue standards. The solicitation was issued under contract number SPE7M3-26-T-7855 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Fluid Handling Division with William Cain listed as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEU
The contract is for the procurement of three solenoid valves, NSN 7H-4810-015103809, model S9515-AL-MMA-010, designated as item 12 under the technical data package version 003, to be delivered to DLA Distribution Norfolk, Virginia. The Government does not hold the data or intellectual property rights necessary to source this part from alternative suppliers, and it has been determined that acquiring such rights or reverse engineering the component is uneconomical. This item is uniquely sourced, and no competing sources exist due to proprietary restrictions. The Government intends to award this contract on a sole-source basis under FAR 6.302-1, but responsible parties may still submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement. All submissions will be evaluated solely to inform the decision on whether competitive procurement is feasible. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as defined by FAR clause 52.209-1. The contracting office is Navsup Weapon Systems Support Mech located in Mechanicsburg, Pennsylvania, with Dianne Wydra as the primary point of contact. The solicitation is issued as a Small Business Set Aside under the SBA program, and any participant must qualify as a small business to be eligible. Access to military specifications and related standards is available through ASSIST-Online or DODSSP, though critical documents such as drawings and deviation lists are not available through these channels.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RYAEY
The contract involves the procurement of 25 units of a solenoid valve, NSN 7H-4810-015101451, model NV822142-1, for repair or modification purposes, with delivery directed to W25G1U at the DLA Distribution facility in New Cumberland, Pennsylvania. The Government does not hold ownership or rights to the technical data necessary to source this part from alternate suppliers, and obtaining such rights or reverse engineering the component has been deemed uneconomical. As a result, the procurement is being conducted under sole source authority per FAR 6.302-1, limiting competition to a single capable provider. All responsible parties may submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement, although this notice is not a formal request for competitive bids. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, in accordance with FAR clause 52.209-1. Technical documentation such as specifications, standards, and Qualified Product Lists can be accessed via ASSIST-Online or through the DoD Single Stock Point, though patterns, drawings, and deviation lists are not available through these channels. The solicitation, numbered N0010426RYAEY, is a Small Business Set Aside with total set-aside status, and the point of contact is Dianne Wydra of the Naval Supply Systems Command, Weapon Systems Support, located in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in 3 months
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 336413
New
Federal
HINGE,AIRCRAFT
Solicitation # N0038326QMB10
The contract pertains to the procurement of HINGE,AIRCRAFT under solicitation number N0038326QMB10, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency based in Philadelphia, Pennsylvania. The solicitation was posted on August 5, 2026, with a response deadline of September 4, 2026, and is classified under NAICS code 336413 for Aircraft Parts and Equipment Manufacturing. The point of contact is Jaclyn Dooling, reachable via email and phone number provided, with all communications required to follow formal Navy protocols. Key contractual clauses mandate compliance with the Buy American Act, Free Trade Agreements, and Balance of Payments Program, requiring certification of domestic content and prohibiting undue pass-through charges. Contractors must adhere to security prohibitions, equal opportunity requirements for workers with disabilities, and mandatory use of Workflow Pro for payment processing and reporting. The warranty for non-complex supplies is 12 months, effective 45 days after defect discovery. A priority rating for national defense use is also applicable. Compliance with the AbilityOne program, royalty information disclosures, and annual representations and certifications are strictly required, with all offeror information subject to release under Navy guidelines.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811210
New
Federal
49--CABLE ASSY TORPEDO,, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QPC34
The contract solicitation is for a flight-critical cable assembly used in torpedo repair and modification, identified by NSN 7R-4920-015824377-HT, with a quantity of six units to be delivered FOB origin. This item requires exclusive sourcing from previously government-approved suppliers due to proprietary engineering designs, specialized manufacturing and repair capabilities, and technical data that are not economically available to the government. Only sources already validated by the design control activity have been solicited, as alternative suppliers cannot be qualified within the required timeframe without compromising mission readiness. Proposals from non-approved sources must include comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, detailing experience with identical or similar items or proof of prior submission for approval. Incomplete submissions will be rejected outright, and award may proceed based on Fleet support needs if source approval cannot be finalized in time. The government has determined this requirement does not fall under FAR Part 12 commercial item acquisition policies, but offers are open for commercial item alternatives if submitted within 15 days. Technical documentation referenced for compliance is accessible through ASSIST-Online or the DODSSP, though drawings, patterns, and deviation lists are not available via these channels. All proposals must be submitted by the response deadline of September 21, 2026, with primary point of contact being Christopher Campellone of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Electronic and Precision Equipment Repair and Maintenance

POSTED

about 7 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 333613
New
Federal
30--SUPPORT,CYLINDER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA56
This solicitation, identified as N0038326QLA56, seeks repair and modification services for a critical flight-critical aircraft launch and recovery component classified as a Critical Safety Item (CSI) requiring engineering source approval from the Naval Air Systems Command. Only pre-approved sources—DRAFTCO INCORPORATED and THE ENTWISTLE COMPANY—are eligible for award, and any new offeror must submit a comprehensive source approval package meeting stringent documentation requirements including configuration drawings, process sheets, production records, and detailed comparative analyses to demonstrate equivalency with approved parts. The item, identified by drawing number 3491AS0504, is used in a system vital to shipboard aircraft operations, where failure could result in catastrophic consequences including loss of life or aircraft, necessitating strict adherence to MIL-STD-130 marking, NAWCADLKE engineering controls, and full compliance with specified repair procedures that must be submitted for prior Navy engineering approval before any work begins. All proposals must include a firm fixed unit price per CLIN with no tiered pricing, submitted by the July 30, 2026 deadline, and remain valid for at least 120 days. Offers will be evaluated primarily on non-price factors—capacity, delivery, and past performance—with price being secondary. Mandatory inspections include 100% inspection of critical characteristics, full 100% inspection of plating, hardness, and non-destructive testing (NDT), and NDT must be performed by NADCAP or ISO 17025-accredited labs. Contractors must facilitate on-site inspections by NAWCADLKE and DCMA representatives, providing all necessary equipment, facilities, and manpower for interim and final inspections, with 14 days' notice required before any inspection. Full quality records must be maintained for seven years and submitted to the Navy’s cognizant technical authority. The contract mandates compliance with Buy American provisions, warranty coverage of 365 days post-delivery with 45 days to report defects, and strict control over manufacturing aids, which the contractor must supply. Failure to meet any source approval, inspection, documentation, or certification requirement will result in disqualification.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332710
New
Federal
CHASSIS,AIRCRAFT
Solicitation # N0038326QPC14
This contract pertains to the repair of a single aircraft chassis, identified by part number 407374-01112 and NSN 015338597, under a sole-source solicitation closed early on August 5, 2026. The work must be performed by an approved contractor at Atec Inc.’s facility in Stafford, Texas, with a required turnaround time of 56 days from receipt of the asset, as recorded in the Commercial Asset Visibility system. The contractor must adhere strictly to the latest technical publications, ensure all repairs restore the item to a Ready for Issue condition, and follow detailed procedures for configuration management, quality assurance, and parts control. All parts used must be new unless otherwise approved in writing by the Procuring Contracting Officer, and cannibalization is prohibited without explicit authorization. The contractor is responsible for providing all tools, materials, and test equipment unless specified as Government Furnished Property. The contract enforces rigorous quality standards compliant with ISO 9001 and SAE AS9100, along with calibration requirements aligned with ANSI/NCSL Z540.3. It includes provisions for Beyond Economical Repair and Beyond Repair determinations, Missing on Induction scenarios, and Over and Above Repair efforts, each requiring prior written concurrence from the Defense Contract Management Agency and the Procuring Contracting Officer before any action is taken. Prices are fixed based on meeting the specified turnaround time, with financial adjustments subject to negotiation if deadlines are not met. The contractor must maintain comprehensive documentation, including process controls and inspection records, for government review, and all modifications to drawings, specifications, or repair sources require formal approval. Delivery must occur via the Navy’s Workflow Pro system, and final payment is tied to government inspection and acceptance. The solicitation emphasizes compliance with Buy American, security, and equal opportunity regulations, and failure to submit all required source approval documentation will result in disqualification.
Machine Shops

POSTED

about 7 hours ago

DEADLINE

in about 1 hour
View Details
NAICS: 336413
New
Federal
15--COVER,ACCESS,AIRCRA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA97
The contract pertains to the procurement of a cover assembly, specifically NSN 7R-1560-016860091-QE, with a quantity of four units, to be delivered FOB origin. This item is designated as flight critical, and its acquisition is restricted to previously approved sources due to proprietary manufacturing knowledge, specialized engineering capabilities, and technical data that are not commercially available or economically feasible for the Government to replicate. Source approval must be granted by the Government’s design control activity, and only entities previously vetted and approved may submit proposals. Any new source seeking qualification must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, with incomplete submissions resulting in disqualification. The timeline for source approval is typically too lengthy to delay award, and the Government will proceed based on fleet operational needs if approval cannot be secured in time. This solicitation is issued under FAR 6.302-1 as a single-source action and is not a competitive procurement, though responsible parties may express interest and submit proposals within 45 days of the notice period unless awarded under an existing Basic Ordering Agreement, in which case the window is 30 days. All offers must demonstrate compliance with qualification requirements at the time of award per FAR clause 52.209-1. Technical specifications, drawings, and standards referenced are not available through the DODSSP system; users must access them via ASSIST-Online or contact the DODSSP help desk for unavailable documents. The Government is not applying commercial item acquisition policies under FAR Part 12, but parties may still indicate if they can meet the requirement with a commercial item within 15 days. Primary contact for inquiries is Kimberly Flores of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania, and proposals must be submitted before the September 8, 2026 deadline to be considered.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334418
New
Federal
49--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QLA96
The contract pertains to the acquisition of seven units of a circuit card assembly used in repair or modification applications, with delivery terms set at FOB origin. Due to the flight-critical nature of the item and the lack of adequate technical data to support full and open competition, exclusive sourcing is mandated under FAR 6.302-1, requiring prior Government source approval. Only previously approved sources are eligible to respond, as they possess unique design capabilities, proprietary manufacturing knowledge, and essential technical data that are not economically available to the Government. Any prospective vendor not already approved must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering either prior experience with similar items or details for new entrants. Proposals lacking complete source approval documentation or evidence of prior submission will be rejected. The Government will not delay award to accommodate new source qualification if timelines preclude it, and award will proceed based on Fleet operational needs. All submissions must be received by September 8, 2026, and responses are only considered if the offeror, product, or manufacturer meets all qualification criteria at the time of award per FAR clause 52.209-1. Market research confirms that commercial item acquisition policies under FAR Part 12 do not apply, though interested parties may still propose commercial alternatives within 15 days. Technical specifications and standards referenced are accessible through ASSIST-Online and DODSSP, with offline requests handled via the DODSSP Help Desk. The acquisition is subject to trade agreements including the Buy American Act—Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as specified in applicable DFARS clauses. The point of contact for qualification inquiries is Kimberly Flores of NAVSUP Weapon Systems Support in Philadelphia, and no competitive solicitation is expected unless the Government determines otherwise based on submissions.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16--SLING HOOK,UNDERSLU, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RFB05
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, intends to sole source a procurement for the repair of 25 sling hooks identified by part number 06850-02821-042 and NSN 7R-1680-016925943-H5 under the Basic Ordering Agreement N00383-26-G-P401. The requirement is classified under NAICS 336413 and FSC 1680, with delivery occurring FOB origin. No technical data, drawings, or intellectual property rights are available to the Government, which restricts procurement to Sikorsky as the sole source capable of fulfilling the requirement. Source authority is grounded in 10 U.S.C. 3204(a)(1) and FAR 6.302, and the Government confirms that no other suppliers can satisfy the operational need. All responsible entities may submit capability statements, but only Sikorsky is anticipated to respond, and the acquisition will proceed without delay for any pending Source Approval Request. The solicitation will follow FAR Part 15 procedures and will not utilize FAR Part 12 commercial item acquisition policies, as determined by market research. This notice is a presolicitation, not a competitive request, and while proposals received within 20 days of the synopsis date will be considered, they will only inform the decision to proceed with sole source procurement. No small business set-aside is planned, and all submissions must be submitted electronically via email to anna.m.kiessling.civ@us.navy.mil; no telephone inquiries or hard copies will be accepted. The opportunity will be posted on NECO, with a response deadline of September 9, 2026, and the procurement will be conducted entirely through electronic processes.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
DUCT ASSEMBLY,AIR C
Solicitation # N0038326QTC08
The contract is for a DUCT ASSEMBLY, AIR C under solicitation number N0038326QTC08, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense office located in Philadelphia, Pennsylvania. Responses are due by September 4, 2026, and the North American Industry Classification System code is 336413. The contract mandates compliance with numerous federal provisions including the Buy American Act, Free Trade Agreements, and Balance of Payments Program requirements, with specific certifications required for domestic content. Contractors must use Workflow Pro’s Assist Module and adhere to Navy-specific payment and invoicing instructions. Early and incremental deliveries are preferred, and all contractual documents are considered officially issued upon electronic transmission, email, fax, or mail. The point of contact is Destiny N. Wiatr, reachable via email, with a primary phone number provided for inquiries. Additional obligations include compliance with security prohibitions, equal opportunity standards for workers with disabilities, and the mandatory release of offeror information under Navy use of AbilityOne contractor provisions. The contract also enforces priority ratings for national defense and energy programs, and requires adherence to royalty and item unique identification standards. All documents related to this procurement are governed by the government’s official issuance policy, establishing bilateral agreement upon proposal acceptance.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
RETAINER STRIP SET,
Solicitation # N0038326QTC05
The contract pertains to the procurement of a Retainer Strip Set under solicitation number N0038326QTC05, issued by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency based in Philadelphia, Pennsylvania. The solicitation was posted on August 5, 2026, with a firm response deadline of September 4, 2026, and is categorized under NAICS code 332722, indicating a manufacturing focus. The contract mandates strict compliance with federal regulations including Buy American provisions, security exclusions, and equal opportunity requirements for workers with disabilities, all effective as of early 2026. It requires adherence to the mandatory use of Workflow Pro Assist Module and specifies Navy-specific payment and documentation procedures tied to the N00383 billing code. Contractors must submit all documentation electronically and conform to government-defined issuance protocols where electronic transmission constitutes official issuance. Early and incremental deliveries are strongly preferred. The point of contact is Destiny N. Wiatr, reachable via email at Destiny.n.wiatr.civ@us.navy.mil, with a phone number listed as 215-697-3528. Additional contractual clauses include provisions for royalty information, priority ratings for national defense and energy programs, and the use of specific certification forms related to trade agreements and balance of payments. The contract imposes rigorous documentation standards, requiring invoice and receiving report alignment with the Wide Area Workflow system, and includes prohibitions and exclusions related to security compliance. All related contractual documents including orders and modifications are considered officially issued upon electronic delivery or mail deposit, and the government’s acceptance of a proposal establishes a binding bilateral agreement. The contract emphasizes complete adherence to federal procurement standards and prioritizes timely, incremental fulfillment.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details