Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

16--BOTTLE OXYGEN,AIRCR

Awarded

SPRPA125REG23Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awarded under solicitation number SPRPA125REG23 is for the procurement of 16-bottle oxygen units designated for aircrew use, classified under NAICS code 325120 for pharmaceutical and chemical manufacturing. The award notice was posted on May 8, 2026, and the procuring agency is the Department of Defense through the DLA Aviation office located in Philadelphia, Pennsylvania, with a postal address of 19111-5098. The primary point of contact for this contract is Michelle R. Krass, APAA, who can be reached via email at MICHELLE.KRASS@DLA.MIL or by phone at (215)737-3972, with fax communications available at (215)737-7149. No specific place of performance has been designated beyond the agency’s location, and there is no set-aside designation specified for this award. The contract details are accessible through the SAM.gov workspace link provided for further reference.

General Info

Procurement of 16 bottle oxygen and aircrew supplies by DoD for aviation support, awarded May 8, 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

Contract Value

$7,886,537

NAICS

325120 - Industrial Gas ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Awardee

ATLANTIC DIVING SUPPLY, INC.View Profile

Award Issued Date

05/07/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

2 updates

PhaseAwarded

PostedFeb 12

Sources Sought

Type ChangedMar 7

Sources Sought → Presolicitation

Type ChangedMar 26

Presolicitation → Solicitation

Amendment 1Apr 9

Contract was updated

Amendment 2Apr 30

Contract was updated

AwardedMay 7

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

MICHELLE R. KRASS

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=0f6c63d4806a405b99891d1d54f50ffe

Similar Contracts

Same NAICS industry code

Lab Gases - RFQ

Solicitation # 1232SA26Q1051

Solicitation 1232SA26Q1051 is a request for quotations for a lab gases requirements contract issued by the USDA Agricultural Research Service. The contract is structured with five one-year ordering periods and is open to all responsible sources under NAICS code 325120 for Industrial Gas Manufacturing. Performance will take place in Wenatchee, Washington, and the acquisition follows the Revolutionary FAR Overhaul guidelines for commercial items. Interested parties must submit their quotes to the designated points of contact by September 15, 2026. A single site visit is scheduled for September 8, 2026, with a registration deadline of September 7, 2026. All written inquiries regarding the solicitation must be submitted by September 10, 2026. While estimated quantities are provided in the solicitation attachments, these values are not guaranteed.

USDA Ars Afm Apd

POSTED

about 22 hours ago

DEADLINE

Bulk Carbon Dioxide Supply and Delivery

National Institutes Of Health Niaid

POSTED

DEADLINE

Bulk Liquid Nitrogen Supply and Delivery

National Institutes Of Health Niaid

POSTED

DEADLINE

Gas Generator Replacement Parts Supply

Tribal & Science Division Water

POSTED

DEADLINE

Liquid Nitrogen Procurement and Delivery Services

Department Of Commerce Nist

POSTED

DEADLINE

Bulk Liquid Nitrogen and Carbon Dioxide Refill Services for the National Cancer Institute (NCI)

Solicitation # NOI-PCA-NCI-26-10776

The National Cancer Institute requires uninterrupted refill and delivery services for bulk liquid nitrogen and carbon dioxide to support laboratory and research operations at its Bethesda, Maryland facilities. These gases are critical for cryogenic storage, the preservation of biological materials, and the operation of research equipment. The period of performance is scheduled from October 15, 2026, to October 14, 2027. The government intends to award a firm-fixed price purchase order to Roberts Oxygen Company, Inc. as a sole source provider. This decision is based on the provider's existing knowledge of the site and the fact that the current infrastructure is configured for their equipment. Transitioning to a new supplier would pose an unacceptable operational risk and potential disruption to temperature-sensitive research materials.

National Institutes Of Health Niaid

POSTED

DEADLINE

NITROGEN COMPRESSOR

Solicitation # FA480926Q0090

Solicitation FA480926Q0090 is a firm-fixed-price request for the procurement of one Bauer SNG III-3 Nitrogen generator or an equivalent unit under NSN 3655-01-505-7616. The equipment must provide a minimum nitrogen flow of 16 SCFM at 98 percent purity with a standard discharge pressure up to 5,000 PSIG. Technical requirements include a 4-stage membrane pre-filtration system, compatibility with existing modular high-pressure cylinder storage, a 230 Volt 3-Phase AC 60 Hz power requirement, and specific physical dimensions not exceeding 108 inches wide by 53 inches deep by 81 inches high. The unit must be self-contained, turnkey, and equipped with forklift pockets and lifting eyes for operation in temperatures between 40 and 140 degrees Fahrenheit. This acquisition is a total set-aside for Small Business and Women-Owned Small Business (WOSB) under NAICS 325120. Quotes are due by September 14, 2026, and will be evaluated based on price fairness, technical capability, delivery, and past performance. The successful contractor must deliver the equipment to Seymour Johnson Air Force Base in North Carolina within 120 calendar days of the award receipt. Compliance requirements include MIL-STD-130 for item marking and MIL-STD-129 for shipment labeling, with all invoicing and receiving reports processed through Wide Area WorkFlow.

FA4809 4TH Cons Squadron Cc

POSTED

DEADLINE

Request for Information/Sources Sought Notice for Providers/Suppliers of Liquid Nitrogen and Related Services

Solicitation # NIST-SS26-179

The Department of Commerce NIST is issuing a Request for Information and Sources Sought Notice under solicitation number NIST-SS26-179 to identify capable providers and suppliers of liquid nitrogen and related services. This opportunity is categorized under NAICS code 325120 and is open to all interested parties as there is no specific set-aside designated for this requirement. The place of performance is located in Gaithersburg, Maryland. Interested vendors must submit their responses by the deadline of September 24, 2026. Primary inquiries regarding this notice should be directed to Nina Lin, with Donald Collie serving as the secondary point of contact.

Department Of Commerce Nist

POSTED

DEADLINE

Supply of Globe Valves (NSN 4820011688308)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Pipeline Valves and Appurtenances Supply

POSTED

DEADLINE

Medical-Grade Bulk Liquid Oxygen Supply

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

QPL-Certified Bulk Lubricant Supplier

POSTED

DEADLINE

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # SPRPA126QUB95

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--TAXI,NOSE GEAR,AIR

Solicitation # SPRPA126QUC02

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,CROSS

Solicitation # SPRPA126QUC03

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC35

This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--CABIN TEMPERATURE I

Solicitation # SPRPA126QUB92

This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

NRP,FWD FAIRING ASS

Solicitation # SPRPA126QUB93

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND ST

Solicitation # SPRPA126RVC02

This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS