Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

16--C0NTROL COLUMN,AIRC, IN REPAIR/MODIFICATION OF

Active
N0038326QBA42Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicits five units of a flight-critical control column assembly for aircraft repair and modification, identified by NSN 7R-1680-014752012-V2, with delivery terms FOB origin. The item requires prior Government source approval due to its critical nature and the absence of adequate technical data to support full and open competition. Only previously approved sources have been solicited, as proprietary design capabilities, manufacturing knowledge, and technical data essential to maintaining part quality reside exclusively with these sources and are not economically available to the Government. Any new source seeking to bid must submit complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering either prior experience with identical or similar items or detailed technical justification if the item has never been produced. Failure to provide all required data or proof of a currently pending approval submission will result in disqualification. Approval timelines for new sources typically preclude delays in award, and the Government may proceed based on fleet support needs if approval cannot be granted in time. This solicitation does not apply FAR Part 12 commercial item acquisition policies, but vendors may propose commercially available alternatives within fifteen days. All technical references, specifications, and standards must be obtained through ASSIST-Online or DODSSP, as patterns, drawings, and purchase descriptions are not maintained by DODSSP. The lead point of contact is Rebecca L. Jordan of NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania, with proposals due by September 15, 2026.

General Info

Five flight-critical control column assemblies solicited from approved sources only, FOB origin, no commercial item policies, proposals due September 15, 2026.

Agency

Department Of Defense → Navsup Weapon Systems SupportView Agency

NAICS

N/A

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA
Contacts
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
NSN 7R-1680-014752012-V2, TDP VER 007, REF NR 185800-113, QTY 5 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs. The NAVSUP WSS Commercial Item Identification Brochure is now available at: "https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Bus iness-Opps/" Interested parties may obtain copies of Military and Federal Specificationsand Standards, Qualified Products Lists (QPLs), Qualified Product Databases(QPDs), Military Handbooks, and other standardized documents from the DoDSingle Stock Point (DODSSP) at Document Automation and Production Service(DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSISTHelp Desk at 215-697-2667 or 215-697-2179 (DSN: 442-2667), or mail their request to DLADocument Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify tothe contracting officer their interest and capability to satisfy theGovernment's requirement with a commercial item within 15 days of this notice.

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 811310
New
Federal
59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RBA39
The contract solicitation for NSN 7R-5990-014606390-V2, titled "59--ROTOR POSITIONING U, IN REPAIR/MODIFICATION OF," requires the procurement of 34 units with delivery terms FOB origin. This item is flight critical and subject to strict Government source approval due to the unique design capabilities, proprietary engineering knowledge, and specialized manufacturing or repair expertise held exclusively by previously approved sources. Technical data and manufacturing processes essential to maintaining the part’s integrity are not economically available to the Government, and acquisition from alternate sources is prohibited unless they successfully qualify through formal procedures approved by the cognizant Government engineering activity. Only sources previously sanctioned by the Government have been solicited, and new sources must submit comprehensive documentation per NAVSUP WSS Source Approval Information Brochures to be considered. Proposals lacking complete required information or evidence of prior submission will be deemed nonresponsive. The Government has determined that commercial item acquisition policies under FAR Part 12 do not apply, and the timeline for new source qualification is insufficient to delay award. Offers must be submitted by the deadline of September 15, 2026, and award may proceed based on critical Fleet support needs if approval cannot be secured in time. All technical specifications and standards referenced can be accessed via ASSIST-Online or the DODSSP, while inquiries are to be directed to the designated point of contact at NAVSUP Weapon Systems Support in Philadelphia, PA.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--PROCESSOR,COUNTERME, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA79
The contract opportunity pertains to the repair or modification of a processor classified under NSN 7R-5865-015492378-QF with Technical Data Package version 001, requiring seven units to be delivered FOB origin. It is issued under solicitation number N0038326QMA79 by the Naval Supply Systems Command Weapon Systems Support, a branch of the Department of Defense, with the office located in Philadelphia, Pennsylvania. The solicitation was posted on July 16, 2026, and responses are due by August 31, 2026, at 4:00 a.m. Eastern Time. This is a presolicitation notice indicating the government is seeking industry input prior to formal release, and no set-aside type has been determined. The primary point of contact is Autumn M. Rau, reachable via email at Autumn.M.Rau2.civ@us.navy.mil or by phone at (717) 697-4313, with additional fax and email details provided for correspondence. The place of performance is undefined, and no NAICS code has been assigned.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
New
Federal
66--DISPLAY UNIT,FLIGHT
Solicitation # N0038326RMA89
The contract solicitation is for a display unit, flight, identified by NSN 7R-6610-016935532-E7 and reference number 8940663-0004, with a quantity of two units to be delivered FOB origin. The solicitation is issued under N0038326RMA89 by the Naval Supply Systems Command Weapon Systems Support, a Department of Defense agency, and was posted on July 31, 2026, with responses due by September 4, 2026. This is a presolicitation notice, indicating that the formal solicitation has not yet been issued, and no set-aside classification or NAICS code has been assigned. Delivery will originate from the contractor’s location with no specified place of performance beyond the FOB origin term. The primary point of contact is Peter A. Kobryn, reachable at the provided email and phone number, based at the office located in Philadelphia, Pennsylvania, ZIP code 19111-5098. Interested parties should monitor the SAM.gov link for updates or the official solicitation release.

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
66 - FMS Repair - Control Display Unit
Solicitation # N0038326QF165
The U.S. Navy, through NAVSUP Weapon Systems Support in Philadelphia, is seeking a sole source repair for one Control Display Unit with National Stock Number 6605-016040696 and part number 292A860-3, designated as a Critical Application Item under FMS Case SR-P-MAL. Due to the lack of sufficient, accurate, or legible technical data in government possession, the requirement cannot be competitively sourced and must be awarded under an existing Blanket Ordering Agreement to the current approved provider. The item is subject to Free Trade Agreements and the World Trade Organization Government Procurement Agreement, requiring Government Source Approval prior to award, and delays in securing a new approved source would impede timely fulfillment. Proposers not already approved must submit all requested documentation as outlined in the NAVSUP WSS Source Approval Brochure, or their proposal will be disqualified. The contract includes a 365-day induction period for the initial unit, with the government retaining the right to extend this period by an additional 365 days, and any unused capacity from the first year may be carried forward. Contractors must provide pricing for up to ten total units over the full contract term, including the initial unit, with separate pricing if costs change after the first year. The total contract value for evaluation purposes will be based on the highest proposed unit price multiplied by the maximum quantity. Offers must be submitted by August 5, 2026, and inquiries should be directed to Dana Scott at the provided email address.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
Federal
53--RIVET,SOLID
Solicitation # N0038325QT596
The contract pertains to the procurement of 1,500 solid rivets under solicitation N0038325QT596, issued by the Naval Supply Systems Command Weapon Systems Support in Philadelphia, Pennsylvania, with the NAICS code 332722. The closing date has been amended to February 20, 2026, following a prior revision that set it to May 18, 2026, and the original quantity of 1,643 units was reduced to 1,500. The buyer code has been updated to N791.13, and all other terms remain unchanged. The point of contact is Carolyn A. Clark, reachable via email at carolyn.a.clark30.civ@us.navy.mil and telephone at 771-229-0402. The contract incorporates numerous federal clauses including Buy American Act requirements, Equal Opportunity for Workers with Disabilities, Annual Representations and Certifications, and Navy-specific protocols for AbilityOne contractors and payment instructions. Delivery is expected to be early and incremental, and contractual documents are deemed issued upon electronic transmission or mail deposit. The primary item is a solid rivet with no specified place of performance beyond the general agency location.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
Federal
CAP SET,PROTECTIVE,
Solicitation # N0038326QSB23
The solicitation seeks protective capacity sets under NAICS code 332510, issued by the Navy’s Naval Supply Systems Command Weapon Systems Support from Philadelphia, Pennsylvania, with a response deadline of August 31, 2026. Contracts are awarded on a fixed-price basis, and all items must meet strict inspection and acceptance standards, including a twelve-month warranty with a sixty-day discovery period for defects. Source approval from NAVSUP WSS is mandatory, and proposals lacking required documentation from the official source approval brochure will be disqualified. Delivery must comply with FMS instructions, and early or incremental shipments are preferred. Contractual documents are deemed issued upon electronic transmission or mailing, and acceptance of the proposal constitutes binding agreement. The contract enforces stringent compliance with Buy American provisions, security restrictions, equal opportunity policies, and mandatory use of Workflow Pro for payment processing. All deliveries must adhere to national defense priority ratings, and the contractor must be prepared to meet requirements under AbilityOne and other federal mandates. Contact is handled by Juliana Fiandra, and payment details, delivery locations, and other administrative data remain pending until award.
Hardware Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA75
The contract solicitation pertains to the repair or modification of a counter transmitter, identified by NSN 7R-5865-014980544-QF and TDP VER 001, with a quantity of six units required. The work is to be performed under a presolicitation notice issued by the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense. Delivery is specified as FOB origin, meaning the supplier is responsible for the goods until they are loaded at their facility, after which responsibility transfers to the government. The solicitation was posted on July 16, 2026, with a response deadline of August 31, 2026, at 4:00 AM. The primary point of contact is Autumn M. Rau of N761.07, reachable via email at AUTUMN.M.RAU2.CIV@US.NAVY.MIL or by phone at (717) 697-4313, with a fax number provided for additional communication. The office is located in Philadelphia, Pennsylvania, with no specific place of performance detailed beyond the issuing agency. There is no set-aside designation or NAICS code listed for this solicitation, indicating it is open to all eligible offerors.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
16 - FMS Repair of ESM RECEIVER PROCESSOR
Solicitation # N0038326RF061
NAVSUP WSS is soliciting a sole source contract for four ESM RECEIVER PROCESSORS with NSN 1680 017158596 and part number AU263A995-0299, citing insufficient, inaccurate, or illegible data in government possession that prevents competition from other sources. The items are classified as FMS Unique and are subject to both the World Trade Organization Government Procurement Agreement and applicable Free Trade Agreements, requiring compliance with FAR 52.225-3 and FAR 52.225-5. Government Source Approval is mandatory prior to award, and proposers who are not already approved sources must submit all required documentation as outlined in the NAVSUP WSS Source Approval Brochure; proposals lacking complete information will be rejected. The solicitation, numbered N0038326RF061, was posted on July 31, 2026, with proposals due by August 17, 2026, and falls under NAICS code 336413 with no set-aside provisions. All inquiries should be directed to Dana Scott at the provided Navy email address.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 336413
New
Federal
1680 - This is a FMS repair requirement for the repair and upgrade of NSN 7RH 1680 015830119
Solicitation # N0038326QH085
This contract addresses the repair and upgrade of two units of NSN 7RH 1680 015830119, Part Number 2030584-001, under a Foreign Military Sales agreement with Switzerland. The procurement is being conducted as a sole source action with DRS TRAINING AND CONTROL SYSTEMS, LLC, due to the lack of available technical data from the government and the requirement for prior government source approval. The items are government property, governed by FAR clauses 52.245-1 or its alternate, and repairs must align strictly with authorized design controls. While the government anticipates only one acceptable offer, responsible sources not previously approved may submit capability statements, proposals, or quotations provided they meet the stringent source approval requirements outlined by NAVSUP WSS. All submissions must include specific details such as company name, CAGE code, part number eligibility, OEM status, technical capability justification, small business designation, and point of contact, and must be sent to the designated email address by the deadline. Failure to submit complete documentation as mandated by the NAVSUP WSS Source Approval Information Brochure will result in rejection, and no award will be delayed to await source approval processing, as timelines for new source qualification typically preclude schedule accommodation. Offers must be received by August 16, 2026, and although this is a presolicitation notice and not a competitive request, all submissions received within five days of publication will be evaluated. The government retains full discretion to determine whether to proceed without competition, and only offerors who meet all qualification criteria at the time of award will be considered. Commercial item proposals are accepted if submitted within 15 days of notice, but the acquisition will not follow FAR Part 12 procedures. Additional information and qualification requirements are available through the primary point of contact, Alexis Hoepfl, and the procurement is managed by the Department of Defense under NAVSUP Weapon Systems Support in Philadelphia, Pennsylvania.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 334290
New
Federal
58--COMPUTER,DIGITAL DA, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA72
The contract solicitation NSN 0R-5895-016740122-E7 under solicitation number N0038326QMA72 seeks five units of a digital computer system designated for repair or modification, with delivery terms specified as FOB origin. The request, posted on July 14, 2026, requires responses by August 31, 2026, and is categorized as a presolicitation, indicating it is an early-stage notice seeking industry input rather than a formal bid opportunity. The item is procured by the Navy Supply Systems Command Weapon Systems Support, operating under the Department of Defense, with the office located in Philadelphia, Pennsylvania. The place of performance is not specified, and no set-aside status or NAICS code is provided. Primary point of contact for inquiries is Ethan T. Stein, reachable via email or phone at the Philadelphia office, serving as the designated representative for this procurement.
Other Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
Federal
SENSOR DEVICE
Solicitation # N0038326RMA90
The contract pertains to the repair, overhaul, and testing of a SENSOR DEVICE identified by part number 1011850-101 and NSN 1680-01-671-2764, under solicitation N0038326RMA90, issued by the Navsup Weapon Systems Support office. All repairs must strictly adhere to the latest approved technical publications and repair manuals, with any deviation requiring formal review and written approval from the Basic Design Engineer and the Procuring Contracting Officer. The contractor is responsible for providing all facilities, labor, tools, materials, and parts necessary to return units to a Ready for Issue condition, unless specifically designated as Government Furnished Material. Items deemed Beyond Economical Repair, Missing on Induction, or requiring Over and Above Repair must be documented and approved by DCMA and the PCO before any work proceeds, with no entitlement to price adjustments if such requests are denied. The contractor must maintain a certified quality management system compliant with ISO 9001/SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or equivalent standards. All purchased components must be new and conform to approved drawings and specifications, with receiving inspections documented and retained for government review. Cannibalization is prohibited unless explicitly approved by NAVSUP WSS and the Basic Design Engineer. The work must be performed at the designated location in Melbourne, FL, under the company DRS Network & Imaging Systems, with a CAGE code provided. Configuration management must follow NAVSUP WSS clause NAVICPIA18, and all changes to drawings, sources, or facilities require written government approval. Packaging must comply with MIL-STD 2073, and the contractor must ensure secure, enclosed storage for both incoming and repaired items. The contract includes mandatory compliance with federal acquisition regulations governing Buy American provisions, safeguarding of arms and explosives, equal opportunity, and electronic invoice submission via Wide Area Workflow. The government accepts early and incremental deliveries, and all contractual documents are deemed issued upon electronic transmission or mail deposit. Proposals are due by August 31, 2026, and the point of contact is Ethan T. Stein at the U.S. Navy.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER,COUNTER, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMA76
The contract solicitation pertains to the repair or modification of a transmitter, counter, identified by NSN 7R-5865-014980544-QF, with a quantity of six units required. The technical data package version is VER 001 and the reference number is 2680605G001. Delivery is specified as FOB origin, meaning the buyer assumes responsibility for transportation costs and risks once the items leave the seller’s location. The solicitation, numbered N0038326QMA76, was posted on July 16, 2026, with a response deadline of August 31, 2026. It is classified as a presolicitation, indicating it is for informational purposes prior to formal bidding. There is no set-aside designation, and no NAICS code is provided. The contracting activity is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. Primary point of contact is Autumn M. Rau, reachable via email and phone, and all correspondence should be directed through the provided contact details. The place of performance is unspecified.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details