This Government Contract opportunity from Department Of Defense was posted on August 1, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

16--SEAT,AIRCRAFT

Awarded

N0038323RA323Federal

Submission Closed07/30/2024, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Supply of Spacer, Sleeve (NSN 5365-01-034-2519)This subcontract, set aside for total small businesses under NAICS code 336413, involves the manufacture and delivery of 124,000 sleeve spacers, identified as NSN 5365-01-034-2519, for the Defense Logistics Agency Weapons Support ASC. The selected provider will supply these units to DLA Depots, ensuring all items are produced and delivered according to strict military and industry standards. Technical requirements include sampling per MIL-STD-1916 or ASQ H1331, packaging according to ASTM D3951 and RP001, and marking and labeling in compliance with MIL-STD-129. Additionally, the contractor must maintain CMMC Level 1 certification and adhere to all ITAR and EAR export control regulations to ensure the security and legality of the supply chain.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Antenna-430 ADF Repair and Overhaul ServicesThis subcontract involves providing repair and overhaul services for the Antenna-430 ADF, A1, supporting prime contractors on projects for the Department of Defense Navsup Weapon Systems Support. The scope of work includes the complete teardown, evaluation, and modification of units, where defective components are identified and replaced based on approved repair manual limits. All work must be performed using specialized avionics testing equipment and must strictly adhere to IPC/EIAJ-STD-001C soldering standards to ensure units are delivered in Ready for Issue condition. The opportunity is categorized under NAICS code 336413 and was posted on October 20, 2026, with a response deadline of November 19, 2026. This technical engagement focuses on maintaining critical aviation components to meet rigorous military specifications and operational readiness requirements.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Component SupplyThis subcontract, titled Aircraft Wheel Component Supply, involves providing replacement components, seals, and hardware to prime contractors supporting NAVSUP Weapon Systems Support aircraft wheel overhaul projects. The scope specifically focuses on delivering certified aircraft-grade replacement parts and aviation-grade alloys that meet approved repair manual specifications for NSN 1630-14-597-7780. Managed under the Department of Defense, the contract requires strict adherence to the Buy American Act and Trade Agreements certifications. Additionally, the supplier is responsible for providing Material Safety Data Sheets for any hazardous materials delivered. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, falling under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Wheel Half Repair and Overhaul ServicesThis subcontract for Aircraft Wheel Half Repair and Overhaul Services supports NAVSUP Weapon Systems Support projects within the Department of Defense. The scope of work involves the comprehensive teardown, evaluation, repair, and overhaul of aircraft wheel halves under NSN 1630-14-597-7780. The selected provider will be responsible for disassembling units, cleaning and inspecting parts according to approved manuals, replacing defective components, and reassembling the units using specialized fixtures, jigs, and test equipment. All deliverables must be provided in Ready for Issue condition and must strictly comply with MIL-STD-130 and MIL-STD-129 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Flight Model Solar Array Wings SupplyThis subcontract involves the supply of flight-ready, qualified solar panel sets for prime contractors working on NASA/NSSC TERP RAPTOR 12U CubeSat projects. The selected provider is responsible for manufacturing solar array wings that adhere to strict space-flight specifications, utilizing space-grade solar cells, flight-qualified substrates, and deployment mechanisms specifically designed for the 12U CubeSat standard. All deliverables must meet the rigorous acceptance and verification standards established by the NASA Goddard Space Flight Center. The final requirement is the delivery of a complete set of flight-ready solar array wings, with performance taking place in Greenbelt, Maryland.

National Aeronautics And Space Administration

POSTED

DEADLINE

Component Evaluation and InspectionThis subcontract, titled Component Evaluation and Inspection, is issued by the Navsup Weapon Systems Support under the Department of Defense. The project involves performing technical evaluations and inspections of spoiler assemblies for prime contractors working on Department of the Navy aerospace projects. The primary objective is to identify structural cracks, corrosion, or fatigue through the application of Non-Destructive Testing methods, specifically X-ray, Ultrasonic, and Dye Penetrant techniques. Qualified providers must hold ASNT or equivalent aerospace inspection certifications to ensure technical compliance. The final deliverable for this engagement is a detailed evaluation report that includes specific recommended repair actions. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, and falls under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Component SupplyThis subcontract, titled Spoiler Assembly Component Supply, is issued by Navsup Weapon Systems Support under the Department of Defense. The agreement focuses on the procurement of aerospace-grade replacement parts, fasteners, and sub-components necessary for the repair of NSN 1680-01-650-9016. The supplier is responsible for sourcing OEM or approved equivalent parts that match Reference Number 81205 113A4600-406 to support prime contractors on Department of the Navy aerospace repair projects. To ensure regulatory and origin compliance, the provider must furnish Buy American and Trade Agreements certifications. The contract falls under NAICS code 336413, with a posting date of October 20, 2026, and a response deadline of November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Spoiler Assembly Teardown and RepairThis subcontract, managed by Navsup Weapon Systems Support for the Department of Defense, involves the teardown, evaluation, and repair of NRP Spoiler Assemblies (NSN 1680-01-650-9016) for Department of the Navy aerospace projects. The selected contractor will be responsible for disassembling the units, conducting technical evaluations for wear and damage, and performing necessary repairs or modifications in strict accordance with OEM or military specifications. The work requires the use of precision measuring instruments and aerospace-grade tooling to ensure the delivery of certified, serviceable assemblies. Additionally, the contractor must possess CAV RP reporting capabilities to meet the administrative requirements of the project. The solicitation was posted on October 20, 2026, with a response deadline of November 19, 2026, under NAICS code 336413.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aircraft Skin Component Supplier (NSN 1560-01-723-6222)This subcontract involves the supply of aircraft skin components for prime contractors supporting US Navy NAVSUP Weapon Systems Support projects. The selected supplier is responsible for manufacturing or sourcing parts that strictly adhere to NSN 1RD 1560-01-723-6222 QF specifications. All deliverables must be packaged according to MIL-STD-2073 and marked in accordance with MIL-STD-129, with final delivery directed to shipping point W25G1U. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification. Additionally, all equipment used in the process must be calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413 and requires responses to be submitted by November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Supply of Attitude Indicators (NSN 6610-01-432-3229)This subcontract, issued by the Department of Defense through the Pa DLA Aviation At Philadelphia, involves the supply of Attitude Indicators under NSN 6610-01-432-3229 for NAVAIR aviation component projects. The selected provider is responsible for manufacturing or procuring units that strictly adhere to TDP Version 003, ensuring that all hardware, software, and firmware are fully aligned with the established equipment baseline. The contractor must ensure all units are marked according to MIL-STD-130 and packaged in compliance with MIL-STD-2073. To qualify, the provider must maintain ISO 9001 certification and demonstrate compliance with DFARS 252.204-7012. The final deliverable consists of the physical indicator units, fully marked and packaged for delivery.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Fuel Relief Valve Teardown and RepairThis subcontract with Navsup Weapon Systems Support involves the teardown, evaluation, repair, and modification of Fuel Relief Valves under NSN 7RH 2915-01-201-6004 EK. The scope of work includes conducting wear analysis, implementing approved repair procedures, and performing necessary environmental and quality conformance testing to deliver a fully certified, repaired valve for US Navy aviation projects. The contractor must maintain ISO 9001 or SAE AS9100 certification and utilize measuring and test equipment calibrated to NCSL Z540.3 or ISO 10012 standards. This opportunity falls under NAICS code 336413, with a response deadline set for November 19, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

Aviation Component Parts SupplierThis subcontract, managed by Navsup Weapon Systems Support under the Department of Defense, involves the supply of replacement parts, seals, and hardware for Air Pressure Regulators, specifically part number 166001039791. These components are intended for prime contractors working on Department of the Navy aviation projects. The supplier is required to provide OEM or approved equivalent aviation-grade seals and valves, ensuring all materials meet strict quality and origin standards. Key deliverables include the physical parts along with necessary quality certifications in compliance with Trade Agreements and hazardous materials modal regulations. The opportunity was posted on October 20, 2026, with a response deadline of November 20, 2026. The contract falls under NAICS code 336413, focusing on the specialized procurement of aviation component parts.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This contract, issued by the Navsup Weapon Systems Support under solicitation N0038323RA323, is for the procurement of 10 aircraft seats identified by NSN 7R-1680-014888413-KB with delivery terms set as FOB Origin. Due to the flight critical nature of the item and the specialized technical data and manufacturing knowledge required, the government requires engineering source approval from the design control activity to ensure part quality. Because the necessary technical data is not economically available to the government, only previously approved sources have been solicited. Any new offeror must submit comprehensive qualification data via the NAVSUP WSS Source Approval Information Brochures to be considered for award. Failure to provide the required source approval documentation or proof of a pending request will result in the proposal being excluded from consideration.

General Info

Agency

Department Of Defense → Navsup Weapon Systems Support

Contract Value

$579,780

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

PA, GBR

Set-Aside

NONE

Awardee

IPECO HOLDINGS LIMITED

Award Issued Date

07/30/2024, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedAug 15

Presolicitation

AwardedJul 30

Contract was awarded

Submission Closed

07/30/2024, 12:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Weapon Systems Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressPHILADELPHIA, PA, 19111-5098, USA

Contacts

Chad M. Fichter

contact@example.gov

+1 (555) 000-0000

Full Description

NSN 7R-1680-014888413-KB, TDP VER 001, QTY 10 EA, DELIVERY FOB ORIGIN. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs. The NAVSUP WSS Commercial Item Identification Brochure is now available at: "https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Bus iness-Opps/" Interested parties may obtain copies of Military and Federal Specificationsand Standards, Qualified Products Lists (QPLs), Qualified Product Databases(QPDs), Military Handbooks, and other standardized documents from the DoDSingle Stock Point (DODSSP) at Document Automation and Production Service(DAPS) in Philadelphia, PA. NOTE: Patterns, Drawings, Deviation Lists, Purchase Descriptions, etc. are NOT stocked at DODSSP. Most documents are available in Adobe PDF format from ASSIST-Online at: http://quicksearch.dla.mil/. Users may use ASSIST-Quick Search to search for and download available documents directly using standard browser software. Documents that are not available for downloading from ASSIST-Quick Search can be ordered from the DODSSP website using the ASSIST Shopping Wizard after obtaining a DODSSP Customer Account by following the registration procedures. Users who do not have access to the internet may contact the DODSSP ASSISTHelp Desk at 215-697-2667 or 215-697-2179 (DSN: 442-2667), or mail their request to DLADocument Services, Bldg. 4/D, 700 Robbins Avenue, Philadelphia PA 19111-5094. Award will be made only if the offeror, the product/service, or the manufacturer meets the qualification requirement(s) at time of award, in accordance with FAR clause 52.209-1. The solicitation identifies the office where additional information can be obtained concerning qualification requirements and is cited in each individual solicitation. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies or services. However, interested persons may identify tothe contracting officer their interest and capability to satisfy theGovernment's requirement with a commercial item within 15 days of this notice.