Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

17--FITTING,HOLD BACK,A

Open
N0038325RC335Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves the procurement of 278 units of a specific part identified as NSN 7R-1720-015334867-EY, TDP VER 011, with delivery FOB origin. The part is classified as flight critical and requires prior government source approval due to its unique design capabilities, engineering expertise, and manufacturing or repair knowledge held by the approved sources. These sources retain essential data rights and technical information that are not readily available to the government, making it necessary for any alternate sources to undergo a qualification process approved by the relevant government engineering authority before being eligible to supply the part. The contract emphasizes that only previously approved sources are solicited, and the approval process is time-consuming, often preventing delays in award decisions. Potential suppliers must submit detailed technical data and documentation demonstrating their capability to produce or repair the item, in accordance with NAVSUP WSS procedures. Failure to provide complete source approval information will result in disqualification from consideration. The government intends to negotiate solely with one source under FAR 6.302-1, but all responsible sources may express interest and submit capability statements within a specified response period. The procurement is managed by NAVSUP Weapon Systems Support in Philadelphia, PA, and interested parties can access relevant specifications, standards, and documentation through designated government sources. The solicitation also notes that the market research indicates the government is not applying FAR Part 12 policies for this acquisition, but interested commercial entities can demonstrate their capability to meet the requirements within 15 days of the notice.

General Info

Contract N0038325RC335 involves procurement for aircraft parts; responses due by April 14, 2025.

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfp
High

Read the document

Due in 2 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Due in 2 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

3 updates
PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

The notice description changed.

Type Changed

Solicitation → Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
CONTACT INFORMATION|4|N792.08|T2N|2159671143|Sign up to see this detail| ITEM UNIQUE IDENTIFICATION AND VALUATION (JAN 2023)|19|||||||||||||||||||| HIGHER-LEVEL CONTRACT QUALITY REQUIREMENT|8|x|||||||| TIME OF DELIVERY (JUNE 1997)|20||||||||||||||||||||| STOP-WORK ORDER (AUG 1989)|1|| WIDE AREA WORKFLOW PAYMENT INSTRUCTIONS (JAN 2023)|16|Invoice and Receiving Report (combo) Type||Cognizant DFAS|N00383|Cognizant DCMA|Cognizant DCMA|See Schedule|Source||||||||| NAVY USE OF ABILITYONE SUPPORT CONTRACTOR - RELEASE OF OFFEROR INFORMATION (3-18))|1|| VALUE ENGINEERING (JUN 2020)|3|||| EQUAL OPPORTUNITY (SEP 2016)|2||| INTEGRITY OF UNIT PRICES (NOV 2021)|1|| EQUAL OPPORTUITY FOR WORKERS WITH DISABILITIES (JUN 2020)|2||| TRANSPORTATION OF SUPPLIES BY SEA (OCT 2024)|2||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM-BASIC (FEB 2024)|11|||||||||||| LIMITATION OF LIABILITY--HIGH-VALUE ITEMS (FEB 1997)|1|| LIMITATIONS ON PASS-THROUGH CHARGES (JUN 2020)|1|| ALTERNATE A, ANNUAL REPRESENTATIONS AND CERTIFICATIONS (OCT 2024)|13|||||||||||||| BUY AMERICAN-FREE TRADE AGREEMENTS-BALANCE OF PAYMENTS PROGRAM CERTIFICATE-BASIC (FEB 2024))|5|||||| BUY AMERICAN--BALANCE OF PAYMENTS PROGRAM (FEB 2024)|1|| ROYALTY INFORMATION (APR 1984)|1|| ANNUAL REPRESENTATIONS AND CERTIFICATIONS (JAN 2025)|12|336413|1250||||||||||| FACSIMILE PROPOSALS (OCT 1997)|1|| NOTICE OF PRIORITY RATING FOR NATIONAL DEFENSE, EMERGENCY PREPAREDNESS, ANDENERGY PROGRAM USE (APR 2008))|2||x| This solicitation is for made new manufacture spare parts. This is a sole source requirement. The Government physically does not have in its possession sufficient, accurate, or legible data to contract with other than the current source. These items require Government Source Approval prior to award. If you are not an approved source, you must submit, together with your proposal, the information detailed in the NAVSUP WSS Source Approval Brochure which can be obtained on the internet at https://public.navsup.navy.mil/public/ops$public.business_vendor_form_new Offers received which fail to provide all data required by the source approval brochure will not be considered for award under this solicitation. For information or questions regarding this notice, please contact Alexis Healy at the email address: Sign up to see this detail. NAVSUP WSS Requests proposals submitted in response to this solicitation remain valid for a minimum of 120 days following submission. All contractual documents related to the instant procurement are considered to be "issued" by the Government when copies are either deposited in the mail, transmitted by facsimile, or sent by other electronic commerce email. The Government's acceptance of the contractor's proposal constitutes bilateral agreement to "issue" contractual documents as detailed herein. \ 1. SCOPE 1.1 . Markings shall be in accordance with MIL-STD-130. 1.2 PRE-AWARD / POST AWARD REQUIREMENTS: Due to the critical use of this item and its quality history, a pre-award survey and post-award conference may be required for all new manufacturers. For all previous sources, a post-award conference may be recommended. 1.3 The components being acquired under this solicitation have been classified as Flight Critical requiring engineering source approval by the Naval Air Systems Command. Only those companies who have submitted requests for source approval and been approved will be eligible for award under this solicitation. Any company not previously approved may submit a Source Approval Request to the contracting officer, Naval Inventory Control Point, (See Block 10 of the SF33 for name and code). The Source Approval Request shall contain the following documentation and shall be submitted by the closing date of this solicitation: (A) Copy of complete configuration drawings for a similar item(s) which your company has produced within the past three years, including test procedures for which your company (1) has been qualified to manufacture and (2) which is similar, i.e., requires the same materials, manufacturing processes, inspections, tolerances and similar application as the item(s) for which you are seeking approval. (B) Copy of the complete process/operation sheets used to manufacuture the similar item, including but not limited to, detailed shop sketches. These plans must note those operations and processes performed by subcontractors/ vendors. (C) Complete copies of purchase orders, shipping documents, etc. that document delivery of production quantities of the part to the Original Equipment Manufacturer or Military service. Provide the most recent copies of the documents. (D) A detailed comparative analysis of the differences/similarities between the similar part and the part(s) for which you are seeking approval. This analysis should include materials, configuration, tolerances, process requirements, dimensions, castings, forgings, etc. (E) Copy of inspection method sheets used in the manufacturing and at final inspection. These sheets should include actual tolerance, print requirements, inspection devices, sources performing the operation and level of inspection. Critical characteristics should be discernible from all other characteristics. The above requirements are a subset of requirements specified in the ASO Source Approval Information Brochure dated January 1995. The submission of this data subset is contingent upon and in consideration of the submitting contractor meeting all other requirements specified in this solicitation to include a bilateral agreement with MDA which includes availability of complete data, MRB disposition, etc. Any company not having such agreement, but desiring to seek engineering source approval, will be required to submit data meeting all requirements of the ASO/NAVICP Source Approval Brochure. 1.4 Sampling rates (AQLs) indicated below shall be used in accordance with ANSI Z1.4 for Single Sampling and a General Inspection Level of II. 1.5 In addition to the 100% PCO Mandatory, critical and major characteristics, attributes for plating, hardness and non-destructive testing will be inspected one hundred percent. 1.6 Contractor shall develop a system for identification of individual piece parts for traceability purposes. Markings shall not be permanent. 1.7 An AQL of 1.5 will be used for Class 3 threads and dimensions, and geometric feature controls with a tolerance range of .010 or less. 1.8 For minor characteristics, a sampling rate determined by the contractor and subject to QAR approval will be used. 1.9 The material covered in this contract/purchase order will be used in a crucial shipboard system enabling the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems or loss of aircraft. Therefore,the material has been designated as Critical material and special control procedures are invoked to ensure receipt of correct material. 1.10 Articles to be furnished hereunder shall be manufactured, tested and inspected in accordance with ;NAWC LAKEHURST; drawing number ( ;97415; ) ;2-7938-5; , Revision ;H; and all details and specifications referenced therein. 1.11 Unless expressly provided for elsewhere in this clause, equipment such as fixtures, jigs, dies, patterns, mylars, special tooling, test equipment, or any other manufacturing aid required for the manufacture and/or testing of the subject item(s) will not be provided by the Government or any other source and is the sole responsibility of the contractor. The foregoing applies notwithstanding any reference to such equipment or the furnishing thereof that may be contained in any drawing or referenced specification. 1.12 If MIL-STD-454 is referenced in the drawings or in the specification, the contractor is expected to show compliance with IPC/EIAJ-STD-001C. 2. APPLICABLE DOCUMENTS DRAWING DATA=MPR 520 |80020| -| |D| | | | DRAWING DATA=PL-2-7938 |97415| T| |D| | | | DRAWING DATA=2-7938 |97415| H| |D| | | | DRAWING DATA=7-0508-3 |97415| C| |D| | | | DRAWING DATA=7-0517-2 |97415| L| |D| | | | DRAWING DATA=7-0518-2 |97415| H| |D| | | | DRAWING DATA=7-0522-2 |97415| M| |D| | | | DRAWING DATA=7-0529-3 |97415| H| |D| | | | DRAWING DATA=7-0533-3 |97415| M| |D| | | | DRAWING DATA=7-0545-2 |97415| G| |D| | | | DRAWING DATA=7-0620-3 |97415| G| |D| | | | DRAWING DATA=7-0621-1 |97415| H| |D| | | | DRAWING DATA=7-0622-2 |97415| G| |D| | | | DRAWING DATA=7-0623-2 |97415| G| |D| | | | DRAWING DATA=7-1668-3 |97415| H| |D| | | | 3. REQUIREMENTS - NOT APPLICABLE 4. QUALITY ASSURANCE Unique Requirements: 1. SEE OFFICAL REMARKS. 2. Interim Inspection Requirements: N/A 3. ALRE CSI parts require certification. a. When certified, an ALRE part is marked with a Material Identification Code (MIC). NAWCADLKE QA will provide the MIC to DCMA if the component is source accepted, and after receipt of all associated data. Application of MIC shall be in the same methodology as the drawing note for part marking, and in same area as part marking (next to, above, or below). 4. Receipt inspection and Certification of Sub-Components: a. The following parts shall be certified at Lakehurst. As explained in the "Data to Substantiate Receipt Inspection and Certification of Subcomponents" CDRL below, any data requested for a specific part that is cited in that CDRL shall be included with the part that is shipped to Lakehurst. Upon completion of certification, each part will be shipped back to the contractor for final assembly, for performance of the inspections detailed in section N.5 below, and for final acceptance. i. P/N 7-1668-3. ii. P/N 7-0508-3. iii. P/N 7-0517-2. iv. P/N 7-0518-2. v. P/N 7-0522-2. vi. P/N 7-0529-3. vii. P/N 7-0533-3. viii. P/N 7-0545-2. ix. P/N 7-0621-1. x. P/N 7-0622-2. xi. P/N 7-0623-2. 5. Receipt Inspection and Certification of the Top Assembly: The receipt Inspection and Certification of the Top Assembly, P/N 2-7938-5, shall occur during the final inspection. The following inspections shall be performed at that time with DCMA oversite: a. P/N 2-7938-5; Repeatable Release Holdback Bar, F/A-18 E/F (CSI): i. Witness of final settings per ATP 4-7938. Note 11 of Parts List PL-2-7938 refers. ii. Witness of proof pressure test per ATP 4-7936. iii. Witness of release tests cited in para 6.4 of ATP 4-7938. iv. Verification of assembly and torque per Note 15 of Parts List PL-2-7938. v. Witness of dimensional alignment settings per Notes 17, 18, and 19 of Parts List PL-2-7938. 6. Contractor Assist and Part Marking: a. The contractor shall assist on the conduct of the inspections (both final and interim) required that are necessary to certify the critical items specified herein. The contractor shall provide adequate facilities, inspection equipment, and skilled personnel, to support the NAWCADLKE Inspector in the conduct of the interim inspection(s). The contractor shall provide gauges, tools, fixtures, and jigs necessary to perform the inspections. The contractor shall also provide sufficient rigging/material handling services and manpower to setup/configure/operate equipment & machines used to accomplish the inspection task. This contractor assist requirement shall be applicable to 100% of the production quantities. As part of the MRI process, the NAWCADLKE QA representative will provide, in writing, a certification number along with direction for marking the Critical Safety Items (CSI). 7. Delivery Schedule: a. P/N 7-1668-3. This part shall be delivered at a maximum rate of 5 units per month. b. P/N 7-0508-3. This part shall be delivered at a maximum rate of 10 units per month. c. P/N 7-0517-2. This part shall be delivered at a maximum rate of 10 units per month. d. P/N 7-0518-2. This part shall be delivered at a maximum rate of 10 units per month. e. P/N 7-0522-2. This part shall be delivered at a maximum rate of 10 units per month. f. P/N 7-0529-3. This part shall be delivered at a maximum rate of 5 units per month. g. P/N 7-0533-3. This part shall be delivered at a maximum rate of 10 units per month. h. P/N 7-0545-2. This part shall be delivered at a maximum rate of 10 units per month. i. P/N 7-0621-1. This part shall be delivered at a maximum rate of 10 units per month. j. P/N 7-0622-2. This part shall be delivered at a maximum rate of 30 units per month. k. P/N 7-0623-2. This part shall be delivered at a maximum rate of 30 units per month. 8. Turn Around Time: a. For purposes of planning, the estimated time for the items listed in section N.7 is 30 days after the date of receipt. QUALITY ASSURANCE REQUIREMENTS 1. The solicitation/contract shall contain the NAWCADLKE inspection surveillance clause as follows: a. N/A b. N/A 2. The contractor shall perform Quality Conformance and Lot Sampling Inspection for all associated features that are present in the drawings and specifications: a. Features/attributes/requirements classified as Critical and Major on the drawing(s) or within the technical specification shall be inspected and shall have the actual dimensions documented 100%; b. Attributes for plating, hardness, and non-destructive testing shall be inspected 100%; c. Class 3 Threads, dimensions, and geometric feature controls with a tolerance range of .010 or less shall be inspected using an AQL of 1.5 and the General Inspection Level II as defined by ANSI Z1.4. d. Minor Characteristics: Sampling shall be inspected using an AQL of 4.0 and the General Inspection Level II as defined by ANSI Z1.4. 3. The material covered in this contract/purchase order will be used in a crucial shipboard system supporting the launch and/or recovery of aircraft. The use of incorrect or defective material would create a high probability of failure resulting in a serious personnel injury, loss of life, loss of vital shipboard systems, or loss of aircraft. Therefore, the material has been designated as Critical Safety Item (CSI) material and special control procedures are invoked to ensure receipt of correct material. 4. First Article Testing: N/A 5. Production Lot Special Tests: N/A 6. For purposes of this TDR, the term NDT shall refer to the following methods: MT - Magnetic Particle Testing, PT - Penetrant Inspection, UT - Ultrasonic Testing, RT - Radiographic Testing, and VT - Visual Testing. 7. Companies performing NDT shall be NADCAP accredited, or a laboratory accredited by one of the organizations listed below as satisfying ISO 17025 (General requirements for the competence of testing and calibration laboratories). NDT certificates shall be bear the symbols of accreditation and the accreditation body a. American Association for Laboratory Accreditation (A2LA) b. ANSI National Accreditation Board (ANAB) c. International Accreditation Service, Inc. (IAS) d. National Voluntary Laboratory Accreditation Program (NVLAP) e. Perry Johnson Laboratory Accreditation, Inc. (PJLA) f. Canadian Association for Laboratory Accreditation Inc. (CALA) g. Standards Council of Canada (SCC) 4.1 Review documentation as provided under DD 1423 requirements. 4.2 CRITICAL MANUFACTURING PROCESSES ( ;APPLIES; ) HEAT TREAT ( ; ; ) WELDING ( ;APPLIES; ) CADMIUM PLATING ( ;APPLIES; ) ENGINEERING CHROME PLATING ( ; ; ) NICKEL CHROME PLATING ( ;APPLIES; ) CASTING(S) ( ; ; ) FORGING(S) ( ;APPLIES; ) MPR (MATERIAL PROCESSING REQUIREMENTS) 4.3 . Mandatory Inspection Requirements: 100% Procurement Contracting Officer (PCO) mandatory inspection is required and shall be accomplished at source under the surveillance and final approval of the cognizant DCMAO Quality Assurance Representative (QAR). During production, mandatory inspection is required to be accomplished by the contractor as follows: A. Level of Inspection (LOI). 1. Critical characteristics: 100% inspection shall apply. 2. Major and Minor characteristics: LOI shall be in accordance with a sampling plan acceptable to the QAR. B. Critical characteristics: ;JOSE TORRACA NAWCADLKE QA REP / Tel: (732)-323-4265 E-mail: Sign up to see this detail; C. Major and Minor characteristics 1. Shall be defined by the contractor subject to QAR concurrence, unless defined on applicable drawings and associated specifications. 4.4 SPECIAL INSPECTION REQUIREMENTS ( ;APPLIES; ) MAGNETIC PARTICLE INSPECTION ( ;APPLIES; ) SURFACE INSPECTION ( ;APPLIES; ) PENETRANT INSPECTION ( ; ; ) RADIOGRAPHIC INSPECTION ( ; ; ) ULTRSONIC INSPECTION ( ; ; ) HIGH SHOCK TEST ( ; ; ) MECHANICAL VIBRATION TEST 4.5 FINAL INSPECTION REQUIREMENT:Due to the critical nature of this item, representatives of the buying office/and the cognizant field activity, NAWC Lakehurst, shall be notified by the successful contractor at least 14 days prior to presentation to the DCM QAR of the items for final inspection so that they may have the option of witnessing the final inspection. The contractor shall notify by email or TELEFAX PCO and NAWC Lakehurst QA ;JOSE TORRACA NAWCADLKE QA REP / Tel: (732)-323-4265 E-mail: Sign up to see this detail; to arrange for the final inspection.The authority of the QAR shall not be abrogated. If the notification is not given to both sites then the QAR shall not accept the units. 5. PACKAGING- MIL-STD 2073 PACKAGING APPLIES AS FOUND ELSEWHERE IN THE SCHEDULE 6. NOTES - NOT APPLICABLE THIS IS AN ALRE CRITICAL SAFETY ITEM. FOR DRAWING UPDATES, SEE ATTACHED NAWC LKE DRAWING UPDATE SHEET. NAVSUP REFERENCE ONLY: PROCUREMENT TDR (25-10055): REPAIR TDR (25-10056): THE COMPONENTS BEING ACQUIRED UNDER THIS SOLICITATION HAVE BEEN CLASSIFIED AS "CRITICAL" REQUIRING ENGINEERING SOURCE APPROVAL BY NAVAL AIR SYSTEMS COMMAND ONLY THOSE COMPANIES WHO HAVE SUBMITTED AND BEEN APPROVED WILL BE ELIGIBLE FORAWARD UNDER THIS SOLICITATION. ANY COMPANY MAY SUBMIT A SOURCE APPROVAL REQUEST AS OUTLINED IN THIS SOLICITATION. All records pertaining to ALRE CSI/CAI manufacture and inspection/test shall be provided to the ALRE Cognizant Technical Authority. All records shall be maintained by LKE QA and by the manufacturer for a period of seven years. NOTE THE FOLLOWING STATEMENT IS ONLY APPLICABLE TO REPAIR CONTRACTS TDR 25-10056 APPLIES ONLY FOR OVERHAUL OF 2-7938-5 REPEATABLE RELEASEHOLDBACK BAR. AN OVERHAUL PROCEDURE COVERING DISASSEMBLY, INSPECTION, REPAIR, ASSEMBLY, TESTING, AND QUALITY ASSURANCE RECORD KEEPING AND REPORTING IS REQUIRED TO BE SUBMITTED BY THE OVERHAUL ACTIVITY FOR REVIEW AND APPROVAL BY NAWCAD LAKEHURST ENGINEERING CODE BL 14300 VIA REQUEST FOR ENGINEERING INFORMATION (REI) PRIOR TO ANY WORK PERFORMED. NO DEVIATION FROM THE APPROVED PROCEDURE IS PERMISSIBLE WITHOUT APPROVAL FROM NAWCAD LKE ENGINEERING CODE BL 14300. ______________________________________________________________________________ DATE OF FIRST SUBMISSION=ASREQ 16. REMARKS: (BLOCK 3) SUBTITLE: DATA TO SUBSTANTIATE RECEIPT INSPECTION AND CERTIFICATION OF SUB-COMPONENTS. (BLOCK 12) DATE OF FIRST SUBMISSION: CONCURRENTLY WITH PART DELIVERY TO NAVAIR LAKEHURST FOR RECEIPT AND CERTIFICATION OF SUB-COMPONENTS. Data Requirements: a. Copies of all approved Request for Deviations, Request for Wavers and all approved MRB actions. b. Chrome plate per Drawings 7-1668, 7-0508, 7-0522, 7-0529, and 7-0621. c. Cadmium plate per Drawings 7-1668, 7-0508, 7-0522, 7-0529, and 7-0545. d. Shot peen per Drawings 7-1668, 7-0508, 7-0522, 7-0529, 7-0545, and 7-0621. e. Hardness test per Drawings 7-0517, 7-0622, and 7-0623. f. Stress relief per Drawings 7-1668, 7-0508, 7-0518, 7-0545, 7-0517, and 7-0621. g. Magnetic particle inspection per Drawings 7-1668, 7-0508, 7-0517, 7-0518, 7-0522, 7-0529, 7-0533, 7-0545, 7-0621, 7-0622, and 7-0623. h. Heat treat per Drawings 7-1668, 7-0508, 7-0518, 7-0522, 7-0529, 7-0545, and 7-0621. i. Dimensional inspection per Drawings 7-1668, 7-0508, 7-0517, 7-0518, 7-0522, 7-0529, 7-0533, 7-0545, 7-0621, 7-0622, and 7-0623. j. Material certification per Drawings 7-1668, 7-0508, 7-0517, 7-0518, 7-0522, 7-0529, 7-0533, 7-0545, 7-0621, 7-0622, and 7-0623. k. Carburize IAW MPR 520 per Drawings 7-0517, 7-0533, 7-0622, and 7-0623. l. Glass bead peen per Drawing 7-0529. m. Temper etch inspection per Drawings 7-1668, 7-0508, and 7-0545. n. Dry film lubricant per Drawing 7-1668. o. Passivation per Drawing 7-0517 and 7-0533. p. All certifications, copies of any CMM printouts, test reports, and in-process inspection documents needed to substantiate product quality for P/Ns: P/N 7-1668-3, P/N 7-0508-3, P/N 7-0517-2, P/N 7-0518-2, P/N 7-0522-2, P/N 7-0529-3, P/N 7-0533-3, P/N 7-0545-2, P/N 7-0621-1, P/N 7-0622-2, and P/N 7-0623-2. q. Results of Heat treat samples IAW MPR 520 for P/Ns 7-0517-2, 7-0533-3, 7-0622-2, and 7-0623-2. DATE OF FIRST SUBMISSION=ASREQ 16. REMARKS: (BLOCK 3) SUBTITLE: DATA TO SUBSTANTIATE RECEIPT INSPECTION AND CERTIFICATION OF TOP ASSEMBLY (BLOCK 12) DATE OF FIRST SUBMISSION: CONCURRENTLY WITH FINAL INSPECTION. Data Requirements: a. Copies of all approved Request for Deviations, Request for Wavers and all approved MRB actions. b. Functional test IAW ATP 4-7938. c. Final settings IAW ATP 4-7938. d. Torque settings per Parts List (PL) 2-7938 and Drawing 7-0530. e. Dimensional/alignment settings per PL 2-7938. f. Chrome plate per Drawings 7-1668, 7-0508, 7-0522, 7-0529, 7-0620, and 7-0621. g. Cadmium plate per Drawings 7-1668, 7-0508, 7-0522, 7-0529, 7-0545, and 7-0546. h. Shot peen per Drawings 7-1668, 7-0508, 7-0522, 7-0529, 7-0545, and 7-0621. i. Hardness test per Drawings 7-0622, and 7-0623. j. Stress relief per Drawings 7-1668, 7-0508, 7-0518, 7-0538, 7-0545, and 7-0621. k. Magnetic particle inspection per Drawings 7-0508, 7-0514, 7-0518, 7-0522, 7-0528, 7-0529, 7-0530, 7-0533, 7-0538, 7-0539, 7-0545, 7-0620, 7-0621, 7-0622, 7-0623, and 7-2334. l. Heat treat per Drawings 7-1668, 7-0508, 7-0514, 7-0518, 7-0522, 7-0523, 7-0528, 7-0529, 7-0530, 7-0538, 7-0539, 7-0540, 7-0541, 7-0545, 7-0546, 7-0547, 7-0620, 7-0621, and 7-2334. m. Dimensional inspection per Drawings 7-1668, 7-0508, 7-0509, 7-0511, 7-0514, 7-0517, 7-0518, 7-0519, 7-0520, 7-0521, 7-0522, 7-0523, 7-0524, 7-0525, 7-0526, 7-0527, 7-0528, 7-0529, 7-0530, 7-0533, 7-0535, 7-0538, 7-0539, 7-0540, 7-0541, 7-0542, 7-0543, 7-0544, 7-0545, 7-0546, 7-0547, 7-0548, 7-0581, 7-0620, 7-0621, 7-0622, 7-0623, 7-0629, 6-0140, 6-0141, 6-0251, 6-0252, 7-2334, and 7-2723. n. Material certification per Drawings 7-1668, 7-0508, 7-0509, 7-0511, 7-0514, 7-0517, 7-0518, 7-0519, 7-0520, 7-0521, 7-0522, 7-0523, 7-0524, 7-0525, 7-0526, 7-0527, 7-0528, 7-0529, 7-0530, 7-0533, 7-0535, 7-0538, 7-0539, 7-0540, 7-0541, 7-0542, 7-0543, 7-0544, 7-0545, 7-0546, 7-0547, 7-0548, 7-0581, 7-0620, 7-0621, 7-0622, 7-0623, 7-0629, 6-0140, 6-0141, 6-0251, 6-0252, 7-2334, and 7-2723. o. Passivate per Drawings 7-0511, 7-0519, 7-0520, 7-0521, 7-0523, 7-0524, 7-0525, 7-0527,7-0528, 7-0530, 7-0535, 7-0539, 7-0540, 7-0541, 7-0543, 7-0546,7-0548, and 7-2334. p. Penetrant inspection per Drawings 7-0523, 7-0526, 7-0540, 7-0541, 7-0542, 7-0546, and 7-0581. q. Anodize per Drawings 7-0629, and 7-2723. r. Sand Blast per Drawing 7-0540. s. Glass bead blast per Drawing 7-0546. t. Glass bead peen per Drawing 7-0529. u. Paint per PL 2-7938; and Drawings 7-1668, 7-0508, 7-0529, 7-0530, 7-0539, 7-0629, 7-2334, and 7-2723. v. Temper etch inspection per Drawings 7-1668, 7-0508, and 7-0545. w. Dry film lubricant per Drawing 7-1668. x. Lubricant per Drawing 2-7938. y. Sealant per Drawing 2-7938. z. Carburize IAW MPR 520 per Drawings 7-0517, 7-0533, 7-0622, and 7-0623. aa. Urethane casting per Drawing 7-0539. DATE OF FIRST SUBMISSION=030 DAC 16. REMARKS: Manufacturing Plan only need to be submitted if different than Manufacturing Plans listed below: 1. Load Release Sleeve (P/N 7-0518-2), Triumph Plan dated 24 SEP 2019 (via C-ECR 20E0051). 2. Collet Head (P/N 7-1668-3), Triumph Plan dated 30 AUG 2023 (via C-ECR 23E0309). 3. Collet Collar (P/N 7-0508-3), Triumph Plan dated 16 JAN 2015 (via C-ECR 15E0095). 4. Lock Ring Seat (P/N 7-0517-2), Triumph Plan dated 20 JAN 2021 (via C-ECR 21E0017). 5.Cylinder (P/N 7-0522-2), Triumph Plan dated 04 FEB 2015 (via C-ECR 15E0058) 6. Strain Bar (P/N 7-0529-3), Triumph Plan dated 07 OCT 2022 (via C-ECR 22E0377). 7. Load Transfer Sleeve (P/N 7-0533-3), Triumph Plan dated 13 OCT 2016 (via C-ECR 16E0249). 8. Rod End Connector (P/N 7-0545-2), Triumph Plan dated 31 AUG 2022 (via C-ECR 22E0254). 9. Thrust Bearing (P/N 7-0621-1), Triumph Plan dated 27 OCT 2023 (via C-ECR 23E0340). 10. Primary Lock Segment (P/N 7-0622-2), Triumph Plan dated 15 AUG 2023 (via C-ECR 23E0350). 11. Secondary Lock Segment (P/N 7-0623-2), Triumph Plan dated 26 AUG 2023 (via C-ECR 23E0335). NOTE: Revisions to any of the eleven manufacturing processes listed above must be approved by NAWCADLKE code BL14300 through an Engineering Change Request. Tailor DI-MISC-80074 as follows: a. Delete 10.2.1.3 b. Delete 10.2.2.3.1 c. Delete 10.2.3.2 d. Delete 10.2.3.6 e. Delete 10.2.3.7.2 f. Delete 10.2.3.7.3 g. Delete 10.2.3.7.4 h. Delete 10.2.3.7.5 i. Delete 10.2.6 The manufacturing plan shall as a minimum include the following: a. Documentation of all required manufacturing processes. b. All required equipment c. All manufacturing process sheets. d. Identify all subcontractor manufacturing processes and associated subcontractor. e. Provide any necessary personnel certification. f. Plan shall be submitted for P/Ns 7-0518-2, 7-1668-3, 7-0508-3, 7-0517-2, 7-0522-2, 7-0529-3, 7-0533-3, 7-0545-2, 7-0621-1, 7-0622-2, & 7-0623-2. DATE OF FIRST SUBMISSION=030 DAC 16. REMARKS Material Review Board Procedure (MRB) that describes a process for the review of minor non-conformances per MIL-STD-1520C except that the provisions for Government participation and approval as specified in section 4.7 shall be executed concurrently with the Contractor's review and disposition process stated in para 4.5.1. Government participation shall include NAVAIR In-Service Engineering Code BL14300 and the DCMA Quality Assurance Representative. NAVAIR participation shall be in the concurrent review and subsequent approval/disapproval of submitted minor non-conformances whereby, as part of their MRB process, the contractor will submit their requests to NAWCADLKE via email to the following email address: Sign up to see this detail

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
Federal
MH-65 SPARE PARTS
Solicitation # 70Z03827QB0000010
Solicitation 70Z03827QB0000010 is a request for quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new manufactured commercial spare parts for the MH-65 helicopter, specifically the MGB Tach Bush (NSN 01HS31976). The requirement is intended as a sole source acquisition from Airbus Helicopters, Inc., as they are identified as the only source capable of providing genuine Original Equipment Manufacturer parts with the necessary traceability. The initial order is for 10 units, with a tailored option for the government to unilaterally increase the quantity by up to 20 additional units, for a maximum of 30, by December 31, 2026. Due to vendor requests, the offer due date has been extended to November 16, 2026, at 2:00 PM EST. To ensure aircrew safety and flight quality, the government mandates that all parts be new, FAA-approved, and accompanied by a Certificate of Conformance and a complete, auditable paper trail tracing ownership back to the OEM, Airbus Helicopters France. No substitute or alternate parts will be accepted. Award will be based on a determination of fair and reasonable pricing and technical acceptability. Deliveries are designated as F.o.B. Destination to the Aviation Logistics Center, with strict packaging requirements prohibiting materials such as Styrofoam and peanut packaging to prevent damage and corrosion during storage. Offerors must hold their quoted prices firm for 60 calendar days.
Aviation Logistics Center (ALC)(00038)

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
Hill Industry Day Opportunities
Solicitation # Hill_Industry_Day_Opportunties
The Hill Industry Day Opportunities is a sources-sought solicitation issued by the Department of Defense, specifically the F3YCCF 448 Scmw, with a response deadline of December 4, 2026. This initiative focuses on market research and procurement opportunities for a wide array of aircraft and space components under NAICS code 336413. The scope of work spans multiple locations, including Hill, Tinker, and Robins Air Force Bases, and covers requirements for aircraft such as the A-10C, B-1, B-2, B-52H, and T-38. The government is seeking vendors for new buy and repair services, reverse engineering of components like mechanical actuators and fuel pressurizing valves, and general market research for items including optical prisms, hydraulic filters, and motor controllers. Interested vendors are required to submit capabilities statements or Source Approval Request packages to the designated point of contact. For SAR packages, vendors must specifically request a drop-off via email to receive submission instructions. The procurement includes forecasted requirements extending from fiscal year 2027 through 2031, with deliverables ranging from prototypes and 3D modeling data to complete technical data packages. While total contract value is not specified, the solicitation provides detailed NSNs, forecasted pricing, and technical specifications for various line items to facilitate vendor identification and capability assessment.
F3YCCF 448 Scmw

POSTED

about 3 hours ago

DEADLINE

in 17 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

NAICS: 334511
New
Federal
58--RECEIVER-TRANSMITTE, IN REPAIR/MODIFICATION OF
Solicitation # N0038325RA354
This contract involves the procurement of 16 units of a specific part designated as NSN 7R-5841-014789871-GF, TDP VER 001, to be delivered FOB origin. The part is classified as flight critical and requires prior government approval of the source due to its unique design capabilities, engineering expertise, and manufacturing or repair knowledge held by the approved source(s). These sources possess proprietary data rights and technical data essential for maintaining the part’s quality, which are not readily available to the government or other suppliers. Consequently, any alternate source must undergo a qualification process approved by the designated government engineering authority, and only previously approved sources are eligible to bid. The contract emphasizes that the approval process for new sources is typically lengthy, so the government intends to proceed with existing approved sources to meet operational needs without delay. The solicitation specifies that offers must include detailed technical data and documentation as outlined in the NAVSUP Source Approval Brochures, with submissions evaluated on their completeness and compliance. The government intends to negotiate solely with the identified approved sources under FAR 6.302-1, and this notice does not constitute a competitive solicitation. Interested parties are invited to express their interest and capability within 45 days of the notice, and additional technical and standardization documents can be obtained through designated government sources such as DODSSP and ASSIST-Online. The primary point of contact for inquiries is Chad M. Fichter at NAVSUP Weapon Systems Support in Philadelphia.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

in about 3 hours
View Details
NAICS: 335931
New
Federal
61--POWER SUPPLY, IN REPAIR/MODIFICATION OF
Solicitation # N0038325QD178
The contract concerns the procurement of six units of a flight-critical power supply component, listed as NSN 7R-6130-016707186-GF, under the solicitation number N0038325QD178 for the Department of the Navy’s NAVSUP Weapon Systems Support office in Philadelphia, PA. Delivery terms are specified as FOB origin, indicating the supplier will be responsible for the product only until it leaves their facility. Due to the nature of the item being flight critical and technical data limitations, only sources that have been previously approved by the Government are eligible to submit proposals, and the time required for a new source approval is typically too lengthy to accommodate current operational needs. Potential contractors who are not already approved sources must provide detailed source approval information as outlined in the NAVSUP WSS Source Approval Information Brochures for either spares or repairs, and must demonstrate experience in producing the item or similar products. All requisite documentation or evidence of prior submission must be included with proposals, or the offer will not be considered. The Government emphasizes that the award process will not be delayed to evaluate new source requests if it would prevent meeting Fleet support requirements. The point of contact for this solicitation is Svitlana Shvets, and further details, including the commercial item identification brochure, are accessible through the NAVSUP Weapon Systems Support online portal. The deadline for responses is November 10, 2025.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 28 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS