Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on May 6, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

18 PUMM Explosives Mixer

Closed
W519TC-25-Q-1224Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248
New
Federal
Electrically Heated Tank
Solicitation # W911S227U0049
Solicitation W911S227U0049 is a Request for Quotation issued by the US Army ATEC for the procurement of new electrically heated tanks and temperature controllers for the U.S. Army Yuma Proving Ground. The primary requirement consists of a 50-gallon electrically heated cylindrical tank with a 40-gallon working capacity, 10 kW heating, and a Type B agitator powered by a 1.5 horsepower motor, designed to heat and melt paraffin wax to 250 degrees Fahrenheit. The government accepts the STA-RW brand (Part Numbers Y50MB, C4X) or an equal product that meets the specified physical and functional characteristics. This is a Total Small Business Set-Aside, and the contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. All quotes must be submitted electronically via the PIEE solicitation module by the specified deadline, and failure to include the mandatory Attachment 1 regarding certifications and country of origin may result in a non-responsive rejection. Delivery is required on an F.O.B. destination basis to the Yuma Proving Ground in Arizona, with a preferred delivery timeframe of 30 days. Offerors providing equal products must include descriptive literature, make or model numbers, and details of any modifications. The procurement is subject to various federal regulations, including the Buy American Act and NEMA 12 enclosure standards for motor starters. Acceptance will be based on visual inspection, dimensional measurements, and manufacturing quality upon delivery.
W6QM Micc-Ft Drum

POSTED

1 day ago

DEADLINE

in 9 days
NAICS: 333248
New
DIBBS
39--WINCH POWER HOIST UNIT
Solicitation # SPE8EE-27-Q-0033
Solicitation SPE8EE-27-Q-0033 is a Request for Quotation issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of two Window Power Hoist Units (NSN 3950-99-989-1264). This is a total small business set-aside under NAICS code 333248. The required delivery date for the items is December 8, 2026, with a delivery timeframe of 176 days after the award. Delivery is designated as FOB Origin under the First Destination Transportation program, with the shipment destined for DLA Distribution in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The procurement requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific compliance with RP001 for palletization. Offerors must maintain active registration in the System for Award Management and provide a complete data package if proposing alternate products. Payment and invoicing must be processed electronically through the Wide Area Workflow system. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American and Balance of Payments program compliance, and prohibitions on certain telecommunications equipment. Quotes must be submitted electronically by the deadline of October 26, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 6 days
NAICS: 333248
New
Federal
Industrial Sewing Machines
Solicitation # W911S227U0036
Solicitation W911S227U0036 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new industrial sewing machines. This acquisition is designated as a Total Small Business Set-Aside under NAICS code 333248. The primary requirement is for a JUKI Post Bed Sewing machine, part number PLC2710VS70BBZ/SC952, though the solicitation is posted as brand name or equal. To be considered, equal products must meet specific technical performance standards, including a needle bar stroke of 30.7mm to 40mm and maximum sewing speeds ranging from 2,500 to 5,000 sti/min, depending on the model. All equipment must be new, compatible with JUKI replacement parts, run on single pole 120V, and be delivered as a turnkey solution. The contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is preferred within 30 days on an F.O.B. destination basis. Offerors must submit their quotes through the PIEE Solicitation module and include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. Payment will be processed via Wide Area Workflow. Key regulatory requirements include compliance with the Buy American Act, sustainable product standards, and postaward small business program rerepresentation.
W6QM Micc-Ft Drum

POSTED

6 days ago

DEADLINE

in about 15 hours
NAICS: 333248
DIBBS
CABLE ROLLER ASSEMB
Solicitation # SPE8EE-27-T-0136
Solicitation SPE8EE-27-T-0136 is issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of eight cable roller assemblies, identified by NSN 3950-01-573-8098. The requirement is categorized under NAICS code 333248. Delivery is required within 20 days after receipt of order, with the place of performance and delivery located in Silverdale, Washington. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and a prohibition on the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Compliance with various Federal Acquisition Regulations and Defense Federal Acquisition Regulation Supplement clauses is required, including the Buy American Act, the Berry Amendment, and safeguarding covered defense information. Offerors must submit quotations via the DIBBS portal by October 26, 2026. The award may be processed as an automated award, and the government requires representations regarding small business size status and telecommunications equipment usage.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

7 days ago

DEADLINE

in 6 days

General Info

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

McAlester, OK, 74501, USA

Set-Aside

NONE

Documents

1

B08+Synopsis+Solicitation+W519TC-25-Q-1224.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Ri
Contacts2 people available
OfficeROCK ISLAND, IL, 61299-0000, USA
Office AddressROCK ISLAND, IL, 61299-0000, USA

Full Description

Show more
Solicitation: W519TC-25-Q-1224 Agency: Army Contracting Command - Rock Island (ACC-RI) Title: B&P Littleford, LLC 18 PUMM Vertical Mixer Assembly The Army Contracting Command - Rock Island (ACC-RI) hereby issues a combined synopsis/solicitation Request for Quote (RFQ) W519TC-25-Q-1224 restricted to B&P Littleford pursuant to the authority of 41 U.S.C. 1901 for the procurement of the following: CLIN 0001: 3 (three) - 600 gallon B&P Littleford Model 18 PUMM Vertical Mixer Assembly Description: This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested, and a formal, written solicitation will NOT be issued. The NAICS codes is 333248; the business size standard is 750 employees. Contractors providing quotations must be registered within the System of Award Management (SAM) database to receive an award. The website for SAM is https://www.sam.gov/. Contractors must also have current, acceptable data in the Federal Awardee Performance and Integrity Information System (FAPIIS). Description of Requirement: This solicitation is issued for the following items: McAlester Army Ammunition Plant (MCAAP) has a requirement for three (3) Explosive Mixer Assemblies. This requirement is for B&P Littleford, LLC 18 PUMM Explosive Mixer Assemblies as listed in the CLIN above. The mixer is needed to replace units at MCAAP. The Government will install and start-up the unit after it is delivered. Type of Acquisition and Contract: This acquisition is issued as a sole source to B&P Littleford. The Army Contracting Command-Rock Island (ACC-RI) intends to award a Firm-Fixed-Price Contract. Delivery and Location: The delivery date is 30 April 2026 Early delivery is allowed but must be coordinated with the contracting office. Delivery shall be FOB Destination To: McAlester Army Ammunition Plant 1 C Tree Road McAlester, OK 74501 Quote submission requirements: The following shall be submitted in response to this solicitation: (1) Contractor must provide a quote for each CLIN and the total dollar amount for all CLINs. (2) Company name, CAGE code, and DUNS number. (3) Point of Contact (POC) (Name/Title/phone number/mailing & email address). (4) Technical documentation identifying contractor's ability to comply with solicitation requirements. Basis for Award: In accordance with FAR 52.212-1(g), the Government intends to award a contract without discussions. However, the Government reserves the right to conduct discussions if later determined by the Contracting Officer to be necessary. In accordance with FAR 12.602, streamlined evaluation procedures will be utilized for this procurement and are as follows: Award will be only be made to B&P Littleford as they have been determined to be the only responsive and responsible contractor who can meet the terms and conditions of the solicitation. Award will be made on a firm-fixed-price basis. The following Federal Acquisition Regulation (FAR), and Defense Federal Acquisition Regulations Supplements (DFARS) commercial clauses, apply to this solicitation and are incorporated by reference (clauses may be obtained via the internet at https://www.acquisition.gov/far/part-52): Clauses: FAR 52.203-3, Gratuities FAR 52.203-12, Limitation on Payments to Influence Certain Federal Transactions FAR 52.203-17, Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistleblower Rights FAR 52.204-4, Printed or Copied Double-Sided on Postconsumer Fiber Content Paper FAR 52.204-6, Unique Entity Identifier FAR 52.204-7, System of Award Management FAR 52.204-9, Personal Identity Verification of Contractor Personnel FAR 52.204-12, Unique Entity Identifier Maintenance FAR 52.204-13, System for Award Management Maintenance FAR 52.204-16, Commercial and Government Entity Code Reporting FAR 52.204-18, Commercial and Government Entity Code Maintenance FAR 52.209-7, Information Regarding Responsibility Matters. FAR 52.209-9, Updates of Publicly Available Information Regarding Responsibility Matters FAR 52.209-10, Prohibition on Contracting with Inverted Domestic Corporations FAR 52.209-12, Certification Regarding Tax Matters FAR 52.212-1, Instructions to Offerors-Commercial Items FAR 52.212-4, Contract Terms and Conditions-Commercial Items FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items; within FAR 52.212-5, the following optional clauses apply: FAR 52.203-6, Restrictions on Subcontractor Sales to the Government FAR 52.204-10, Reporting Executive Compensation and First-Tier Subcontract Awards FAR 52.209-6, Protecting the Government's Interest When Subcontracting with Contractors Debarred, Suspended, or Proposed for Debarment FAR 52.219-8, Utilization of Small Business Concerns FAR 52.219-28, Post Award Small Business Program Representation FAR 52.222-3, Convict Labor FAR 52.222-19, Child Labor-Cooperation with Authorities and FAR 52.222-37, Employment Reports on Veterans FAR 52.222-40, Notification of Employee Rights Under the National Labor Relations Act FAR 52.222-50, Combating Trafficking in Persons FAR 52.223-18, Encouraging Contractor Policies to Ban Text Messaging while Driving FAR 52.225-13, Restrictions on Certain Foreign Purchases FAR 52.232-33, Payment by Electronic Funds Transfer-System for Award Management FAR 52.219-14, Limitations on Subcontracting FAR 52.229-3, Federal, State, and Local Taxes FAR 52.232-40, Providing Accelerated Payments to Small Business Sub-contractors FAR 52.233-3, Protest after Award FAR 52.233-4, Applicable Law for Breach of Contract Claim FAR 52.243-1, Changes Fixed Price FAR 52.246-2, Inspection of Supplies-Fixed Price FAR 52.246-23, Limitation of Liability FAR 52.247-34, F.O.B. Destination FAR 52.247-64, Preference for Privately Owned U.S. Flag Commercial Vessels DFARS 252.203-7000, Requirements Relating to Compensation of Former DOD Officials DFARS 252.203-7005, Representation Relating to Compensation of Former DOD Officials DFARS 252.204-7003, Control of Government Personnel Work Product DFARS 252.204-7008, Compliance with Safeguarding Covered Defense Information Controls DFARS 252.204-7011, Alternative Line Item Structure DFARS 252.204-7012, Safeguarding of Unclassified Controlled Technical Information DFARS 252.209-7002, Disclosure of Ownership of Control by a Foreign Government DFARS 252.209-7004, Subcontracting with Firms that are Owned or Controlled by the Government of a Country that is a State Sponsor of Terrorism DFARS 252.211-7003, Item Unique Identification and Valuation DFARS 252.211-7008, Use of Government assigned Serial Numbers DFARS 252.215-7007, Notice of Intent to Resolicit DFARS 252.215-7008, Only One Offer DFARS 252.222-7007, Representation Regarding Combating Trafficking in Persons DFARS 252.223-7008, Prohibition of Hexavalent Chromium DFARS 252.225-7000, Buy American Balance of Payments Program Certificate DFARS 252.225-7001, Buy American and Balance of Payment Program DFARS 252.225-7002, Qualifying Country Sources as Subcontractors DFARS 252.225-7012, Preference for Certain Domestic Commodities DFARS 252.225-7021, Trade Agreements DFARS 252.225-7050, Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism DFARS 252.226-7001, Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns DFARS 252.232-7003, Electronic Submission of Payment Requests and Receiving Reports DFARS 252.232-7006, Wide Area Workflow Payment Instructions DFARS 252.232-7010, Levies on Contract Payments DFARS 252.243-7001, Government Access DFARS 252.243-7002, Requests for Equitable Adjustments DFARS 252.244-7000, Subcontracts for Commercial items DFARS 252.247-7022, Representation of Extent of transportation by Sea DFARS 252.247-7023, Transportation of Supplies by Sea The following additional information applies: MCAAP SITE SPECIFIC INFORMATION: CONFORMANCE WITH ENVIRONMENTAL MANAGEMENT SYSTEM - FOR WORK PERFORMED AT MCALESTER ARMY AMMUNITION PLANT The Contractor shall perform work under this contract consistent with all applicable federal, state, local requirements and with the relevant policy and objectives identified in McAlester Army Ammunition Plant's (MCAAP's) environmental management system (EMS) located at http:www.mcaap.army.mil. The Contractor shall perform work in a manner that conforms to all applicable Environmental Management Programs and Operational Controls identified by the MCAAP EMS, and provide monitoring and measurement information as necessary for the organization to address environmental performance relative to MCAAP's EMS objectives and goals. In the event an environmental nonconformance or noncompliance associated with the contracted services is identified, the Contractor shall take corrective and/or preventative actions. In the case of a noncompliance, the Contractor shall respond and take corrective action immediately. In violations caused by Contractor negligence, the Contractor shall reimburse the Government for the amount of that fine and all associated costs. The Contractor shall also provide cleanup of any spills, including oil, that result from the Contractor's operations and report spills to MCAAP's Environmental Management Office. In the case of a nonconformance, the Contractor shall respond and take corrective action based on the time schedule established by the Environmental Management Office and approved by the Contracting Officer. In addition, the Contractor shall ensure that their employees are aware of the roles and responsibilities identified by the EMS and how these requirements affect their work performed under this contract. Prior to commencing work, all on-site Contractors shall provide documentation to the Contracting Officer that any required EPA sponsored environmental training specified for the type of work conducted has been obtained. Upon contract award, and during performance of the contract, the Contracting Officer's Representative will provide or arrange EMS training for appropriate Contractor staff. PROHIBITED WITHIN GENERAL CONFINES OF INSTALLATION The following are prohibited within the general confines of the McAlester Army Ammunition Plant at any time: Firearms/dangerous weapons Drugs/intoxicants Binoculars, cameras, camera equipment, cell phones and PDAs with camera capability (unless authorized by the Security Officer) Matches, lighters or other fire flame or spark producing devices in designated areas Gas cans/flammable material storage containers (unless approved by MCAAP Fire Department) Fireworks without the Commander's approval Smoking in all buildings, when handling flammable and hazardous materials, in railroad cars, trucks and vans, on warehouse docks and platforms, in open storage containing combustibles, within 50 feet of a gasoline refueling storage or drainage area, where posted signs prohibit smoking. SECURITY Requirements - Badging (a) Any foreign nationals without a green card will not be allowed entrance to the installation. Those individuals with a green card must be escorted within the restricted area at all times. (b) Contractors by virtue of contract award will be given access privileges to McAlester AAP. Contractors/Sub-Contractors are required to provide security at McAlester AAP a letter of introduction for company personnel by providing the following: 1) Name; 2) Physical Address (including city and state); 3) Date of Birth; 4) Place of Birth; and 5) Whether or not they are a U.S. Citizen on company letterhead. Photo I.D. will also be required to obtain a security badge. Information shall be provided to McAlester AAP, Security Division, Attn: Ms. Ginger Maxwell, McAlester, OK 74501, ginger.a.maxwell.civ@mail.mil (Applies to contracts that require access to restricted areas). (c) Each member of the Contractor's work force shall be individually badged at the Security Office in Building 31. The badge shall be retained and worn by the Contractor's employees throughout the contract period. (Applies to contracts that require access to restricted areas). (d) Contractor is responsible for the turn-in of all security badges, including sub-contractors badges, daily and upon completion of the contract or termination of individual employees. (Applies to contracts that require access to restricted areas) (e) Report lost badges to the Security Office and the KO as soon as the loss is discovered. (Applies to contracts that require access to restricted areas) (f) Be prepared to produce security badges each time entering a security area. Temporary badges for any individual who may have forgotten his/her badge can be obtained from the Security Office. (Applies to contracts that require access in restricted areas). SECURITY Requirements - Vehicles (1) TRAFFIC ENFORCEMENT: (a) McAlester AAP traffic laws are enforced by the Law Enforcement and Security Division using Oklahoma state codes. All roads/streets have speed limit signs posted; (b) Traffic violations are adjudicated by the U.S. Magistrate located at McAlester AAP. Court appearances may be requested or mandatory; and (c) Radar is used to enforce traffic speed limits. (2) INSURANCE: All vehicles entering the installation must possess the minimum insurance as required by the State of Oklahoma. (3) VEHICLES: (a) Vehicles entering McAlester AAP, whether Contractor-owned or privately owned, shall undergo inspections and may be issued a pass if entering a restricted area. Vehicle permits for restricted areas will be issued for up to 45 days maximum. Each vehicle will be required to carry a fire extinguisher at all times; (b) Company or privately-owned vehicles, when parked, must have ignition keys removed. After duty hours, vehicles left on the installation will be parked outside restricted areas unless otherwise stipulated in the contract. Vehicles or equipment remaining inside restricted areas will be properly secured or immobilized; and (c) Contractor is solely responsible for the removal of incapacitated vehicles or equipment from restricted areas. (d) All vehicles shall be parked at least 20 meters from all buildings unless unloading or loading; and (e) The contractor can expect to be inspected at one or all of the two manned gates. The contractor should expect five to ten minute delays at each gate. In addition, to get to some of the remote areas, the contractor should expect at least a 15-minute delay both in and out to allow security to open necessary gates. (4) RESTRICTED AREAS: Any contractor personnel granted access into restricted areas will be subject to vehicle search upon entering or leaving these areas possibility resulting in some delay. Any non-US contractor personnel granted access into restricted areas will at all times be escorted by US contractor personnel who have been properly badged and granted access. (Applies to contracts that require work in restricted areas). RECEIVING OFFICE REQUIREMENT - MCAAP At the McAlester Army Ammunition Plant truck shipments are accepted at Warehouse 8, Receiving Office, Monday through Thursday (except holidays) from 6:30 A.M. until 3:00 P.M. only. All shipments and deliveries must be at the main gate (truck gate) on or before 3:00 P.M. No shipments will be accepted after 3:00 P.M. unless prior arrangements have been made. Receiving CLOSED and NOT accepting any deliveries on the following dates in 2025 and 2026. Monday, January 16, 2025 - Martin Luther King Jr. Day Monday, February 20, 2025 - Presidents Day Thursday, May 25, 2025 - Founder's Day Monday, May 29, 2025 - Memorial Day Monday, June 19, 2025 - Juneteenth Holiday Monday - Tuesday July 3-4, 2025 - Independence Day Shut Down Monday, September 4, 2025 - Labor Day Monday, October 9, 2025 - Columbus Day Thursday, November 9, 2025 - Veterans Day (Observed) Thursday, November 23, 2025 - Thanksgiving Day Monday - Thursday, December 25-28, 2025 - Christmas Holiday Shut Down (Receiving CLOSED - NO Deliveries Accepted) Monday, January 1, 2026 - New Year's Day Monday, January 15, 2026 - Martin Luther King Jr. Day Any deliveries for Thursday afternoons during the months of May and June SHALL BE scheduled in advance by calling 918-420-6695 to verify that deliveries are being accepted that day. To gain entry to the installation for shipment/delivery, delivery drivers shall have a valid driver's license, residency status documentation (green card) if foreign national, and NO outstanding criminal history. Any other occupants of the delivery vehicle must also meet these requirements. No shipments will be accepted on government holidays. Also reference Security Requirements if needed. PACKING LIST To expedite your payment, all shipments under this order shall be accompanied with packing lists or delivery tickets which shall contain the following information: A. Name of supplier B. Purchase order number, CLIN, and purchase request number C. Date of order D. Itemized list of supplies to include noun name, part number, quantity and unit of issue. CERTIFICATE OF CONFORMANCE/CERTIFICATE OF ANALYSIS At time of material shipment, copies of the Certificate of Conformance and Certificate of Analysis for each batch/lot of material shipped are to accompany the shipment. Failure to do so will delay processing of payment to the contractor. The certificate must contain at a minimum the following fields of data: (a) Manufacturer Name (Materials are qualified by manufacturer not distributor) (b) Product Name or Description (c) National Stock Number (If available) (d) Specification (e) Lot/Batch Number (f) Manufacture Date (g) Expiration/Re-inspection Date (h) Analytical Data MARKING INSTRUCTIONS Mark all correspondence, parcels, packing slips, and invoices with the purchase order number W519TC (as appropriate) - and with the purchase requisition number (see schedule) to ensure prompt and complete payment. HOURS OF OPERATION - MCAAP Normal work hours are Monday through Thursday 6:30 A.M. until 5 P.M. Contractors will not be permitted to work on Fridays, Saturdays, Sundays, or legal holidays for any reason, unless otherwise approved by the Contracting Officer. The following legal holidays will be observed: January 1st 3rd Monday of January 3rd Monday of February Last Monday of May July 4th 1st Monday of September 2nd Monday of October November 11th 4th Thursday of November December 25th When one of the designated holidays falls on a Friday or Saturday, holiday will be observed on Thursday. If the holiday falls on a Sunday, holiday will be observed on the following Monday. ACC-RI LOCAL INFORMATION: CLAUSES/SOLICITATION PROVISIONS INCORPORATED BY REFERENCE This solicitation incorporates one or more clauses and/or solicitation provisions by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. The offeror is cautioned that the listed provisions may include blocks that must be completed by the offeror and submitted with its quotation or offer. In lieu of submitting the full text of those provisions, the offeror may identify the provision by paragraph identifier and provide the appropriate information with its quotation or offer. Also, the full text of a solicitation provision may be accessed electronically at these addresses: https://www.acquisition.gov/far/part-52 DISCLOSURE OF UNIT PRICE INFORMATION This constitutes notification pursuant to Executive Order 12600, Pre-Disclosure Notification Procedures for Confidential Commercial Information (June 23,1987), of our intention to release unit prices of the awardee in response to any request under the Freedom of Information Act, 5 USC 552. Unit price is defined as the contract price per unit or item purchased. We consider any objection to be waived unless the Contracting Officer is notified of your objection to such release prior to submission of initial proposals. POST-AWARD CONFERENCE The contractor agrees to attend any Post-Award conference convened by the contracting activity or contract administration office in accordance with Federal Acquisition Regulation subpart 42.5. AUTHORIZED SIGNATURE The signature on this solicitation, offer or contract should be the signature of: (a) A Corporate Officer (President, Vice-President, Treasurer, Secretary); or, (b) An individual authorized in writing by a Corporate Officer to bind the company to a legal document.

More opportunities from Department Of Defense → W6QK Acc-Ri

Same awarding agency

NAICS: 541380
New
Federal
Granite Surface Plate Calibration and lapping - updated Docs
Solicitation # W519TC27QA007
Solicitation W519TC27QA007, issued by the Army Contracting Command - Rock Island, seeks an ISO 17025 accredited vendor to provide annual inspection, calibration, and lapping/repair of granite surface plates at the Rock Island Arsenal Joint Manufacturing and Technology Center in Illinois. This Firm Fixed Price contract consists of a base year running from February 2, 2027, to February 1, 2028, with four subsequent one-year option periods. All work must adhere to ASME B89.3.7 for flatness and ANSI Z-540-1 standards traceable to NIST. Key deliverables include the application of calibration stickers to each plate and the submission of a Service Acceptance Report within three business days of completion. To be considered, vendors must submit their proposals by November 9, 2026, including proposed fixed prices for all periods, documentation of technical capability, and a signed concurrence of the Scope of Work. Personnel requiring installation access must complete AT Level I awareness training and comply with strict security mandates, including CAC requirements and iWATCH briefings. Award evaluation is based on price and technical capability. Contract administration will be managed through the Wide Area WorkFlow system for invoicing, and performance will be monitored via a 100 percent inspection surveillance method as outlined in the Quality Assurance Surveillance Plan.
Testing Laboratories and Services

POSTED

about 6 hours ago

DEADLINE

in 20 days
View Details
NAICS: 541612
New
Federal
DRAFT RFPs – Human Resource Solutions, GEN VI IDIQ Contracts
Solicitation # W519TC-26-R-AHRS
The Army Contracting Command-Rock Island is seeking industry feedback on draft Requests for Proposals for the Sixth Generation (GEN VI) Human Resource Solutions Indefinite-Delivery, Indefinite-Quantity (IDIQ) multiple-award contract suites. This initiative comprises two primary components: Personnel Lifecycle Support (PLS) and Recruiting Management Administrative Support (RMAS). The scope of work involves providing comprehensive HR services for the Army, Department of Defense, and other federal agencies, focusing on the entire personnel lifecycle, including manning the force, recruitment, forecasting, placement, training, and performance management. The procurement is designated as a 100 percent small business set-aside with a total period of performance of ten years, structured as one five-year base period and one five-year option period. The government intends to make multiple awards based on an integrated assessment of technical capabilities and past performance, using acceptable or unacceptable ratings. Price and cost will not be evaluated for the base IDIQ awards but will be considered during the subsequent task order award process. Technical evaluations will prioritize corporate experience over management and staffing approaches. Eligible awardees must meet all material solicitation requirements and, for other-than-small-business offerors, provide an acceptable Small Business Subcontracting Plan. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to specific quality control and security standards, including DD254 contract security classifications.
Human Resources Consulting Services

POSTED

about 6 hours ago

DEADLINE

in 6 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS