Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

1HM 5305 016429505 D4, SCREW,CAP,SOCKET HE

Active
N00104-26-Q-FD54Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, N00104-26-Q-FD54, is a Total Small Business Set-Aside for the procurement of a socket cap screw with NSN 1HM 5305-01-642-9505 D4, issued by the Naval Supply Systems Command Weapon Systems Support based in Mechanicsburg, Pennsylvania. The solicitation is strictly reserved for small businesses as defined under FAR 19.5, with mandatory compliance to clauses including 52.219-28 for post-award small business rerepresentation and 52.219-6 for notification of the set-aside. Offerors must maintain active SAM registration with a valid UEI and CAGE code, and are subject to representation requirements regarding socioeconomic status, including WOSB, 8(a), HUBZone, and service-disabled veteran-owned categories, with affirmative responses triggering additional reporting obligations. The contract structure is implied to be fixed-price, supported by clauses such as 52.243-1 for changes and 52.249-14 for excusable delays, while prompt payment and electronic funds transfer are mandated through 52.232-25 and 52.232-33. Packaging and marking must strictly follow MIL-STD-2073-1 and MIL-STD-129, with specific requirements for barrier materials, preservation levels, and DLR labeling per MIL-PRF-61002. All items require Unique Item Identification encoded per ISO/IEC standards using Data Matrix barcodes, and ESD-sensitive components must comply with ANSI/ESD S20.20-2021. Deliveries are to be made FOB destination to the primary performance location at 5450 Carlisle Pike, Mechanicsburg, PA, with a maximum delivery window of 200 days from award. Inspection and acceptance may occur at origin or destination, as determined by the contracting officer, with zero-defect criteria and 100% inspection of objective quality evidence required, governed by ANSI/ASQ Z1.4 and ISO 9001. Compliance with military specifications such as FF-S-86, MIL-STD-792, and EB Specs is mandatory, and contractor quality systems must support traceability, nonconformance reporting, and corrective actions. The award will be made to the offeror most

General Info

Department of Defense seeks small business bids for socket head cap screws, due May 28, 2026.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

Mechanicsburg, PA, 17050, USA

Set-Aside

SBA

Documents

(1)

N00104-26-Q-FD54.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
TIANA HAMMAKER

Full Description

Show more

SEE ATTACHED SOLICITATION

Similar Contracts

Same NAICS industry code

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QQC17
This contract pertains to the repair of CIRCUIT CARD ASSEMBLY under Emergency Acquisition Authority, issued via a Basic Ordering Agreement (BOA) with terms incorporated by reference, where any conflict between the order and the BOA favours the BOA. The work requires adherence to strict technical standards including MIL-STD-130 Rev N for marking, and all repairs must conform to the original manufacturer's specifications, drawings, and approved procedures. The Contractor is responsible for all inspection and quality assurance activities, with records required to be maintained for 365 days after final delivery. Government Source Inspection is mandatory, and compliance is non-negotiable—defective or non-conforming items will not be accepted regardless of sampling results. The Repair Turnaround Time (RTAT) is set at 730 days, measured from physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system, with acceleration encouraged. All freight is FOB Origin, and the Navy manages logistics via CAV. The contract is a firm-fixed-price arrangement with a mandatory requirement for the contractor to quote the full RTAT or provide capacity constraints if unable to meet it. Pricing must be justified, especially if new or higher than historical values, with documentation of prior commercial sales or comparable NSNs required. If the item is deemed beyond repair, a negotiated testing and evaluation fee may apply. The Government retains the option to increase quantities within one year post-award at the original contract unit price. The awardee must be an authorized distributor of the original manufacturer, with written proof submitted. Cybersecurity maturity certification, Buy American requirements, Small Business Subcontracting Plan, and Security Prohibitions under Deviation 2026-O0025 are all applicable. Items must be packaged per MIL-STD-2073, and access to controlled technical documents requires certification for distribution codes such as C, D, E, or F. Performance location and inspection CAGE codes must be clearly provided, and all responses must be received by August 20, 2026, with bilateral acceptance required before contract execution.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 332919
New
Federal
ADAPTER ASSY
Solicitation # N0010426QBY09
This contract pertains to the procurement of an ADAPTER ASSY under solicitation N0010426QBY09, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical division, with a response deadline of July 23, 2026. The solicitation mandates strict compliance with a range of technical, quality, and procedural requirements outlined in the Individual Repair Part Ordering Data (IRPOD), which is mandatory for vendor review and forms the cornerstone of technical specifications. All contractual documents, including drawings, specifications, and technical data, must be obtained from the BPMI e-Commerce site under password-protected access, and distribution of certain materials is strictly controlled as NOFORN, requiring prior approval from Naval Sea Systems Command for any transmission to foreign entities. The contract enforces a defined order of precedence for resolving conflicts among technical documents, with amendments and the schedule taking highest priority followed by the IRPOD, drawings, and referenced standards. Contractors must adhere to the exact revision levels of cited documents and seek formal approval before using alternate revisions or proposing deviations, particularly for critical repair parts, where non-conformance must be justified with technical data demonstrating no impact on form, fit, or function. Quality assurance is governed by the IRPOD, requiring contractors to maintain an inspection system acceptable to the government and retain complete records throughout contract performance. Packaging requirements are dictated by MIL-PRF-23199 and related standards, with specific rules for the use of heat-sealed envelopes for cleanliness-controlled parts and explicit exclusion of mercury and fire-retardant materials. Transportation is governed by sea transport protocols, and payment instructions mandate the use of Wide Area Workflow for invoice and receiving report submission. The contract requires two critical pre-award submissions: a procedure package per DI-QCIC-8871 within 45 days after award and a certified test and inspection report package per DI-QCIC-8872 by the end of contract performance, each submitted separately per unique contract and NSN combinations. Pricing is valid for 60 days post-close, and all contractual documents are deemed issued upon electronic transmission. The solicitation is a total small business set-aside, and compliance with cybersecurity maturity certification and government-wide security prohibitions is required. Vendors must also provide accurate DD Form 1423 data items with proper blocking and pricing group classifications, and all deliverables must comply with government distribution statement controls to ensure proper safeguarding of technical data.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
48--VALVE, HULL/BACKUP
Solicitation # N0010426RNC68
This contract pertains to the procurement of a 2-inch combination hull and backup ball valve designated as SPECIAL EMPHASIS material (Level I, Scope of Certification) due to its critical role in a shipboard system, where failure could result in serious injury, loss of life, or loss of the vessel. The valve must conform strictly to Naval Sea Systems Command drawing 6408529 and other referenced drawings, with specific dimensional and material requirements detailed for each component, including stems, nuts, seats, and balls. Material specifications are highly restrictive, requiring certified alloys such as UNS N05500 and UNS 96400, with mandatory heat treatment, mechanical and chemical testing, and traceability from raw stock to finished part. Non-metallic components like seats must be sourced exclusively from Mearthane Products Inc. and meet exact physical properties for hardness, tensile strength, and water absorption. All materials must be traceable through unique batch, heat, or lot numbers permanently marked on the components, with strict controls on welding, brazing, radiography, and nondestructive testing procedures per MIL-STD-2035, SAE-AMS-6931, and T9074-AS-GIB-010/271 standards. Quality assurance is centralized under ISO-9001 or MIL-I-45208, with mandatory Government inspection at source, full certification submission for all tests, and 100% verification of traceability, material certification, and NDT results prior to shipment. The contractor must hold a valid U.S. security clearance of Confidential or higher due to access to classified documents, including the confidential drawing 6404016. Performance is governed by emergency acquisition flexibilities, with a bilateral award requiring formal contractor acceptance. All deliverables must comply with Buy American and small business subcontracting mandates, and the valve must be free of mercury and prohibit the use of molybdenum disulfide lubricants. The contract enforces rigorous configuration control, requiring engineering change proposals for any modifications and strict waiver procedures submitted via the ECDS system. Packaging and shipping must follow FOB-destination terms, with payment processed via Wide Area Workflow using standardized receiving reports. Warranty coverage is one year from delivery, and all items require a Certificate of Compliance certifying conformance to every technical specification, drawing, and clause. A detailed 100% inspection regime applies to all traceable components, certifications
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 334412
New
Federal
59--CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAEQ
This contract pertains to the manufacture and delivery of a CIRCUIT CARD ASSEMBLY under solicitation N0010426QYAEQ, issued by the Department of Defense through NAVSUP Weapon Systems Support in Mechanicsburg, PA. The requirement is governed by a fixed-price structure with strict compliance mandates, including adherence to MIL-STD-129, MIL-STD-130 for marking, MIL-I-45208 for inspection quality systems, and ISO9001 as an acceptable alternative. The contractor must ensure the product is mercury-free and free from contamination, with any intentional use of mercury requiring prior written approval and specific labeling. Electrostatic discharge controls must conform to ANSI/ESD S20.20, and any design, material, or part number changes must be notified and approved through a formal code-based change process. The contractor is responsible for all inspection duties and must maintain full documentation for four years post-delivery. The contract includes a one-year warranty from delivery date, a 365-day option to increase quantity by up to 100% at the original price, and mandatory compliance with Buy American and Defense Priorities and Allocations System (DPAS) requirements, making it a rated order for national defense. Contractors must be authorized distributors of the original equipment manufacturer and provide proof of authorization. Compliance with cybersecurity maturity certification, veteran and disability equal opportunity provisions, and prohibition of child labor in supply chains is required. All contractual documents are deemed issued upon electronic transmission, and acceptance requires bilateral agreement. Packaging must follow MIL-STD-2073, and distribution of attached documents is restricted under specified DoD distribution statements, with NOFORN and Official Use Only materials requiring formal certification requests. The solicitation response deadline is August 24, 2026, and delivery is expected to support submarine and surface ship systems.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 332919
New
Federal
STEM, VALVE
Solicitation # N0010426QNC95
This contract pertains to the supply of a stem for a 2-inch ball valve designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), critical to shipboard systems where failure could lead to catastrophic outcomes including loss of life or vessel. The item must strictly conform to NAVSEA drawing 801-6408529 and referenced specifications including QQ-N-286 for material composition, MIL-STD-792 for marking, MIL-STD-1622 for cleaning, and T9074-AS-GIB-010/271 for ultrasonic inspection. Weld repair is prohibited on QQ-N-286 material, and all components must maintain traceability from raw material through final assembly via unique heat-lot markings applied per MIL-STD-792, with exceptions for small surfaces requiring durable tags. Chemical and mechanical testing must be performed on the stem and any starting material over 4 inches in dimension, with results certified by approved labs including Huntington Alloys, Metallurgical Consultants, and Naval Surface Warfare Center Carderock. Electronic signatures are accepted for certifications, provided they are uniquely controlled and auditable, and all certifications must include positive, unqualified statements of compliance without disclaimers. The contractor must maintain an ISO-9001 or MIL-I-45208 quality system with calibration aligned to ISO-10012 or ANSI-Z540.3, subject to government inspection at source. All sub-tier suppliers must be vetted for capability and performance, with quality requirements flowed down and monitored through audits. Receiving inspection requires 100% verification of traceability, certification completeness, and dimensional compliance per ANSI/ASQ Z1.4, with zero defects allowed in final lot acceptance. Certifications for each shipment must be electronically submitted via WAWF to Portsmouth Naval Shipyard, with strict "Ship to," "Inspect by," and "Accept by" codes, and no material may be shipped until written acceptance is received. Configuration control is paramount; any deviations or engineering changes must be formally proposed and approved by the Contracting Officer, with class I changes requiring a formal ECP that includes lifecycle cost impacts and logistic effects. The contract mandates mercury-free materials, prohibits marking of material with designators except fasteners, and requires full adherence to Buy American and Small Business Program requirements. All documentation must be submitted through ECDS, and government representatives have full rights to audit, inspect, and reject non
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QNC93
This contract pertains to the procurement of a stem assembly for a size 6-inch ball valve, designated as SPECIAL EMPHASIS material (Level I/SUBSAFE), intended for critical shipboard systems where failure could lead to catastrophic consequences including loss of life or the vessel. The item must strictly conform to Naval Sea Systems Command drawings 803-4384678 and 803-4384681, along with referenced specifications such as QQ-N-286 for material composition and MIL-STD-2035 for inspection criteria. All components, particularly the stem (Piece 82), require rigorous chemical and mechanical certification traceable to unique heat-lot identifiers marked directly on the part or on a durable tag if surface area is insufficient. Material must be free of mercury, and no weld repair is permitted on QQ-N-286 material. Testing, including dye penetrant and ultrasonic inspection, must be performed by approved laboratories and documented with fully compliant, unqualified certification reports. Electronic signatures are accepted but must be uniquely controlled and authenticated. The contractor must maintain a certified quality system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to government audit at any time. Traceability must be preserved throughout the entire manufacturing and supply chain process, including all subcontractors, with strict procedures for handling, storage, and re-marking if original markings are removed during processing. All certifications, inspection records, and test data must be submitted via the Wide Area Work Flow system to the Portsmouth Naval Shipyard for review and explicit acceptance prior to shipment; no material may be shipped before acceptance. The contract mandates zero-defect acceptance under ANSI/ASQ Z1.4 sampling standards and requires compliance with Buy American and Small Business Subcontracting Plan provisions. Engineering changes must be formally proposed via ECPs, and all waivers or deviations require Contracting Officer approval. The procurement is issued under Emergency Acquisition Flexibilities, is DO-certified under the Defense Priorities and Allocations System, and requires bilateral acceptance. All documentation must be submitted through ECDS, with specific formatting, submission channels, and government acceptance authorities clearly outlined for compliance.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333613
New
Federal
ROD, PUSH
Solicitation # N0010426QFF18
The contract involves the supply of a push rod designated as SPECIAL EMPHASIS material (Level I/SUBSAFE) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or vessel. The item must strictly comply with NAVSEA drawing 7614787 and material specification QQ-N-286, hot finished and age hardened with a Brinell hardness of 265–320, with welding explicitly prohibited on this material. All components require comprehensive certification including quantitative chemical and mechanical analysis, ultrasonic inspection of starting material, and slow strain rate tensile testing conducted only by designated laboratories. Traceability is mandatory from raw material through final assembly, requiring permanent, legible markings on each part linked to certified test reports, with batch sampling every eight hours during production. Electronic signatures are accepted on certification documents, provided they are uniquely controlled, authenticated, and tamper-evident. No disclaimers are permitted—certifications must be positive and unqualified. All suppliers must maintain an ISO-9001 quality system with calibration control per ISO-10012 or ANSI-Z540.3 and ISO-17025, subject to government audit at any time prior to and during production. Government Quality Assurance is performed at source, and all subcontractors must be vetted and monitored for compliance. Each shipment requires submission of certification data via WAWF to Portsmouth Naval Shipyard (DODAAC N50286), with inspection and acceptance handled by N39040 and notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL; no material may be shipped without prior acceptance. Final delivery must occur within 365 days of contract effective date, with early or incremental delivery allowed at no additional cost. The contract strictly prohibits mercury-containing materials, mandates configuration control through Engineering Change Proposals for any modifications, and requires 100% inspection of traceability, certification data, and nondestructive test results. Only suppliers with an approved Quality Control Manual are eligible, and the solicitation is set aside for small businesses under a total small business set-aside, with Buy American and DPAS priority rating requirements in effect.
Mechanical Power Transmission Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
STEM,FLUID VALVE
Solicitation # N0010426QFC92
This contract is for the procurement of a STEM, FLUID VALVE designated as SPECIAL EMPHASIS material (Level I) due to its critical role in a shipboard system where failure could result in catastrophic consequences including loss of life, ship, or vital systems. The material must strictly conform to NAVSEA drawings 5959302 and 5959311 and comply with a comprehensive set of military and international standards including MIL-DTL-24252, MIL-STD-2132, MIL-STD-792, ISO 9001, ISO 10012, ISO/IEC 17025, and ANSI/ASQ Z1.4. All components, particularly the stem made from MIL-DTL-24252 Composition I, Condition CA-7, require precise chemical and mechanical analysis with full traceability from raw material through every manufacturing step to final assembly, with mandatory marking of traceability identifiers on all parts. No weld repairs are permitted, and mercury or mercury-containing compounds are strictly prohibited. The contractor must maintain a qualified quality system aligned with ISO 9001 and either MIL-I-45208 or ANSI/NCSL Z540.3 with ISO 17025, subject to government audit at any time. All certification data, including test results for dye penetrant inspection and other nondestructive evaluations, must be submitted electronically via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard (DODAAC N50286) for review and acceptance prior to any shipment, with strict deadlines: certification submissions 20 days before delivery and PNSY review within 30 working days. Final delivery of all material is due no later than 365 days after contract effective date. Certification documents must be 100% complete, legible, and positively state full compliance with all requirements—no disclaimers are allowed. Electronic signatures are accepted if properly controlled and uniquely attributable to the signer. Traceability markings must be permanently affixed in accordance with MIL-STD-792, and for items with limited surface area, a durable tag must be securely attached. The procurement is a total small business set-aside and requires compliance with Buy American and foreign trade agreement certifications. Access to Naval Nuclear Propulsion Information (NNPI) and NOFORN data is mandatory for all personnel handling drawings or technical data; contractors must
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 334290
New
Federal
COMMUNICATIONS CONT
Solicitation # N0010426QTB90
This contract concerns the repair of COMMUNICATIONS CONT equipment under solicitation N0010426QTB90, with a required Repair Turnaround Time (RTAT) of 170 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract mandates strict adherence to technical standards including MIL-STD-130 for marking, compliance with manufacturer specifications, and performance under a firm-fixed-price structure. All repairs must be conducted in accordance with approved technical documentation and government-approved procedures, with no substitutions permitted without prior written approval from the NAVICP-MECH Contracting Officer. The government requires independent inspection and final acceptance of all repaired items, with records maintained for at least 365 days post-final delivery. Freight is FOB Origin, and the Navy manages all logistics via the CAV system. Failure to meet the RTAT triggers a per-unit, per-month price reduction, with a defined maximum cap, and may lead to termination for default, though excusable delays such as government-caused postponements are exempted. The contract includes several mandatory clauses covering cybersecurity maturity certification, Buy American compliance, small business subcontracting requirements, and the mandatory use of Workflow Pro’s Assist Module for invoicing and receiving. The award will be bilateral, requiring the contractor’s written acceptance before execution, and the government reserves the right to exercise an option for increased quantities within 365 days. Only authorized distributors of the original manufacturer may submit offers, and proof of authorization must accompany proposals. All technical documents provided by the Navy include distribution statements that dictate access and dissemination limits, and contractors must comply with security prohibitions and export control regulations. The contracting officer is Alison E. Harper, and all correspondence, quotes, and submissions must reference the specified RMA details, CAGE codes, unit pricing, and RTAT, with final delivery expected to meet the Government’s standard of quality and timeliness.
Other Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332919
New
Federal
ELBOWS
Solicitation # N0010426QFF05
This contract pertains to the procurement of elbows designated as SPECIAL EMPHASIS material (Level I) for use in critical shipboard systems, where failure could result in catastrophic consequences including loss of life or vessel. The components must strictly conform to NAVSEA drawing 4687601 and associated specifications, including SAE-AMS-QQ-S-763 Class 304 Condition A material with mandatory chemical and mechanical analysis. All items require traceability from raw material through final fabrication, with unique heat-lot markings permanently affixed to each part, and certification documentation that is fully traceable, unqualified, and submitted prior to delivery. The contract mandates adherence to rigorous quality systems based on ISO-9001, ISO-10012, and ISO/IEC 17025, with mandatory Government Quality Assurance at source, including inspections by DCMA representatives. Delivery must occur within 365 days of contract effective date, with certification data submitted 20 days prior to delivery and reviewed over 30 working days. Welding, brazing, and fabrication must follow S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, requiring prior submission and approval of procedures and welder qualifications. All welds, especially those involving titanium or hardfacing, demand specific documentation and chemical verification. Subcontractors are subject to the same standards, and the prime contractor must ensure compliance throughout the supply chain. Final acceptance requires 100% inspection of certification records, traceability markings, and nondestructive test results with zero defect tolerance for lot acceptance. The contract is a total small business set-aside, subject to Buy American and DPAS DX rating for national defense priority, with mandatory use of WAWF for payment and receiving reports, and ECDS for all submissions and waiver requests. Delivery is FOB destination, with compliance to MIL-STD-2073 for packaging and marking, and all materials must be mercury-free.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details