This Solicitation opportunity from Department Of Defense was posted on September 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

22 MXS - Walk-In Oven Troubleshoot

Closed

FA462126Q0045Federal

Submission Closed09/08/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333994

New

DIBBS

Custom Oven Assembly FabricationThis subcontract involves the fabrication of a single oven assembly, identified by NSN 7310-01-486-4360, for prime contractors supporting the Department of Defense Subsistence FSE Supply Chain. The manufacturer is responsible for the complete assembly of the chassis, control systems, and heating elements in strict accordance with Reference Drawing NR 81337, Revision B. To ensure compliance, the contractor must perform quality assurance testing based on the DLA Master List of Technical and Quality requirements and maintain DFARS traceability. This project falls under NAICS code 333999 and requires the delivery of one fully completed unit.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

OVEN ASSEMBLY, SINGLE

Solicitation # SPE3SE-27-Q-0011

Solicitation SPE3SE-27-Q-0011 is a Firm Fixed Price request for the procurement of one single oven assembly, identified by NSN 7310-01-486-4360. The acquisition is managed by the DLA Troop Support Subsistence FSE Supply Chain. The required equipment must be manufactured in accordance with Reference Drawing NR 81337, specifically Revision B dated October 9, 2014. Delivery is required within 30 days after receipt of order, with the destination, inspection, and acceptance point located at Fort Stewart, Georgia. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality requirements from the DLA Master List take precedence over general packaging standards. Administrative requirements include the submission of EDI invoices and receiving reports via the Wide Area Workflow system. The solicitation incorporates various FAR and DFARS clauses, including those regarding covered defense information, supply chain traceability, and the prohibition of certain foreign-sourced materials. Quotations must be submitted by October 13, 2026, and remain valid for 90 days.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0131

Solicitation SPE8E8-27-T-0131 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of one Dehydrator Cartridge, identified by NSN 4440-01-698-8300. The requirement specifies adherence to basic drawing 14153 RE-8408144 Revision D. Quotations must be submitted via the DIBBS system by October 19, 2026. The government may utilize an automated award process, though a price evaluation preference is available for certified HUBZone Small Business Concerns. Offers utilizing additive manufacturing are ineligible for award unless specifically authorized. The contract mandates delivery to the Surface Combat Systems Training Command Hampton Roads in Virginia Beach, Virginia, with a required delivery date of June 12, 2025, and a lead time of 20 days after order. Shipping must be conducted via the fastest traceable means, excluding parcel post, with FOB Destination terms. Inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. All technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM standards. Administrative requirements include the use of the Wide Area Workflow system for electronic invoicing and receiving reports. The contractor must comply with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and regulations regarding the safeguarding of covered defense information. Hazardous materials must be labeled according to the Hazard Communication Standard. The primary point of contact for this acquisition is Alexis Selby.

Defense Logistics Agency

POSTED

DEADLINE

Vacuum Induction Melting Furnace - Cooler

Solicitation # 2627-030

The Saskatchewan Research Council is seeking quotations for the supply of two complete closed loop cooling water packages for a Vacuum Induction Melting furnace. These systems will be utilized within the REE Commercial Division in Saskatoon, Saskatchewan, to remove heat generated during the induction melting process and ensure safe, reliable operation by maintaining specific inlet water conditions. This solicitation, identified by number 2627-030, was posted on October 6, 2026, with a response deadline of October 21, 2026. Interested parties can coordinate with the primary point of contact, Roger Dauvin, regarding the requirements for this project located in Saskatchewan.

Saskatchewan Research Council

POSTED

DEADLINE

Supply of Electric Thermal Drying Oven (NSN 4430014820483)This subcontract involves the manufacture or procurement of one Electric Thermal Drying Oven, identified by NSN 4430014820483, to support prime contractors delivering equipment for DLA Troop Support. The project is managed under the Department of Defense through Construction & Equipment MRO SVC I, with the place of performance located in Norfolk. The contractor must ensure strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, compliance with FAR 52.204-24 regarding telecommunications and video surveillance equipment is mandatory. The final marked and packaged unit must be delivered within five days of the order.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Space Dehumidifier SupplyThis subcontract involves the supply of seven space dehumidifiers for prime contractors supporting the Department of Defense, specifically for the DDSP New Cumberland Facility. The equipment must strictly adhere to NSN 4440017008032 to ensure technical compliance with Defense Logistics Agency requirements. The contractor is responsible for the complete delivery of the units, which includes packaging according to ASTM D3951 standards and marking and labeling in accordance with MIL-STD-129. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 333994.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

OVEN, THERMAL DRYING, EL

Solicitation # SPE8E9-27-T-0098

Solicitation SPE8E9-27-T-0098 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of one electric thermal drying oven, identified by NSN 4430014820483 and Electric Boat Corporation part numbers H5722911-A1 or H5722911A-A1. The requirement specifies a delivery timeline of five days after order, with an original required delivery date of October 1, 2026. Supplies are to be delivered FOB Origin to the Submarine Force Atlantic in Norfolk, Virginia, using the fastest traceable shipping means. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Key security and safety stipulations include a CMMC Level 2 Self-Assessment, adherence to Covered Defense Information protocols, and a prohibition on the intentional addition of mercury. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding the Buy American Act, hazardous material identification, and the use of the Wide Area Workflow system for electronic invoicing and payment. Award is limited to contractors appearing on the Certified Contractors Access List due to export-control regulations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E8-27-T-0108

Solicitation SPE8E8-27-T-0108 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of seven space dehumidifiers, specifically Dri-Eaz Products Inc part number F515 under NSN 4440017008032. The requirement falls under NAICS code 333994. Quotes must be submitted via the DLA Internet Bid Board System by October 16, 2026. The contract specifies a delivery period of 162 days, with a need ship date of March 28, 2027, and an original required delivery date of May 6, 2027. Delivery is FOB Origin, with both inspection and acceptance occurring at the destination, the DDSP New Cumberland Facility in Pennsylvania. The contractor must adhere to strict packaging and marking standards, utilizing ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation also incorporates various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, sustainable products, and cybersecurity safeguarding of covered defense information. Additionally, offerors must comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Animal Care Services (ACS) Crematorium Replacement

Solicitation # 2001045440

The City of San Antonio is soliciting bids for the Animal Care Services Crematorium Replacement under solicitation number 2001045440. This turnkey project requires the fabrication, purchase, delivery, installation, startup, and staff training for one commercial grade cremation unit designed for animal remains at a large municipal shelter. The scope of work encompasses all necessary equipment, materials, permits, testing, commissioning, and labor. A critical component of the project is the removal and proper disposal of an existing incinerator located in an outdoor covered area, which necessitates obtaining FAA approval for crane usage. The project will be performed at the Animal Care Services facility located at 4710 State Highway 151, San Antonio, Texas. Bids are due by November 3, 2026, at 2:00 p.m. Interested parties should note that a pre-bid conference was scheduled for October 12, 2026, followed by a site visit on October 13, 2026. The solicitation is categorized under NAICS code 333994 and involves industrial incinerator standards and maintenance services.

POSTED

DEADLINE

Electric Thermal Drying Oven SupplierThis subcontract involves the manufacture and procurement of electric thermal drying ovens for prime contractors supporting Department of Defense supply contracts. The supplier is responsible for providing hardware that conforms to NSN 4430-01-142-8163 and the DLA Master List of Technical and Quality Requirements. All deliverables must undergo quality control inspections in accordance with FAR 52.246-1 and comply with DFARS 252.225-7001 Buy American standards. The completed ovens are to be delivered to DLA Distribution Puget Sound, with the place of performance located in Bremerton. This opportunity falls under NAICS code 333994 and was posted on October 1, 2026, with a response deadline of October 13, 2026.

POSTED

DEADLINE

DRIER, AIR-GAS, DESIC

Solicitation # SPE8E8-26-T-5860

Solicitation SPE8E8-26-T-5860 is a simplified acquisition issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one desiccant air-gas drier. The requirement specifies part numbers K002174, K002174N49, or LA8298-K002174 from Knorr Bremse (UK) Ltd, under NSN 4440-99-155-6468. The original required delivery date is July 21, 2025, with a delivery timeframe of 20 days after order. Shipping is FOB Origin, with inspection and acceptance occurring at the destination in Little Falls, Minnesota. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Compliance with the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is mandatory. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS) by October 13, 2026. Invoicing and payment processing are to be managed electronically through the Wide Area WorkFlow (WAWF) system.

Defense Logistics Agency

POSTED

DEADLINE

BLOCK, PEDESTAL, META

Solicitation # SPE8E8-26-T-5851

Solicitation SPE8E8-26-T-5851 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one metal pedestal block, identified by NSN 4430-13-116-6410. The solicitation was posted on October 1, 2026, with a response deadline of October 13, 2026. Delivery is required within five days after receipt of order, with the destination for inspection and acceptance located at the Cargo Movement Element in Aviano, Italy. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. Offerors must submit quotes via the DIBBS portal on an FOB Origin basis and provide representations regarding small business status and the use of covered defense telecommunications equipment. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

9 days ago

DEADLINE

in 3 days

AI Contract Overview

Solicitation FA462126Q0045 is a total small business set-aside for the professional services of a qualified industrial oven service technician at McConnell AFB, Kansas. The objective is to conduct an on-site evaluation, verify system functionality, and restore the base operations of an industrial vacuum oven located in Hangar 1124N. The scope of work includes performing physical inspections of oven doors, evaluating vacuum system performance, and restoring the baseline functionality of heating elements with a focus on heat distribution and airflow. The contractor is required to provide a detailed written findings report documenting all inspection data and recommendations for future repairs. All work must be completed within 90 calendar days of the contract award. The government intends to award a firm fixed price contract based on an evaluation of technical capability and price. To be eligible, contractors must demonstrate experience in servicing, repairing, and calibrating industrial heat processing and vacuum oven systems of similar complexity. Quotes are due by September 8, 2026, at 1:00 PM CST and must be submitted in a single PDF volume not exceeding five pages. Submissions must include a fully executed SF1449, including specific blocks on page one and pricing for CLIN 0001 on page three. Compliance with the Buy American program and restrictions on Class I Ozone Depleting Substances are required.

General Info

Industrial oven service technician for evaluation and repair at McConnell AFB by 9/3/2026.

Agency

Department Of Defense → FA4621 22 Cons Pk

NAICS

333994 - Industrial Process Furnace and Oven Manufacturing

Place of Performance

0, KS, 67221, USA

Set-Aside

SBA

Documents

B1124 – 22 MXS Walk-In Oven Site Visit Questions and Responses

1 page · q-and-a

High

FA462126Q00450001 Amendment 1

4 pages · amendment

High

FA462126Q00450002 Amendment 0002

3 pages · amendment

High

Hangar 1124N Walk-in Oven PWS - 14 Aug 2026

2 pages · sow

High

FA462126Q0045 Signed

25 pages · contract-document

Low

McConnell AFB Short Term Pass Request

2 pages · other

Low

Oven General Installation, Operation and Maintenance Instructions

manual

Low

Vendor Questions and Government Answers

3 pages · q-and-a

Low

Walk-In Oven Picture Portfolio

other

Low

image001.jpg

image002.jpg

image003.jpg

image004.jpg

image005.jpg

image006.jpg

image007.jpg

image008.jpg

image009.jpg

image010.jpg

image011.jpg

image012.jpg

image013.jpg

AI Contract Breakdown

Uniform Contract Format

Timeline

3 updates

PhaseClosed

PostedAug 18

Solicitation

Notice updatedAug 20

Notice details unchanged. Attachments may have changed.

Notice updatedAug 27

Response deadline changed from Sep 3, 2026 to Sep 8, 2026. The notice description changed.

Notice updatedSep 2

The notice description changed.

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4621 22 Cons Pk

Contacts2 people available

OfficeMCCONNELL AFB, KS, 67221-3702, USA

Organization / AgencyDepartment Of Defense → FA4621 22 Cons Pk

Office AddressMCCONNELL AFB, KS, 67221-3702, USA

Contacts

Adrian Arzate

SSgt Leroy Beeman

Full Description

The 22nd Maintenance Squadron at McConnell AFB, Kansas requests the professional services of a qualified industrial oven service technician to conduct an on-site evaluation, verify system functionality, and restore the base operations of an existing industrial vacuum oven.

Quotes are due by September 8 at 1:00 PM CST.

Please read quote submission instructions in full on the Solicitation Form 1449.