Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity was posted on September 28, 2012. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

220 Volt Transformers

Awarded
F2P3E92165A0020000Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335311
New
International
Design, Supply and Installation of the STATCOM
Solicitation # 25065
The British Columbia Hydro and Power Authority is conducting a Request for Information under solicitation number 25065 for the design, supply, and installation of a Static Synchronous Compensator (STATCOM) solution. This initiative is intended to support a major load project for a large industrial customer located within the North Thompson and Nicola regions of British Columbia. The project scope involves the design, factory simulation testing, supply, and installation of four STATCOMs at both new and existing substations. Technical requirements specify that equipment must be 24 MVAR or above with a base voltage of 138kV, and the STATCOM controller must be fully compatible with an existing 20-year-old ABB controller for a coordinated operation period of six to eight months. The procurement requires adherence to North American Standards, specifically IEEE C57.12.00 and CSA C88, with seismic qualification according to IEEE 693. Key deliverables include testing and commissioning, on-site training with manuals, and the provision of spare parts and special tools. This current process is for information gathering only and does not constitute a pre-qualification or shortlisting event. BC Hydro intends to issue a formal Request for Proposal in the second quarter of 2027, with a target contract award in the fourth quarter of 2027. Responses must be submitted electronically via BC Bid or to the designated contact, Man Kit Suen, by the deadline of November 17, 2026.
British Columbia Hydro and Power Authority

POSTED

about 19 hours ago

DEADLINE

in 28 days
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY-SWITCH,
Solicitation # SPE4A6-27-T-5391
Solicitation SPE4A6-27-T-5391 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of four electrical switch cable assemblies, identified by NSN 6150-01-733-1778. The items are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of August 18, 2027, and a need ship date of March 21, 2027. The contract specifies a delivery period of 144 days and requires FOB Origin terms. Compliance requirements are stringent, including mandatory adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with a specific requirement for a cap or plug on one end of the assembly. Quality assurance must meet ISO 9001:2015 standards, and origin inspection is required. Due to the nature of the technical data, eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA authorization to access export-controlled data subject to ITAR or EAR regulations. The procurement incorporates various FAR and DFARS clauses, including those regarding the Buy American Act and the Berry Amendment. A price evaluation preference is available for certified HUBZone small businesses. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by October 27, 2026, and should be submitted via the DLA-BSM Internet Bid Board System.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE4A6-27-T-5390
Solicitation SPE4A6-27-T-5390, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of three branched wiring harnesses (NSN 6150-01-676-3571). The items must be delivered with caps and plugs, coiled to 10 x 10, and shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The delivery window is 160 days after the order, with a need ship date of April 6, 2027. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance requires sampling per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical data is subject to ITAR and EAR export controls, and the contractor must comply with CMMC Level 2 and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation is based on price, with a specific preference for certified HUBZone small businesses. Offers utilizing additive manufacturing are ineligible for award. The procurement also incorporates standard FAR and DFARS clauses regarding the Buy American Act, the Berry Amendment, and prohibitions on covered defense telecommunications equipment. Item Unique Identification is not required for this specific order.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-27-T-1087
Solicitation SPE7M1-27-T-1087 is a request from the DLA Weapons Support Maritime Supply Chain for the procurement of eight power transformers (NSN 6120-01-595-7610). The items are identified as Commercial Off The Shelf (COTS) and must be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is September 20, 2025, with a need ship date of August 19, 2025. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS), and the procurement may be subject to automated award. The contract mandates strict adherence to military standards for packaging, marking, and preservation, specifically MIL-STD-2073-1E, MIL-STD-129, and MIL-E-17555. Technical and quality requirements are governed by RA001 and the DLA Master List, while RQ011 requires the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination per FAR 52.246-2. Invoicing must be processed electronically through the Wide Area WorkFlow (WAWF) system. Compliance requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must provide representations regarding covered defense telecommunications equipment and safeguarding covered defense information per DFARS 252.204-7012. While the NAICS code is 335311, the solicitation utilizes a HUBZone price evaluation preference. Alternate offerors are required to submit a complete data package for any proposed alternate parts.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 10 days
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-27-T-5392
Solicitation SPE4A6-27-T-5392 is issued by the Defense Logistics Agency for the procurement of one special purpose electrical cable assembly, identified by NSN 6150-01-564-6021. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a delivery window of 411 days after order and a required delivery date of October 31, 2027. The procurement is conducted under the First Destination Transportation program, with both inspection and acceptance occurring at the origin. Compliance requirements are stringent, necessitating that manufacturers maintain an ISO 9001:2015 certified quality system. Technical data is subject to ITAR or EAR export controls, requiring offerors to possess an approved US/Canada Joint Certification Program certification. Quality assurance involves zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and the contract mandates Contractor First Article Testing with a 14-day notice to the government prior to shipment. Packaging must adhere to MIL-STD-2073-1E and specific drawing requirements, while marking must comply with MIL-STD-129. The award process includes a price evaluation preference for SBA-certified HUBZone small businesses and may favor offers with shorter delivery timelines. The contract incorporates various FAR and DFARS clauses, including those for the Buy American Act, Berry Amendment compliance, and NIST SP 800-171 cybersecurity assessment requirements. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The 48th Civil Engineering Squadron is requesting quotes for the procurement of 1,460 220-volt, 2000-watt transformers to be delivered to RAF Feltwell in the United Kingdom. The requirement is split into two shipments of 730 units each, with the first due within 45 days and the second within 70 days after the contract award. While the Douglas MT 95WS/U is the preferred model, equal alternatives are acceptable provided they meet all technical specifications and safety standards. Award will be granted to the lowest priced technically acceptable offeror. To be eligible, companies must be registered in the System for Award Management and enrolled in Wide Area Workflow, which is the only accepted method for invoicing. Quotes must be all-inclusive of transportation and labor, submitted in either US Dollars or British Pounds Sterling, and include the offeror's CAGE code and DUNS number.

General Info

Agency

N/A

Contract Value

$166,479.98

NAICS

335311 - Power, Distribution, and Specialty Transformer Manufacturing

Place of Performance

RAF Lakenheath, Brandon, IP27 9PN, USA

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyN/A
Contacts2 people available
OfficeN/A
Organization / Agency
N/A
Office AddressN/A
Contacts
Christopher Rene DavalosContract Specialist
Hazel N LongContract Specialist

Full Description

Show more
Combined Synopsis/Solicitation RFQ -220 Volt Transformers - Reference (F2P3E92165A0020000) Requesting Agency: 48th Civil Engineering Squadron - 48 CES/CEACF RAF Lakenheath, Brandon, Suffolk, IP27 9PN, United Kingdom Purchasing Agency: 48th Contracting Squadron - 48 CONS/LGCB RAF Lakenheath, Brandon, Suffolk, IP27 9PN, United Kingdom This is a combined synopsis/solicitation for a commercial item prepared in accordance with the format in FAR Subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; quotes are being requested and a written solicitation will not be issued This solicitation is issued as a request for quotation IAW FAR Part 12, 13 and 15. Submit written quotes in reference to Request for Quote (RFQ) reference number F2P3E92165A0020000. ***To be considered for award, you or your company must be registered or prepared to register in the System for Award Management (SAM) system as well as enrolled in Wide Area Workflow (WAWF) for purpose of invoice/payment if awarded the contract. Please note that WAWF is the ONLY ACCEPTABLE means of invoicing for payment. If the offerer does not agree to register/use these DOD systems they will not be considered for award. Offerers should provide their DUNS number, CAGE code, and confirmation of their registration in WAWF along with their quote. *** Due to the overseas location of this solicitation, no set-aside will be used. The NAICS code for this requirement is 335311 (Power, Distribution, and Specialty Transformer Manufacturing). This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2005-60 dated 27-August-2012 and Defense Federal Acquisition Regulation DPN 20120829 effective 29 August 2012 BID SCHEDULE: Potential Offerors are to provide a quote for the commodities listed below: o Quote shall include a unit and total price for the following bid schedule: � 0001 - 220 volt Transformer , 2000 watt , Quantity: 730 each Unit Price per Transformer: � Total Price: � o Preferred Model: Douglas MT 95WS/U "or equal" o Delivery of First Shipment of items must be within 45 days after delivery of contract (ADC) o Must meet specifications stated on attached spec spreadsheet � 0002 - 220 volt Transformer , 2000 watt , Quantity: 730 each Unit Price per Transformer: � Total Price: � o Preferred Model: Douglas MT95 WS/U "or equal" o Delivery of Second shipment must be within 70 days ADC o Must meet specifications stated on attached spec spreadsheet The following clauses and provisions apply to this solicitation and are included by reference: Federal Acquisition Regulation (FAR) Provisions: 52.209-2 Prohibition on Contracting with Inverted Domestic Corporations-Representation 52.211-6 Brand Name or Equal 52.212-1 Instructions to Offerors-Commercial Items 52.215-5 Facsimile Proposals Federal Acquisitions Regulation (FAR) Clauses: 52.204-4 Printed or Copied Doubled-Sided on Recycled Paper 52-204-99 System for Award Management Registration (DEVIATION) 52.229-6 Taxes - Foreign Fixed Price Contracts 52.232-1 Payments 52.232-8 Discounts for Prompt Payment 52.232-17 Interest 52.233-1 Disputes Department of Defense Federal Acquisition Regulations (DFAR): 252.203-7002 Requirement to Inform Employees of Whistleblower Rights 252.209-7001 Disclosure of Ownership or Control by the Gov't of a Terrorist Country 252.209-7004 Subcontracting w/Firms that are Owned or Controlled by the Gov't of a Terrorist Country 252.225-7041 Correspondence in English 252.225-7042 Authorization to Perform 252.229-7000 Invoices Exclusive of Taxes or Duties 252.229-7006 Value Added Tax Exclusion (United Kingdom) 252.229-7007 Verification of United States Receipt of Goods 252.229-7008 Relief of Import Duty (United Kingdom) 252.232-7003 Electronic Submission of Payment Requests and Receiving Reports 252.232-7008 Assignment of Claims (Overseas) 252.232-7010 Levies on Contract Payments 252.233-7001 Choice of Law (Overseas) Air Force Federal Acquisition Regulations (AFFAR): 5352.225-9004 Submission of Offers in other than United States Dollars The full text of the FAR, DFAR, and AFFARS can be accessed on the Internet at http://farsite.hill.af.mil **Please note any references to Central Contractor Registration (CCR) should now state System for Award Management (SAM)** 52.209-5 - Certification Regarding Responsibility Matters (Apr 2010) (a) (1) The Offeror certifies, to the best of its knowledge and belief, that -- (i) The Offeror and/or any of its Principals -- (A) Are [_] are not [_] presently debarred, suspended, proposed for debarment, or declared ineligible for the award of contracts by any Federal agency; (B) Have [_] have not [_], within a three-year period preceding this offer, been convicted of or had a civil judgment rendered against them for: commission of fraud or a criminal offense in connection with obtaining, attempting to obtain, or performing a public (Federal, State, or local) contract or subcontract; violation of Federal or State antitrust statutes relating to the submission of offers; or commission of embezzlement, theft, forgery, bribery, falsification or destruction of records, making false statements, tax evasion, violating Federal criminal tax laws, or receiving stolen property (if offeror checks "have", the offeror shall also see 52.209-7, if included in this solicitation); and (C) Are [_] are not [_] presently indicted for, or otherwise criminally or civilly charged by a governmental entity with, commission of any of the offenses enumerated in paragraph (a)(1)(i)(B) of this provision; and (D) Have [_], have not [_], within a three-year period preceding this offer, been notified of any delinquent Federal taxes in an amount that exceeds $3,000 for which the liability remains unsatisfied. (1) Federal taxes are considered delinquent if both of the following criteria apply: (i) The tax liability is finally determined. The liability is finally determined if it has been assessed. A liability is not finally determined if there is a pending administrative or judicial challenge. In the case of a judicial challenge to the liability, the liability is not finally determined until all judicial appeal rights have been exhausted. (ii) The taxpayer is delinquent in making payment. A taxpayer is delinquent if the taxpayer has failed to pay the tax liability when full payment was due and required. A taxpayer is not delinquent in cases where enforced collection action is precluded. (2) Examples. (i) The taxpayer has received a statutory notice of deficiency, under I.R.C. �6212, which entitles the taxpayer to seek Tax Court review of a proposed tax deficiency. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek Tax Court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (ii) The IRS has filed a notice of Federal tax lien with respect to an assessed tax liability, and the taxpayer has been issued a notice under I.R.C. �6320 entitling the taxpayer to request a hearing with the IRS Office of Appeals contesting the lien filing, and to further appeal to the Tax Court if the IRS determines to sustain the lien filing. In the course of the hearing, the taxpayer is entitled to contest the underlying tax liability because the taxpayer has had no prior opportunity to contest the liability. This is not a delinquent tax because it is not a final tax liability. Should the taxpayer seek tax court review, this will not be a final tax liability until the taxpayer has exercised all judicial appeal rights. (iii) The taxpayer has entered into an installment agreement pursuant to I.R.C. �6159. The taxpayer is making timely payments and is in full compliance with the agreement terms. The taxpayer is not delinquent because the taxpayer is not currently required to make full payment. (iv) The taxpayer has filed for bankruptcy protection. The taxpayer is not delinquent because enforced collection action is stayed under 11 U.S.C. 362 (the Bankruptcy Code). (ii) The Offeror has [[_] has not [_], within a three-year period preceding this offer, had one or more contracts terminated for default by any Federal agency. (2) "Principal," for the purposes of this certification, means an officer; director; owner; partner; or a person having primary management or supervisory responsibilities within a business entity (e.g., general manager; plant manager; head of a division or business segment; and similar positions). This Certification Concerns a Matter Within the Jurisdiction of an Agency of the United States and the Making of a False, Fictitious, or Fraudulent Certification May Render the Maker Subject to Prosecution Under Section 1001, Title 18, United States Code. (b) The Offeror shall provide immediate written notice to the Contracting Officer if, at any time prior to contract award, the Offeror learns that its certification was erroneous when submitted or has become erroneous by reason of changed circumstances. (c) A certification that any of the items in paragraph (a) of this provision exists will not necessarily result in withholding of an award under this solicitation. However, the certification will be considered in connection with a determination of the Offeror's responsibility. Failure of the Offeror to furnish a certification or provide such additional information as requested by the Contracting Officer may render the Offeror nonresponsible. (d) Nothing contained in the foregoing shall be construed to require establishment of a system of records in order to render, in good faith, the certification required by paragraph (a) of this provision. The knowledge and information of an Offeror is not required to exceed that which is normally possessed by a prudent person in the ordinary course of business dealings. (e) The certification in paragraph (a) of this provision is a material representation of fact upon which reliance was placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous certification, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation for default. (End of Provision) Addendum to FAR 52.212-1 Instructions to Offerors - Commercial Items As prescribed in FAR 12.302(d) the following addendum is provided for solicitation provision FAR 52.212-1 and hereby amends any language therein: Quotation Preparation Instructions: A. To assure the timely and equitable evaluation of quotations, vendors must follow the instructions contained herein. Vendors are required to meet all solicitation requirements, including terms and conditions, representations and certifications, and technical requirements, in addition to those identified as evaluation factors and if applicable, sub-factors. Quotations submitted in response to this Combined Synopsis/Solicitation must address the following evaluation factors which include a price quote and technical qualifications defined in paragraph B - Quote Specifics and 52.212-2 Evaluation-Commercial Items. B. Quote Specifics: All quotes must include the following information: 1. (Technical) The product description recommends a "Preferred Model" for purposes of defining the required specifications. If submitting an "or equal" product to the "preferred model," the quotation shall input the technical specifications for the product being offered in the attached spec sheet. 2. Vendor shall be prepared to enroll in SAM (www.sam.gov) & WAWF (https://wawf.eb.mil) before invoicing. 3. Discount for prompt payment - if any 4. Delivery Timeframe 5. (Price) Quotes shall be quoted in British Pounds Sterling (�) or United States Dollars ($) and shall be valid for a period of no less than 60 days. 6. Prices shall be all inclusive (i.e., all materials, transportation, labor, etc.). Payment is Net30 days. 7. Quote shall include delivery direct to destination. There shall be no shipping line item. It shall be inclusive in the item cost. 8. Complete copy of Offeror Representations and Certifications (located on pages 7-21) 9. Vendor shall input unit and total prices on pages 3 & 4 of combined synopsis/solicitation and return scanned/signed copies. C. Quotes are due to this office no later than 1:00p.m. British Summertime(8am Eastern Standard Time), 14 September 2012. Quotes may be faxed to 01638-52-2189, or sent via e-mail to SSgt Christopher Davalos, christopher.davalos@lakenheath.af.mil. AND Ms. Hazel Long, hazel.long@lakenheath.af.mil D. Vendors must clearly identify any exception to the solicitation terms and conditions and provide complete accompanying rationale. E. A complete delivery of the first shipment of units must be within 45 days after delivery of contract (ADC). Complete second delivery of second shipment of units must be within 70 days ADC. If vendor would like they can make one delivery of all units within 45 days ADC. Delivery of all items must be made Monday through Friday from 7:30 a.m. to 4:30p.m., to exclude all British and American holidays. All potential vendors are to provide proposals for the following supplies to be delivered FOB Destination to the address listed below: Building 73 Scampton Road RAF Feltwell Thetford Norfolk, England IP26 4HL (End Addendum) FAR 52.212-2 Evaluation - Commercial Items (Jan 1999) Award Basis: The Government's evaluation of quotations will fully account for the evaluation factors identified and required under 52.212-2 (b) of 1.) Technical Capability, 2.) Price. The evaluation of these factors will utilize an award basis that results in an award to the Lowest Priced Technically Acceptable (LPTA) quotation. Quotes that do not meet the stated minimum technical specifications will be deemed technically unacceptable, and therefore not considered for award. Quotations that are incomplete and/or are determined to be priced unreasonably too high or too low, may not be selected for award. Under the LPTA source selection process, trade-offs are not permitted, proposals are evaluated for acceptability but not ranked using the non-price factors. The Government intends to evaluate quotations and award a contract without exchanges or communications and therefore, quotations should contain the vendor's best terms, from a price, technical-specification. (a) Evaluation: Evaluation factors required under 52.212-1 will be evaluated by the Government as follows; i. Technical: The Government will evaluate technical requirements of quoted transformers on a pass/fail-basis, assigning ratings of acceptable, or unacceptable. Accordingly, under the LPTA evaluation process, vendor's who receive an unacceptable rating for this factor, may not be considered for award. Technical acceptability of quoted transformers shall be evaluated by the government in the following manner: 1) As brand-name, "or equal" transformers may be quoted by vendors, the Government's technical evaluation will first assess if related specifications meet the specifications of the Government's listed requirement, and respective salient characteristics (see attached table). If the associated specifications of "or equal" quoted transformers do not meet the Government's stated minimum specification, will result in the vendor's quotation being rated as technically "unacceptable" and therefore ineligible for award. 2) "Or equal" quotations that are determined to meet the listed minimum "physical/salient" technical specifications of the "brand name" item, will be evaluated to assess the acceptability of the safety, quality, and value (i.e. durability, reliability, efficiency) of the quoted transformer. The basis for safety/quality/value will be determined by means of: a) Comparison of the quoted transformer to previous purchases by the Government, and account for the Government's prior experience with such transformers, and/or, b) Comparison to consumer-oriented publications that independently report both test findings and results regarding performance. 3) Quoted "or-equal" items that are determined to be unsafe or substandard (e.g. short probable life and/or related inefficiencies), will be considered to represent either poor quality or poor value, and therefore, be rated as "unacceptable" and removed from consideration for award by the Government. The technical acceptability of quoted transformers will be assigned ratings of acceptable/unacceptable based upon the following: Rating Definition Acceptable The vendor's quoted item meets minimum technical requirements and is determined to reasonably represent an acceptable level of safety, quality, and value. Unacceptable The vendor's quoted item does not meet minimum technical requirements and/or is not determined to represent an acceptable level of safety, quality, and value. ii. Price: Quoted pricing by vendors will be verified by multiplying the quantities identified at the contract line item number (CLIN) level by the proposed unit price to confirm extended amounts. The total, aggregate quoted price for all items will be ultimately utilized for purpose of the Government's award determination. Comparison of quoted, competitive pricing by vendors will satisfy the requirement for establishing price fairness and reasonableness in accordance with FAR Part 13.106-3(a)(1). If a determination of fair and reasonable pricing cannot be established through adequate price competition, the Government may use additional price evaluation techniques in accordance with FAR Part 13.106-3(a)(2)(i thru vii) to determine price reasonableness. (b) Award Determination: As a result of the Government's aforementioned evaluation, only those vendors whose proposals are determined to be technically acceptable will be considered for award. Of those vendors found technically acceptable, award will be made to the lowest priced vendor whose price is determined reasonable and affordable. (End Provision) 52.212-3 Offeror Representations and Certifications -- Commercial Items (Feb 2012) An offeror shall complete only paragraphs (b) of this provision if the offeror has completed the annual representations and certificates electronically via https://www.acquisition.gov . If an offeror has not completed the annual representations and certifications electronically at the ORCA website, the offeror shall complete only paragraphs (c) through (o) of this provision. (a) Definitions. As used in this provision-- "Economically disadvantaged women-owned small business (EDWOSB) concern" means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States and who are economically disadvantaged in accordance with 13 CFR part 127. It automatically qualifies as a women-owned small business eligible under the WOSB Program. "Forced or indentured child labor" means all work or service- (1) Exacted from any person under the age of 18 under the menace of any penalty for its nonperformance and for which the worker does not offer himself voluntarily; or (2) Performed by any person under the age of 18 pursuant to a contract the enforcement of which can be accomplished by process or penalties. "Inverted domestic corporation," as used in this section, means a foreign incorporated entity which is treated as an inverted domestic corporation under 6 U.S.C. 395(b), i.e., a corporation that used to be incorporated in the United States, or used to be a partnership in the United States, but now is incorporated in a foreign country, or is a subsidiary whose parent corporation is incorporated in a foreign country, that meets the criteria specified in 6 U.S.C. 395(b), applied in accordance with the rules and definitions of 6 U.S.C. 395(c). An inverted domestic corporation as herein defined does not meet the definition of an inverted domestic corporation as defined by the Internal Revenue Coe at 26 U.S.C. 7874. "Manufactured end product" means any end product in Federal Supply Classes (FSC) 1000-9999, except- (1) FSC 5510, Lumber and Related Basic Wood Materials; (2) Federal Supply Group (FSG) 87, Agricultural Supplies; (3) FSG 88, Live Animals; (4) FSG 89, Food and Related Consumables; (5) FSC 9410, Crude Grades of Plant Materials; (6) FSC 9430, Miscellaneous Crude Animal Products, Inedible; (7) FSC 9440, Miscellaneous Crude Agricultural and Forestry Products; (8) FSC 9610, Ores; (9) FSC 9620, Minerals, Natural and Synthetic; and (10) FSC 9630, Additive Metal Materials. "Place of manufacture" means the place where an end product is assembled out of components, or otherwise made or processed from raw materials into the finished product that is to be provided to the Government. If a product is disassembled and reassembled, the place of reassembly is not the place of manufacture. "Restricted business operations" means business operations in Sudan that include power production activities, mineral extraction activities, oil-related activities, or the production of military equipment, as those terms are defined in the Sudan Accountability and Divestment Act of 2007 (Pub. L. 110-174). Restricted business operations do not include business operations that the person (as that term is defined in Section 2 of the Sudan Accountability and Divestment Act of 2007) conducting the business can demonstrate- (1) Are conducted under contract directly and exclusively with the regional government of southern Sudan; (2) Are conducted pursuant to specific authorization from the Office of Foreign Assets Control in the Department of the Treasury, or are expressly exempted under Federal law from the requirement to be conducted under such authorization; (3) Consist of providing goods or services to marginalized populations of Sudan; (4) Consist of providing goods or services to an internationally recognized peacekeeping force or humanitarian organization; (5) Consist of providing goods or services that are used only to promote health or education; or (6) Have been voluntarily suspended. Sensitive technology- (1) Means hardware, software, telecommunications equipment, or any other technology that is to be used specifically- (i) To restrict the free flow of unbiased information in Iran; or (ii) To disrupt, monitor, or otherwise restrict speech of the people of Iran; and (2) Does not include information or informational materials the export of which the President does not have the authority to regulate or prohibit pursuant to section 203(b)(3) of the International Emergency Economic Powers Act (50 U.S.C. 1702(b)(3)). "Service-disabled veteran-owned small business concern"- (1) Means a small business concern- (i) Not less than 51 percent of which is owned by one or more service-disabled veterans or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more service-disabled veterans; and (ii) The management and daily business operations of which are controlled by one or more service-disabled veterans or, in the case of a service-disabled veteran with permanent and severe disability, the spouse or permanent caregiver of such veteran. (2) Service-disabled veteran means a veteran, as defined in 38 U.S.C. 101(2), with a disability that is service-connected, as defined in 38 U.S.C. 101(16). "Small business concern" means a concern, including its affiliates, that is independently owned and operated, not dominant in the field of operation in which it is bidding on Government contracts, and qualified as a small business under the criteria in 13 CFR Part 121 and size standards in this solicitation. "Subsidiary" means an entity in which more than 50 percent of the entity is owned- (1) Directly by a parent corporation; or (2) Through another subsidiary of a parent corporation. "Veteran-owned small business concern" means a small business concern- (1) Not less than 51 percent of which is owned by one or more veterans(as defined at 38 U.S.C. 101(2)) or, in the case of any publicly owned business, not less than 51 percent of the stock of which is owned by one or more veterans; and (2) The management and daily business operations of which are controlled by one or more veterans. "Women-owned business concern" means a concern which is at least 51 percent owned by one or more women; or in the case of any publicly owned business, at least 51 percent of the its stock is owned by one or more women; and whose management and daily business operations are controlled by one or more women. "Women-owned small business concern" means a small business concern -- (1) That is at least 51 percent owned by one or more women or, in the case of any publicly owned business, at least 51 percent of the stock of which is owned by one or more women; and (2) Whose management and daily business operations are controlled by one or more women. "Women-owned small business (WOSB) concern eligible under the WOSB Program (in accordance with 13 CFR part 127)," means a small business concern that is at least 51 percent directly and unconditionally owned by, and the management and daily business operations of which are controlled by, one or more women who are citizens of the United States. (b) (1) Annual Representations and Certifications. Any changes provided by the offeror in paragraph (b)(2) of this provision do not automatically change the representations and certifications posted on the Online Representations and Certifications Application (ORCA) website. (2) The offeror has completed the annual representations and certifications electronically via the ORCA website accessed through https://www.acquisition.gov . After reviewing the ORCA database information, the offeror verifies by submission of this offer that the representation and certifications currently posted electronically at FAR 52.212-3, Offeror Representations and Certifications-Commercial Items, have been entered or updated in the last 12 months, are current, accurate, complete, and applicable to this solicitation (including the business size standard applicable to the NAICS code referenced for this solicitation), as of the date of this offer and are incorporated in this offer by reference (see FAR 4.1201), except for paragraphs ____________. [Offeror to identify the applicable paragraphs at (c) through (o) of this provision that the offeror has completed for the purposes of this solicitation only, if any. These amended representation(s) and/or certification(s) are also incorporated in this offer and are current, accurate, and complete as of the date of this offer. Any changes provided by the offeror are applicable to this solicitation only, and do not result in an update to the representations and certifications posted electronically on ORCA.] (c) Offerors must complete the following representations when the resulting contract is to be performed in the United States or its outlying areas. Check all that apply. (1) Small business concern. The offeror represents as part of its offer that it [_] is, [_] is not a small business concern. (2) Veteran-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a veteran-owned small business concern. (3) Service-disabled veteran-owned small business concern. [Complete only if the offeror represented itself as a veteran-owned small business concern in paragraph (c)(2) of this provision.] The offeror represents as part of its offer that it [_] is, [_] is not a service-disabled veteran-owned small business concern. (4) Small disadvantaged business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents, for general statistical purposes, that it [_] is, [_] is not, a small disadvantaged business concern as defined in 13 CFR 124.1002. (5) Women-owned small business concern. [Complete only if the offeror represented itself as a small business concern in paragraph (c)(1) of this provision.] The offeror represents that it [_] is, [_] is not a women-owned small business concern. Note: Complete paragraphs (c)(8) and (c)(9) only if this solicitation is expected to exceed the simplified acquisition threshold. (6) WOSB concern eligible under the WOSB Program. [Complete only if the offeror represented itself as a women-owned small business concern in paragraph (c)(5) of this provision.] The offeror prepresents that- (i) It [_] is, [_] is not a WOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(6)(i) of this provision is accurate in reference to the WOSB concern or concerns that are participating in the joint venture. [The offeror shall enter the name or names of the WOSB concern or concerns that are participating in the joint venture: _________.] Each WOSB concern participating in the joint venture shall submit a separate signed copy of the WOSB representation. (7) Economically disadvantaged women-owned small business (EDWOSB) concern. [Complete only if the offeror represented itself as a WOSB concern eligible under the WOSB Program in (c)(6) of this provision.] The offeror represents that- (i) It [_] is, [_] is not an EDWOSB concern eligible under the WOSB Program, has provided all the required documents to the WOSB Repository, and no change in circumstances or adverse decisions have been issued that affects its eligibility; and (ii) It [_] is, [_] is not a joint venture that complies with the requirements of 13 CFR part 127, and the representation in paragraph (c)(7)(i) of this provision is accurate in reference to the EDWOSB concern or concerns that are participating in the joint venture. The offeror shall enter the name or names of the EDWOSB concern or concerns that are participating in the joint venture: _____________. Each EDWOSB concern participating in the joint venture shall submit a separate signed copy of the EDWOSB representation. (8) Women-owned business concern (other than small business concern). [Complete only if the offeror is a women-owned business concern and did not represent itself as a small business concern in paragraph (c)(1) of this provision.]. The offeror represents that it [_] is, a women-owned business concern. (9) Tie bid priority for labor surplus area concerns. If this is an invitation for bid, small business offerors may identify the labor surplus areas in which costs to be incurred on account of manufacturing or production (by offeror or first-tier subcontractors) amount to more than 50 percent of the contract price: ___________________________________________ (10) [Complete only if the solicitation contains the clause at FAR 52.219-23, Notice of Price Evaluation Adjustment for Small Disadvantaged Business Concerns, or FAR 52.219-25, Small Disadvantaged Business Participation Program-Disadvantaged Status and Reporting, and the offeror desires a benefit based on its disadvantaged status.] (i) General. The offeror represents that either- (A) It [_] is, [_] is not certified by the Small Business Administration as a small disadvantaged business concern and identified, on the date of this representation, as a certified small disadvantaged business concern in the CCR Dynamic Small Business Search database maintained by the Small Business Administration , and that no material change in disadvantaged ownership and control has occurred since its certification, and, where the concern is owned by one or more individuals claiming disadvantaged status, the net worth of ...

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS