This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 24, 2007. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

23 -- Hoist Vacuum

Closed

Reference-Number-F1Y3DA7200A003Federal

Submission Closed08/31/2007, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

SLED

Portable Asphalt Recycling Machine with Trailer

Solicitation # 601440000054423

The Texas Department of Transportation is soliciting bids for the procurement of a Portable Asphalt Recycling Machine with Trailer under solicitation number 601440000054423. This procurement is managed by the agency in Texas and utilizes the National Institute of Governmental Purchasing (NIGP) code to standardize purchases and select vendors from the Centralized Master Bidders List. The primary point of contact for this requirement is Brian Jordan. Interested respondents must register and submit their proposals through the TxDOT Procurement Portal via the Euna Procurement website. The deadline for submittals is November 11, 2026, at 21:00 UTC, and responses will not be accepted after this time. All official updates, including addendums and question-and-answer documents, will be posted on the procurement website, which respondents are advised to monitor closely.

Texas Department of Transportation

POSTED

DEADLINE

Hull & Structural Steel Fabrication and RepairThis subcontract, titled Hull and Structural Steel Fabrication and Repair, involves performing critical steelwork for the USCGC BARBARA MABRITY under the Department of Homeland Security. The scope of work includes the cropping and renewal of corroded steel plating in various weights, as well as structural weld repairs specifically targeting cracked welds within the engine room demisters and the bow thruster room. The project is designated as a total Small Business Set Aside under NAICS code 333120. To ensure the integrity of the structural repairs, all work must adhere to strict welding certifications per SFLC Standard Specification 0740 and NAVSEA TP 1688. The contract was posted on October 19, 2026, with a response deadline of November 6, 2026.

POSTED

DEADLINE

BULLDOZER FOR SHIPROCK FIELD OFFICEThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the procurement of a bulldozer to support the Shiprock Field Office. This requirement is categorized under NAICS code 333120, which pertains to agricultural and forestry machinery and equipment manufacturing. The forecast was posted on October 18, 2026, and serves as a notification of upcoming procurement needs. Interested parties may coordinate with the Small Business Program Managers, Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

MMO T-LINES PURCHASE TWO NEW BOBCAT SKIDSTEEERS UNITS, EO 14398The Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the procurement of two new Bobcat skid steer units under EO 14398. This acquisition is categorized under NAICS code 333120, which pertains to the manufacturing of agricultural and forestry machinery. The forecast was posted on October 18, 2026, and is managed by the Small Business Program Managers. Interested parties can find further details through the Department of Energy's public acquisition forecast.

Western Area Power Administration

POSTED

DEADLINE

Supply and Delivery of a Ride-on Trencher

Solicitation # RFQ 26-0487

The City of Saskatoon has issued solicitation RFQ 26-0487 for the supply and delivery of a new, factory-installed ride-on trencher. The procurement process is based on the lowest total price among qualified bidders. To be considered, respondents must be a single legal entity, registered on the City's electronic bidding system, and pass a three-stage evaluation consisting of a mandatory submission review, a technical requirements assessment, and a final pricing score. The equipment must meet all Canadian federal, provincial, and municipal safety standards for roadway operation, featuring tempered safety glass with UV protection, a minimum tractor weight of 4,400 kg, a hydraulic tank capacity of at least 95 L, and antifreeze rated for -40 degrees Celsius or colder. Reference models such as the Ditch Witch RT125 and Vermeer RTX1250 are noted as acceptable. The successful supplier is required to provide a thorough pre-delivery inspection report to City of Saskatoon Fleet Management and deliver the unit to 75 King Street, Saskatoon. Deliverables include an operator's manual, a parts manual, and a service manual, along with onsite operator and mechanic training at no additional cost. The contractor must ensure parts availability and service support for at least ten years from the delivery date. Administrative requirements include maintaining a minimum of 2,000,000 dollars in commercial general liability insurance as a pre-condition of award and ensuring all invoices and packing slips reference the purchase order number. All submissions must be uploaded in a fixed format to the bidding portal by November 20, 2026, at 2:00:59 PM CST.

POSTED

DEADLINE

BRUSH SECTION, ROTARY S

Solicitation # SPE7L1-27-T-0112

Solicitation SPE7L1-27-T-0112 is a fixed-price request for quotations issued by the Defense Logistics Agency Land Supply Chain for the procurement of 21 rotary sweeper brush sections. The required items are identified as Caterpillar Inc part number 157-2556 and NSN 3825-01-626-0365. Delivery is required within 20 days after order, with an original required delivery date of August 10, 2026. The terms are FOB Destination, with both inspection and acceptance occurring at the destination. Shipping is directed to the Naval Mobile Construction Battalion at Seabee Camp Shields, with specific addresses provided for both parcel post in FPO AP and freight in Chibana, Okinawa, Japan. The procurement is governed by NAICS code 333120 and requires strict adherence to the Buy American Act and Berry Amendment. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Contractors are required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. All quotes must be submitted via the DLA Internet Bid Board System by October 15, 2026. Additional compliance mandates include DFARS cybersecurity standards for safeguarding covered defense information and the prohibition of additive manufacturing unless specifically authorized.

POSTED

DEADLINE

Supply of Compact Electric Drive Wheel Loader

Solicitation # RFQ-27-052

Okanagan College is soliciting competitive quotations under RFQ-27-052 for the supply of one Compact Electric Drive Wheel Loader to support a training course for Red Seal technicians specializing in electric vehicles. The equipment, which can be new or used with a preference for units having fewer than 100 operating hours, must be delivered to the Kelowna Campus Central Receiving by December 9, 2026. The vehicle must be built to SAE standards and comply with the BC Motor Vehicle Act, the Federal Motor Vehicle Safety Act, and WorkSafe BC Regulations, and it must be delivered with a current Commercial Vehicle inspection certificate. The award will be granted to the compliant respondent offering the lowest price following a three-stage evaluation process consisting of a review of mandatory submission requirements, a technical requirements assessment, and a pricing evaluation. All-inclusive pricing must cover labor, materials, insurance, delivery, and installation. Interested suppliers must submit their quotations electronically via the specified bidding portal by November 9, 2026, including a completed submission form, pricing form, specification form, and a detailed warranty statement. The anticipated execution date for the agreement is November 16, 2026.

POSTED

DEADLINE

Solicitation H-26-312W is issued by the Arkansas Department of Transportation Equipment and Procurement for the acquisition of snowplows and spreaders. This SLED organization opportunity is based in the state of Arkansas and is currently open for responses. The solicitation was posted on October 15, 2026, and requires all submissions to be completed by the response deadline of November 3, 2026, at 5:00 PM. Interested parties can find further details and submission guidelines through the provided Bid Express link.

Arkansas Department of Transportation - Equipment and Procurement

POSTED

DEADLINE

Airfield Snow and Ice Control Equipment SupplyThis small business set-aside subcontract, managed by the Department of Defense through W6QM Micc-Ft Drum, focuses on the supply of heavy machinery for prime contractors working on MICC projects. The scope of work involves providing specialized airfield snow and ice control equipment, specifically snow brooms, roll-over plows, 5YD and 3YD loaders, and liquid trucks. All delivered machinery must strictly adhere to military airfield specifications and is defined under CLINs AET01 through AET05. The contract is categorized under NAICS code 333120 and is designated for performance in the 13602 zip code area. It was posted on October 15, 2026, with a response deadline set for October 14, 2031. This long-term procurement effort ensures that critical infrastructure equipment is available to maintain operational readiness for military airfield snow and ice management.

POSTED

DEADLINE

Tracked Crawler Carrier SupplierThis subcontract agreement establishes the supply of three purpose-built utility crawler carriers to support prime contractors working on projects for the Alaska Department of Transportation and Public Facilities. Each unit must meet rigorous technical specifications, including a minimum of 255 HP, a 6.7L engine displacement, a two-speed hydrostatic transmission, and zero-turn capability to ensure operational efficiency in demanding environments. To ensure operator safety and comfort, the carriers are required to feature enclosed ROPS/FOPS certified cabs equipped with heating and air conditioning. Additionally, each vehicle must be outfitted with hydraulic front winches. This procurement falls under NAICS code 333120 and is managed through the State of Alaska.

Transportation and Public Facilities

POSTED

DEADLINE

146489 Headworks Reservoir - GF10000PW Electric Mixer Replacement

Solicitation # 232480

The City of Los Angeles Department of Water and Power is seeking bids for the Headworks Reservoir GF10000PW Electric Mixer Replacement project. This solicitation, identified by number 232480, falls under NAICS code 333120 and will be performed in Los Angeles, California. Interested parties should coordinate with the point of contact, Jamie L. Vasquez, for further inquiries. The deadline for responses is November 3, 2026, at 10:00 PM UTC. All bids must be submitted electronically through the Electronic Request Solicit Procure system, as hard copy or mail-in submissions will not be accepted. Detailed submittal requirements are available within the official bid documentation.

POSTED

DEADLINE

SEF2495 Tracked Drill Rig and Tracked Flatbed

Solicitation # 225556

The State of Alaska Department of Transportation and Public Facilities, HQ State Equipment Fleet, is soliciting bids for the one-time purchase of one heavy-duty mechanical geotechnical tracked drill rig and two tracked flatbeds equipped with hydraulic hook lifts. The drill rig must be capable of rotary drilling, auger drilling, rock coring, and soil sampling, professionally mounted to a crawler carrier such as a Terramac RT9U or an approved equivalent. Key technical requirements include a minimum 255 HP engine and 44,180 lb GVWR for the carrier, a 32,500 lb minimum push force and 3.5 inch spindle bore for the drill, and a 20,000 lb minimum capacity for the hook lift. All equipment must be new, current-production models, painted OEM Standard Yellow, and include a GPS tracking system with a three-year subscription. The contract will be awarded to the lowest responsive and responsible bidder. Bidders may qualify for various preferences, including Alaska Product Preferences (3% to 7%), Local Agricultural and Fisheries Products Preference (7%), and Alaskans with Disabilities Preference (10%). Bids must be submitted by November 6, 2026, at 2:30 PM, with requests for amendments due by October 28, 2026. Delivery is required within a maximum of 180 days after receipt of order, with the FOB point located at dockside Seattle/Tacoma. The agreement includes a 12-month lemon clause, a requirement for prices to remain firm for 180 days after bid opening, and a 30-day notice period for cancellation for convenience by the state. Payment for agreements under $500,000 will be processed within 30 days of receipt of a proper invoice and delivery.

Transportation and Public Facilities

POSTED

5 days ago

DEADLINE

N/A

General Info

Agency

Department Of Defense → FA4613 90 Cons Pk

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

90 CONSATTN: Martin Wallace 7505 Marne Loop Cheyenne, WY 82009, WY

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

1 update

PhaseClosed

PostedAug 20

Combined Synopsis

Notice updatedAug 24

The notice description changed.

Response DeadlineAug 31

Deadline has passed

Submission Closed

08/31/2007, 05:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA4613 90 Cons Pk

Contacts1 person available

OfficeFE WARREN AFB, WY, 82005-2860, USA

Organization / AgencyDepartment Of Defense → FA4613 90 Cons Pk

Office AddressFE WARREN AFB, WY, 82005-2860, USA

Contacts

Martin W WallaceContract Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

This is a combined Synopsis solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6 as supplemented with additional information included in this notice. This announcement constitutes the only solicitation, quotes are being requested and a written solicitation will not be issued. The solicitation is set aside 100% for small business. The NAICS is 333120. The Small Business Size Standard is 750 employees. This requirement is for a VACstar Model VS500 Hoist vacuum (or Equal) Specs are as follows: Water Pressure: PSI/GPM 2000PSI/4 GPM, 2-stage washable filter 5 microns Spoils tank 535 gal, Water tank capacity 250 gal.Standard Accessories: 1. 1, 5 ft. long high pressure orbital tip pothole wand (also for equipment cleanup 2. 1, 5 ft. long high pressure zero degree tip cutting wand 3. 2, 15 ft. length of 3 inches diameter camlock vacuum hose. 4. 1, 5 ft. long PVC vacuum tube 5. 1, 6 ft. long 4 inches diameter discharge hose 6. 1, 3 Inches to 4inches camlock discharge adapter 7. 2, Splash face shield 8. 1, Splash shield box with ring 9. 10inches x 9inches x 24inches aluminum tool box (for operations manuals, face shields, 3 inches to 4 inches discharge adapter, hydraulic hoist control, etc.) 10. Amber safety strobe light Product Specification ? Portable, Self-contained, Trailer mounted, Hydro Vacuum Unit Power Plant-Kubota #1105-E, 28 horsepower diesel (plus turbo charger), water cooled Vacuum System -Spoils Tank Capacity 500 gallons tank to be constructed of 1/4 inch thick steel -Single hydraulic cylinder hoist to facilitate emptying -Rotary vane, positive displacement vacuum pump -vacuum and pressure capabilities 22 in/hg vacuum 10 to 15 psi pressure -capability to pressurize vacuum hose to unplug clogged hose -capability to pressurize slurry tank to unload contents -capability to vacuum at depth of approx. 35 feet (sea level) -capability to vacuum at distance of 200 feet -Combination vacuum/pressure gauge-vacuum and pressure relief valves -Agitation/mixing jets in slurry tank -Primary and secondary stainless steel ball check valve to safeguard filter and vac pump -5 micron washable polyester filter -30 feet of 3inches diameter camlock vacuum hose -5 foot vacuum wand PVC non conductive Fresh Water System -Fresh water capacity 250 gallon total 125 gallon poly tank on each fender -CAT water pump 2,500 psi at 4.5 gallons per minute -Low water shut down switch -Fresh water filter -Antifreeze kit (for winterization) -Tank drain valve-Hand/equipment wash faucet -50 feet of 3,000 psi hose with quick connect female end -100 feet capacity hose real with drag, tension latch and locking latch -2 water wands, each 5 feet long 1 orbital tip 1 zero degree tip Trailer -12,000 lb. GVW capacity -Weight balanced trailer -Tandem Dexter Torflex axles, with load range E tires (LT 235/85R 16) -12,000 lb., adjustable drop leg jack with side wind handle -DOT lighting and reflective tape -Electric brakes, breakaway kit, registration holder -Pintle Hitch -6 hole electrical connector -Amber safety strobe light If the product does not meet the required specifications at delivery, the equipment will be picked up by the contractor at his/her expense and no payment will be made on the purchase order. You may contact SrA Martin Wallace at 307-773-4739 or at Martin.wallace@warren.af.mil for any questions. Quotes are being solicited for planning purposes only. Should sufficient funds become available, the government intends to award a Purchase Order. If funds do not become available by 30 Sep 2007 no award will be made. The following clauses will apply to this solicitation and will be transferred into the award. We reserve the right to put clauses into the award that are not in the solicitation with notice to the selected contractor. The full text of these clauses may be accessed electronincally at this address: www.arnet.gov/far 52.212-1 Instructions to Offerors--Commercial Items JAN 2006 52.212-3 Offeror Representations and Certification--Commercial Items JUN 2006 52.212-4 Contract Terms and Conditions--Commercial Items SEP 2005 52.212.5 Contract Terms and Conditions required to Implement States or Executive Orders--Commercial Items 252.204-7004 Alt A Central Contractor Registration (52.204-7) Alternate A. NOV 2003 252.212-7000 Offeror Representations and Certifications-Commercial Items JUN 2005 252.212-7001 Contract Terms and Conditions Required to Implement Statues or Executive Orders Applicable to Defense Acquisition of Commercial Items. 252.232-7003 Electronic Submission of payment requests(MAY 2006) 5352.223-9000 Elimination of use of class I ozone depleting substances (ODS) (APR 2003) QUOTES ARE DUE NLT THAN 2:00 PM MOUNTAIN DAYLIGHT TIME, 31 August 2007. You are encouraged to submit quotes electronically to martin.wallace@warren.af.mil. Quotes may also be submitted on letterhead and faxed to the attention of Martin Wallace Contract Administrator @ 307-773-4636. All offerors must complete on-line registration at the following sites: The requirement calls for contractors to be registered with the Central Contractor Registration (CCR) Http://www.ccr.gov. Purchase orders cannot be awarded to companies that are not registered in CCR Contractors must validate this information by also registering at http://orca.bpn.gov. Point of Contact SrA Martin Wallace, Contract Specialist, Phone 307-773-4739, Fax 307-773-4636, Email martin.wallace@warren.af.mil or Dutch Van Stockum , Team Lead/CO, Phone 307-773-4789, Fax 307-773-3964, Email Dutch.VanStockum@warren.af.mil