This Solicitation opportunity from Government of Canada was posted on February 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

23240-260350 Cross Section Polisher for electron microscopy sample preparation

Closed

WS5321204786International

Submission Closed09/22/2025, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516

New

International

Scientific pH and Environmental Probes SupplierThis subcontract opportunity is for the supply of scientific sensors and probes to support prime contractors working on Department of Fisheries and Oceans projects for the Government of Canada. The required equipment includes pH electrodes featuring Bayonet Neill-Concelman connectors, as well as modular sensors designed to measure temperature, oxygen, and salinity. To ensure precise scientific calibration, all probes must be capable of providing raw millivolt output. The successful supplier will be responsible for delivering a complete set of calibrated pH and environmental probes. Interested parties should note that the response deadline for this solicitation is November 26, 2026. The contract falls under NAICS code 334516 and involves performance within Canada.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

pH Control and Monitoring System ProviderThis subcontract opportunity is for a provider to supply automated pH and CO2 regulation systems along with high-frequency data acquisition systems for prime contractors working on Department of Fisheries and Oceans projects in Canada. The required systems must utilize dynamic feedback for CO2 bubbling control and be capable of simultaneous multiparameter measurements. To ensure durability in humid laboratory environments, the hardware must specifically support BNC connectors and raw mV output. The project focuses on the delivery of a modular pH control and monitoring system under NAICS code 334516. Interested parties must respond to the solicitation by November 26, 2026, to provide these specialized technical solutions for the Government of Canada.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

High-Pressure Liquid Chromatography (HPLC) System SupplierThis subcontract agreement involves the procurement of a complete and operational High-Pressure Liquid Chromatography (HPLC) system for prime contractors working on Texas A&M University AgriLife Research laboratory projects. The required hardware must include a quaternary pump, four inlet solvent filters, and HPLC columns with a 4.6 mm ID, 150 mm length, and 5 μm particle size. All delivered equipment must be new and meet or exceed the functional specifications of the Agilent Eclipse Plus. The opportunity was posted on November 10, 2026, with a response deadline of November 30, 2026. Classified under NAICS code 334516, the contract is managed by Texas A&M University. Interested parties can find further details and submission guidelines through the provided SciQuest procurement portal.

POSTED

DEADLINE

Solicitation # AG-RSCH-ITB-6628

Texas A&M AgriLife Research is soliciting bids for a turnkey HPLC system under solicitation AG-RSCH-ITB-6628. The requirement is for a complete, operational system that is set up and ready for use, including a quaternary pump and inlet solvent filters. The system must be functionally equivalent to the Agilent Eclipse Plus, with column specifications of 4.6 mm internal diameter, 150 mm length, and a 5 micron particle size. A single vendor must perform all installation and provide comprehensive training and operational manuals. Bids are due by November 30, 2026, at 2:00 PM CST. The agency will award the contract based on best value criteria, evaluating factors such as purchase price, vendor reputation, quality, needs alignment, past performance, total cost of ownership, warranty, and delivery time. Payment terms are Net 30 days following successful installation, completion of training, and agency acceptance. Awarded vendors must provide a current certificate of insurance, comply with export control disclosures, and potentially submit an Accessibility Conformance Report. Bidders must provide unit pricing, estimated delivery timelines, and detailed warranty information within their submissions.

POSTED

DEADLINE

NanoRaman Hybrid System ManufacturingThis subcontract for NanoRaman Hybrid System Manufacturing supports prime contractors on research projects at Kansas State University. The scope of work involves the delivery of a fully operational, integrated system featuring an open-architecture microscope, TERS imaging capabilities, and an automated XYZ mapping stage with 0.1 micron step resolution. To meet technical requirements, the system must include TERS-capable optics and laser sources. A critical safety requirement of the contract is the inclusion of a laser safety enclosure to ensure the final system achieves Class 1 Laser Status. The project is categorized under NAICS code 334516, with a response deadline set for December 1, 2026.

Kansas State University

POSTED

DEADLINE

NanoRaman Hybrid System

Solicitation # KSU27-114

Kansas State University is soliciting quotations for the procurement and delivery of a NanoRaman Hybrid System for its Chemical Engineering department to support research, training, and education. The required system must feature a permanently integrated open microscope with a laser safety enclosure to achieve Class 1 laser status, an automated mapping stage with specific micron-level step resolutions, and a dedicated PC with two monitors and necessary control software. The award will be granted to the responsible vendor whose proposal is most advantageous based on price, quality, delivery, and past performance. The selected vendor must provide comprehensive white glove delivery services, including transportation, inside delivery, assembly, installation, calibration, and testing, with all shipping quoted as FOB Destination, Prepaid. Final acceptance is contingent upon the university verifying that the equipment is fully operational. Proposals must be submitted electronically via the KSU Bid Portal by December 1, 2026, and must include delivery lead times, installation approaches, site requirements, and training details. Mandatory submission requirements include an initialed copy of the KSU-146a Contractual Provisions Attachment, a current State of Kansas Tax Clearance Certification, and documentation of past experience with at least three references. Additionally, vendors must provide proof of insurance meeting the minimum requirements outlined in Exhibit B, including Workers Compensation and Commercial General Liability, naming the university and the Kansas Board of Regents as additional insureds.

Kansas State University

POSTED

DEADLINE

MEASURING TUBE, GAS ANA

Solicitation # SPE2DH-27-T-0483

This procurement under solicitation SPE2DH-27-T-0483 is for the acquisition of gas analyzer measuring tubes designed to measure carbon dioxide content in compressed gases. The required items are round glass tubes with melted tips, featuring a measuring range of 100 to 3000 parts per million for one liter of air. The unit of issue is a package containing 10 tubes, with the total quantity requested being two packages. Delivery is required within 20 days after order, with the destination being the USS Arlington (LPD 24) at FPO AE 09564. The contract mandates a non-extendable shelf life of 24 months, with a requirement that no more than three months elapse between the date of manufacture and the date of delivery. Packaging must adhere to ASTM D3951 and DLA packaging requirements, while marking must comply with Medical Marking Standard No. 1 and MIL-STD-129. The acquisition is governed by NAICS code 334516 and includes various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the use of the Wide Area WorkFlow system for electronic invoicing and payment. Destination inspection is required per FAR 52.246-2.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

HPLC System Supply and DeliveryThis subcontract agreement focuses on the supply and delivery of High-Performance Liquid Chromatography (HPLC) systems for prime contractors working on Texas A&M AgriLife Research laboratory projects. The selected provider is responsible for delivering analytical instrumentation that adheres to strict technical requirements for chemical analysis, ensuring that each system is fully operational upon delivery to the designated facility. The opportunity is categorized under NAICS code 334516 and was posted on November 10, 2026. Interested parties must submit their responses by the deadline of November 30, 2026. This procurement is managed through the Texas state agency system to support the specialized research infrastructure of the AgriLife Research organization.

Texas A&M AgriLife Research

POSTED

DEADLINE

Solicitation # AG-RSCH-ITB-6628

Texas A&M AgriLife Research has issued an Invitation to Bid, solicitation number AG-RSCH-ITB-6628, for the procurement of an HPLC System. This solicitation is managed by the Texas A&M AgriLife Procurement Office and is intended for performance within the state of Texas. The primary point of contact for this procurement is Kaitlyn Jordan. Interested vendors must register as bidders through the AggieBid portal to submit their responses electronically. The deadline for bid submission is November 30, 2026, at 2:00 p.m. Central Time. While the solicitation is active, specific details regarding the contract value, technical specifications, and evaluation factors were not provided in the initial bid posting notice.

Texas A&M AgriLife Research

POSTED

DEADLINE

Handheld Mass Spectrometry Instrument SupplierThis subcontract agreement establishes the procurement of five handheld mass spectrometry systems to support prime contractors working on projects for the Ohio Attorney General’s Office BCI Laboratory. The required equipment must adhere to MXT908 specifications for the chemical detection of solids, liquids, gases, and vapors, and must include Type A plug power cables. All units are required to be fully operational upon delivery and must comply with all applicable safety, environmental, and governmental standards. The contract is categorized under NAICS code 334516 and specifies that delivery terms are F.O.B. Destination. Interested parties should note that the response deadline for this opportunity is November 25, 2026.

Ago461700 Bci Laboratory Bciihq

POSTED

DEADLINE

Multi-Mission Mass Spectrometry Instruments

Solicitation # SRC0000042998

The Ohio Attorney General’s Office is soliciting bids under solicitation SRC0000042998 for the procurement of multi-mission handheld mass spectrometry instruments for the Bureau of Criminal Investigation Laboratory. The requirement consists of five MXT908 handheld mass spectrometry systems, which must include power cables, onsite operator training, software configuration, and two years of connected support. Additionally, the vendor must provide 25 packs of sampling tips. While the MXT908 serves as the baseline for performance and functional requirements, equivalent products may be proposed if they meet or exceed these specifications. All goods must be delivered to the London Laboratory by December 31, 2026, with terms set as F.O.B. Destination/Pre-Paid/Allowed. This is an Invitation for Bids where the award will not necessarily be made to the lowest price quote; instead, the Attorney General maintains discretion to select vendors based on their verifiable capabilities to provide qualified products and support. Selected vendors will operate as independent contractors and must comply with various Ohio Revised Code sections, including equal employment opportunity and findings for recovery regulations. All responses must be submitted via the Ohio Buys portal in searchable PDF format. Invoices are to be submitted electronically to the AGO, and payment is contingent upon the availability of lawful appropriations.

Ago461700 Bci Laboratory Bciihq

POSTED

DEADLINE

Real-Time PCR Instrument SupplierThis subcontract opportunity is for the supply of up to two Real-Time Polymerase Chain Reaction PCR instruments to support prime contractors working on projects for the Government of Ontario Ministry of Environment, Conservation and Parks. The required hardware must adhere to specific Instrument Controller Specifications to enable the analysis of environmental DNA for Cyanobacteria, Giardia, Cryptosporidium, Salmonella, and Bacteroidales. A key technical requirement is the inclusion of integrated barcode readers to ensure precise plate traceability. The successful supplier will be responsible for delivering two fully functional instruments to be used within Canada. Interested parties should note that the response deadline for this procurement is November 26, 2026.

Environment, Conservation and Parks

POSTED

about 19 hours ago

DEADLINE

in 15 days

AI Contract Overview

The Government of Canada, through the Department of Public Works and Government Services, is soliciting bids for the supply, delivery, installation, and training of one Cross Section Polisher for electron microscopy sample preparation. The equipment is intended for the Department of Natural Resources Canada located in Hamilton, Ontario, with a final delivery deadline for all deliverables set for March 31, 2026. Interested parties must submit all required supporting documentation and bids by September 22, 2025, at 14:00 EST, as any submissions received after this time will be declared non-responsive. Full Request for Proposal details and attachments are available via SAP Ariba for users with a completed Government of Canada profile. All official amendments to the solicitation will be communicated through the SAP Ariba Event Messages board.

General Info

Canada seeks bids for a Cross Section Polisher delivery by March 31, 2026.

Agency

Government of Canada → Department of Public Works and Government Services

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

*Ontario (except NCR), CAN

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

Response DeadlineSep 22

Deadline has passed

PostedFeb 4

Solicitation

Submission Closed

09/22/2025, 02:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / AgencyGovernment of Canada → Department of Public Works and Government Services

Office AddressN/A

Contacts

Ramnarine Vashti (SPAC/PSPC) (elle-la / she-herPoint of Contact

contact@example.gov

Full Description

Ariba Discovery NPP Template: AMENDMENT TO RESPONSE DEADLINE CLOSING TIME: Please disregard the Ariba Discovery posting response deadline closing time. All required supporting documentation and bid submission must be submitted on 2025-09-22 by 14:00 EST. All bids submitted after 14:00 EST will result in the bid being declared non-responsive. Cross Section Polisher for electron microscopy sample preparation For the supply, delivery, installation and training of one (1) Cross Section Polisher for the Department of Natural Resources Canada, Hamilton, ON. All the deliverables must be received on or before 31 March 2026 The full Request for Proposal (RFP) and attachments can only be accessed and downloaded when logged into your SAP Ariba account and you have filled out your Government of Canada profile. All amendments to this RFP will be posted in the Event Messages board in SAP Ariba. CONTRACTING AUTHORITY Ms. Vashti Ramnarine Acquisitions | Ontario Region - Approvisionnements | Région de l’Ontario contact@example.gov / Tel: +1 (555) 000-0000 - / Tél : +1 (555) 000-0000