This Government Contract opportunity from Department Of Veterans Affairs was posted on September 29, 2016. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

99--REQUEST ADD FUNDS TO DOCUMENT 8286-000017, WACKER NEUSON 3001 DUMPERS WHEELED DUMPER FEATURES A 6,600LB (3-metric 1.5 Metric ton payload, capacity power swivel material handling and hydrostatic permanent four wheel drive as standard WHEEL

Awarded

VA78616Q0534Federal

Submission Closed09/29/2016, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333120

New

SLED

Supply of Truck-Mounted SpreadersThis subcontract agreement involves the procurement and delivery of truck-mounted spreaders intended for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work specifically covers equipment used for the application of seal coatings, aggregates, and ice control materials, falling under Commodity Code 76566 and NAICS code 333120. The contract is managed by the state of New Mexico, with a posting date of October 29, 2026, and a response deadline set for November 27, 2026. The primary objective is the successful delivery of completed spreading equipment to support state transportation infrastructure and maintenance efforts.

POSTED

DEADLINE

Supply of Vehicle-Mounted Snow Plows and Snow WingsThis subcontract agreement involves the procurement and delivery of vehicle-mounted snow plows and snow wings for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work is specifically focused on equipment categorized under Commodity Code 76561, falling under NAICS code 333120. The opportunity was posted on October 29, 2026, with a response deadline set for November 27, 2026. Managed by the state of New Mexico, the contract ensures that necessary snow removal equipment is supplied to support transportation infrastructure projects across the region.

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0379

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

5P207-260743 – Aerial Lift

Solicitation # WS5920009719

Public Works and Government Services Canada, acting on behalf of Parks Canada, is seeking proposals for the acquisition and delivery of an aerial lift to be located in Chambly, Quebec. This federal solicitation, identified by number WS5920009719, is governed by the Canadian Free Trade Agreement. Interested parties must submit their responses by the deadline of November 9, 2026. The procurement process is managed by the Department of Public Works and Government Services, with Stephen Phan serving as the primary contracting authority for this requirement.

Department of Public Works and Government Services

POSTED

DEADLINE

Supply of Moldboard End BitsThis subcontract involves the supply of 46 moldboard end bits for prime contractors supporting Department of Defense hardware procurement projects through the Defense Logistics Agency. The selected provider is responsible for manufacturing or sourcing parts that strictly adhere to the technical specifications for NSN 3805013455968, with delivery coordinated via the First Destination Transportation program to a government destination in Texarkana, Texas. To be eligible for this requirement, contractors must possess a valid CAGE code and Unique Entity Identifier. The project falls under NAICS code 333120, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

RETRACTOR ASSEMBLY, WEA

Solicitation # SPE8EF-27-T-0173

Solicitation SPE8EF-27-T-0173 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of 119 units of Retractor Assembly, Weapon Cradle Adapter, identified by NSN 1740-01-140-7583. This is a critical application item that must adhere to specific source control drawings, requiring offerors not listed as approved sources to obtain OEM approval. The contract specifies a delivery period of 145 days, with a need ship date of April 4, 2027, and an original required delivery date of October 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement incorporates stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Compliance requirements include CMMC Level 2 Self-Assessment, NIST SP 800-171 DoD assessment requirements, and adherence to the Buy American Act and Berry Amendment. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow system. This solicitation is not a small business set-aside.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

MOIL POINT, PAVING BREA

Solicitation # SPE8EE-27-T-0362

Solicitation SPE8EE-27-T-0362 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manu and Con for the procurement of one Moil Point, Paving Breaker, identified by NSN 3820-01-657-7467. The requirement is for a quantity of one unit with a delivery timeframe of 20 days after award and an original required delivery date of October 23, 2026. Shipping is established as FOB Origin, with the freight shipping address located at Camp Gruber in Braggs, Oklahoma. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment. Notably, the government will not evaluate or award to offers utilizing additive manufacturing processes, and a price evaluation preference may be applied to HUBZone concerns.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0181

Solicitation SPE8EF-27-T-0181 is a request for the procurement of two Rear Panel Assemblies, identified by NSN 1740-01-498-6196 and Pacific Consolidated Industries part number 791592-001. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement is categorized under NAICS code 333120. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a need ship date of April 26, 2027, and an original required delivery date of May 27, 2027. The delivery timeline is specified as 167 days after receipt of order, with shipping terms set as FOB Origin. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with RP001 and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0296

Solicitation SPE8EE-27-T-0296 is issued by the Defense Logistics Agency for the procurement of 46 units of moldboard end bits, identified by NSN 3805-01-345-5968. The contract is managed by the Department of Defense under NAICS code 333120 and utilizes First Destination Transportation to reduce costs via Government-Arranged Transportation. Delivery is required within 167 days after receipt of order, with a designated delivery point at DLA Distribution Red River in Texarkana, Texas. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the use of manufacturer corrosive resistant paint for preservation. Technical requirements are further governed by the DLA Master List of Technical and Quality Requirements. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the DLA Troop Support office in Philadelphia.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

TOWBAR, TRAILER, MUNI

Solicitation # SPE8EF-27-T-0205

Solicitation SPE8EF-27-T-0205 is a request for the procurement of 22 units of munitions trailer towbars, identified by NSN 1740002548482. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement specifies a delivery timeframe of 167 days after order, with an original required delivery date of April 15, 2027. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, DFARS 252.204-7012 for safeguarding covered defense information, and various socioeconomic representations. All quotations must be submitted through the DLA Internet Bid Board System by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0182

Solicitation SPE8EF-27-T-0182 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 10 units of Filter Assembly, identified by NSN 1740-01-498-6164 and part number 791551-001. The requirement is categorized under NAICS code 333120. The need ship date is April 26, 2027, with an original required delivery date of May 8, 2027, and a delivery timeframe of 167 days after order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging following ASTM D3951 and palletization complying with RP001. Marking and labeling must align with MIL-STD-129. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, as well as the Buy American Act and Berry Amendment for domestic material preferences. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

TX-UVALDE NFH-MULCHING HEAD ATTACHMENT

Solicitation # 140FF027Q0047

Solicitation 140FF027Q0047 is a 100% HUBZone Small Business set-aside issued by the Department of the Interior's Fws Contracting Activity for the procurement of one Fecon FMX 28 Mulcher attachment (NSN 7540-01-152-8067) for the TX-Uvalde NFH. The equipment must be delivered in new and unused condition by February 15, 2027, and must be fully compatible with a CAT 305 CR mini excavator. The contract includes requirements for standard manufacturer warranties and associated support for parts and maintenance. The government will award the contract based on the Best Value – Lowest Price Technically Acceptable (LPTA) method. Technical acceptability and past performance, including three examples of similar government work, are the primary factors for determining eligibility, after which the lowest price becomes the deciding factor. Offerors must submit quotes via email to the designated point of contact by November 9, 2026. Compliance with various Federal Acquisition Regulations is required, including the Buy American Act and sustainable products and services standards. Payment will be processed electronically through the U.S. Department of the Treasury's Invoice Processing Platform System.

Fws Contracting Activity

POSTED

1 day ago

DEADLINE

in 11 days

AI Contract Overview

The Department of Veterans Affairs National Cemetery Administration is seeking a qualified Service Disabled Veteran Owned Small Business to provide Wacker Neuson 3001 Dumpers or an equivalent model for the Barrancas National Cemetery in Pensacola, Florida. The required equipment must feature a 6,600lb payload capacity, power swivel material handling, and standard hydrostatic permanent four wheel drive. Eligible vendors must be registered in the System for Award Management and the Veteran Business Outreach portal. All proposals are required to be submitted through the VA eCMS Vendor Portal to be considered for the award. Inquiries regarding this solicitation are handled exclusively via email through the designated Contracting Officer.

General Info

Agency

Department Of Veterans Affairs → National Cemetery Administration (36C786)

Contract Value

$103,000

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

VA, USA

Set-Aside

NONE

Awardee

FEDERAL CONTRACTS LLC

Award Issued Date

09/29/2016, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 15

Presolicitation

Type ChangedSep 15

Presolicitation → Solicitation

AwardedSep 29

Contract was awarded

Submission Closed

09/29/2016, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → National Cemetery Administration (36C786)

ContactsNo contacts available

OfficeQUANTICO, VA, 22134, USA

Organization / AgencyDepartment Of Veterans Affairs → National Cemetery Administration (36C786)

Office AddressQUANTICO, VA, 22134, USA

ContactsNo contact information available

Full Description

Solicitation Number: VA786-16-Q-0534 This Pre-solicitation Notice is issued for Service Disabled Veteran Owned Small Businesses (SDVOSB). The Department of Veteran Affairs, National Cemetery Administration (NCA) is seeking qualified SDVOSB to provide Wacker Neuson 3001 Dumpers (Brand Name or Equal) to Barrancas National Cemetery, Naval Air Station, 1 Cemetery Road, Pensacola FL 32508 Awardees must be registered in the System for Award Management website at http://www.sam.gov and registered in www.vip.vetbiz.gov/ . All proposals must be submitted through the Department of Veterans Affairs vendor portal website in order to be considered for award. Please go to VA eCMS Vendor Portal to register, https://www.vendorportal.ecms.va.gov For assistance contact the VAAS helpdesk at +1 (555) 000-0000, or via email at contact@example.gov. No telephone inquiries will be accepted. Any questions should be sent via email to Joselito Roman, Contracting Officer, at contact@example.gov Electronic solicitation will be available for download from http://www.fbo.gov/ on or about September 15, 2016. Responses to the solicitation are due by September 19, 2016 2:00 p.m. EST. No electronic or facsimile proposals will be accepted. Any amendments to the solicitation will also be available at the FedBizOpps URL address. Offerors are advised that they are responsible for downloading amendments.