Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

25--ADJUSTER,VEHICULAR

Awarded

SPE7LX26U6865Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled 25--ADJUSTER,VEHICULAR is an indefinite delivery agreement with an estimated quantity of 7,000 units and a ceiling value of 350,000.00, allowing for flexible procurement within that limit. It was awarded under solicitation number SPE7LX26U6865, posted on June 8, 2026, and is classified under NAICS code 336360, which pertains to motor vehicle body manufacturing. The contracting office is the DLA Land and Maritime, a division of the Department of Defense, located in Columbus, Ohio, with the primary point of contact being Jennifer Payne, reachable via email at JENNIFER.PAYNE@DLA.MIL or by phone at 614-692-1629. There is no specified set-aside type, indicating the contract is open to all eligible vendors without preference for small businesses or other categories. The place of performance has not been defined, leaving flexibility for delivery locations to be determined as orders are issued under the contract.

General Info

Indefinite delivery contract for 7,000 vehicular adjusters up to $350,000, managed by DLA Land and Maritime.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

Contract Value

$350,000

NAICS

336360 - Motor Vehicle Seating and Interior Trim ManufacturingView NAICS

Place of Performance

OH

Set-Aside

NONE

Awardee

SOLID GROUND ELECTRIC LLCView Profile

Award Issued Date

06/08/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 28

Combined Synopsis

AwardedJun 8

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Jennifer Payne

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Indefinite Delivery Contract: Estimated quantity 7.000 ; Not to Exceed 350,000.00

Similar Contracts

Same NAICS industry code

Additive Manufacturing (3D Printing) of Aircraft Components

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supplier of Vehicular Insulation Panels (NSN 2540015925230)

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Pintle Hooks (Critical Application)

LAND SUPPLY CHAIN

POSTED

DEADLINE

SEAT, VEHICULAR

Solicitation # SPE7L4-26-T-6847

Solicitation SPE7L4-26-T-6847 is a request for quotations issued by the DLA Land and Maritime, LSO Combat Vehicles and Armament, for the procurement of 13 vehicular seats identified by NSN 2540-01-494-9054. The procurement falls under NAICS code 336360 and requires submissions via the DIBBS system. The original required delivery date is January 20, 2027, with a need ship date of March 9, 2027. Delivery is set as FOB Origin, with the destination for inspection and acceptance located at the DLA Distribution DSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically RP001 for palletization and MIL-STD-129 for marking. Hazardous materials must be handled according to IP025 and the Hazard Communication Standard. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and NIST SP 800-171 cybersecurity standards. The point of contact for this acquisition is Anna-Rachelle Betts.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

SUPPORT, SEAT, VEHICULAR

Solicitation # SPE7L4-26-T-6771

This solicitation, issued by the Department of Defense under the agency LSO Combat Vehicles and Armament, is for the procurement of 167 units of a left-hand rear seat top assembly for vehicular support. The contract, identified by solicitation number SPE7L4-26-T-6771 and NSN 2540-01-188-3675, requires delivery within 62 days after receipt of the order. Performance is centered in Texarkana, Texas, under NAICS code 336360. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List. Notably, the item contains technical data governed by ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

BOW, VEHICULAR TOP

Solicitation # SPE7L4-26-T-6907

Solicitation SPE7L4-26-T-6907, issued by DLA Land and Maritime LSO Combat Vehicles and Armament, is a request for quotations for the procurement of one vehicular top bow, identified by NSN 2540-01-698-1601. The item is designated as a critical application item and must be manufactured in accordance with specific Technical Data Packages, including reference drawings 19207 57K9025, 19207 12609968, and 19207 12609968-002. Delivery is required within 168 days, with an original required delivery date of January 17, 2027, and a need ship date of March 9, 2027. Shipping is established as FOB Origin, with the final delivery destination being DLA Distribution San Joaquin in Tracy, California. To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program certification and be authorized to access export-controlled technical data subject to ITAR or EAR regulations. The procurement incorporates strict quality and packaging standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and DLA packaging requirements under RP001. Additionally, the contract requires compliance with CMMC Level 2 certification and domestic material restrictions, such as the Buy American Act and the Berry Amendment. Price evaluation preferences are available for certified HUBZone small businesses. Quotations must be submitted via the DIBBS system by September 21, 2026, and all payment requests must be processed through the Wide Area WorkFlow system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-10F7

Solicitation SPE7L1-26-T-10F7 is a Request for Quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 625 units of Pintle Hooks, identified as NSN 2540015336818 and General Motors LLC part number TX017916. This item is designated as a critical application item. The required delivery date is March 15, 2027, with a need ship date of March 9, 2027. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements from the DLA Master List, with packaging following ASTM D3951 for non-hazardous materials and IP025 for hazardous materials per FED-STD-313. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The procurement is governed by NAICS code 336360 and incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on the acquisition of certain telecommunications equipment.

LAND SUPPLY CHAIN

POSTED

DEADLINE

FRAME SECTION, SEAT, VEH

Solicitation # SPE7L4-26-T-6909

Solicitation SPE7L4-26-T-6909 is a fixed-price request for quotations issued by the Department of Defense, specifically DLA Land and Maritime under the LSO Combat Vehicles and Armament office. The procurement is for seven units of a vehicular seat frame section, identified by NSN 2540-01-698-0901 and associated with drawing 7874019/12609971. The delivery is scheduled for the New Cumberland, PA facility, with an original required delivery date of January 26, 2027, and a need ship date of March 9, 2027. All quotes must be submitted via the DIBBS system by September 21, 2026. The contract imposes strict technical and quality requirements through the DLA Master List and requires compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the item is subject to export controls under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification. Additionally, the solicitation prohibits the use of additive manufacturing unless authorized and mandates adherence to the Buy American Act and the Berry Amendment. Inspection and acceptance will occur at the destination. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Solicitation # SPE7L4-26-T-6815

This contract is a solicitation for the procurement of seven tarpaulins under solicitation number SPE7L4-26-T-6815, issued by the Department of Defense through the LSO Combat Vehicles and Armament. The items are identified by NSN 2540-01-661-3113 and are associated with part numbers from Newtex Industries and Bridport Erie Aviation. The delivery is required within 168 days after order, with an original required delivery date of January 31, 2027, and a need ship date of March 9, 2027. The agreement specifies that delivery is FOB Origin, with inspection and acceptance occurring at the destination. Shipping and delivery are directed to DLA Distribution San Joaquin in Tracy, California. Compliance with several technical and quality standards is mandatory, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and specific DLA requirements such as RP001 for palletization and RQ011 for the removal of government identification from non-accepted supplies.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

TANK, FUEL, VEHICULAR HE

Solicitation # SPE7L4-26-T-6808

This contract is for the procurement of two vehicular fuel heater tanks, identified by NSN 2540-01-681-3691 and part number N07-90416. The order is issued by the Department of Defense through the LSO Combat Vehicles and Armament agency. Delivery is required within 168 days, with a need ship date of March 9, 2027, and a final required delivery date of March 13, 2027. The items are to be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging requirements RP001 and the removal of government identification from non-accepted supplies under RQ011. There is a strict prohibition against the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and either IP025 for hazardous materials or ASTM D3951 for non-hazardous materials, with DLA requirements taking precedence.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

FRAME, SEAT, VEHICULAR

Solicitation # SPE7L4-26-T-6832

Solicitation SPE7L4-26-T-6832, issued by DLA Land and Maritime under the LSO Combat Vehicles and Armament, is for the procurement of eight vehicular seat frames (NSN 2540011803589) used on Light Armored Vehicles. The requirement specifies equivalent part numbers from General Dynamics Land Systems Canada (P/N 10557098) and Oshkosh Defense LLC (P/N 2FP400). The delivery period is 168 days after receipt of order, with a need ship date of March 9, 2027, and an original required delivery date of July 21, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements (RP001) and marking standards (MIL-STD-129). Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements (RA001), and the removal of government identification from non-accepted supplies is required per RQ011. Administrative requirements include the use of Wide Area WorkFlow (WAWF) for invoicing and payment, compliance with the Buy American Act and Berry Amendment, and adherence to DFARS cybersecurity and safeguarding standards for covered defense information.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

KIT, UPPERCUSHION

Solicitation # SPE7L4-26-T-6788

This contract is for the procurement of two upper cushion kits, identified by NSN 2540016538515 and part number K000065 from Jankel Tactical Systems LLC. The order is issued by the Department of Defense under the LSO Combat Vehicles and Armament agency. Delivery is required within 168 days, with a required delivery date of February 8, 2027, and a need ship date of March 9, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and quality requirements, specifically citing MIL-STD-2073-1 and MIL-STD-129 for marking and packaging of kits. It also incorporates technical and quality requirements from the DLA Master List and includes specific instructions regarding the removal of government identification from non-accepted supplies. Inspection and acceptance will take place at the destination.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

SEAL ASSEMBLY KIT

Solicitation # 7017777381

This sources-sought notice issued by DLA Land and Maritime is for a Seal Assembly Kit under NSN 5330-014629466. The current approved source is Curtiss-Wright Electro-Mechanical Corp. Due to the AMC/AMSC designation of 3D, the item is typically procured from the actual manufacturer because the technical data required for competitive solicitation is not economically available or physically accessible. The agency is seeking additional qualified sources capable of manufacturing these items. Interested companies may submit information to Contract Specialist Amber Rohly by the response deadline of September 19, 2026. To become an approved source, applicants must submit a Source Approval Request package through the DLA Land and Maritime program to demonstrate that their product meets or exceeds the quality of the original equipment manufacturer.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supplier/Dealer of Steering Tie Rod Ends

Construction and Mining (except Oil Well) Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Manufacturer of Steering Tie Rod Ends

Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

DEADLINE

Supply of Insulating Compound Electrical (NSN 5970-002957658)

Nitrogenous Fertilizer Manufacturing

POSTED

DEADLINE

Solicitation # SPE7M126U6073

DLA Land and Maritime is soliciting quotes for the procurement of 3,398 seals under NSN 5330014964243. This requirement may result in an Automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 509 units, with an estimated two orders per year. Delivery is required within 97 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 5F573 233109509643891. This is an electronic RFQ under NAICS code 339991, and all quotes must be submitted electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available. Interested parties should coordinate through the DLA Land and Maritime office in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

53--PACKING WITH RETAINER

Solicitation # SPE7LX26U002A

This procurement request from DLA Land and Maritime is for NSN 5330001438722 Packing with Retainer under solicitation SPE7LX26U002A. The requirement consists of an initial quantity of 76 units with a delivery window of 97 days after receipt of order. This is a source controlled drawing item, and the items must strictly adhere to the cited drawings and military specifications. Approved sources are limited to CAGE codes 07060 and 99193. The solicitation may result in an Indefinite Delivery Contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. There is a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Shipping will be directed to various CONUS and OCONUS DLA Depots. This opportunity is a total set-aside for small businesses under NAICS code 339991, and all quotes must be submitted electronically by September 24, 2026.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

61--CABLE,POWER,ELECTRICAL

Solicitation # SPE7M226U0467

This procurement solicitation, issued by DLA Land and Maritime, is for the supply of electrical power cables under NSN 6145012035390. The requirement consists of an initial quantity of 572 feet, with a delivery window of 80 days after the order is received. This is a qualified products list item and is designated as a total small business set-aside under NAICS code 331318. The solicitation may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. While the estimated number of orders per year is two, the contract includes a guaranteed minimum quantity of 85 units. Shipments will be directed to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 24, 2026.

Other Aluminum Rolling, Drawing, and Extruding

POSTED

DEADLINE

59--CUSHION,EAR

Solicitation # SPE7M126U6067

DLA Land and Maritime is soliciting quotes for the procurement of ear cushions under NSN 5965014857173. This is a total small business set-aside under NAICS code 334310, with an initial requirement of 279 units to be delivered within 83 days after the order is placed. The procurement may result in an automated indefinite delivery contract with a one-year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 41 units and an estimated two orders per year, with shipments destined for various CONUS and OCONUS DLA depots. Approved sources for this requirement are identified as 1PNR4 40243G-02 and 1PNR4 40243G-07. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation, specifications, or drawings are available, and all submissions must be handled through the electronic portal.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

53--TRACK,SLIDING DOOR

Solicitation # SPE7L126U0721

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of sliding door tracks under NSN 5340015973964. This requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 332722. The initial request is for 43 units with a delivery window of 133 days after the order is placed. Items are to be shipped to various CONUS and OCONUS DLA Depots. This procurement may result in an Automated Indefinite Delivery Contract with a one-year term or until a total value of 350,000.00 is reached. The contract anticipates approximately two orders per year with a guaranteed minimum quantity of six units. All quotes must be submitted electronically by the deadline of September 24, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

53--SPRING,HELICAL,COMPRES

Solicitation # SPE7L126U0720

The Department of Defense, through DLA Land and Maritime, is soliciting quotes for the procurement of helical compression springs under NSN 5360013853389. This request for quotation may result in an Automated Indefinite Delivery Contract with a term of one year or until a total expenditure of 350,000.00 is reached. The contract specifies a guaranteed minimum quantity of one unit, with an estimated one order per year. Delivery is required within 104 days after the order date to various CONUS and OCONUS DLA Depots. Approved sources for this procurement include 07309 112129029 and 07309 112159005. All responsible sources are invited to submit electronic quotes by the deadline of September 24, 2026. Specifications and drawings are not provided as separate documents, and the solicitation is available exclusively through the electronic link provided in the notice.

Spring Manufacturing

POSTED

DEADLINE

59--CIRCUIT CARD ASSEMBLY

Solicitation # SPE7M126U6071

DLA Land and Maritime is soliciting quotes for the procurement of 75 circuit card assemblies under NSN 5998014971477. This requirement may result in an automated Indefinite Delivery Contract with a one-year term or a total value cap of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 11 units, with an estimated two orders per year. Delivery is required within 160 days after the order is placed, with shipments going to various CONUS and OCONUS DLA Depots. The approved source for this item is 0KPC5 C98327-1. This is an RFQ process where all responsible sources may submit electronic quotes by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled electronically through the specified government channels.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Solicitation # SPE7LX26U002B

DLA Land and Maritime is soliciting quotes for the procurement of butt hinges under NSN 5340016609476. This request for quote may result in an automated indefinite delivery contract with a one year term or until a total of 350,000.00 is reached. The initial requirement specifies a quantity of 48 units to be delivered within 116 days after the order is placed, with a guaranteed minimum quantity of 7 items. Shipments will be directed to various CONUS and OCONUS DLA depots. This opportunity is designated as a total small business set aside under NAICS code 332510. The approved source is identified as 94222 E6-10-420-50. All interested and responsible sources must submit their quotes electronically by the deadline of September 24, 2026. No hard copies of the solicitation or technical drawings are available, and all submissions must be handled through the specified electronic channels.

Hardware Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS