Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

25--ARM ASSEMBLY,PIVOT,TRA

Active

SPE7L326T153RFederal

Response Deadline08/17/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation seeks the procurement of 38 units of ARM ASSEMBLY, PIVOT, TRA with NSN 2530012228006, divided into two line items: 37 units to be delivered to DLA DISTRIBUTION RED RIVER within 288 days after order placement and one additional unit to be delivered within 90 days after order placement. All responsible sources may submit electronic quotes, which will be evaluated if received before the deadline. This is a Service-Disabled Veteran-Owned Small Business set-aside under FAR 19.14, restricting eligibility to qualified SDVOSBs. The solicitation number is SPE7L3326T153R, with a posted date of August 6, 2026, and a firm response deadline of August 17, 2026. The acquisition is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact referenced in the solicitation document, accessible through the provided SAM.gov link or DIBBS portal.

General Info

38 ARM ASSEMBLY units requested, SDVOSB set-aside, delivery deadlines of 90 and 288 days, quote deadline August 17, 2026.

Agency

Department Of Defense → DLA Land And MaritimeView Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) ManufacturingView NAICS

Place of Performance

OH

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedAug 6

Combined Synopsis

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 12:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / Agency

Department Of Defense → DLA Land And Maritime

View Agency Profile

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 2530012228006 ARM ASSEMBLY,PIVOT,TRA: Line 0001 Qty 37 UI EA Deliver To: DLA DISTRIBUTION RED RIVER By: 0288 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION RED RIVER By: 0090 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

25--AIR SPRING,VEHICULAR

Solicitation # SPE7L326T156T

The U.S. Department of Defense, through DLA Land and Maritime, is seeking to procure 261 air springs for vehicular use under NSN 2510015585633, with 110 units and 151 units listed in separate line items, both to be delivered to W1A8 DLA DISTRIBUTION within 66 days of order award. The procurement is conducted via a Request for Quote with a strict electronic submission requirement, and no hard copies of the solicitation or accompanying technical specs, plans, or drawings are available. Only approved sources are eligible, with the designated approved source identified as 74410 90557345. The solicitation is a Small Business Set Aside under NAICS code 336330, meaning only qualified small businesses may respond. The opportunity was posted on August 6, 2026, with quotes due by August 17, 2026. All responsible sources may submit a quote as long as it is received on time and submitted electronically through the designated SAM.gov portal. Primary inquiries must be directed via email to the buyer listed in the solicitation document, available through the provided link, as no physical or direct contact points are provided for this procurement.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

25--CALIPER ASSEMBLY,DI

Solicitation # SPE7L326T158T

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 30 units of CALIPER ASSEMBLY, DI with NSN 2530124171836 under solicitation number SPE7L326T158T, which is a Small Business Set Aside - Total. The requirement is for delivery to DLA Dist San Joaquin with a delivery deadline of 168 days after order award, and the only approved source is D2006 107250.04. The solicitation is issued as an RFQ with no hard copies available; all submissions must be submitted electronically through the SAM.gov portal via the provided link, and no specifications, plans, or drawings are provided to offerors. Responsible small business sources may respond, but quotes must be received by the deadline of August 17, 2026, to be considered. The North American Industry Classification System code is 336330, and all inquiries must be directed to the designated buyer email listed in the solicitation document, accessible only through the official DIBBS website or the SAM.gov workspace link.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

25--PARTS KIT,BALL JOINT

Solicitation # SPE7L326T156A

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for a Small Business Set Aside procurement of the Parts Kit, Ball Joint with NSN 2530015406069, with a requirement for nine units delivered to W1A8 DLA Dist San Joaquin within 240 days of award. The only approved source for this item is 78710 7-45819-1, and the solicitation, identified as SPE7L326T156A, is issued as an RFQ with no hard copies available; all submissions must be submitted electronically. The solicitation is open to all responsible sources, and no specifications, plans, or drawings are provided. The NAICS code is 336330, and the opportunity is exclusively reserved for small businesses under a total set-aside. Responses are due by August 17, 2026, and the solicitation can be accessed through the online SAM.gov workspace link. Primary inquiries should be directed via email to the designated buyer, with further details available by searching the solicitation number on the DIBBS portal. The contracting office is located in Columbus, Ohio.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

25--CONTROL,ANTI-LOCK B

Solicitation # SPE7LX26T0845

The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for eight-six units and one additional unit of NSN 2530017191507 CONTROL, ANTI-LOCK B, with delivery required to W1A8 DLA DISTRIBUTION within 258 and 60 days respectively. This procurement is a Small Business Set Aside under NAICS code 336330, meaning only small businesses are eligible to respond, and the solicitation is open to all responsible sources that can provide the item. Quotes must be submitted electronically, with a response deadline of August 17, 2026. The solicitation number is SPE7LX26T0845, posted on August 6, 2026, and all inquiries should be directed via email to the designated point of contact listed in the solicitation document. The contract is issued from the office located in Columbus, Ohio, with no specific place of performance designated beyond the delivery point.

DLA Land And Maritime

POSTED

about 8 hours ago

DEADLINE

2530 - Lift Truck Parts

Solicitation # SP3300-26-Q-0235

The contract titled 2530 - Lift Truck Parts is a Small Business Set Aside opportunity issued by the Department of Defense through DLA Distribution, specifically for parts required by DLA Distribution Oklahoma City. Solicitation number SP3300-26-Q-0235 was posted on August 6, 2026, with a response deadline of August 12, 2026, at 9:00 p.m. Eastern Time. The North American Industry Classification System code 336330 indicates this procurement is for motor vehicle parts and accessories manufacturing, focusing on lift truck components. The contracting office is located in New Cumberland, Pennsylvania, while the place of performance is in Oklahoma City, Oklahoma, with the delivery address designated as 73145. This is a combined solicitation, allowing for both solicitation and award under a single process. Adam Pennartz is the primary point of contact for inquiries, reachable via email at Adam.1.Pennartz@dla.mil, and the opportunity is exclusively reserved for small businesses as defined by the Small Business Administration, with no set-aside for other categories.

DLA Distribution

POSTED

about 8 hours ago

DEADLINE

ARM ASSEMBLY, PIVOT, TRA

Solicitation # SPE7LX-26-U-9303

The contract is an indefinite-delivery/indefinite-quantity (IDIQ) solicitation under SPE7LX-26-U-9303 for the supply of ARM ASSEMBLY, PIVOT, TRACK SUSPENSION units, with an estimated quantity of 459 units and a maximum contract value of $350,000, issued as a total small business set-aside under NAICS code 336330. Delivery must be completed within 75 days after the date of order, with FOB Destination terms applicable unless shipping to non-contiguous U.S. locations where FOB Origin under the First Destination Transportation program must be used. The contract incorporates stringent technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and mandates compliance with MIL-STD-129 for labeling and bar-coding, MIL-STD-2073-1E for packaging, and SPI AK13564613 Revision B for packaging specifications. All items must adhere to RP001 DLA Packaging Requirements, and packaging materials must use designated ZZ codes for preservation, though specific definitions for these codes are not provided. The contract enforces multiple mandatory compliance areas including cybersecurity under CMMC Level 2 certification, safeguarding covered defense information in accordance with FAR 252.204-7012 which requires implementation of NIST SP 800-171 controls and timely reporting of cyber incidents, and strict export control protocols under DFARS 252.225-7048, restricting access to export-controlled technical data only to contractors certified under the US/Canada Joint Certification Program, who have completed required training and been approved by DLA. Use of Class I ozone-depleting chemicals is absolutely prohibited, and any substitute chemicals require prior approval. Hazardous materials must be labeled according to OSHA’s Hazard Communication Standard (29 CFR 1910.1200), with non-exempt hazard labels submitted for review prior to award, and radioactive material shipments exceeding thresholds require advance notification to the Contracting Officer with full technical details. All government identification must be removed from non-accepted supplies prior to return, and the contractor must affirm representations regarding UEI and CAGE codes, small business status, and potential provision of covered telecommunications equipment. Invoicing and payment must occur exclusively through Wide Area WorkFlow (WAWF),

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PARTS KIT, BRAKE SHOE

Solicitation # SPE7LX-26-U-9298

The contract pertains to the procurement of a Parts Kit, Brake Shoe, identified by NSN 2530016861627, with an estimated quantity of 242 units under an indefinite-quantity contract structure. Delivery is required 79 days after award, on an FOB Origin basis, meaning title and responsibility transfer to the government upon shipment from the contractor’s location. The contract has a maximum value of $350,000, with no guaranteed minimum purchase obligation, and the unit of issue is each (EA). Packaging and preservation must strictly comply with the latest revision of MIL-STD-2073-1E, Appendix D, for kits, with detailed packaging codes assigned as ZZ or Z for preservation method, cleaning/drying, and materials, indicating that specific parameters will be defined per item. Mercury or mercury compounds are explicitly prohibited in any phase of preservation, packaging, or labeling. Marking and labeling must adhere to MIL-STD-129, including machine-readable 2D Data Matrix barcodes on unit and intermediate containers, with no special marking required. Palletization must meet DLA Packaging Requirements for Procurement (RP001). Inspection and acceptance occur at the destination by the government, in accordance with FAR 52.246-2. The contractor must comply with all applicable hazardous materials regulations under 29 CFR 1910.1200, submit Safety Data Sheets prior to award, and update the government on any changes to material composition. The contract includes multiple FAR and DFARS clauses covering small business representation, equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous material identification, authorization and consent, unbilateral obligations, subcontracting, safety notifications, ocean transportation, whistleblower rights, information disclosure, and NIST SP 800-171 cybersecurity requirements. Offerors must have an active Unique Entity Identifier and CAGE code, and are required to self-certify their size and socioeconomic status, including any joint venture participation. Invoicing must be processed electronically through Wide Area WorkFlow, and payment is governed by applicable DoD financial procedures. The solicitation was issued on August 5, 2026, with a response deadline of August 20, 2026, under solicitation number SPE7LX-26-U-9298, administered by the Department of Defense’s Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PITMAN ARM, STEERING

Solicitation # SPE7L3-26-T-148L

The contract pertains to the procurement of 20 units of a steering pitman arm with NSN 2530-01-567-5525 and part number 2596984, issued under solicitation SPE7L3-26-T-148L by the Department of Defense through DLA. Delivery is required FOB origin within 121 days with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically IP025, and adhere to MIL-STD-129 for labeling; if the item is non-hazardous, commercial packaging in accordance with ASTM D3951 is permitted only if not superseded by DLA requirements. Palletization must follow RP001 standards. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must align with DLAD Proc Notes C19 and C20. The unit price is $20.00 per unit, totaling $400.00, and the required ship date is December 17, 2026. The contract is governed by DLA procurement policies and technical specifications referenced through official DLA web resources, and the primary point of contact is Matthew Curry at DLA.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PITMAN ARM, STEERING

Solicitation # SPE7LX-26-U-8897

The contract covers the procurement of 21 steering pitman arms under an indefinite-delivery contract with a guaranteed minimum of three units and a maximum contract value of $350,000, issued as a total small business set-aside under NAICS code 336330. The item is identified by NSN 2530-01-567-5525 and will be delivered FOB origin within 73 days of order placement to locations within the Continental United States under DLA direct procurement. All deliveries must comply with stringent packaging and labeling requirements per MIL-STD-129, with non-hazardous items packaged according to ASTM D3951 and hazardous items handled under TQ requirement IP025 as defined in the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards. Palletization must follow RP001 guidelines, and all packaging must be marked with the correct Unit of Issue and Quantity per Unit Pack as specified. Inspection and acceptance occur at the destination, with the government responsible for verifying compliance with quality and packaging criteria. The contract mandates full compliance with a comprehensive suite of federal regulatory and cybersecurity requirements, including safeguarding covered defense information per NIST SP 800-171 and reporting cyber incidents within 72 hours under DFARS 252.204-7012. Contractors must adhere to prohibitions on acquiring covered telecommunications equipment, handling hazardous materials in accordance with OSHA’s Hazard Communication Standard, and complying with whistleblower protections and restrictions on compensation for former DoD officials. Invoicing and payment must be processed exclusively through the Wide Area WorkFlow system, and all subcontracting activities are governed by clauses requiring flow-down of key security, ethical, and reporting obligations. The solicitation requires offerors to provide accurate representations of their small business status and Unique Entity Identifier, and any disclosure of covered defense telecommunications equipment or services triggers detailed reporting requirements. The contract does not include pricing details in the CLIN table but is structured with clear quantity limits and delivery expectations, with Theodore Misiolek of DLA Land and Maritime serving as the primary point of contact for acquisition matters.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

BEADLOCK, PNEUMATIC

Solicitation # SPE7L1-26-T-918B

The contract pertains to the procurement of four pneumatic beadlock units, identified by NSN 2530017072385 and part number 1525348-686, under solicitation SPE7L1-26-T-918B, issued by the Defense Logistics Agency’s Land Supply Chain. Delivery is required within 20 days of order placement to the designated destination at Camp Pendleton, California, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the delivery point, and all items must comply with strict packaging and labeling mandates, including MIL-STD-129 for marking, RP001 for palletization, and ASTM D3951 for non-hazardous commercial packaging, unless classified as hazardous under FED-STD-313, in which case IP025 requirements apply. The DLA Master List of Technical and Quality Requirements supersedes all other standards. The use of ozone-depleting chemicals is strictly prohibited, and substitute chemicals must be pre-approved unless explicitly authorized by the specification. Barcoding and electronic traceability are required, and shipment must be sent via the fastest traceable means, excluding parcel post. Payment will be processed through WAWF, and the contract is structured as a firm-fixed-price type. All contractors must comply with a suite of federal and Defense Federal Acquisition Regulation Supplement clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material handling, export controls, prohibited telecommunications equipment, and safeguarding defense information. Offerors must provide a Unique Entity ID and complete socioeconomic certifications if claiming small business status, and must disclose any involvement with covered defense telecommunications equipment. Historical pricing suggests a total value of approximately $297.64 based on a unit cost of $74.41, though the current solicitation does not state unit prices. The required delivery date is April 24, 2026, and proposals must be submitted through the DIBBS portal by August 17, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

ARM, STEERING GEAR

Solicitation # SPE7L1-26-T-912U

The contract pertains to the procurement of a right-hand tie rod end for a steering gear, identified by NSN 2530012889854 and part number SW25198-2, with a total quantity of three units, each priced at one dollar, delivered under a single solicitation number SPE7L1-26-T-912U. Delivery is required within ten days to the specified destination in Brundidge, Alabama, with FOB origin terms, zero quantity variance allowed, and inspection and acceptance taking place upon arrival. All packaging must comply strictly with DLA Packaging Requirements for Procurement RP001 and MIL-STD-129 labeling standards, and material must be packaged per ASTM D3951 unless classified as hazardous under FED-STD-313, in which case TQ requirement IP025 applies, with all DLA Master List technical and quality requirements taking precedence over commercial standards. Shipment must be sent via the fastest traceable means excluding parcel post, and all packaging must be palletized according to specified guidelines. Each unit must be marked with the assigned military freight number and project identifier, and delivery is due no later than July 31, 2026. The contract is issued by the Department of Defense’s Land Supply Chain under a federal solicitation classified under NAICS code 336330, with the point of contact listed as Kristina Derry. The supplier, DRS Sustainment Systems, Inc., is required to adhere to all DLA technical and quality mandates referenced through R and I numbers in the DLA Master List of Technical and Quality Requirements, accessible via the DLA website. The same delivery address, mark-for information, and shipment tracking details apply to all three line items, which are distinguishable only by their purchase request numbers: 7017727249, 7017727248, and 7017727250. Government-specific identifiers and logistics codes are included for internal tracking, and the contract explicitly prohibits the use of non-traceable shipping methods. All documentation, labeling, and packaging must reflect the approved unit of issue and quantity per unit pack as defined in the contract, with full compliance mandated for acceptance.

LAND SUPPLY CHAIN

POSTED

DEADLINE

INSTALLATION KIT, VEHICLE COMPONENTS

Solicitation # 7017134290

DLA Land and Maritime is seeking sources for a one-time purchase of 138 Installation Kits, Vehicle Components, identified by NSN 2530-016603400, with the approved manufacturer being OSHKOSH DEFENSE LLC under part number 4341939. The agency currently lacks technical data for this item and is soliciting potential suppliers to submit information through DLA Procurement Notes L04 and M06 to qualify as an approved source. Interested parties must complete and return a Market Survey to Jennifer Cummins at JENNIFER.CUMMINS@DLA.MIL to be considered for the solicitation. The solicitation, numbered 7017134290, was posted on August 4, 2026, with a response deadline of August 11, 2026, at 7:00 PM Eastern Time. The action falls under NAICS code 336330 and is managed by the Department of Defense through the DLA Land and Maritime office located in Columbus, Ohio. No set-aside designation applies to this opportunity.

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

29--PUMP,HAND,FUEL PUMP

Solicitation # SPE7L526T4904

The U.S. Department of Defense, through DLA Land and Maritime, is seeking quotations for 294 hand fuel pumps with NSN 2910014705545 under solicitation number SPE7L526T4904, which is a Small Business Set Aside with no small business size standard applied. The procurement is exclusively for responsible sources, and all quotes must be submitted electronically by the deadline of August 17, 2026. Delivery is required to W1A8 DLA Distribution within 153 days after award, and the approved source for this item is 15852 AP00314. The solicitation is issued as a combined solicitation, and no hard copies or detailed specifications, plans, or drawings are available. The North American Industry Classification System code for this requirement is 336310, and inquiries must be directed via email to the designated point of contact at DibbsBSM@dla.mil, with the full solicitation document accessible only through the Sam.gov portal.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

47--HOSE ASSEMBLY,NONMETAL

Solicitation # SPE7M426T320D

The contract solicitation is for the procurement of 11 units of a nonmetal hose assembly with NSN 4720012482251, to be delivered to DLA Distribution Cherry Point within 154 days after order placement. This is a source-controlled item requiring parts to be manufactured exclusively by the approved sources listed as 78570 and 99193, both using drawing number 3886075-2. All supplied items must strictly conform to the technical specifications detailed in the referenced drawing, and digitized versions of the drawing and associated military standards can be accessed electronically. The solicitation, identified as SPE7M426T320D, was posted on August 6, 2026, with quotes due by August 17, 2026, and is exclusively available online through the provided URL; no hard copies are distributed. Submission of quotes is mandatory through electronic means, and all responsible suppliers are invited to respond. The procurement is managed by the DLA Land and Maritime office in Columbus, Ohio, with all inquiries directed to the designated point of contact via email.

Fabric Coating Mills

POSTED

about 8 hours ago

DEADLINE

59--SWITCH,PRESSURE

Solicitation # SPE7M526T374F

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 11 units of the pressure switch with NSN 5930008400253, to be delivered to DLA Distribution Depot Oklahoma within 168 days of award. This procurement is conducted under solicitation number SPE7M526T374F, which was posted on August 6, 2026, with responses due by August 17, 2026. Only approved sources—09049 42D49C and 81205 10-3269-10—are eligible to respond, and all quotations must be submitted electronically through the SAM.gov portal; hard copies are not accepted. No technical specifications, plans, or drawings are provided, and the solicitation is open to all responsible sources that submit timely quotes. The procurement falls under NAICS code 332919 and is managed from the office in Columbus, Ohio. Any questions must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided link or via the DIBBS website using the solicitation number.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 8 hours ago

DEADLINE

25--LADDER,VEHICLE BOARDIN

Solicitation # SPE7L426T6096

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for three vehicle boarding ladders identified by NSN 2540015932047 under solicitation number SPE7L426T6096. The requirement is for delivery to W1A8 DLA DISTRIBUTION with a mandatory delivery deadline of 168 days after order award. This procurement is issued as a combined solicitation open to all responsible sources, and responses must be submitted electronically via the SAM.gov portal; hard copies are not accepted. Digital access to drawings, military specifications, and standards is provided electronically, and no physical documentation will be furnished. The solicitation was posted on August 6, 2026, with a firm response deadline of August 17, 2026. The NAICS code 332999 applies, indicating the product falls under other fabricated metal product manufacturing. The contracting office is located in Columbus, Ohio, and all inquiries must be directed via email to DibbsBSM@dla.mil, with reference to the buyer listed in Block 5 of the solicitation document, accessible through the provided SAM.gov link or via the DIBBS website by entering the solicitation number. No set-aside classification is designated for this procurement, making it fully open to all qualified offerors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE7M426T313T

The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for NSN 5330015124594, a gasket, under solicitation number SPE7M426T313T, which is a Small Business Set Aside for total procurement. A total of 36 units are required, each to be delivered to W1A8 DLA DISTRIBUTION within 244 days after award. The approved source for this item is BLUE GYLON 3565, and quotes must be submitted electronically via the SAM.gov portal; hard copies are not accepted. The solicitation, posted on August 6, 2026, has a response deadline of August 17, 2026, and is open to all responsible sources capable of meeting requirements. No specifications, plans, or drawings are available, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS website using the solicitation number. The NAICS code is 339991, and the procuring office is located in Columbus, Ohio.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

20--HATCH,RESTRAINT

Solicitation # SPE7M426T311X

The contract seeks the procurement of six hatch restraint units with NSN 2040013050618, to be delivered to DLA Distribution site W1A8 within 168 days after award. Only approved sources—0FB84, 38597, 563J1, and 8X044—all referencing part number 5223513-9—are eligible to submit quotes. The solicitation is issued as an RFQ under number SPE7M426T311X, with no hard copies available; all submissions must be made electronically through the SAM.gov portal. Technical specifications, plans, or drawings are not provided, and responsible sources are invited to quote even without access to detailed documentation. The opportunity is open without set-aside designation and falls under NAICS code 332510 for fabricated metal product manufacturing. The issuing organization is the DLA Land and Maritime office located in Columbus, Ohio, with inquiries directed to the listed primary point of contact via email. Quotes must be received by August 17, 2026, and the solicitation was posted on August 6, 2026.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

43--HOOD ASSEMBLY FIBER

Solicitation # SPE7M126T259W

The procurement is for 3 units of the Hood Assembly Fiber with NSN 4310015843052, to be delivered to W1A8 DLA Dist San Joaquin within 168 days of award. The only approved source for this item is 50GK4 HC15871224, and the solicitation is issued as a Request for Quotation under solicitation number SPE7M126T259W. This acquisition is a Small Business Set Aside, Total, meaning only small businesses are eligible to compete, and it is classified under NAICS code 333912. All responsible sources may submit quotes electronically; hard copies are not available and no specifications, plans, or drawings are provided. Quotes must be submitted by the deadline of August 17, 2026, and the solicitation can be accessed solely through the online SAM.gov portal. The contracting activity is managed by the DLA Land and Maritime office located in Columbus, Ohio, with all inquiries directed via email to the designated point of contact.

Air and Gas Compressor Manufacturing

POSTED

about 8 hours ago

DEADLINE

53--CAP,PROTECTIVE,DUST AN

Solicitation # SPE7M426T317V

The contract solicitation is for 12 units of protective dust caps with NSN 5340010434078, to be delivered to the DLA Distribution Depot Hill within 168 days of award. The approved source is specified as 18740 SK3806-9, and the procurement is conducted through a Request for Quote, with no hard copies available—only electronic submission is permitted. The solicitation, identified by number SPE7M426T317V, is a Small Business Set Aside under NAICS code 332313, meaning only qualified small businesses may respond. All responsible sources may submit quotes if received by the deadline of August 17, 2026, but no specifications, plans, or drawings are provided. The procurement is managed by the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and the full solicitation document must be accessed electronically through the SAM.gov link provided.

Plate Work Manufacturing

POSTED

about 8 hours ago

DEADLINE

48--VALVE,GLOBE

Solicitation # SPE7MC26T172A

The solicitation seeks six globe valves with NSN 4820011469853 for delivery to DLA Distribution at location W1A8, with a required delivery timeline of 207 days after award. The approved source for this item is vendor 86184 with part number 62715J. This procurement is conducted as a Request for Quotation under solicitation number SPE7MC26T172A, which is exclusively available electronically through the provided SAM.gov link; no hard copies are provided and no specifications, plans, or drawings are included. All responsible sources may submit quotes, but submissions must be made electronically and received by the deadline of August 17, 2026. This is a Small Business Set Aside, total, under NAICS code 332911, intended to prioritize small business participation. The awarding agency is the Department of Defense under DLA Land and Maritime, based in Columbus, Ohio. For questions, interested parties must contact the designated buyer via email at DibbsBSM@dla.mil, as detailed instructions are only accessible through the solicitation’s Additional Information link or via the DIBBS website using the solicitation number.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

48--VALVE ASSEMBLY,MANI

Solicitation # SPE7MC26T180P

The contract pertains to the procurement of two valve assembly, mani units with NSN 4820014939617, to be delivered to W1A8 DLA DISTRIBUTION within 168 days of award. This is a source-controlled item requiring strict adherence to the approved drawing, with only H845-1801-B, identified by source code 96169, authorized for supply. The solicitation, numbered SPE7MC26T180P, is issued as a restricted small business set-aside under NAICS code 332911, and is exclusively available electronically via the provided SAM.gov link; no hard copies are distributed. All quotes must be submitted electronically before the response deadline of August 17, 2026, and must fully comply with the drawing specifications and applicable military standards, which can be accessed digitally through official channels. The procuring agency is DLA Land and Maritime, based in Columbus, Ohio, and designated point of contact for inquiries is listed in the solicitation document under block 5, with email correspondence directed to DibbsBSM@dla.mil.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

25--PARTS KIT,DOOR LIFT

Solicitation # SPE7L326T164S

The contract seeks procurement of a Parts Kit, Door Lift with NSN 2590012121057 under solicitation number SPE7L326T164S, issued by the DLA Land and Maritime under the Department of Defense. A total of 793 units are requested across four line items: 22, 70, and 700 units in kit form (UI KT) to be delivered to DLA Distribution Albany within 157 days, and one unit in individual assembly form (UI EA) requiring delivery within 30 days. All quotes must be submitted electronically, and the solicitation is open to all responsible sources with no restrictions beyond the specified set-aside. This is a Small Business Set Aside designated as total, meaning only small businesses may respond, and it falls under the NAICS code 336992 for other transportation equipment manufacturing. The response deadline is August 17, 2026, and all inquiries must be directed via email to the designated point of contact. The contract office is located in Columbus, Ohio, and performance is to be fulfilled at DLA Distribution Albany regardless of the vendor’s location.

Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

16--HOUSING,AIR OUTLET,

Solicitation # SPE7M426T323V

The contract solicitation seeks the procurement of five air outlet housings with NSN 1660015252213, to be delivered to the DLA Distribution Depot in Oklahoma within 168 days after award. The approved source for this item is identified as 99251 1657297-1. This is a competitive RFQ issued under solicitation number SPE7M426T323V, with responses required to be submitted electronically by the deadline of August 17, 2026. No hard copies of the solicitation are available, and no specifications, plans, or drawings are provided to offerors. All responsible sources are encouraged to submit quotes, and timely submissions will be considered without restriction. The opportunity falls under NAICS code 336413 and is managed by the Department of Defense through DLA Land and Maritime, with the contracting office located in Columbus, Ohio. Inquiries must be directed via email to the point of contact listed, and further details about the solicitation can be accessed through the provided SAM.gov link.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE