Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

HUB, WHEEL, VEHICULAR

Awarded

SPE7M1-26-U-4860Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7M1-26-U-4860 is an Indefinite Delivery Contract issued by the Defense Logistics Agency's Maritime Supply Chain for the procurement of cast iron vehicular hubs and wheels, identified by NSN 2530012645683. The contract has a maximum value of 350,000.00 dollars and an estimated annual quantity of 30 units, with a guaranteed minimum of 4 units. Deliveries must be completed within 75 days after the delivery order, with terms set as FOB Origin and inspection and acceptance occurring at the destination. The items are intended for use on mobile generator set model 200T400 and are associated with Hydraulics International, Inc. part number 99278-414. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, MIL-STD-129 for marking and labeling, and DLAD Procurement Note C03 for supply chain traceability. Packaging must comply with RP001 for palletization and ASTM D3951 for non-hazardous materials, or TQ Requirement IP025 if materials are deemed hazardous per FED-STD-313. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with NIST SP 800-171 for cybersecurity. All invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

General Info

30 wheel hubs requested under indefinite contract, max $350K, approved source only, quotes due August 14, 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

336330 - Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

2

RFQ SPE7M1-26-U-4860 for Indefinite Delivery Contract

rfq

High

SPE7M126D61TR.pdf

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedJul 30

Solicitation

Type ChangedJul 31

Solicitation → Combined Synopsis

AwardedOct 11

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Bryan Fair

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE7M126D61TR posted on DIBBS. Awardee: HYDRAULICS INTERNATIONAL, INC. (CAGE 56529) Total Contract Price: $350,000.00 Award Date: 08-26-2026 Solicitation: SPE7M1-26-U-4860 Line items: - HUB, WHEEL, VEHICULAR (NSN/Part 2530012645683, PR 1000238531)

Similar Contracts

Same NAICS industry code

KNUCKLE, STEERING

Solicitation # SPE7L1-26-T-11F5

Solicitation SPE7L1-26-T-11F5 is a Request for Quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of four steering knuckles, identified by NSN 2530016801054. The requirement falls under NAICS code 336330. Quotes must be submitted via the DIBBS system by September 24, 2026. The items are to be delivered to the West Virginia Army National Guard in Poca, West Virginia, with a required delivery date of September 10, 2026, and a delivery lead time of 20 days after order. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires compliance with DLA packaging requirements for procurement. Prohibitions are in place regarding the use of Class I ozone depleting chemicals and mercury compounds in the items or their packaging. Payment will be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and includes various FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, and cybersecurity requirements. Domestic sourcing restrictions, including the Buy American Act and Berry Amendment, may apply.

LAND SUPPLY CHAIN

POSTED

DEADLINE

TORQUE ROD, TANDEM AXLE

Solicitation # SPE7L3-27-T-0416

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

HUB, WHEEL, VEHICULAR

Solicitation # SPE7L3-26-T-288U

Solicitation SPE7L3-26-T-288U is a Request for Quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of 42 vehicular wheel hubs under NSN 2530-01-063-5666. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses certified by the Small Business Administration. The items are to be manufactured using a forging process, and the contractor must utilize an inspection system compliant with ISO 9001:2015 or an equivalent standard. Technical inspection is required at the origin, and acceptance is based on zero non-conformances in sample lots. Delivery is scheduled for June 2027, with shipments directed to DLA Distribution centers in Anniston, Alabama, and New Cumberland, Pennsylvania, under the First Destination Transportation program. The contract imposes strict regulatory and security requirements, including compliance with the Buy American Act and the Berry Amendment. Technical data associated with this item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Security mandates include CMMC Level 2 certification and adherence to NIST SP 800-171 for safeguarding covered defense information. Packaging and marking must strictly follow MIL-STD-129 and Special Packaging Instruction AK10635666, Revision E, with a total prohibition on mercury compounds. All quotes must be submitted via the DIBBS system, and payment processing is handled through Wide Area WorkFlow.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CYLINDER ASSEMBLY, UPPE

Solicitation # SPE7L3-27-T-0464

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Pneumatic Tire Wheel Rim ManufacturingThis subcontract, issued by the Department of Defense for DLA Weapons Support, requires the fabrication of 7,000 pneumatic tire wheel rims. The rims must be manufactured according to Basic Drawing NR 01365 19012E0236, Revision B, and meet NSN 2530-01-726-4582 standards. Production must utilize traditional industrial metal fabrication equipment, as additive manufacturing is strictly prohibited. The opportunity is a total small business set-aside under NAICS code 336330, with performance located in Tracy, California. To be eligible, contractors must hold CMMC Level 2 certification and maintain ITAR/EAR export control approval. Responses are due by October 19, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Grease Cap Supply (NSN 2530016923237)This subcontract involves the manufacture or procurement of 60 grease caps, part number AT-AD15K (NSN 2530016923237), to support prime contractors delivering for the Department of Defense DLA Weapons Support Land Supplier Operations. The supplier must ensure all units comply with the DLA Master List of Technical and Quality Requirements (RA001) and certify that no Class I ozone-depleting chemicals are utilized during production. The contract requires strict adherence to MIL-STD-129 and MIL-STD-2073-1E for the marking and packaging of all items. Delivery of the 60 units is specified as FOB Origin, with performance taking place in New Cumberland. The opportunity was posted on October 7, 2026, with a response deadline of October 19, 2026, under NAICS code 336330.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

PARTS KIT, POWER STEERI

Solicitation # SPE7L3-27-T-0240

Solicitation SPE7L3-27-T-0240 is a fixed-price contract issued by the Defense Logistics Agency Weapons Support Land Supplier Operations Vehicle Support for the procurement of one power steering parts kit, identified by NSN 2530011538374. The requirement specifies parts associated with Oshkosh Defense LLC P/N 2AL637 and R. H. Sheppard Co., Inc. P/N 5521921. Delivery is required within 204 days after order, with a need ship date of May 12, 2027, and an original required delivery date of October 31, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, requiring compliance with MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials require packaging according to TQ requirement IP025 and the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment requests. The solicitation is categorized under NAICS code 336330 and incorporates various FAR and DFARS clauses regarding cybersecurity, domestic material restrictions, and small business program representations.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

WHEEL ASSEMBLY, PNEUMAT

Solicitation # SPE7L4-27-T-0153

Solicitation SPE7L4-27-T-0153, issued by the DLA Weapons Support LSO Combat Vehicles and Armament, is a request for quotations for 21 pneumatic tire wheel assemblies, identified by NSN 2530-01-723-0184 and Hutchinson Industries part number AS-1609-080. The procurement is categorized under NAICS 336330. The required delivery date is October 31, 2027, with a need ship date of May 27, 2027. Delivery is established as FOB Origin, with the final destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with specific requirements for hazardous materials per FED-STD-313 and 29 CFR 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes the Buy American and Balance of Payments Program, DFARS cybersecurity reporting standards, and a prohibition on the use of additive manufacturing processes for the supplied parts.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

ARM ASSEMBLY, PIVOT, TRA

Solicitation # SPE7L3-27-T-0394

Solicitation SPE7L3-27-T-0394 is a fixed-price federal procurement issued by the DLA Weapons Support Land Supplier Operations Vehicle Support for one Arm Assembly, Pivot, Track Suspension. This item is designated as a critical application item with NSN 2530017009468 and part number 1700291119 from Foster-Miller, Inc. The procurement is governed by NAICS code 336330 and requires adherence to Technical Data Package Rev A Gen 1, as well as specific DLA technical and quality requirements RA001, RP001, and RQ011. The contract specifies a delivery period of 166 days, with a need ship date of April 4, 2027, and an original required delivery date of October 31, 2027. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. Payment and receiving reports are to be processed electronically via the Wide Area Workflow system. Compliance requirements include the Buy American Act, the Berry Amendment, and various FAR and DFARS clauses regarding cybersecurity, hazardous materials, and the prohibition of additive manufacturing unless specifically authorized. Offerors must also represent their status regarding small business concerns and certify that they will not provide covered telecommunications equipment or services.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

VALVE, RELAY, AIR PRESSU

Solicitation # SPE7L3-27-T-0349

This fixed-price solicitation, issued by the DLA Weapons Support Land Supplier Operations Vehicle Support, is for the procurement of one air pressure relay valve, identified by NSN 2530015739751 and Bendix Commercial Vehicle Systems LLC part number K037016. The contract requires delivery to DLA Distribution Red River in Texarkana, Texas, with a need ship date of May 4, 2027, and an original required delivery date of October 31, 2027. Inspection and acceptance will occur at the destination, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and payment requests. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and IPC/JEDEC J-STD-609 for component lead finish identification. Palletization must comply with DLA requirement RP001. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and mandates compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 cybersecurity assessment requirements, and hazardous material labeling under the Hazard Communication Standard.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

TIE ROD, STEERING

Solicitation # SPE7L3-27-T-0214

Solicitation SPE7L3-27-T-0214 is a request for quotations issued by the DLA Weapons Support Land Supplier Opns Vehicle Spt for the procurement of eight steering tie rods (NSN 2530-01-143-9118) intended for use with Diesel Gen 72. The contract is established as a fixed-price acquisition with delivery terms set as FOB Origin, requiring delivery to the DLA Distribution Depot at Hill AFB, Utah. The required delivery date is October 31, 2027, with a need ship date of March 14, 2027, and a delivery window of 145 days after the order. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-129 for labeling and RP001 for palletization. Non-hazardous materials must be packaged per ASTM D3951, while hazardous materials require compliance with FED-STD-313 and TQ requirement IP025. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various Federal Acquisition Regulation clauses covering combating trafficking in persons, sustainable products, and safeguarding covered contractor information systems, as well as DFARS requirements regarding the Buy American Act and cybersecurity incident reporting.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

RIM, WHEEL, PNEUMATIC TI

Solicitation # SPE7L3-27-T-0371

Solicitation SPE7L3-27-T-0371 is a total small business set-aside issued by the Defense Logistics Agency Weapons Support Land Supplier Operations Vehicle Support for the procurement of 7,000 pneumatic tire wheel rims under NSN 2530-01-726-4582. The contract requires adherence to Basic Drawing NR 01365 19012E0236, Revision B, and prohibits the use of additive manufacturing unless specifically approved. Delivery is required within 168 days, with a need ship date of April 6, 2027, and a final required delivery date of October 31, 2027, to DLA Distribution San Joaquin in Tracy, California. Inspection and acceptance will occur at the point of origin. The procurement involves strict compliance and security requirements, including CMMC Level 2 certification and approved US/Canada Joint Certification Program certification due to export-controlled technical data subject to ITAR or EAR. Contractors must follow MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Financial administration is managed through the Wide Area WorkFlow system for electronic invoicing and receiving reports. Additionally, the contract incorporates the Buy American Act and Berry Amendment restrictions, and requires compliance with hazardous material labeling standards under 29 CFR 1910.1200.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Specialized Freight & Oversized HaulingThis subcontract for Specialized Freight and Oversized Hauling supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves the loading, securing, and transportation of six completed oversized portable buildings from the manufacturer to various delivery points across the continental United States. The contractor is required to utilize flatbed trailers and cranes to execute these movements and must maintain all necessary DOT certifications for hauling oversized loads. This effort falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Containment Liners & Sump SystemsThis subcontract involves the manufacture, supply, and installation of secondary containment systems for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the production and fitting of chemical-resistant liners or integrated sump basins, constructed from HDPE or other chemical-resistant polymers, for the base of two-tier hazardous material storage structures. The project specifically entails the delivery of integrated containment basins and liners for six units. All deliverables must strictly adhere to EPA and OSHA standards for secondary containment to ensure safety and regulatory compliance. The contract is categorized under NAICS code 339999 and is managed through the Department of Defense. Interested parties should note the response deadline of October 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Specialized Steel Fabrication & AssemblyThis subcontract for Specialized Steel Fabrication and Assembly involves the production of structural frames and housings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work focuses on the precision cutting, welding, and assembly of industrial steel components to create Two-Tier Portable Hazardous Material Storage Buildings, specifically part number 30B-TT. Deliverables include the completed structural shells, which must feature two-tier shelving and outer protective shells finished with corrosion-resistant paint. All fabrication must strictly adhere to DLA safety specifications regarding hazardous material containment. This opportunity falls under NAICS code 332312 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-306D

Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LIMITER, ELECTRICAL NOI

Solicitation # SPE4A7-27-Q-0040

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A7-27-Q-0040 for the procurement of six electrical limiters. The items are identified by NSN/Part Number 5895-01-447-6061 and are associated with purchase request 7017409225. This federal solicitation was posted on October 9, 2026, with a response deadline set for October 19, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305Z

Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.

Industrial Valve Manufacturing

POSTED

DEADLINE

COMPRESSOR UNIT, REF

Solicitation # SPE8E8-26-T-5747

Solicitation SPE8E8-26-T-5747 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one compressor unit, ref, identified by NSN 4130-01-518-3693. This is a Foreign Military Sales requirement for the Egyptian Navy, with the final shipping destination located in Alexandria, Egypt, via a freight forwarder at the Amentum Warehouse in Fredericksburg, Virginia. The procurement falls under NAICS code 333415 and may be eligible for automated award, with a specific price evaluation preference for HUBZone concerns. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Delivery is required within five days after receipt of order, with both inspection and acceptance occurring at the point of origin. Key compliance requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware, except where functionally required and specified. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-307E

Solicitation SPE7MC-26-T-307E is a request for quotations issued by the Defense Logistics Agency Land and Maritime for one safety relief valve, identified by NSN 4820015062499. The required hardware is a 3.000 inch valve with a bronze body and a pressure range of 45-75 PSI, specifically referencing Dante Valve Company part numbers BASHH05SKK and D3000FF ASSY BASHH05SKK. The government notes that manufacturing may require casting, forging, and special tooling, which may not be provided. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components specified by NAVSEA. The contract stipulates a delivery timeframe of 20 days after order, with an original required delivery date of September 15, 2026. Delivery is FOB Origin and destined for the USS KEARSARGE LHD 3 via the First Destination Transportation program. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted through the DIBBS system, and the successful contractor must use the Wide Area WorkFlow system for electronic invoicing and payment requests.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE3SE-26-Q-0501

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5755

Solicitation SPE8E8-26-T-5755 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support for the procurement of one End Plate, identified by NSN 4630011200494. This critical application item is designed for use with Air Master Products Corp Sewage Comminutor Model No. AMS5600 and Poseidon Submarine Air Pack Products Corp equipment. The requirement is an Foreign Military Sales procurement for Taiwan, with a required delivery date of July 16, 2025, and a delivery timeline of five days after order. Inspection and acceptance are both designated at the point of origin. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking compliant with MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Notable material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and representations concerning telecommunications equipment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305P

Solicitation SPE7MC-26-T-305P is a fixed-price request for quotation issued by the Defense Logistics Agency Land and Maritime for three stainless steel check valves, identified by NSN 4820009465482. These critical application items are designed for use in H-60 and RH-53 Sikorsky helicopters and must support a maximum operating temperature of 275 degrees Fahrenheit. Technical specifications require a 3/8 inch outer diameter and 9/16 inch right-hand thread on both ends, with mounting capabilities for horizontal and vertical bulkhead positions. Approved part numbers include Crissair Inc 2C 7390-6J and Sikorsky Aircraft Corporation SS70-912K6C or SS70-912K6J. The contract is a Foreign Military Sales requirement for the Government of Israel Ministry of Defense, with delivery coordinated through G&B Packing Company in Jersey City, New Jersey. Delivery is required within 20 days, with inspection and acceptance occurring at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted via the DLA Internet Bid Board System, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports.

Industrial Valve Manufacturing

POSTED

DEADLINE

BALL, VALVE, PORTED

Solicitation # SPE7MC-26-T-255C

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS