WHEEL ASSEMBLY, PNEUMAT

WHEEL ASSEMBLY,PNEUMATIC TIRE
WHEEL, PNEUMATIC TIRE
IN ACCORDANCE WITH CID, "WHEELS AND HUBS FOR INDUSTRIAL PNEUMATIC
TIRES", A-A-59494-0E0. SIZE 6.00-9.
ITEM TO BE PAINTED AS FOLLOWS:
PRIME WITH MIL-P-23377, TYPE 1, CLASS 2 (QPL ITEM)<(>,<)>
OR MIL-P-85582 (QPL ITEM) OR
MIL-P-53030 (QPL ITEM)
PAINT WITH MIL-C-85285, SEMI-GLOSS (QPL ITEM)<(>,<)>
COLOR CODE 24052, DARK GREEN, FED-STD-595.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
SPE7M4-27-T-2496
SECTION B
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC CID A-A-59494C REVISION NR C DTD 01/22/2021 PART PIECE NUMBER: P/N:AA59494-0E0
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE STD NR MIL-STD-130N(1) NOT 1 REVISION NR N DTD 08/26/2019 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019023846 0001 EA 460.000
NSN/MATERIAL:2530005287224
DELIVERY (IN DAYS):0066
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:49
WRAP MAT:GC CUSH/DUNN MAT:JC CUSH/DUNN THKNESS:F
UNIT CONT:ED OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:004
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
Wheels shall INCLUDE all of the necessary bolts, lock-washers, and nuts
SPE7M4-27-T-2496
SECTION B
PR: 7019023846 PRLI: 0001 CONT’D
required for assembly of the two halves.
PRIOR HISTORY OF DAMAGE: ITEM SHALL BE INDIVIDUALLY AND PROPERLY PRESERVED, WRAPPED, CUSHIONED, AND PACKAGED AS SPECIFIED IN THE PREP FOR DELIVERY PACKAGING REQUIREMENTS TO PREVENT DAMAGE, CORROSION, AND/OR DETERIORATION. PACKAGE DESIGN MUST IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. CUSHIONING MATERIAL SHALL ENSURE IT DISPLACES ITEM WEIGHT EVENLY AND PROTECT ITEM FROM SHOCK AND NO DAMAGE TO RIMS OCCURS. ANY LOOSE ITEMS WHICH HAVE DISSIMILAR METALS SHALL BE SEPARATED AND SHALL NOT MAKE CONTACT WITH EACH OTHER TO PREVENT CORROSION DURING STORAGE. HARDWARE SHALL BE BAGGED & IMMOBILIZED. PACKAGE DESIGN SHALL IMMOBILIZE ITEM WITHIN CONTAINER TO ADEQUATELY PACKAGE AND PROTECT ITEM. UNIT CONTAINER SELECTION SHALL ADEQUATELY CONTAIN AND PROTECT MATERIAL.
IP025: PACKAGING, MARKING, AND SHIPPING OF HAZARDOUS MATERIALS
PARCEL POST ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3113
DLA DISTRIBUTION CHERRY POINT
PHANTOM RD BLDG 147 BAY A
CHERRY POINT NC 28533-5040
US
Need Ship Date:11/05/2026 Original Required Delivery Date:04/02/2027
SPE7M4-27-T-2496 NSN/Part Number: 2530-00-528-7224 Quantity: 460 EA Purchase Request: 7019023846QTY: 460 Delivery: 66 days ADO