Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRING HARNESS, BRAN

Active
SPE7LX-26-U-9481Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a wiring harness, BRAN, with part number 22-02830-00 and NSN 2590-01-722-6973, for a quantity of 16 units under solicitation SPE7LX-26-U-9481. Delivery is required within 78 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA Direct, CONUS, and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications. Ozone-depleting chemicals are strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. All packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization following DLA Packaging Requirements for Procurement, and the unit of issue is each (EA). The contract price is $16.00 per unit, totaling $256.00, with the purchase request number 1000239548. The supplier must ensure all packaging and marking meet the specified DLA standards, and the DLA Master List takes precedence over all other requirements. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.

General Info

Procure 16 wiring harnesses NSN 2590017226973 from approved source, deliver in 78 days, one-year IDIQ possible.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
Theodore Misiolek
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS,BRAN
WIRING HARNESS,BRAN
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
CARRIER CORP 10855 P/N 22-02830-00
LINE ITEM 0000000001 TYPE OF COVERAGE: DLA DIRECT, CONUS
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 1000239548 0001 EA 16.000
This is an estimated quantity and may not be purchased by the IDC.
NSN/MATERIAL:2590017226973
DELIVERY (IN DAYS):0078
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
SPE7LX-26-U-9481
SECTION B
PR: 1000239548 PRLI: 0001 CONT’D
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

SPE7LX-26-U-9481 NSN/Part Number: 2590-01-722-6973 Quantity: 16 EA Purchase Request: 1000239548QTY: 16 Delivery: 78 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
Federal
BF - Nationwide - Dish Machines - 26Z7AH5The Federal Prison System, under the Department of Justice, has issued a nationwide forecast for dish machines under the NAICS code 333310, with a small business total set-aside designation, meaning only small businesses are eligible to compete for this opportunity. The contract is anticipated to support the Bureau of Prisons across all facilities nationwide, with no specific location restricting performance. The solicitation has been posted as a forecast, indicating it is in the planning phase and not yet open for bids, with a posted date of August 10, 2026. Point of contact for technical inquiries is A. Bradley, reachable at abradley1@bop.gov, while Sarah Dean serves as the Small Business Specialist for guidance on small business participation and program requirements. The opportunity is intended to provide essential dish washing equipment to maintain sanitation standards across federal correctional institutions.
Federal Prison System / Bureau Of Prisons

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333310
New
Federal
BF - Nationwide - Oven replacement - 26Z7AH6The Federal Prison System under the Department of Justice has issued a forecast for a nationwide oven replacement contract, targeted exclusively for small businesses through a Small Business Total Set-aside. The North American Industry Classification System code 333310 indicates the contract relates to commercial and industrial machinery and equipment manufacturing, suggesting the replacement ovens will be purpose-built for institutional use. The place of performance is nationwide, meaning work will occur across all federal prison facilities under the Bureau of Prisons jurisdiction, with no single location specified. The opportunity is posted as a forecast, indicating it is not yet an active solicitation but provides early notice for interested small business contractors to prepare for upcoming procurement. Point of contact for general inquiries is A. Bradley at abradley1@bop.gov, while Sarah Dean serves as the Small Business Specialist to assist eligible small businesses with program guidance and participation. The forecast was posted on August 10, 2026, and more information can be found on the Department of Justice’s contracting opportunities portal.
Federal Prison System / Bureau Of Prisons

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333310
New
Federal
LEEDs MicroscopesThe U.S. Department of Justice, through its ATF Acquisition and Property Management Division, has forecasted a sole source procurement under the 8(a) program for LEEDs Microscopes, with the North American Industry Classification System code 333310 indicating specialized instrumentation manufacturing. The contract is designated as an 8(a) Sole Source, meaning it is reserved exclusively for a small business certified under the Small Business Administration’s 8(a) Business Development program, with no competitive bidding anticipated. The anticipated place of performance is Wichita, Kansas, and the procurement is targeted for future award, with the opportunity posted on August 10, 2026. Steven D. Jaimes is listed as the primary point of contact for technical and procurement inquiries, reachable via email at steven.jaimes@atf.gov, while John R. Klar serves as the Small Business Specialist supporting the 8(a) requirement and can be contacted at john.klar@atf.gov. The contract is not tied to a solicitation number as it remains in the forecasting stage, indicating that detailed requirements, budgetary allocation, and timelines are still being developed. Interested parties must be 8(a)-certified small businesses to be eligible, and all communications or proposals must be directed through the designated contacts provided, as no formal solicitation has been issued at this time.
ATF Acquisition And Property Management Division

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333310
New
Federal
Leica Microscopes (Active BPA)The contract under the title Leica Microscopes (Active BPA) is a forecasted acquisition targeting advanced microscopy equipment, specifically Leica microscopes, to support operational needs within the Department of Justice’s ATF Acquisition and Property Management Division. The procurement is classified under NAICS code 333310, indicating a focus on laboratory and diagnostic equipment manufacturing, and is expected to be executed through a Blanket Purchase Agreement to streamline future ordering. The place of performance is set in Wichita, Kansas, with all deliveries and installations to be completed at this location. While no solicitation number or set-aside details are currently available, the contract opportunity is intended for open competition without restrictions based on small business status. Points of contact for inquiries include Steven D. Jaimes as the primary point of contact and John R. Klar as the Small Business Specialist, both reachable via official email addresses provided. The forecast was posted on August 10, 2026, and stakeholders are encouraged to monitor the official DOJ contracting portal for updates on the formal solicitation.
ATF Acquisition And Property Management Division

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333310
New
Federal
Wescam MX-series Airborne Surveillance Camera - 2026-SG-0021The Department of Justice's Drug Enforcement Administration is planning to procure Wescam MX-series airborne, gyro-stabilized surveillance cameras as indicated in contract forecast 2026-SG-0021. This contract, identified under the NAICS code 333310, involves the purchase of advanced airborne surveillance technology designed for gyro-stabilized imaging, enhancing airborne operational capabilities. The solicitation was posted on May 25, 2026, and is currently in the forecast stage without a specified solicitation number or set-aside type. The procurement aims to support the DEA’s efforts in improving surveillance and intelligence-gathering from airborne platforms. While specific details about performance locations or contract type are not provided, interested parties, especially small businesses, can contact the DEA Small Business Program for further information using the provided email addresses. This investment highlights the agency’s focus on leveraging sophisticated technology to support law enforcement operations.
Drug Enforcement Administration

POSTED

about 11 hours ago

DEADLINE

N/A
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L1-26-T-948Y
The solicitation seeks one unit of a vehicular bracket with NSN 2590-01-680-6104 under contract number SPE7L1-26-T-948Y, with a required delivery within 20 days after delivery order issuance, FOB destination to Fort Riley, 66442-0000. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements and must comply with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and specific preservation methods including QUP 001, PRES MTHD 10, and CLNG/DRY 1. Technical data associated with this item is restricted under an OSHKOSH DEFENSE, LLC license agreement, requiring vendors to complete and return forms from the 35 OSHKOSH DEFENSE, LLC License Agreement folder and adhere to data non-disclosure and destruction conditions. Export-controlled technical data is governed by DFARS 252.225-7048, restricting access to contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and prior DLA approval—DLA will not delay award for such approvals. The item is classified under NAICS 333310, and while full and open competition applies, offers may not include parts produced via additive manufacturing unless specifically authorized. The contract incorporates numerous DFARS and FAR clauses covering cybersecurity safeguards including DFARS 252.204-7012 and NIST SP 800-171 requirements, whistleblower protections, export controls, hazardous material labeling, prohibition of hexavalent chromium, and restrictions on procurement from communist Chinese military companies. Inspection and acceptance occur at the origin per FAR 52.246-2, and electronic invoicing through WAWF is mandatory. The contractor must comply with the Buy American Act, represent its small business status in SAM, and certify compliance with telecommunications equipment prohibitions and cybersecurity controls. The submission deadline is August 21, 2026, and quotations are informational and not binding offers.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, H
Solicitation # SPE7L3-26-T-170V
The contract solicitation SPE7L3-26-T-170V is for the procurement of one unit of a MANIFOLD ASSEMBLY,H with NSN 2590016802969 and part number PX92992A from TWIN DISC, INCORPORATED. The item is designated as a commercial item and requires delivery within 20 days of the award, with an original required delivery date of August 10, 2026. Deliveries must be shipped FOB Origin, and the freight shipping address is designated as NOLF IB BLDG 184 in Imperial Beach, CA, while the parcel post address is listed as a PO Box in San Diego, CA. The item is subject to strict packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, with a specified pack code of U and unit container type D3. Special marking is not required, and palletization must adhere to DLA Packaging Requirements. The contractor must ensure no Class I Ozone Depleting Chemicals are used in the manufacturing or assembly of the item, a prohibition that overrides any conflicting specification requirements, and any substitute chemicals must be pre-approved unless explicitly permitted by the specification. Inspection and acceptance will occur at the destination point under FAR 52.246-2, and all invoicing must be processed through the WAWF electronic system using the appropriate documentation for fixed-price line items. Hazardous materials, if any, must be labeled in accordance with OSHA’s Hazard Communication Standard, and radioactive materials must be marked as specified in MIL-STD-129. Offerors must be registered in SAM and submit accurate representations regarding small business status, and all responses must be submitted through the DIBBS portal by August 21, 2026. The contract is not a small business set-aside, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The contracting officer, Lee Miller, is the point of contact and is based in Columbus, Ohio.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
Federal
(12) 3 ft^3 Demineralizers; Portsmouth Naval Shipyard, Kittery, Maine
Solicitation # N39040Q6189V257
Portsmouth Naval Shipyard in Kittery, Maine is seeking industry input on the potential procurement of twelve 3 cubic foot demineralizers under a firm fixed price contract, with all technical requirements detailed in the attached Statement of Work and specifications. The solicitation is currently a sources sought notice for market research only, intended to identify qualified vendors capable of meeting the precise engineering and operational standards outlined in the documents, including drawing M-1217A and OPSEC requirements. Respondents must hold an active CAGE code, be registered in SAM.gov, and not be excluded from federal contracting, while also demonstrating full compliance with the technical specifications provided in the attachments. The procurement is classified under NAICS code 333310 with a small business size standard of 1,000 employees, and only entities able to submit a capabilities statement, marketing materials, and complete entity information—including company name, CAGE code, tax ID, point of contact details, and business size/type—are invited to respond. The government has explicitly stated this notice does not constitute a commitment to issue a solicitation or award a contract, nor will it reimburse respondents for any preparatory costs. Responses are due by August 13, 2026, and while an official solicitation may later be posted on SAM.gov using an SF 1449 form, any response to this notice is not considered a binding offer under FAR guidelines.
Portsmouth Naval Shipyard Gf

POSTED

about 22 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
Federal
42--PARTS KIT,LITTER FLOTA
Solicitation # SPE8E626T4185
The U.S. Department of Defense through DLA Troop Support is seeking quotes for 45 Parts Kits, Litter Flota, identified by NSN 4220013296420, to be delivered to DLA Distribution at location W1A8 with a delivery timeline of 15 calendar days after award. The solicitation, designated SPE8E62964185, is an RFQ posted on August 10, 2026, with responses due by August 21, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. The approved source for this item is 64249 101, and no specifications, plans, or drawings are provided. All responsible suppliers may submit quotes, which will be evaluated if received before the deadline. The procurement falls under NAICS code 333310 and is issued by the Office of DLA Troop Support based in Philadelphia, PA. For questions, bidders must contact the designated buyer via the email provided in the solicitation’s block 5, accessible through the SAM.gov portal or DIBBS website using the solicitation number.
DLA Troop Support

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333310
New
Federal
NOM: Controller, Engaging; WSDC: [EEN]/ END ITEM: E2/C2 All Series; PR: 7013431353 NSN: 6615-017054822: IAW P/Ns: 123AV91430-501 & 123SCAV101-9 & 1781327-5 ;
Solicitation # SPE4A626R0285
The U.S. Department of Defense, through DLA Aviation in Richmond, Virginia, is conducting market research to identify qualified vendors capable of manufacturing the Controller, Engaging (NSN 6615-017054822) with associated part numbers 123AV91430-501, 123SCAV101-9, and 1781327-5. This effort requires full new manufacture including procurement of components, inspection, testing, preservation, packaging, and shipping, along with supply chain management, production forecasting, mitigation of diminishing manufacturing sources, and logistics coordination. The NAICS code 333310 applies, and the estimated requirement is four units. While no solicitation or funding is currently available, responses will inform whether the requirement will be set aside for small businesses or pursued through full and open competition, potentially with multiple awards. Interested parties must submit organization details, capability statements with supporting documentation, and details on any anticipated subcontracting or teaming arrangements by 3:00 PM EST on August 15, 2026, to Lionel Allamby Jr. at lionel.allamby@dla.mil. All submissions are voluntary, and the government assumes no obligation or financial responsibility for response preparation or costs incurred. Information provided will be evaluated for technical capacity, project management effectiveness, cost control, personnel retention, and ability to perform under a performance-based service acquisition framework. No feedback or evaluations will be provided to respondents, and telephone inquiries are not accepted.
DLA Aviation

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
Federal
RFQ HALO 5 Whole House Water Filtration & Conditioning System PN: H5-125
Solicitation # 47QSSC-26-Q-0203
The General Services Administration’s Assisted Contracting Branch B is soliciting quotes for the supply and installation of three HALO 5 Whole House Water Filtration & Conditioning Systems (Part Number H5-125) under RFQ 47QSSC-26-Q-0203, with responses due by August 3, 2026, at 5:00 PM EDT. The requirement is not set aside for any small business or socioeconomic category and is being procured under FAR Part 12 for commercial items, using a Lowest Price Technically Acceptable (LPTA) source selection method. Offerors must submit fully completed and signed RFQ forms via email to the designated point of contact, and only proposals received by the deadline will be considered. Systems must be new, unused, and delivered FOB Destination to the Naval Health Research Center in San Diego, California, with title and risk of loss transferring upon acceptance at the delivery site. Technical compliance requires adherence to the product’s salient characteristics and installation requirements, including submission of manufacturer specifications to confirm equivalency if applicable. All deliveries must comply with GSAM 552.211-75 and ASTM D-3951 for commercial packaging, with mandatory adherence to MIL-STD-129R for labeling, marking, and barcoding using 2D PDF417 barcodes on all containers. Packaging must include proper preservation, hazard labeling per DOT HMR and OSHA HCS, and approved wood packaging treated and stamped per GSAM 552.211.89. Contractors must affirm compliance with federal regulations including the Buy American Act, Service Contract Act, Fair Labor Standards Act, and prohibitions on trafficking in persons and conflict of interest. Electronic Funds Transfer is required for payment, and all contractors must hold an active UEI and SAM registration. Failure to meet any administrative or technical requirement will result in disqualification, and award will be made solely to the lowest-priced offeror whose proposal passes all mandatory compliance criteria.
Gsa/fas/gss/qscbd/assisted Contracting Branch B

POSTED

about 22 hours ago

DEADLINE

in about 11 hours
View Details
NAICS: 333310
New
Federal
66--HELMET OPTICS ASSEM
Solicitation # SPE7LX26U9446
The solicitation seeks quotes for 14 units of HELMET OPTICS ASSEM with NSN 6650014630568 under contract number SPE7LX26U9446, with a response deadline of August 25, 2026. This procurement is conducted as an RFQ through SAM.gov, with no hard copies available and no technical specifications, plans, or drawings provided. The contract may result in an Automated IDC with a one-year term or until aggregate orders reach $350,000, whichever comes first, with a guaranteed minimum of two orders annually and an estimated two orders per year. Deliveries will be shipped to various CONUS and OCONUS DLA depots via consolidated and containerized points. The approved source is listed as 0WEC9 10098931-104, and all responsible suppliers may submit electronic quotes by the deadline. The solicitation is open to competition without set-aside restrictions, and inquiries must be directed to the designated point of contact via email. The contracting office is located in Columbus, Ohio, under the DLA Land and Maritime branch of the Department of Defense.
DLA Land And Maritime

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332722
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9451
This contract pertains to the procurement of a commercial off-the-shelf item identified as AM-01-3 by Ameritape LLC, with NSN 5340015599845, under solicitation SPE7LX-26-U-9451. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, requiring strict adherence to MIL-STD-130N for identification marking and MIL-STD-129 for packaging and labeling, including the special marking code 32 for shelf-life compliance. Packaging must conform to MIL-STD-2073-1E with specific preservation methods, containment, and palletization per DLA’s procurement requirements. The quantity is fixed at 169 units with zero variance allowed, delivered FOB origin within 116 days, with inspection and acceptance occurring at destination. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are verified at Level VII or AQL 0.1. The contract is subject to DLA’s Master List of Technical and Quality Requirements, with Covered Defense Information applicable. This is a total small business set-aside under NAICS code 332722, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327999
New
DIBBS
KNOB
Solicitation # SPE7LX-26-U-9366
The contract pertains to the procurement of a KNOB with NSN 5355-00-072-1991 and part number 247039, supplied by C&H HYDRAULICS INC under a Women-Owned Small Business Set-Aside solicitation numbered SPE7LX-26-U-9366. The request is for 25 units, each to be delivered FOB origin within 191 days, with no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The unit of issue is each, and inspection and acceptance occur at the destination. The contract specifies a unit price of $25.00, totaling $625.00, and confirms this is an estimated quantity subject to change. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, PACKING
Solicitation # SPE7LX-26-U-9382
This contract pertains to the procurement of 2,717 units of RETAINER, PACKING with NSN 5330-01-154-7159 under solicitation SPE7LX-26-U-9382, issued as a Total Small Business Set-Aside. The requirement mandates compliance with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the controlling revision determined by the solicitation issue or award date depending on acquisition size. The item is explicitly prohibited from containing any asbestos as defined in Fed-Std-313 and has been approved for manual exclusion from the First Destination Packaging Program, meaning it is not eligible for standard commercial packaging and must meet proprietary packaging specifications. Delivery must be completed within 94 days after award, and all supplies must be free of government identification if not accepted. The procurement is managed by the Strategic Acquisition Program Directorate under the Department of Defense, with Theodore Misiolek listed as the primary point of contact. The NAICS code is 339991, indicating the item falls under Other Miscellaneous Manufacturing, and the solicitation was posted on August 10, 2026, with responses due by August 25, 2026.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 339991
New
DIBBS
SEAL, PLAIN
Solicitation # SPE7LX-26-U-9417
This contract is for the supply of SEAL, PLAIN items under solicitation SPE7LX-26-U-9417, designated as a total small business set-aside with a NAICS code of 339991. The items are identified by NSN 5330-01-282-0909 and part numbers 063000143 and A-000-232-113-000, with a total quantity of 14 units delivered in a single line item at a unit price of $14.00. Delivery is required within 112 days from the origin point under FOB terms, with no variance permitted in quantity, and both inspection and acceptance occur at the destination. The item is classified as a critical application with a non-extendable shelf life of 180 months, requiring at least 85% of that shelf life to remain at the time of delivery. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, opaque bag, and must adhere to MIL-STD-2073-1E for preparation and MIL-STD-129 for marking—with special marking code 32 indicating Type I shelf-life status. Palletization follows DLA’s packaging requirements, and intermediate containers must meet MIL-P-4861 specifications. The contract strictly prohibits the use of ozone-depleting chemicals and intentional addition of mercury or mercury compounds, except for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, and certain reagents approved by NAVSEA. Mercury-containing portable lamps and instruments must have shockproof construction and a secondary containment barrier as defined by NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Configuration changes require formal engineering change proposals, and any deviations or waivers must be formally requested. The item is subject to Covered Defense Information protocols, and packaging and shipping of hazardous materials must follow IP025 standards. All documentation and markings must conform to MIL-STD-130N for identification of U.S. military property and the contract uses the DoD-authorized unit of issue as defined in official DLA resources.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336320
New
DIBBS
GENERATOR, ENGINE ACCES
Solicitation # SPE7LX-26-U-9365
This contract pertains to the procurement of a generator engine accessory, specifically an alternator, identified by NSN 2920000969252 and part numbers 19020208 and 20039, with a required quantity of seven units. The item is classified as a critical application item and will be delivered FOB origin within 69 days under DLA Direct, CONUS coverage. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow DLA Packaging Requirements for Procurement, with a unit of issue of each and a quantity per unit pack of one. The quantity variance is strictly zero percent, meaning no overages or shortages are permitted. Inspection and acceptance occur at the destination, and government identification must be removed from any non-accepted supplies. The contract was issued under solicitation number SPE7LX-26-U-9365 with a response deadline of August 25, 2026, and the item falls under NAICS code 336320. The Point of Contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acq Program Directorate.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332994
New
DIBBS
PEDESTAL, GUN MOUNT
Solicitation # SPE7LX-26-U-9488
The contract pertains to the procurement of a pedestal gun mount, identified by NSN 1005131229621 and part number 3634001650 from FN HERSTAL S.A., with a quantity of six units to be delivered within 294 days via FOB origin terms. The acquisition is categorized as a DLA Direct, CONUS contract under solicitation SPE7LX-26-U-9488, and the quantity is fixed with no variance allowed—zero percent plus or minus. Inspection and acceptance both occur at the destination, and packaging must strictly conform to MIL-STD-2073-1E with specific packaging methods, materials, and controls including unit containers designated as E5 and packaging code U. Marking must comply with MIL-STD-129 and includes no special marking codes. The item is subject to DLA’s packaging requirements and requires full supply chain traceability documentation to be retained by the contractor as mandated by DLAD Procurement Note C03 issued in August 2016. Additionally, the contract incorporates technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, and is governed by the revision of the master in effect on the solicitation issue date. The unit of issue is each (EA), and the unit price is not explicitly listed but the total price is calculated based on the fixed quantity. The contract is under the authority of the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek designated as the primary point of contact.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
DIBBS
WHEEL ASSEMBLY, PNEU
Solicitation # SPE7LX-26-U-9504
The contract pertains to the procurement of 123 units of a pneumatic wheel assembly identified by NSN 2530-01-650-9611 and part number 03018 manufactured by TRU-HITCH, INC. Deliveries are due within 73 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination. The quantity is firm with no variance allowed, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 for marking, while preservation follows MIL-DTL-4M for non-airplane tires. Palletization is required if total shipment weight exceeds 125 lbs, per MIL-HDBK-774. All packaging and preservation methods must adhere to DLA’s specific requirements, including the use of special marking code ZZ indicating 32-type I shelf-life lot markings as mandated by the specification. The item carries a non-extendable shelf life of 72 months as defined by RS001 and RS024. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. This procurement falls under a total small business set-aside with NAICS code 336330, issued by the Department of Defense’s Strategic Acquisition Program Directorate, and is subject to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, and contract performance is limited to the contiguous United States under DLA direct coverage.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
SPRING, HELICAL, EXTE
Solicitation # SPE7LX-26-U-9435
The contract pertains to the procurement of 108 helical extension springs identified by NSN 5360-01-564-9094 under solicitation SPE7LX-26-U-9435, with a response deadline of August 25, 2026, and a delivery requirement of 78 days after award. The acquisition is a total small business set-aside under NAICS code 332722, managed by the Department of Defense's Strategic Acquisition Program Directorate. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The item includes technical data subject to export control under ITAR or EAR, requiring strict handling protocols, including prior authorization for disclosure to foreign persons, even within the United States. Contractors must hold approved US/Canada Joint Certification Program status, complete required DLA training, and pass a questionnaire to gain access to controlled data, as mandated by DFARS 252.225-7048. Packaging must adhere to DLA standards, and any configuration changes require formal engineering change proposals or variance requests. Government identification must be removed from non-accepted supplies, and all data handling must comply with export control regulations applicable to both U.S. entities and their foreign subsidiaries. The point of contact for this solicitation is Theodore Misiolek, reachable via the provided email and phone number.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 333612
New
DIBBS
CABLE ASSEMBLY, CONT
Solicitation # SPE7LX-26-U-9467
The contract pertains to the procurement of a cable assembly, control, with part number MEA-25000-5505 and NSN 3040-01-670-1299, for a quantity of 140 units at a unit price of $140.00, resulting in a total price of $19,600. The item is procured under a DLA Direct, CONUS coverage arrangement, with delivery required within 128 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific methods for preservation, wrapping, and containerization, with labeling adhering to MIL-STD-129 without special markings. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract is issued under solicitation number SPE7LX-26-U-9467, with a response deadline of August 25, 2026, and is classified under NAICS code 333612. The point of contact is Theodore Misiolek from the Strategic Acquisition Program Directorate within the Department of Defense.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
DIBBS
HOOD, ENGINE COMPARTMEN
Solicitation # SPE7LX-26-U-9392
The contract pertains to the procurement of a hood for the engine compartment of M-915A3 and M-916A1 military trucks, supplied by FREIGHTLINER OF SAVANNAH, INC. under part number A17-12443-004G and NSN 2510-01-327-7717. The requirement is for 62 units to be delivered FOB origin within 90 days, with no tolerance for quantity variation. The delivery is subject to DLA direct, CONUS coverage, and inspection and acceptance occur at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with specific handling instructions requiring the use of the U pack code, mechanical handling, and an upward arrow marking indicating which side to open. The ISPM 15 heat treatment stamp is mandatory and non-negotiable for international compliance, with failure to comply risking shipment rejection. The hood must not contain any Class I ozone-depleting chemicals, superseding prior specification requirements unless an alternative is explicitly authorized. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. The contract was issued under solicitation SPE7LX-26-U-9392 as a Service-Disabled Veteran-Owned Small Business Set-Aside, with Theodore Misiolek designated as the primary point of contact.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335999
New
DIBBS
CABLE, INPUT, AIRCRAF
Solicitation # SPE7LX-26-U-9456
This contract covers the procurement of a cable input component for aircraft under solicitation SPE7LX-26-U-9456, with a quantity of twelve units to be delivered within seventy-seven days FOB origin. The item is identified by NSN 6130-01-562-5471 and is subject to strict technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, which override any other standards unless explicitly superseded. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization following DLA’s packaging directives, and no variance in quantity is permitted. The product must be free from intentional introduction of mercury or mercury-containing compounds, except for approved exceptions such as batteries, fluorescent lamps, sensors, and specific instrumentation as defined by NAVSEA, with portable devices containing mercury requiring shock-proof design and a secondary containment boundary per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stipulated. Certification requirements include a CMMC Level 2 Self-Assessment, and all supplies must adhere to the cybersecurity and quality provisions listed under RD002, RD004, RA001, and RQ011. The contract is issued under DLA Direct, CONUS coverage with a unit of issue of each, and delivery is for a fixed quantity with no allowance for over or short shipment.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9422
This contract, identified by solicitation number SPE7LX-26-U-9422, is a total small business set-aside under NAICS code 332510 for the procurement of 41 units of COVER, ACCESS with NSN 5340-01-273-4626, requiring delivery within 116 days of award. It incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Sampling protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be submitted for approval unless explicitly authorized. The contract imposes stringent cybersecurity requirements mandating CMMC Level 2 certification and compliance with DFARS 252.225-7048 for the handling of export-controlled technical data subject to ITAR or EAR, restricting access to contractors with approved JCP certification, completed DOD training, and DLA authorization. Technical data export restrictions apply equally to foreign nationals both within and outside the United States, including foreign subsidiaries of U.S. companies, and non-accepted supplies must have all government identification removed. The primary point of contact for the awarding agency, the Strategic Acquisition Program Directorate under the Department of Defense, is Theodore Misiolek.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details