Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

26RFP67 Mowing / Landscape Maintenance Services

Active
26RFP67State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Williamson County, operating under the agency name Wilco in Texas, is soliciting proposals for Mowing and Landscape Maintenance Services through solicitation number 26RFP67, posted on July 22, 2026, with responses due by August 25, 2026. All proposals must comply with the detailed requirements outlined in the RFP, and contracts valued above $100,000 require a bid bond equal to five percent of the total contract amount. Services are to be performed within Williamson County, Texas, and inquiries should be directed to Fernando Ramirez, the primary point of contact, at fernando.ramirez@wilcotx.gov. Submissions must be made via the designated online portal at https://wilco.bonfirehub.com/opportunities/243342.

General Info

Williamson County seeks mowing and landscape services via RFP 26RFP67, due August 25, 2026, with $100K+ contracts requiring 5% bid bond.

Agency

Texas → WilcoView Agency

NAICS

561730 - Landscaping ServicesView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(16)

Williamson County Parks Dept Mowing Area Maps 2027

DOCX•specifications

26RFP67 Price Bid Sheet for Landscape Maintenance Services

XLSX•price-bid-sheet

26RFP67 Mowing Landscape Maintenance Services RFP

DOCX•rfp

Transmittal Letter for RFP Response

DOCX•transmittal-letter

Proposal Affidavit Certifications Texas Government Code rev.081325

PDF•proposal-affidavit

Master Services Agreement Template - Williamson County

PDF•contract-document

Executive Summary for RFP Proposal

DOCX•executive-summary

Schedule 1 - Mowing Landscape Service Frequencies for Williamson County Parks

DOCX•schedule

Proposed Methodology for Williamson County RFP

DOCX•proposed-methodology

Williamson County Parks Dept Mowing Landscape Maintenance RFP 2027

DOCX•rfp

Form CIQ - Conflict of Interest Questionnaire for Local Government Vendor

DOCX•conflict-of-interest-questionnaire

RFP Proposal References

PDF•past-performance

Cancelled or Terminated Contracts Form

PDF•other

Williamson County FEMA Addendum Revised October 2024

PDF•amendment

Similar Contracts List Form

PDF•similar-contracts

26RFP67 Mandatory Pre-Bid Meetings Schedule

DOCX•presolicitation

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyTexas → Wilco
Contacts1 person available
OfficeTX, USA
Organization / Agency
Texas → Wilco
View Agency Profile
Office AddressTX, USA
Contacts
Fernando Ramirez
contact@example.gov

Interested Companies (11)

Show more
Cy'Services & Landscape Solutions
Gov Alpha
Brooklyn, NY
Green World Care
dallas, TX

See All 11 Interested Companies

Start a free trial to view all interested companies, their contact details, and full contractor profiles.

Start Free Trial

Full Description

Show more
Williamson County is inviting interested parties to submit Proposals for Mowing / Landscape Maintenance Services. All Proposals shall be submitted in accordance with this RFP. The RFP contains detailed and specific information regarding Williamson County. For any contract exceeding $100,000.00 will be required to furnish a Bid bond in the amount of 5% of the total contract price.

Similar Contracts

Same NAICS industry code

NAICS: 561730
New
SLED
26-091 Landscape Cleanup and Bi-Weekly Maintenance for the TorranceThe California Department of Motor Vehicles is soliciting bids for a thirty-six-month contract to provide one-time landscape cleanup and biweekly maintenance services at the Torrance DMV Field Office, with an estimated cost of $37,531.00. Bidders must be certified as a Small Business by the State of California’s Office of Small Business and Disabled Veteran Enterprise Services and hold a valid C27 contractor license in good standing from the Contractors State License Board, with all subcontractors also required to possess active C27 licenses. The bidder must declare all intended subcontractors and their license numbers on official forms, and all licenses must remain valid throughout the contract term. In accordance with Executive Order N-6-22, bidders must certify they are not subject to U.S. or state economic sanctions against Russia or Russian entities, and any discovery of sanctioned status prior to contract execution will result in bid rejection. The solicitation is open starting July 22, 2026, with written questions due by July 27, 2026, at 10 a.m., and responses to those questions released by July 28, 2026, at 4:30 p.m. The final deadline for bid submission is July 30, 2026, at 10:00 a.m. The point of contact for inquiries is Feliciano Hernandez at the California DMV, reachable via email. All bids must be submitted through the CalEProcure portal, and compliance with all documentation and licensing requirements is mandatory for consideration. The contract performance location is the Torrance DMV Field Office in California.
California Department of Motor Vehicles

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561730
New
SLED
26RFP67 Mowing / Landscape Maintenance ServicesWilliamson County is seeking qualified vendors to provide mowing and landscape maintenance services through solicitation 26RFP67, with proposals due by August 25, 2026. The contract is open to all eligible parties and requires full compliance with the specifications outlined in the request for proposal, including performance standards and service expectations. For any award exceeding $100,000, bidders must submit a bid bond equal to five percent of the total proposed contract value to ensure financial responsibility and commitment. The work will be performed across various locations within Williamson County, Texas, primarily centered in Georgetown, and all proposals must be submitted via the official online portal accessible through the provided link. Primary contacts for questions and communications include Fernando Ramirez and Joy Simonton, with Kerstin Hancock available as a secondary point of contact for purchasing-related inquiries.
WILLIAMSON COUNTY

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 561730
New
SLED
RFP 26-004 Roadside Tree TrimmingThe City of Auburn, Georgia is soliciting proposals for roadside tree trimming services under RFP 26-004, with the solicitation number PE-66422-NONST-2027-000000011. The request was posted on July 22, 2026, and responses are due by August 20, 2026, at 8:00 PM Eastern Time. All interested parties must ensure they have the most current version of the RFP and any associated addenda, which are exclusively posted on the City of Auburn’s official website. The scope of work involves maintaining trees along roadways within the jurisdiction of Auburn, Georgia, and performance will be limited to locations within the state. Proposals must be submitted in accordance with the terms outlined in the solicitation, and any questions or clarifications will be addressed through official updates on the website. Sunshine Palmer serves as the primary point of contact for this solicitation and can be reached via email at spalmer@cityofauburn-ga.org or by phone at 770-963-4002. The procurement falls under the state, local, or educational (SLED) organization category and is not subject to any set-aside designation. Bidders are required to monitor the City’s website regularly for updates, as all correspondence, amendments, and responses to inquiries will be published there and not through direct notification. The official portal for viewing the solicitation and related materials is accessible through the Georgia Department of Administrative Services procurement system using the provided UI link.
City of Auburn

POSTED

about 19 hours ago

DEADLINE

in 28 days
View Details
NAICS: 561730
New
SLED
27-005-LH Roadside and Sidewalk Spraying Project (8/20/26)The Macon-Bibb County Board of Commissioners is soliciting sealed bids for Roadside and Sidewalk Spraying services, with submissions due by 12:00 noon on Thursday, August 20, 2026, at the Procurement Department located in City Hall, Macon, Georgia. Bids must be submitted in original form along with a Flash Drive and accompanied by a bid bond of at least five percent of the bid amount to be considered valid. All bids will be publicly opened on the same day at 2:00 p.m. in the Board of Commissioners Chamber. Interested parties are encouraged to review bid documents at the Procurement Department or online via the Georgia Procurement Registry and Macon-Bibb County’s official purchasing website. A non-mandatory pre-bid conference is scheduled for July 29, 2026, and all questions must be submitted by July 31, 2026, via email to the designated contact. The procurement actively promotes participation from Minority, Women-Owned, and Disadvantaged Business Enterprises and supports their inclusion as subcontractors, with assistance available through the Director of Small Business Affairs. The solicitation number is PE-61100-NONST-2027-000000132, and the project is administered by the Macon-Bibb County Board of Commissioners under Georgia state jurisdiction.
Macon Bibb County Board of Commissioners

POSTED

about 20 hours ago

DEADLINE

in 28 days
View Details
NAICS: 561730
New
DIBBS
Erosion Control and LandscapingThe contract pertains to the installation of erosion control measures, seeding, mulching, and final landscaping activities to be completed after construction efforts at the New Cumberland facility. Work is targeted to prevent soil degradation and promote vegetation establishment in alignment with environmental protection standards, requiring skilled implementation of site-specific erosion mitigation techniques and hardscape integration. The scope demands precision in timing and materials to ensure long-term land stability and aesthetic completion following primary construction phases. The contract is classified as a subcontract under NAICS code 561730, indicating it falls within the waste management and remediation services sector. It is issued by the Department of Defense through the DDSP New Cumberland Facility, with performance located at ZIP code 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, with all submissions required through the DIBBS platform using the reference number SPE8E826T4786. No set-aside provisions or specific organizational type requirements are indicated, meaning eligible subcontractors of any size may respond provided they meet the technical and regulatory conditions for the work.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561730
New
SLED
Landscaping and Final Site WorkThe contract titled Landscaping and Final Site Work encompasses a full range of site development activities including topsoil placement, seeding, sodding, planting of vegetation, installation of sidewalks and curbing, and final grading to ensure proper site completion and drainage. These tasks are critical for transforming the construction site into a finished, aesthetically and functionally compliant landscape environment. Work is to be performed at Fletcher St in Whitinsville, Massachusetts, with a zip code of 01588, under the oversight of the Massachusetts Department of Public Works. The contract is classified as a subcontract with a NAICS code of 561730, aligning with landscape services. It was posted on July 22, 2026, and requires responses by August 5, 2026, at 7 PM. The solicitation is managed through the CommBuys platform, and all work must meet the technical and quality standards expected by the agency, though specific performance metrics or compliance requirements are not detailed in the provided data. Bidders must be prepared to deliver comprehensive site finishing services in a timely and professionally executed manner.
DPW24 - Department of Public Works

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561730
New
Federal
Roadside Brushing and Vegetation ManagementThe contract titled Roadside Brushing and Vegetation Management involves the trimming and removal of overgrown vegetation along road edges and rights-of-way to ensure clear visibility, minimize fire risks, and prevent obstructions to traffic. This work is critical for maintaining safe and accessible transportation corridors, particularly in areas prone to wildland fires and dense vegetation growth. The scope requires consistent maintenance practices that align with environmental and safety standards to protect both public infrastructure and natural resources. This is a subcontract classified as a Total Small Business Set-Aside under SBA guidelines, exclusively available to small businesses as defined by the Small Business Administration. The North American Industry Classification System code is 561730, which corresponds to landscaping services. The contract was posted on July 22, 2026, with a response deadline of August 10, 2026, at 9:00 PM. The place of performance is specified as Hot Springs National Park, Arkansas, with the contracting agency being the USDA Forest Service under the Department of Agriculture. All work must be performed within this designated location, and the subcontractor is expected to comply with all federal, state, and local regulations governing vegetation management in protected federal areas.
Csa East 2 Usda-Fs

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 561730
New
Federal
Landscaping and Site RestorationThis contract awards a small business subcontract for landscaping and site restoration services around a monument sign at the Natick location with ZIP code 01760. The scope requires grading, installing sod and mulch, and performing final site beautification to ensure aesthetic and functional restoration. Erosion control measures must be implemented and all debris and materials must be cleaned up upon completion. The solicitation is set aside exclusively for small businesses under the SBA's Total Small Business Set-Aside designation, as defined by FAR 19.5, with the NAICS code 561730 corresponding to landscape services. The contract was posted on July 22, 2026, and all proposals must be submitted by August 7, 2026, at 8:00 PM ET. The awarding agency is the Department of Defense through its W6QK Acc-Apg Natick office, and performance is required solely at the designated Natick site.
W6QK Acc-Apg Natick

POSTED

1 day ago

DEADLINE

in 15 days
View Details
NAICS: 561730
New
Federal
Roadway Sanding and Traction TreatmentThe contract involves providing sand and de-icing agents to enhance traction on roadways during and after snow events, ensuring safe travel conditions. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, as defined by the SBA. The North American Industry Classification System code 561730 identifies the work under general environmental services, specifically related to snow and ice control operations. The opportunity was posted on July 22, 2026, with responses required by 6:00 PM ET on July 23, 2026. Performance is designated to occur in Barre, though the specific state and postal details are not provided. The contracting agency is the Department of Defense through its W2SD Endist New England office, indicating this work supports defense-related infrastructure maintenance in the region.
W2SD Endist New England

POSTED

1 day ago

DEADLINE

in about 4 hours
View Details
NAICS: 561730
New
Federal
Winter Snow and Ice Removal ServicesThe contract entails full-service snow plowing, ice removal, and de-icing operations at the Barre Falls Dam site during winter months to ensure safe and accessible roadways and entry points. Services must be performed promptly and effectively in response to winter weather conditions, with a focus on maintaining operational continuity and public safety at the facility. The work is being procured as a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses qualifying under SBA guidelines are eligible to bid, aligning with federal small business support policies. The North American Industry Classification System code 561730 confirms the scope involvesjanitorial and other support services with a focus on snow and ice control. The opportunity was posted on July 22, 2026, with a response deadline of July 23, 2026, indicating an extremely short window for submissions, requiring rapid preparation and submission from interested small business contractors. The contracting agency is listed as W2SD Endist New England under the Department of Defense, with the place of performance specified as Barre. Despite the lack of detailed contact information or location specifics beyond the city, the urgency of the deadline and the critical nature of the work underscore the importance of immediate readiness and capability to mobilize equipment and personnel at the dam site following snow or ice events.
W2SD Endist New England

POSTED

1 day ago

DEADLINE

in about 4 hours
View Details
NAICS: 561730
New
Federal
Erosion and Sediment Control InstallationThe contract requires the installation of silt socks and turbidity curtains along 570 linear feet to manage sediment runoff during earthwork activities and safeguard nearby water quality. The work is part of an erosion and sediment control effort intended to comply with environmental protections, focusing on preventing soil erosion and particulate discharge into waterways. The procurement is structured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 561730 indicating it falls under environmental waste management services. The solicitation was posted on July 22, 2026, with responses due by August 18, 2026, and the work is to be performed in Richwood. The contracting agency is the USDA Forest Service through its CSA East 13 division, operating under the Department of Agriculture, though no specific point of contact or detailed location information beyond the city is provided.
Csa East 13 Usda-Fs

POSTED

1 day ago

DEADLINE

in 26 days
View Details
NAICS: 561730
New
Federal
Snow Removal and Sanding Services, Barre Falls Dam, Hubbardston, Barre, and Oakham, MAThe U.S. Army Corps of Engineers - New England District is soliciting bids for snow removal and sanding services at the Barre Falls Dam Project Area encompassing Hubbardston, Barre, Rutland, and Oakham, Massachusetts. The contractor is responsible for providing all equipment, materials, labor, and transportation required to perform snow removal, roadway sanding, and walkway shoveling and sanding activities within the designated area. This procurement is exclusively set aside for small businesses under the SBA Total Small Business Set-Aside program, with the North American Industry Classification System code 561730 and a size standard of $9.5 million in annual revenue. All interested vendors must maintain an active registration in SAM.gov at the time of submission; failure to do so will result in non-responsiveness and automatic rejection. The solicitation was posted on July 22, 2026, with a strict response deadline of July 23, 2026, at 6:00 p.m. Eastern Time. The contracting office is located in Concord, Massachusetts, and inquiries should be directed to Alicia LaCrosse at the provided contact information. Services must be performed at the specified locations in Massachusetts, and proposals must comply fully with all solicitation requirements to be considered.
W2SD Endist New England

POSTED

1 day ago

DEADLINE

in about 4 hours
View Details

More opportunities from Texas → Wilco

Same awarding agency

NAICS: 238990
SLED
Construction MobilizationThe Construction Mobilization contract involves the full mobilization of personnel, equipment, and site preparation activities required to establish operational readiness for a construction project. This includes setting up temporary offices, installing signage, coordinating logistics, and ensuring all necessary resources are in place to support on-site operations. The work is classified under NAICS code 238990, indicating it falls under other special trade contractors, and is structured as a subcontract opportunity with no specific set-aside designation. The solicitation was posted on July 15, 2026, and responses are due by August 5, 2026, with no detailed location provided for the place of performance or the agency’s office address. The contract is managed by Wilco through its Texas organization, and interested parties must submit proposals via the provided web portal.
All Other Specialty Trade Contractors

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 324121
SLED
Asphalt Supply (Hot-Mix)Wilco is seeking subcontractors to supply hot-mix asphalt for paving operations, with all materials required to meet detailed project specifications. The opportunity is posted for bid on July 15, 2026, with responses due by August 5, 2026, and falls under NAICS code 324121, indicating it relates to petroleum and coal products manufacturing. The contract is classified as a subcontract and is being procured through Texas-based operations, though specific performance locations and contact details are not provided. Participants must ensure compliance with technical requirements for HMA supply without any set-aside provisions for small or disadvantaged businesses, and all bids must be submitted through the designated online platform.
Asphalt Paving Mixture and Block Manufacturing

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 561320
SLED
Traffic Control and Work Zone SafetyThe contract titled Traffic Control and Work Zone Safety requires the setup and maintenance of temporary traffic control zones to ensure safety during roadway operations. This includes providing all necessary equipment such as signage, barricades, arrow boards, and the deployment of certified flaggers who are trained and qualified to manage traffic flow in active work areas. The work is governed by industry safety standards and must comply with applicable regulations to protect workers and the traveling public. The contract is classified as a subcontract under NAICS code 561320, indicating it falls within the support activities for transportation sector. It was posted on July 15, 2026, with a response deadline of August 5, 2026, and is being managed by Wilco through its Texas organization. All services must be performed at locations designated by the agency, though specific geographic details are not provided in the posted data. Participation requires adherence to strict safety protocols and timely execution to support ongoing transportation infrastructure activities.
Temporary Help Services

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 238990
SLED
Pavement Striping and MarkingThe contract titled Pavement Striping and Marking is a subcontract issued by Wilco under Texas for the installation of reflective pavement markings using either thermoplastic or paint. The work scope includes applying lane lines, stop bars, symbols, and edge lines to ensure visibility and compliance with traffic safety standards. The solicitation was posted on July 15, 2026, with a response deadline set for August 5, 2026. The North American Industry Classification System code assigned is 238990, indicating it falls under other special trade contractors, specifically for pavement marking services. There is no set-aside designation or specific organizational type specified, and details such as the agency’s office address and place of performance are not provided. Interested parties must submit responses through the designated online portal prior to the deadline.
All Other Specialty Trade Contractors

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 238120
SLED
Asphalt Paving and OverlayThe contract involves the placement and compaction of a new hot-mix asphalt overlay at specified thicknesses, requiring thorough base preparation and proper joint sealing to ensure durability and performance. All work must comply with industry standards for asphalt paving, including surface preparation, material specification, and installation techniques to meet engineering requirements. The project is structured as a subcontract under the NAICS code 238120, indicating it falls within the paving and resurfacing of highways, streets, and roads. The solicitation was posted on July 15, 2026, with responses due by August 5, 2026, and the contracting entity is Wilco, operating in Texas, though specific location details for performance or contact are not provided. Interested parties must submit proposals through the designated online portal by the deadline to be considered.
Structural Steel and Precast Concrete Contractors

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 238990
SLED
Asphalt Milling and RemovalThe contract titled Asphalt Milling and Removal involves the full-depth removal of existing asphalt pavement using cold planers, with all reclaimed asphalt pavement (RAP) requiring haulage and proper disposal. This subcontract is issued by Wilco under the Texas state office, targeting infrastructure maintenance and road rehabilitation efforts. Work must be performed according to industry standards for pavement removal, ensuring complete extraction of the asphalt layer without damaging underlying structures. The scope includes not only milling operations but also the transportation and disposal of the generated RAP material in compliance with environmental and regulatory requirements. The opportunity was posted on July 15, 2026, with a response deadline of August 5, 2026, at 8:00 PM, providing interested parties with approximately three weeks to prepare and submit proposals. The NAICS code 238990 categorizes this as Other Specialty Trade Contractors, indicating the work falls under specialized construction services rather than general contracting. There is no set-aside designation specified, meaning all eligible contractors may bid regardless of business size or ownership characteristics. Performance location details are not provided, suggesting the work may occur at multiple sites across Texas under Wilco’s jurisdiction. Bidders must review the full solicitation on the provided link to understand specific technical, safety, and reporting expectations.
All Other Specialty Trade Contractors

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 541350
SLED
Quality Inspection and Testing ServicesThe contract seeks qualified vendors to provide independent quality inspection and testing services for concrete, compaction, and finished surfaces to verify compliance with project specifications. This includes both laboratory and on-site evaluations to ensure materials and workmanship meet required standards throughout the construction process. The scope is focused on technical verification and documentation to maintain integrity and regulatory alignment during execution. The opportunity is classified as a subcontract under NAICS code 541350 and is posted by Wilco in Texas with a response deadline of August 5, 2026. There is no stated set-aside designation, and the place of performance and point of contact details are not provided. Interested parties must submit proposals through the provided online portal by the specified deadline to be considered for award.
Building Inspection Services

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 237310
SLED
Site Preparation and Grading ServicesThe contract involves comprehensive site preparation for driveway installation, encompassing clearing, excavation, grading, and sub-base compaction, with mandatory erosion control measures and strict adherence to engineering standards. All work must be performed to ensure long-term stability, proper drainage, and compliance with applicable construction codes, reflecting a focus on both functionality and environmental responsibility. The scope is designed to prepare the ground properly prior to paving or surface application, requiring precise execution and quality control throughout each phase of earthwork. This is a subcontract opportunity posted by Wilco under the NAICS code 237310 for civil engineering construction, with a response deadline of August 5, 2026. The contract is open for bids through the BonfireHub platform, and while specific location details are not provided, performance will occur in Texas. There is no set-aside classification indicated, and the opportunity does not list a designated point of contact, meaning interested parties should refer to the official posting for submission guidelines, technical requirements, and additional instructions.
Highway, Street, and Bridge Construction

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 327320
SLED
Ready-Mix Concrete SupplyWilco is seeking a subcontractor to supply ready-mix concrete that meets specific project requirements for TYPE 2 driveways, with all deliveries targeting Georgetown, Texas. The concrete must comply with defined technical specifications to ensure durability and performance, and each batch must be accompanied by proper quality documentation and batch tickets verifying compliance. The solicitation was posted on July 15, 2026, with responses due by August 5, 2026. This opportunity falls under NAICS code 327320, which classifies it as a concrete product manufacturing activity, and while no set-aside designation is indicated, the contract structure is explicitly defined as a subcontract. All performance and delivery obligations are centered in Georgetown, Texas, and interested parties must submit proposals through the provided BonfireHub portal by the deadline.
Ready-Mix Concrete Manufacturing

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 238110
SLED
Concrete Driveway Installation (TYPE 2)The contract requires the complete installation of TYPE 2 concrete driveways, encompassing all aspects of the work from initial site preparation through final curing. This includes forming, pouring, finishing, and ensuring proper curing of the concrete, with the contractor responsible for providing all necessary labor, materials, and equipment to meet the specified standards. The scope is comprehensive, leaving no aspect of the installation to the client, ensuring full accountability and execution by the selected subcontractor. The opportunity is posted under NAICS code 238110 for paving, street and highway construction, and is classified as a subcontract under Wilco’s Texas operations. The solicitation was posted on July 15, 2026, with a firm response deadline of August 5, 2026, at 7:00 PM. Interested parties must submit proposals through the Wilco Bonfire Hub portal before the deadline, and all work must be performed in accordance with the technical and logistical requirements outlined in the contract without additional specifications being provided.
Poured Concrete Foundation and Structure Contractors

POSTED

8 days ago

DEADLINE

in 13 days
View Details
NAICS: 332312
SLED
Structural Steel FabricationThe contract titled Structural Steel Fabrication seeks a subcontractor to fabricate structural steel components such as beams, columns, and connections required for building or bridge construction projects. The opportunity was posted on July 15, 2026, with a firm response deadline of August 4, 2026, at 8:00 PM. It falls under NAICS code 332312, which specifically categorizes structural metal fabrication. The contracting entity is Wilco, with the operational location identified as Texas, though no specific city or address details are provided for the agency office or place of performance. The solicitation does not indicate any set-aside status or specialized procurement preferences, and no point of contact information is listed. Interested parties must submit responses through the designated online portal at the provided link before the deadline.
Fabricated Structural Metal Manufacturing

POSTED

8 days ago

DEADLINE

in 12 days
View Details
NAICS: 327320
SLED
Ready-Mix Concrete SupplyWilco is seeking a subcontractor to supply ready-mix concrete for a construction project, with all materials required to meet specified quality standards and delivery timelines. The contract falls under NAICS code 327320, which classifies it as a concrete product manufacturing opportunity, and is open for responses until August 4, 2026. The work is to be performed in Texas, though exact location details are not specified, and the subcontractor must ensure consistent production and timely delivery to support the project’s schedule without disruption. No set-aside provisions are applicable, and bidders should be prepared to fulfill contractual obligations related to volume, mix specifications, and adherence to industry norms for concrete placement and curing. The opportunity is posted on Wilco’s Bonfire Hub platform, and interested parties are expected to submit proposals by the stated deadline to be considered.
Ready-Mix Concrete Manufacturing

POSTED

8 days ago

DEADLINE

in 12 days
View Details