Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

28--BLADE,COMPRESSOR,AI

Active
SPRPA126QYC98Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for 16 newly manufactured compressor blades designated as NSN 0R-2840-017141020-B8 under emergency acquisition authority, with delivery terms FOB origin. The procurement is strictly limited to approved government sources due to the critical safety nature of the item, which is flight critical and requires engineering source approval to ensure continued performance and quality. Refurbished, remanufactured, or repaired components are expressly prohibited, and only suppliers previously vetted and approved by the Government may submit bids. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is subject to DFARS Clause 252.209-7010 for Critical Safety Items and DLAD Clause 46.292 for product verification testing at the source. The Government retains exclusive access to proprietary technical data, manufacturing knowledge, and design control capabilities essential to the part’s integrity, which are not commercially available and cannot be replicated without the approved source’s expertise. Non-approved sources must submit comprehensive documentation per the NAVSUP Weapon Systems Support Source Approval Brochures—either for spares or repair—detailing experience with identical or similar items, and failure to provide this information will render proposals ineligible. Proposals must be received by September 21, 2026, and submission does not guarantee competition, as this procurement operates under FAR 6.302-1 as a sole-source action due to urgency and technical limitations. The contracting office is the Department of Defense’s DLA Aviation at Philadelphia, with Brett Duffey as the primary point of contact.

General Info

Sole-source procurement for 16 new flight-critical compressor blades, FOB origin, approved sources only, no refurbished parts, due by September 21, 2026.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia
Contacts1 person available
OfficePHILADELPHIA, PA, 19111-5098, USA
Organization / Agency
Department Of Defense → Pa DLA Aviation At Philadelphia
View Agency Profile
Office AddressPHILADELPHIA, PA, 19111-5098, USA

Full Description

Show more
NSN 0R-2840-017141020-B8, REF NR 5140T15G02, QTY 16 EA, DELIVERY FOB ORIGIN. For Critical Safety Items (CSI), DFARS clause 252.209-7010, Identification of Critical Safety Items, is incorporated by reference. For items for which Government inspection and acceptance will be conducted at the source, DLAD clause 46.292, Product Verification Testing, is incorporated by reference. DLAD clauses can be viewed at http://www.dla.mil/Acquisition/Pages/DLAD.aspx. As applicable, DFARS clause 252.242-7005, Contractor Business Systems, is incorporated by reference. THIS SOLICITATION IS BEING ISSUED UNDER EMERGENCY ACQUISITION FLEXIBILITIES AUTHORITY; Synopsis is waived based on urgency (FAR 5.202(a)(2)). All potential offers shall provide newly manufactured spares only. Refurbished, remanufactured, or repaired material will not be acceptable; Offers for such are ineligible for award. Offerors are advised that offers received from sources which are not government-approved sources of supply will be deemed technically unacceptable, and therefore ineligible for award. Any distributors of approved source(s) MUST submit a copy of their authorized distributor letter, on the source's letterhead, to the buyer point of contact indicated on the solicitation via email, at time of proposal submittal. This part requires engineering source approval by the design control activity in order to maintain the quality of the part. Existing unique design capability, engineering skills, and manufacturing/repair knowledge by the qualified source(s) require acquisition/repair of the part from the approved source(s). The approved source(s) retain data rights,manufacturing/repair knowledge, or technical data that are not economically available to the Government, and the data or knowledge is essential to maintaining the quality of the part. An alternate source must qualify in accordance with the design control activity's procedures, as approved by the cognizant Government engineering activity. The qualification procedures must be approved by the Government engineering activity having jurisdiction over the part in the intended application. The subject item requires Government source approval prior to contract award, as the item is flight critical and/or the technical data available has not been determined adequate to support acquisition via full and open competition. Only the source(s) previously approved by the Government for this item have been solicited. The time required for approval of a new source is normally such that an award cannot be delayed pending approval of a new source. If you are not an approved source you must submit, together with your proposal, the information detailed in one of the NAVSUP Weapon Systems Support (NAVSUP WSS) Source Approval Information Brochures listed below. Spares: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Sup port/Business-Opps/ Repair: https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP -Weapon-Systems-Support/Business-Opps/ technical data required to be submitted based on your company's experience in production of the same or similar item, or if this is an item you have never made. If your request for source approval is currently being evaluated at NAVSUP WSS submit with your offer a copy of the cover letter which forwarded your request for source approval. Offers received which fail to provide all data required by the Source Approval Brochure or document previous submission of all data required by the Source Approval Brochure will not be considered for award under this solicitation. Please note, if evaluation of a source approval request submitted hereunder cannot be processed in time and/or approval requirements preclude the ability to obtain subject items in time to meet Government requirements, award of the subject requirement may continue based on Fleet support needs. The NAVSUP WSS Commercial Item Identification Brochure is now available at: "https://www.navsup.navy.mil/NAVSUP-Enterprise/NAVSUP-Weapon-Systems-Support/Bus iness-Opps/"The proposed contract action is for supplies or services for which theGovernment intends to solicit and negotiate with only one source under theauthority of FAR 6.302-1. All responsible sources may identify their interestand capability to respond to the requirement or submit proposals, quotationsor capability statements. This notice of intent is not a request forcompetitive proposals. However, all proposals received within 45 days (30days if award is issued under an existing Basic Ordering Agreement (BOA) afterdate of publication of this synopsis will be considered by the Government. Adetermination by the Government not to compete with this proposed contractbased upon responses to this notice is solely within the discretion of theGovernment. Information received will normally be considered solely for thepurpose of determining whether to conduct a competitive procurement.

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
RING, TURBINE STATOR
Solicitation # SPE4A1-26-Q-0112
The contract pertains to the procurement of 87 units of a turbine stator ring identified by NSN 2840-01-487-5388 and part number 5078T15G01 from General Electric Company, issued under solicitation SPE4A1-26-Q-0112 with a firm delivery deadline of 240 days after award. All items must comply with DLA’s packaging requirements labeled RP001 and be packed per MIL-STD-2073-1E using prescribed methods including preservation method 41, wrap material 00, and unit container E5, with marking strictly following MIL-STD-129 without special markings. Sampling for inspection must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification level VII with an AQL of 0.1. The item is designated as a critical application, and any configuration changes require an engineering change proposal. The contract enforces CMMC Level 2 self-assessment for cybersecurity compliance and mandates removal of government identification from non-accepted supplies. Delivery is FOB origin to DLA Distribution in San Diego, with inspection and acceptance occurring at destination. The unit of issue is each, with no tolerance for quantity variance, and transportation aligns with DLA procedural notes C19 and C20. The solicitation was posted on August 5, 2026, with responses due the following day, and the material is needed for delivery by March 14, 2026, under a federal procurement administered by the Department of Defense’s Aviation Supply Chain.
AVIATION SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

in about 21 hours
View Details
NAICS: 336412
New
DIBBS
PARTS KIT, PUMP OVER
Solicitation # SPE4A7-26-T-617Z
This contract specifies the procurement of a parts kit for pump overhaul with fuel control, identified by NSN 2915-00-939-9536 and part number 60-371B901A from Hydro-Aire Aerospace Corp. The requirement is for exactly ten units with no variance allowed, to be delivered FOB origin within 117 days, with a required ship date of December 9, 2026 and an original delivery deadline of September 23, 2027. All items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including specific mandates such as the inclusion of two retaining rings MS16627-1112 per kit, a correction to a recurring supplier error. Inspection and acceptance occur at origin using zero-based sampling per MIL-STD-1916 or ASQ H1331, with critical attributes requiring a 0.1 AQL. The supplier must also meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and adhere to standardized packaging per MIL-STD-129 and ASTM D3951, with palletization following DLA packaging guidelines. The technical data package is proprietary or insufficient for competitive procurement, classifying the item as critical with no approved specification, and all documentation must satisfy source approval requirements including SAR submission. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker Air Force Base, with transportation governed by DLAD procedural notes. The contract enforces strict labeling, identification, and marking compliance including removal of government identification from non-accepted supplies, and all measuring and test equipment must be calibrated and documented. The unit of issue is each, priced at $10.00 for a total value of $100.00, and the solicitation was issued under contract number SPE4A7-26-T-617Z with a response deadline in August 2026. The purchaser is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with Aaron Miles designated as the primary point of contact. The contract supersedes any conflicting standards, and all requirements, including those marked with R or I numbers, are binding and must be traced to the current DLA Master List revision effective on the solicitation issue date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
COVER, SUPPORT ASSEM
Solicitation # SPE8EF-26-Q-0168
The contract specifies the procurement of 25 units of a cover support assembly with dimensions of 9.60 inches in length and 7.20 inches in width, designed for use on the Model 4000 trailer, identified by NSN 1740-00-885-4698 and part number P/N 101719-77 or P/N 101719-79. The supplier must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with all items palletized accordingly and shipped in compliance with DLA procedures. The contract requires firm fixed pricing with zero variance in quantity, and delivery is due within 60 days after award, with FOB origin and inspection and acceptance occurring at destination. Covered defense information applies, and the contractor must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. All supplies must be marked and labeled to prevent government identification on non-accepted items, and shipments must be sent to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with transportation and freight details governed by DLAD procedural notes. The solicitation was issued under contract number SPE8EF-26-Q-0168 with a response deadline in August 2026 and a required delivery date of September 30, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 3 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
The U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking information on manufacturers capable of producing the sleeve bearing with NSN 3110-01-341-6408, previously sourced from KATO ENGINEERING INC. with part number 012-63499-54. This request is purely for market research and does not constitute a solicitation, proposal, or binding commitment from the government. Respondents are asked to identify any sources that can manufacture the item, including the manufacturer’s location by city and state or country, and to provide contact information if available. All submissions must be sent to Matthew Diefes at matthew.diefes@dla.mil or via phone at 804-718-8776, with responses due by August 12, 2026. Participation is entirely voluntary, and no contract award is guaranteed based on the information received. The solicitation is categorized as a sources-sought notice under NAICS code 336412, which pertains to aircraft engine and engine parts manufacturing, and carries no set-aside preferences. It is posted under solicitation number SPE4A6326Q1284 with a primary point of contact at DLA Aviation’s office in Richmond, Virginia, and a secondary contact available for follow-up. The place of performance is also listed in Richmond, Virginia. The notice explicitly states that responses are not offers and the government has no obligation to proceed with procurement as a result of the information gathered. Interested parties are encouraged to submit details by the deadline to assist in identifying potential suppliers for future procurement planning.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
Federal
GOVERNOR, PUMP, PRESS_End_Item_TF33_NSN_2915015571122RV_PN_5225-1181
Solicitation # FD20302700090
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of the Governor, Pump, Press with Part Number 5225-1181 and National Stock Number 2915-01-5571122RV, intended for use on the TF33 engine platform. This initiative, issued under Notice ID FD2030-27-00090, is not a solicitation or a commitment to award a contract, and no funds are currently available for this effort. The government is seeking information from potential suppliers capable of full-scale production, including component procurement, inspection, testing, preservation, packaging, and shipping, as well as management of long-lead items, diminishing manufacturing sources, and nonrecurring engineering costs necessary to qualify as an approved source. The estimated requirement is for 37 units, and the industry classification is NAICS 336412 with a size standard of 1,500 employees. All business sizes and categories—including Small Businesses, 8(a) firms, Service-Disabled Veteran-Owned Small Businesses, HUBZone businesses, and Women-Owned Small Businesses—are encouraged to respond. Responses must be submitted via the designated “Add Me to Interested Vendors” button by the deadline of August 6, 2026, 4:59 a.m. Central Standard Time. The point of contact for inquiries is the 421st SCMS Requirements Workflow email, and the place of performance is Tinker AFB, OK 73145. This market research aims to evaluate competition viability and determine if the requirement can be set aside for small business participation, but no contract will result from this notice alone.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in about 9 hours
View Details
NAICS: 336412
New
Federal
NSN 2915-01-313-4615, BYPASS INDICATOR, WSDC: 26F
Solicitation # SPE4A726R0755_SourceSought
The Department of Defense, through DLA Aviation, is conducting market research to identify qualified suppliers capable of manufacturing the bypass indicator identified by NSN 2915-01-313-4615 and part number TD221MF0DCY5. This effort is not a solicitation and no contract award will result from this request. The government seeks capability statements from organizations that can perform the full scope of new manufacture including component procurement, inspection, testing, packaging, shipping, supply chain management, and mitigation of material shortages. The NAICS code 336412 applies, and the requirement spans a five-year base period with no options. Currently, Pall Aeropower Corp is the approved source, and any other vendor must submit a Source Approval Request to be considered. Responses must include organizational details, capability documentation, and information on subcontracting or teaming arrangements, with no financial liability assumed by the government for submission costs. All submissions are due by August 10, 2026, and must be emailed to TATJANA.KLEMMER@DLA.MIL. The government will use responses to determine whether to set aside the eventual contract for small businesses or pursue full and open competition, potentially making multiple awards. The DLA does not hold complete technical data on the part, further emphasizing the importer for suppliers to demonstrate technical and operational competency. No telephone inquiries will be accepted, and no feedback or evaluations will be provided on submissions. Interested parties should note that the place of performance is undetermined and final unit pricing will be established at contract award time. Questions regarding this market research should be directed to TATJANA.VAUGHAN@DLA.MIL.
DLA Aviation

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
Frame, Access Hole _End_Item_B-2_NSN_1560014687510FW_PN_DAA3144A671-067
Solicitation # FD20302602419-SS
The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research under FAR Part 10 to identify potential sources for the new manufacture of a Frame, Access Hole with NSN 1560-01-468-7510FW and part number DAA3144A671-067, intended for use on the B-2 platform. This is not a solicitation or a commitment to award a contract; no funds are currently available, and no contractual obligation will result from responses. The effort aims to assess industry capability, determine if the requirement can be competed, and evaluate potential for a small business set-aside, with interest in all business sizes including small, small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned small businesses. Respondents must provide comprehensive business information, including CAGE code, UEI, size certification under NAICS code 336413, and ownership details, and must be prepared to meet rigorous qualification standards for sourcing and manufacturing. Potential sources must be capable of full new manufacture including component procurement, inspection, testing, packaging, and shipping, and may be required to assume nonrecurring engineering costs to become an approved supplier. Technical data is not provided by the government, and responders must independently acquire or demonstrate access to necessary engineering drawings and specifications through the designated Public Sales Desk. Compliance with Manufacturing Qualification Requirements (MQR), as referenced under MQR-PSD-1, is mandatory and includes submission of a Source Approval Request (SAR) package via DoD SAFE, accompanied by a certified Company Profile, SIP certifications for critical processes, Master Tooling certifications, and a signed Technical Data Rights Certification using Appendix E wording. Responses must include documentation of NADCAP, OEM, or DoD audit certifications where applicable and adhere to submission protocols strictly through designated email channels. All submissions are due by August 11, 2026, and must be submitted electronically with no oral responses permitted. The government will use this input solely for acquisition strategy development and planning purposes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
FUEL CONTROL MAIN_End_Item_J85_NSN_2915012575403OK_PN_6001T8G09A
Solicitation # FD20302700144
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify potential sources for the new manufacture of the Fuel Control Main component with part number 6001T8G09A and NSN 2915012575403OK, intended for use on the J85 platform. This effort is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award or funding is intended at this stage. The government seeks information from all types of businesses, including small businesses, service-disabled veteran-owned firms, women-owned businesses, 8(a) certified entities, and HUBZone participants, to assess competitive potential and determine if a small business set-aside is feasible. The requirement involves full new manufacture, including component procurement, inspection, testing, packaging, shipping, supply chain management, and addressing diminishing manufacturing sources and material shortages, with potential responsibility for nonrecurring engineering costs to qualify as an approved source. Manufacturing qualification requires submission of a Source Approval Request package through the DoD SAFE system, accompanied by technical data compliance, including adherence to the Manufacturing Qualification Requirements (MQR-PSD-1) referenced publicly on SAM.gov and any applicable Engineering Data List. Technical drawings, if referenced on the EDL, must be requested through the designated Tinker Engineering Public Sales Desk. Companies responding must provide detailed business information including CAGE code, UEI, NAICS classification, size status, ownership structure, and certifications to support market research objectives. Responses must be submitted by September 3, 2026, and all submissions must be in writing, with no oral responses accepted. The estimated spares requirement is anticipated to be fulfilled by December 27, 2027, though the exact solicitation schedule remains undetermined until market research concludes.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 28 days
View Details
NAICS: 336412
New
Federal
Roller Bearing_End_Item_J85_NSN_3110006185880OK_PN_327B430P1
Solicitation # FD20302700167
The U.S. Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, is conducting market research to identify qualified sources for the new manufacture of roller bearings with part number 327B430P1 and NSN 3110-00-618-5880, intended for use on the J85 platform. This is a Sources Sought synopsis under FAR Part 10, not a solicitation, and no contract award is anticipated based on responses. The government seeks information from all potential vendors, including small businesses, disadvantaged businesses, service-disabled veteran-owned firms, HUBZone businesses, and women-owned small businesses, to determine if the requirement can be competed or set aside for small businesses. The estimated need is for 177 units, and potential suppliers must demonstrate capability to handle full manufacturing, inspection, testing, packaging, logistics planning, supply chain management, and address diminishing manufacturing sources and material shortages, including any associated nonrecurring engineering costs. Responses are due by August 10, 2026, and must be submitted through the designated workflow email address. The North American Industry Classification System code is 336412, with a size standard of 1,500 employees, and the place of performance is Tinker AFB, Oklahoma. The Department of the Air Force, under the Air Force Sustainment Center, is leveraging this effort to evaluate the industrial base and refine its acquisition strategy for future sourcing. No funds are currently available for this market research phase, and submissions will be used solely to inform future procurement decisions. Participation requires selecting the “Add Me to Interested Vendors” button on the posting.
Ok DLA Aviation At Oklahoma City

POSTED

about 8 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC96
The contract solicitation is for 648 newly manufactured turbine rotor blades, NSN 0R-2840-016995266-B8, under emergency acquisition authorities with a waived synopsis due to urgency. All items must be newly manufactured with no acceptance of refurbished, remanufactured, or repaired components. Only government-approved sources are eligible for award, and any distributor must submit an authorized distributor letter on the approved source’s letterhead at time of proposal submission. The part is classified as flight critical and has an unstable design, with known performance issues and anticipated configurational changes that will render the current version obsolete. Due to these technical uncertainties and critical safety implications, Government source approval is mandatory prior to contract award, and only previously approved sources have been solicited. New sources must submit comprehensive documentation per NAVSUP WSS Source Approval Brochures for spares or repair, and failure to provide complete data will render an offer ineligible. The requirement is being handled under FAR 6.302-1 as a sole-source action due to limited competition eligibility. Proposals are due by September 21, 2026, and must be submitted to the designated point of contact; failure to meet source approval requirements may still allow award based on Fleet support needs if timely approval cannot be secured.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
28--BLADE,TURBINE ROTOR
Solicitation # SPRPA126QYC97
The contract solicitation pertains to the procurement of 586 newly manufactured turbine rotor blades, identified by NSN 0R-2840-017141155-B8 and reference number 5144T23P02, to be delivered FOB origin. This is a single-source acquisition under FAR 6.302-1 due to the item’s flight-critical nature and insufficient technical data to support full and open competition, with only previously government-approved sources being solicited. Refurbished, remanufactured, or repaired parts are strictly prohibited, and all offers must be for brand-new components. Offerors not currently approved sources must submit complete documentation per NAVSUP WSS Source Approval Brochures to demonstrate manufacturing capability, including technical data on similar items or proof of prior approval under review. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at time of proposal submission. The acquisition is being conducted under emergency flexibility authority, waiving the standard synopsis requirement due to urgency. Government inspection and acceptance will occur at the manufacturer’s facility under DLAD clause 46.292, and the contract incorporates DFARS clauses 252.209-7010 for Critical Safety Item identification and potentially 252.242-7005 regarding contractor business systems. The point of contact for all submissions is Brett N. Duffey of the Defense Logistics Agency Aviation in Philadelphia, with proposals due by September 21, 2026. Any proposals lacking the required source approval documentation or failing to confirm prior submission of such data will be deemed technically unacceptable and ineligible for award. While the solicitation allows any responsible source to respond within 45 days, the government reserves full discretion to proceed without competition based on fleet support needs and timelines, and responses will be evaluated solely to determine if competitive procurement is feasible. No award will be delayed if source approval cannot be finalized in time to meet operational demands.
Pa DLA Aviation At Philadelphia

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

NAICS: 333612
New
Federal
COUPLING,SHAFT,RIGI
Solicitation # SPRPA126QRC42
This solicitation for a rigid shaft coupling under SPRPA126QRC42 is issued under Emergency Acquisition Flexibilities and requires government-approved sources only; proposals from unauthorized distributors or non-approved suppliers will be rejected outright. All submitted items must be newly manufactured with no refurbished, remanufactured, or repaired materials permitted. The acquisition involves FMS customer-owned spares that are never owned by the U.S. Government or entered into the DoD supply chain, exempting them from Item Unique Identification and Valuation requirements per NAVSUP WSS N2 guidance, though Critical Safety Items are subject to identification under DFARS 252.209-7010. Delivery is governed by FMS-specific shipping instructions and transportation by sea, with warranty provisions requiring 12 months of coverage and 45 days after discovery for claims. Buy American and related certification requirements apply, and contractors must comply with security prohibitions, equal opportunity mandates for veterans and workers with disabilities, and mandatory use of Workflow Pro Assist Module. Invoicing follows a combined invoice and receiving report format, and all offers must include proof of authorized distributive status from the approved manufacturer on official letterhead. Government source approval is mandatory, and technical data or drawings are not provided. Compliance with integrity of unit prices, value engineering, and contractor business systems is incorporated by reference, with inspections conducted at the source under Product Verification Testing provisions.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVB77
This contract specifies requirements for the manufacture and delivery of shipping and storage containers under solicitation SPRPA126RVB77, with primary emphasis on rigorous quality control, material standards, and manufacturing procedures. The container must be fabricated from aluminum in strict accordance with Container Research Corporation drawing number 05259-612E001, latest revision, and all referenced specifications, including MIL-STD-130 for Unique Identification (UID) marking in data matrix format on a nameplate. The UID must be procured from NAVICP, and compliance with MIL-STD-2073 for packaging is required. Welding processes must adhere to MIL-W-22248 Class 4 for aluminum, with specific filler materials (4043 for 6061 alloy, 5356 or 5556 for 5000 series), and welders must be qualified under MIL-STD-1595A. Surface preparation demands chemical deoxidization with approved acid solutions no more than 10 days prior to welding (reduced to 3 days under outdoor exposure), followed by mechanical cleaning using approved methods only. All welds must be inspected visually with 5X magnification where necessary, and critical welds may require dye penetrant testing. Desiccant must be included per cubic foot of interior volume per MIL-D-3464 Type II, and cadmium plating is prohibited—replaced by zinc-nickel alloy finish per ASTM B841. The contract mandates a First Article Test (FAT), requiring the contractor to submit one unit within 120 calendar days to a designated government facility for dimensional, functional, leak, and drop testing. The FAT includes a 18-inch free fall test, pneumatic pressure leakage verification, form and fit evaluation, and compliance verification with drawing 612E001. The contractor bears all costs related to FAT submission, testing, repairs, and shipping, with government testing estimated at $12,000. Approved FAT units may be counted as production items only if undamaged and approved by the QAR. Suppliers must certify that production occurs in the same facility as the FAT unit. Waivers to FAT are available only to vendors with identical prior deliveries within three years, using the same processes and facilities, and must be accompanied by dual pricing. 100% production leak testing is required for every unit using Federal Test Method
Other Metal Container Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332911
New
Federal
28--VALVE,BLEED START
Solicitation # SPRPA126QYC95
The contract solicitation pertains to the procurement of 57 newly manufactured bleed start valves, identified by NSN 0R-2840-016666867-B8 and reference number 5146T31P01, with delivery terms set at FOB origin. This procurement is classified as an emergency acquisition under FAR 5.202(a)(2), which waives the synopsis requirement due to urgency, and is structured as a sole-source action under FAR 6.302-1. Only government-approved sources of supply are eligible for award; refurbished, remanufactured, or repaired items are unacceptable. Distributors must provide an authorized distributor letter on the approved source’s official letterhead at the time of proposal submission. The item is flight-critical and requires government source approval prior to award, as the technical data necessary for full and open competition is either inadequate or exclusively held by the approved source, and the qualification of a new supplier would delay delivery beyond operational needs. Offerors must comply with DFARS clauses 252.209-7010 for Critical Safety Item identification and 252.242-7005 for Contractor Business Systems, along with DLAD clause 46.292 for product verification testing at the source. To be considered, all offerors must submit complete documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, either detailing their experience producing identical or similar items or demonstrating capability if the item is new to their production line. Those with pending source approval requests at NAVSUP WSS must include a copy of their submission cover letter. Failure to provide all required information renders a proposal technically unacceptable and ineligible for award. The solicitation was posted on August 5, 2026, with a response deadline of September 21, 2026, and is managed by the Department of Defense, DLA Aviation office in Philadelphia. Proposals received within 45 days of posting may be evaluated, and the Government retains full discretion to determine whether competition is warranted. The point of contact for all submissions and inquiries is Brett N. Duffey, with email and phone details provided for direct communication.
Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334511
New
Federal
58--TRANSMITTER, RADAR,
Solicitation # SPRPA126RXA69
The contract involves the procurement of a single unit of a radar transmitter, identified by NSN 7R-5841-015873027-P8, under solicitation number SPRPA126RXA69, with delivery specified FOB origin. Issued by the Department of Defense through Pa DLA Aviation at Philadelphia, this acquisition is conducted under Emergency Acquisition Flexibilities, emphasizing the urgency and critical nature of the item. The contract strictly requires newly manufactured spare parts only, explicitly prohibiting refurbished, remanufactured, or repaired materials. This is a critical application item, necessitating that the source of the parts be approved by the design control activity to ensure quality, given the specialized engineering skills and manufacturing knowledge required. The approved source holds essential data rights and proprietary technical information, which are not economically transferable to the Government, maintaining the integrity and performance standards of the part. Any alternative suppliers must undergo a rigorous qualification process aligned with the design control activity’s procedures and must be approved by the cognizant Government engineering authority responsible for the part’s specific application. The response deadline for offers is March 30, 2026. The contract is managed from Philadelphia, PA, with Mary S. Lindsay as the primary point of contact for this solicitation. The emphasis on maintaining strict source approval and quality compliance highlights the critical role of this radar transmitter within defense operations and the necessity of adherence to established acquisition protocols under emergency provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336413
New
Federal
DEOL ASSY ATH SHORT
Solicitation # SPRPA126QZB41
This contract pertains to the procurement of a critical shipboard assembly, specifically the DEOL ASSY ATH SHORT, designated for use in aircraft launch and recovery systems where failure could result in loss of life, aircraft, or vital shipboard functions. The item is classified as critical material, mandating strict adherence to MIL-STD-130 for marking and compliance with drawing 3975AS1400, Revision A, along with all referenced specifications. Manufacturing and inspection must follow rigorous quality assurance protocols, including 100% inspection of critical characteristics under the direct surveillance of a DCMA Quality Assurance Representative. NDT methods such as magnetic particle and penetrant inspection are required, and all testing must be conducted by NADCAP-accredited or ISO 17025-certified laboratories. The contractor is solely responsible for providing all tooling, fixtures, and test equipment, and no government-furnished items are authorized. Compliance with Buy American and Fair Trade Agreements is required, and the contractor must submit associated certifications. The solicitation was issued under Emergency Acquisition Flexibilities and is subject to additional federal requirements including mandatory use of Workflow Pro, veteran and disability equal opportunity provisions, and security exclusions. Packaging must conform to MIL-STD-2073, and all deliverables are to be submitted by August 17, 2026, with performance located in Philadelphia, PA. The NAICS code is 336413 with a size standard of 1,250 employees.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332439
New
Federal
81--SHIPPING AND STORAG
Solicitation # SPRPA126RVC31
The contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.
Other Metal Container Manufacturing

POSTED

1 day ago

DEADLINE

in 29 days
View Details