Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

28--SEAL RING,LABYRINTH

Active

SPE4A726T599JFederal

Response Deadline08/05/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation seeks quotations for 233 units and one additional unit of NSN 2840003521989 SEAL RING, LABYRINTH, with delivery required to the DLA Distribution Depot in Oklahoma. The first quantity of 233 units must be delivered within 640 days after award, while the single unit is due within 180 days. All responsible sources are invited to submit electronic quotes by the deadline, which is August 5, 2026. The solicitation, identified by number SPE4A7726T599J, was posted on July 29, 2026, and falls under NAICS code 336412 for aircraft engine and engine parts manufacturing. The awarding agency is the Defense Logistics Agency Aviation, part of the Department of Defense, with the procurement office located in Richmond, Virginia. Questions must be directed via email to the designated point of contact, and full solicitation details are accessible through the SAM.gov workspace or DIBBS portal using the provided solicitation number.

General Info

233 labyrinth seal rings plus one unit due to DLA Oklahoma, deadlines 640 and 180 days, quote by August 5, 2026.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedJul 29

Combined Synopsis

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 12:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Show more

Proposed procurement for NSN 2840003521989 SEAL RING,LABYRINTH: Line 0001 Qty 233 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0640 DAYS ADO Line 0002 Qty 1 UI EA Deliver To: DLA DISTRIBUTION DEPOT OKLAHOMA By: 0180 DAYS ADO All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

28--ARM,ACTUATING VANEThe U.S. Department of Defense, through DLA Aviation, is soliciting quotes for 5,060 units of NSN 2840001995235, ARM, ACTUATING VANE, with deliveries split between 5,059 units to be delivered within 547 days and one unit within 180 days, both to DLA Distribution Cherry Point. The solicitation is open to all responsible sources, and submissions must be made electronically by the deadline of August 6, 2026. The contract falls under NAICS code 336412, indicating procurement within the aircraft engine and engine parts manufacturing sector. The primary point of contact for inquiries is via email, with direction to consult the full solicitation document found on DIBBS under solicitation number SPE4A7A26T599K. The office managing this procurement is located in Richmond, Virginia, and no set-aside preferences are specified, meaning the opportunity is open to all qualified vendors.

POSTED

about 4 hours ago

DEADLINE

DIAPHRAGM, SPECIALThe contract pertains to the procurement of 47 units of a special diaphragm assembly, bonded, with NSN 2915-01-292-1600, under solicitation SPE4A7-26-T-599D. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and distribution is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by DLA to access controlled technical data. The item requires adherence to CMMC Level 2 cybersecurity standards as certified by a C3PAO and enforces specific physical identification and bare item marking requirements. Documentation for source approval must be provided per RC001. Delivery is due within 164 days of award, with performance slated for Tracy, California, 95304-5000. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Huy Nguyen as the primary point of contact.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

NOZZLE, STARTER FUELThe contract is for the procurement of 67 units of a starter fuel nozzle, identified by NSN 2910-00-919-2022 and part numbers 915914C1 from RTX Corporation and 970-2 from COLLINS ENGINE NOZZLES, INC, intended for use on CH-47 Chinook helicopters. This is a critical application item sourced under a total small business set-aside, with a unit price of $67.00 per unit, resulting in a total price of $4,489.00. Delivery is required within 167 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at destination. All packaging must comply with ASTM D3951 and MIL-STD-129, strictly adhering to DLA’s Master List of Technical and Quality Requirements, which override any other standards. Palletization must follow DLA’s RP001 packaging guidelines, and the item is subject to configuration change management and variance control procedures. The solicitation number is SPE7LX-26-U-8795, issued by the Department of Defense’s Strategic Acquisition Program Directorate, with responses due by July 31, 2026, and the point of contact is Theodore Misiolek.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 23 hours ago

DEADLINE

SEAL RING, LABYRINTHThis solicitation, SPE4A7-26-T-599J, seeks a labyrinth seal ring with NSN 2840-00-352-1989 in a quantity of 233 units for delivery within 640 days after award, with a response deadline of August 5, 2026. The contractor must conduct first article testing on three units of this item and submit a formal test report within 180 calendar days of contract award, providing written notice at least 14 days prior to shipment for government verification. The contracting officer will issue written approval, conditional approval, or disapproval of the test results within 30 days of receipt. The offeror must ensure that no covered telecommunications equipment or services are provided under this contract as mandated by FAR 52.204-24 and DFARS 252.204-7016. Domestic source compliance is strictly enforced under the Berry Amendment and Buy American Act, with a reduced threshold of $150,000; any use of non-domestic materials requires explicit disclosure. Small business joint ventures must submit all applicable certifications for eligibility under the stated categories. Quoters are strongly encouraged to provide quantity ranges in submissions to facilitate efficient procurement decisions, except for Auto IDC, and must submit a “No Bid” notification on DIBBS if unable to quote by the deadline to avoid misunderstandings. All contractors must register through DLA’s Account Management & Provisioning System to access the Vendor Shipment Module and must not use additive manufacturing for this item unless formally approved in advance. Additionally, the vendor must disclose current dealer or distributor certifications and confirm they are not utilizing Fast Pay provisions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Supply of Main Wheel Assemblies (NSN 1630-01-158-5752)The contract solicits the supply of ten brand-new, airworthy Main Wheel Assemblies identified by NSN 1630-01-158-5752, requiring full original equipment manufacturer traceability and a Certificate of Conformance in compliance with FAR 52.246-15. All units must be certified as airworthy and delivered with complete documentation to ensure compliance with federal aviation standards. The solicitation is issued under a subcontract type with a NAICS code of 336412, indicating focus on aerospace component manufacturing. The offering is managed by the Aviation Logistics Center under the Department of Homeland Security and is open for responses until August 18, 2026, with submissions due by 6:00 PM Eastern Time. There is no set-aside designation, and performance location details are unspecified. The opportunity was posted on July 28, 2026, and interested parties must access the complete solicitation through the provided SAM.gov link.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

Supply of Tail Wheel Assemblies (NSN 1630-01-161-8343)The contract calls for the supply of 16 brand-new, airworthy Tail Wheel Assemblies identified by NSN 1630-01-161-8343, each requiring full original equipment manufacturer traceability and a Certificate of Conformance compliant with FAR 52.246-15. All units must meet stringent airworthiness standards and be delivered with documentation verifying authenticity and quality assurance. The solicitation is structured as a subcontract under NAICS code 336412, with the Aviation Logistics Center operating under the Department of Homeland Security as the issuing organization. Responses are due by August 18, 2026, at 18:00 UTC, following a posting date of July 28, 2026. The place of performance and point of contact details are not specified, and no set-aside type is designated, indicating open competition among qualified suppliers.

Aviation Logistics Center (ALC)(00038)

POSTED

DEADLINE

F100 - Control Exhaust Nozzle, NSN 2995014502816NZ, P/N 4083931This contract is a spares buy for the F100 Control Exhaust Nozzle with National Stock Number 2995014502816NZ and Part Number 4083931, aimed at procuring essential replacement components for military aerospace systems. The solicitation, identified by number FA812126R0018, was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 PM Eastern Time. There is no set-aside designation applied, meaning the opportunity is open to all qualified contractors without restriction based on business size or other categories. The NAICS code 336412 categorizes this procurement under Aerospace Product and Parts Manufacturing, aligning with the technical nature of the component. The contracting office is located at Tinker Air Force Base in Oklahoma, under the Department of Defense, specifically the FA8121 AFSC PZAAA organization. Primary point of contact for inquiries is Treva Billinger, reachable via email at TREVA.BILLINGER@US.AF.MIL or phone at 405-734-0260. Performance of the contract is expected to be fulfilled at an unspecified location, and all bids must be submitted through the provided SAM.gov portal.

FA8121 Afsc Pzaaa

POSTED

DEADLINE

NSN: 2915-012187655, Rod & Piston, ACTU ; Part Number 2665806:; Qty 266; WSDC 06FThe contract pertains to the procurement of 266 Rod & Piston, ACTU units with NSN 2915-012187655 and part number 2665806, classified as a Critical Safety item requiring a higher-level quality system. Delivery is mandated 167 days after receipt of order to a designated location, with FOB at origin and inspection and acceptance occurring at the destination. The solicitation is issued under an unrestricted solicitation using other than full and open competition and is anticipated to be awarded against the OEM’s Basic Ordering Agreement, with the RFP scheduled for release on or about August 12, 2026, and responses due by September 12, 2026. Offers exceeding $900,000 require a subcontracting plan, while those over $10,000,000 must include certified cost and pricing data in addition to a subcontracting plan. All offerors must be registered in the System for Award Management (SAM) to be eligible for award. Alternate offerors must submit a Source Approval Request package along with a completed solicitation copy to be considered; failure to submit sufficient documentation in time will result in exclusion from this procurement, though approval may qualify them for future opportunities. Award decisions will be based on price, past performance, and other factors assessed through the Supplier Performance Risk System. The procuring activity is DLA Aviation, with primary point of contact Jason Balsiger, and performance will occur in Richmond, Virginia.

POSTED

DEADLINE

FD2030-26-02434The contract pertains to the procurement of a CONE, EXHAUST AIRCRA with NSN 2840-01-347-7857OJ, governed by top drawing 23052623 and subject to EDL revision 6 dated 24 FEB 2026, with MDC code RTS indicating its logistics and maintenance classification. The item is associated with Nguyen, Nguyen N as the IM name, suggesting responsibility for inventory management or technical oversight. The contract, identified by title and solicitation number FD2030-26-02434, was posted on July 28, 2026, with a response deadline of July 28, 2027, and is classified as a special notice under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The issuing organization is DLA Aviation Oklahoma City under the Department of Defense, operating as a sub command, with no specific place of performance or point of contact provided. The procurement is not designated for any specific set-aside program and is accessible via the SAM.gov portal.

DLA Aviation Oklahoma City

POSTED

DEADLINE

28--NOZZLE SEGMENT,TURBThe contract pertains to the procurement of a nozzle segment for a turbine, under solicitation number SPRPA126QYC82, issued by the Department of Defense through the Defense Logistics Agency Aviation in Philadelphia. It mandates strict compliance with federal acquisition regulations including mandatory use of Workflow Pro’s Assist Module, adherence to Buy American Act requirements, and fulfillment of security prohibitions and exclusions effective February 2026. Equal opportunity provisions for workers with disabilities and annual representations and certifications are required, alongside royalty information and priority rating notices for national defense and energy programs. Payment instructions follow the Wide Area Workflow system with combined invoice and receiving report formats, and item identification and valuation must be conducted per JAN 2023 guidelines. The offer response deadline is August 27, 2026, and the primary point of contact is Shawn Frank, reachable via email and telephone at the provided Philadelphia address. The North American Industry Classification System code is 336412, indicating the product falls under turbine and turbine generator set manufacturing.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

KC46 Engine Exhaust CoversThe solicitation W50S8A26QA031 for KC46 Engine Exhaust and Inlet Cover Sets is a 100 percent small business set-aside under NAICS code 336412, with a size standard of 1,500 employees, and is issued as a Request for Quote under FAR Subpart 12.6. The government seeks 24 sets of covers for the PW 4062-94 engine, designed to withstand extreme environmental conditions including jet blast, freezing temperatures, sand, dust, and UV exposure while being breathable, waterproof, hydrophobic, freeze-proof, washable, lightweight, inherently anti-static, and free of vapor corrosion inhibitors. Each set must be zipper-less and button-less to prevent FOD, with the inlet cover featuring a reinforced access hole for a heater hose and the ability to securely attach the exhaust cover via hooks or clips. Installation must be possible without ladders or stands, and dimensions are strictly defined for both inlet and exhaust openings as well as engine length. All quotes must be submitted in English and U.S. currency, remain valid for 60 days, and comply with the FOB Destination requirement to 302 Newmarket St, Newington, NH 03801. The solicitation, originally closing on July 30, 2026, has been amended to extend the deadline to August 14, 2026, due to pending RFI responses. Only entities with an active SAM registration, including a Unique Entity Identifier and CAGE code, are eligible, and firms must confirm their small business status. The award will be made to the most advantageous offer based on technical acceptability—a pass/fail gate requiring full response to all line items and demonstration of compliance with all salient characteristics—combined with price. Technical and contractual inquiries must be submitted in writing by 12:00 noon EST on July 21, 2026, to designated points of contact. Contract administration requires use of the Wide Area WorkFlow system for electronic invoicing and receiving reports, with accelerated payments to small business subcontractors mandated. Deviations from standard FAR clauses are cited, including Alternate II of 52.225-3 for Buy American provisions, and security, labor, and procurement restrictions related to Maduro regime involvement and Xinjiang Uyghur Autonomous Region are incorporated. All submissions must adhere to the provisions and clauses outlined in

W7NN Uspfo Activity Nhang 157

POSTED

DEADLINE

TRANSDUCER, POSITION / NSN 2915-01-464-1233 / B-1B AIRCRAFTDLA Aviation is conducting market research to identify qualified sources capable of manufacturing the position transducer with NSN 2915-01-464-1233, a component used on the B-1B aircraft, currently sourced from Kavilco Corp. under part number GM6027-2. The requirement calls for new manufacture of the item, including procurement of components, inspection, testing, packaging, shipping, and comprehensive supply chain management to address issues like diminishing manufacturing sources and long-lead parts. The North American Industry Classification System code is 336412, and the estimated requirement spans a five-year base period. No solicitation is active at this time; responses are voluntary and do not obligate the government to award a contract or reimburse any costs incurred. Interested parties must submit detailed capability statements, including organizational information, technical capacity, project management structures, and plans for managing subcontracting or teaming arrangements, along with supporting documentation to demonstrate ability to meet performance-based service acquisition criteria. All submissions must be sent via email to CHRISTOPHER.ROSE@DLA.MIL by August 3, 2026, and must address the lack of available technical data from DLA Aviation, implying that any non-approved source must initiate a Source Approval Request through the assigned engineering services agent. The government will use responses to determine whether the requirement will be set aside for small businesses or opened to full and open competition, with the possibility of multiple awards. No feedback will be provided on submissions, and telephone inquiries will not be acknowledged. The primary point of contact is Christopher Rose, with Jeremy Prince listed as a secondary contact, and all correspondence must be directed through the provided email address.

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

31--BEARING,SLEEVEThe U.S. Department of Defense, through the Defense Logistics Agency Aviation, is seeking bids for 175 sleeve bearings under NSN 3120006758491 through a Small Business Set Aside solicitation designated as SPE4A626T10DB. This procurement is exclusively reserved for small businesses, as defined by the Small Business Administration, and all qualifying responsible sources are invited to submit electronic quotes by the deadline of August 5, 2026. The contract requires delivery to the DLA Distribution Depot in Oklahoma, with a performance window of 165 days after award. The solicitation is accessible only online via the SAM.gov portal, and no hard copies are available; interested parties must retrieve all technical documentation, including digital drawings and military specifications, electronically. The primary point of contact for inquiries is DibbsBSM@dla.mil, with additional guidance directing vendors to the official DIBBS portal using the solicitation number for full details. The applicable NAICS code is 332991, indicating the focus on other fabricated metal product manufacturing.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

31--BEARING,SLEEVEThe solicitation seeks quotes for 3 sleeve bearings identified by NSN 3120010637020, with delivery required to W1A8 DLA DISTRIBUTION within 164 days after award. The approved source for this item is 17454 with part number 785E665-009, and no alternative sources or technical documentation such as specifications, plans, or drawings are available. This is a Small Business Set Aside under NAICS code 332991, meaning only small business concerns are eligible to compete. The procurement is conducted as a combined solicitation via an RFQ posted electronically on SAM.gov, with no hard copies available. All responsible small business sources may submit quotes, but submissions must be made electronically and received by the deadline of August 5, 2026. The contracting activity is managed by the DLA Aviation office in Richmond, Virginia, under the Department of Defense, with inquiries directed to the designated buyer email provided in the solicitation’s Additional Information section.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

15--PARTS KIT,FASTENERThe contract solicitation seeks proposals for a Parts Kit, Fastener with NSN 1560016993342, requiring a quantity of 20 units delivered to the DLA Distribution Depot in Oklahoma within 250 days after award. This is a Small Business Set Aside under NAICS code 336413, exclusively open to qualified small businesses, with all responsible sources invited to submit electronic quotes. The solicitation, identified by number SPE4A726Q0923, is available exclusively online through the SAM.gov platform, with no hard copies provided; digital drawings, military specifications, and standards can be accessed or ordered electronically. Responses must be submitted by the deadline of August 11, 2026, and inquiries should be directed via email to the designated buyer contact listed in the solicitation document, accessible through the provided SAM.gov link or DIBBS portal. The issuing office is DLA Aviation under the Department of Defense, located in Richmond, Virginia.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

66--SENSOR,AMBIENT TEMPThe solicitation targets the procurement of 4 ambient temperature sensors under NSN 6685015348253, with delivery required within 84 days of award. This request is structured as an RFQ under a Small Business Set Aside, aiming to award an Automated Indefinite Delivery Contract with a one-year term or until cumulative order values reach $350,000, whichever comes first. The guaranteed minimum order is one unit, and the estimated annual order volume is one, with shipments directed to multiple DLA depots across CONUS and OCONUS via consolidated containerization points. Approved sources for this item are limited to L35166P01 (07482) and 1122601 (60678), and only electronic quotes are accepted. No physical copies of the solicitation or technical specifications are available; all submissions must be made electronically through the official portal prior to the August 12, 2026 deadline. The contract is managed by the Department of Defense’s DLA Aviation office in Richmond, Virginia, with inquiries directed to the designated buyer email provided in the official documentation.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 4 hours ago

DEADLINE

53--BOLT,MACHINEThe contract solicitation seeks quotations for 169 machine bolts with NSN 5306010965593, with quantities divided into three lines: 167 units to be delivered to DLA Distribution Cherry Point within 559 days after award, and two additional units with delivery timelines of 60 and 379 days respectively. All responsible sources are invited to submit electronic quotes, which must be received by the deadline of August 6, 2026. The solicitation is designated as a Historically Underutilized Business Zone set-aside, specifically targeting businesses certified under the HUBZone program, and is classified under NAICS code 332722 for machine shops and turned product manufacturing. The contract is managed by the Department of Defense through DLA Aviation, with the purchasing office located in Richmond, Virginia. Prospective vendors are directed to direct all inquiries via email to the designated buyer and to reference the full solicitation document through the SAM. gov portal using the solicitation number SPE4A66T10GA.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

31--BEARING,ROLLER,CYLIThe contract solicitation seeks quotes for 31 bearing rollers, cylindrical, NSN 3110010099824, with a total of 31 units required—30 units to be delivered to the DLA Distribution Depot in Oklahoma within 557 days after award, and one additional unit to be delivered within 240 days after award. All responsible sources are invited to submit electronic quotes, which will be considered if received by the deadline. The solicitation number is SPE4A66T10GG, published on July 29, 2026, with responses due by August 6, 2026. The North American Industry Classification System code is 332991, indicating it falls under other fabricated metal product manufacturing. The procurement is managed by the DLA Aviation office under the Department of Defense, with the contracting office located in Richmond, Virginia. All questions regarding the solicitation must be directed via email to the designated point of contact, and further details can be accessed through the SAM.gov link provided or by searching the solicitation number on the DIBBS website.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

31--BEARING,WASHER,THRUThe procurement pertains to NSN 3120000717923, a bearing washer, with a requirement for four units to be delivered to W1A8 DLA Dist San Joaquin within 179 days after contract award. The approved source for this item is identified as 63857 with part number 679E0017C041A. The solicitation, numbered SPE4A626Q1230, is issued as an RFQ under a combined type with no set-aside designation and is open to all responsible sources who may submit timely quotes electronically. No hard copies of the solicitation or associated technical documents such as specifications, plans, or drawings are available. The solicitation was posted on July 29, 2026, with a response deadline of August 6, 2026. The contracting activity is managed by DLA Aviation under the Department of Defense, with the office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, and the full solicitation document can be accessed through the SAM.gov portal using the provided link or by searching the solicitation number on the DIBBS website.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

58--PARTS KIT,ELECTRONIThe contract seeks the procurement of 162 units of a parts kit for electronic systems identified by NSN 5895015878342, with delivery required to DLA Distribution Red River within 95 days of award. The only approved source for this item is supplier 28980 with part number 4866112-104-1. This procurement is conducted through a request for quotation, and hard copies of the solicitation are not available; all documentation must be accessed electronically via the provided link. Responsible suppliers are invited to submit quotes that will be considered if received before the deadline, and all submissions must be made electronically. The solicitation number is SPE4A5526T312T, posted on July 29, 2026, with responses due by August 6, 2026, and the NAICS code is 334220 for electronic component manufacturing. The contracting office is the DLA Aviation under the Department of Defense, located in Richmond, Virginia, and all questions must be directed via email to the designated point of contact listed in the solicitation document.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

15--PANEL,STRUCTURAL,AIThe solicitation seeks quotes for two units of NSN 1560011964405, a structural panel designated as AI, to be delivered to DLA Distribution Warner Robins with delivery deadlines of 440 and 151 days after award, respectively. This is a combined solicitation open to all responsible sources, and responses must be submitted electronically prior to the deadline of August 5, 2026. The procurement is managed by the Department of Defense through DLA Aviation, with the contracting office located in Richmond, Virginia. The North American Industry Classification System code is 336413, indicating this relates to aircraft manufacturing. The primary point of contact for questions is listed via email, with instructions directing potential offerors to the Additional Information link or the DIBBS website using the solicitation number SPE4A726Q0920 for full details.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

31--BEARING,SLEEVEThe solicitation seeks quotations for 109 sleeve bearings with NSN 3120013867700, to be delivered to DLA Distribution location W1A8 within 96 days after award. The procurement is conducted as a Request for Quote under solicitation number SPE4A626T10DQ, with a posted date of July 29, 2026, and a firm response deadline of August 5, 2026. All responsible suppliers may submit electronic quotes; hard copies are not accepted, and no specifications, plans, or drawings are provided. The contract is classified under NAICS code 332991 and is managed by the Defense Logistics Agency Aviation within the Department of Defense, based in Richmond, Virginia. The point of contact for inquiries is via email to DibbsBSM@dla.mil, with additional information accessible through the SAM.gov portal using the provided solicitation number. The place of performance and item specifications are not further defined in the notice, and the procurement is open without set-aside restrictions.

Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

16--DUCT ASSEMBLY,AIR CONDThe contract solicitation seeks bids for four duct assembly air conditioning units under NSN 1660011384412, with delivery required to the DLA Distribution Depot in Oklahoma within 300 days of award. This is a Small Business Set Aside procurement with a total set-aside designation under NAICS code 336411, restricting eligibility to qualified small businesses. The solicitation number is SPE4A726Q0921, publicly posted on July 29, 2026, with a response deadline of August 10, 2026. All bids must be submitted electronically through the SAM.gov platform, and no hard copies of the solicitation are available. Digitized technical drawings and military specifications can be accessed or ordered online. The procurement is managed by the Department of Defense through DLA Aviation, with the contracting office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, and bidders are instructed to review the full solicitation document through the SAM.gov workspace link or DIBBS system using the provided solicitation number.

Aircraft Manufacturing

POSTED

about 4 hours ago

DEADLINE