Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

29--CONTROL ASSEMBLY,PUSH-

Active
SPE4A726T628YFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the procurement of seven units of the CONTROL ASSEMBLY, PUSH-, identified by NSN 2995011258911, to be delivered to DLA Distribution Jacksonville within 424 days after award. Only approved sources identified by the codes 0PXV4, 3CW15, 76301, and 78710, each associated with part number 7-43429-16, are eligible to respond. The solicitation is issued as an RFQ and must be accessed electronically via the provided SAM.gov link; no hard copies are available, and no specifications, plans, or drawings are provided to potential offerors. All responsible sources may submit quotes, provided they are received electronically and prior to the deadline. The solicitation number is SPE4A726T628Y, posted on August 6, 2026, with responses due by August 14, 2026. The action falls under NAICS code 336412 and is managed by the DLA Aviation office in Richmond, Virginia, under the Department of Defense. Any inquiries must be directed via email to the designated point of contact, with instructions provided to locate the full solicitation document through the DIBBS website if needed.

General Info

Procure seven push control assemblies via RFQ to DLA Jacksonville by August 14, 2026, from approved sources only.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

VA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Aviation
Contacts1 person available
OfficeRICHMOND, VA, 23237, USA
Organization / Agency
Department Of Defense → DLA Aviation
View Agency Profile
Office AddressRICHMOND, VA, 23237, USA
Contacts
contact@example.gov

Full Description

Show more
Proposed procurement for NSN 2995011258911 CONTROL ASSEMBLY,PUSH-: Line 0001 Qty 7 UI EA Deliver To: DLA DISTRIBUTION JACKSONVILLE By: 0424 DAYS ADO Approved sources are 0PXV4 7-43429-16; 3CW15 7-43429-16; 76301 7-43429-16; 78710 7-43429-16. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
Federal
New Manufacture of Control Gyroscope (P/N 478710-04-02, NSN 6615-01-244-4251)The contract entails the full-scale manufacturing of 39 precision control gyroscopes designated as part number 478710-04-02 with NSN 6615-01-244-4251, specifically for use in aerospace systems. The scope encompasses all phases of production including engineering design, fabrication, rigorous quality assurance testing, and final delivery of flight-certified components that meet stringent military and aerospace specifications. The work must be executed to ensure full compliance with reliability and performance standards required for critical flight applications, with every unit warrantied and documented for traceability and certification. This is a subcontract opportunity issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with the North American Industry Classification System code 336412 indicating classification under Aircraft and Parts Manufacturing. The solicitation was posted on August 6, 2026, and all responses must be submitted no later than August 14, 2026, at 4:59 a.m. Eastern Time. The place of performance is not specified, but the components are intended for integration into defense aerospace platforms, requiring strict adherence to federal defense procurement protocols and secure handling procedures throughout the supply chain.
Ok DLA Aviation At Oklahoma City

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
Gearbox Assembly Manufacturing and SupplyThe contract calls for the manufacture and supply of 30 units of a gearbox assembly identified by Part Number C7088-1A and NSN 1680-00-789-9345HS, specifically for use in defense aerospace systems. The work encompasses full production, rigorous quality assurance processes, and timely delivery to Tinker Air Force Base in Oklahoma City. All units must meet stringent defense specifications to ensure operational reliability and safety in mission-critical applications. Quality control protocols are integral to the scope, with inspections and documentation required at every stage of fabrication to verify compliance with technical and performance standards. The contract is classified as a subcontract under NAICS code 336412, which pertains to aerospace product and parts manufacturing, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on August 6, 2026, with a response deadline of August 14, 2026, at 4:59 AM UTC. Interested parties must submit proposals within this window, and performance is expected to be executed in alignment with defense logistics and delivery timelines. There is no set-aside designation specified, meaning the opportunity is open to eligible small businesses and large contractors alike, provided they can meet the technical, quality, and delivery requirements for this critical defense component.
Ok DLA Aviation At Oklahoma City

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
Supply of Centrifugal Pump Units for U.S. Air Force Spares ProcurementThe U.S. Air Force is seeking to procure 19 units of a specific centrifugal pump identified by part number 8602M1 and NSN 4320-01-374-0685FW for potential future spares requirements. This procurement is structured as a subcontract and requires all vendors to undergo and successfully complete the Source Approval Request process to qualify as approved suppliers. The solicitation was posted on August 6, 2026, with a deadline for responses set for August 14, 2026, at 4:59 a.m. Eastern Time. The acquisition falls under NAICS code 336412, which corresponds to aircraft engine and engine parts manufacturing. The contracting activity is managed by the Defense Logistics Agency Aviation at Oklahoma City under the Department of Defense. While the place of performance and point of contact details are not specified, the procurement is intended to support long-term logistical needs of the Air Force, with the units designated for future spares rather than immediate deployment.
Ok DLA Aviation At Oklahoma City

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
Precision Agricultural Drone System IntegrationThe contract entails the full integration and delivery of a turnkey agricultural drone system designed for precision farming, featuring dual payload capability to support simultaneous deployment of multiple sensors or dispensers, real-time telemetry for live data transmission during flight, and advanced obstacle avoidance technology to ensure safe navigation over complex terrain. The system includes comprehensive ground control software that enables intuitive mission planning, real-time monitoring, and data analytics tailored for agricultural applications, ensuring seamless operation for users in field-based environments. All components must be fully functional, ruggedized for outdoor use, and compatible with existing farm management workflows. This procurement is a small business set-aside subcontract under NAICS code 336412, restricted to eligible small businesses, and is issued by the USDA Agricultural Research Service’s Agricultural Management and Precision Delivery unit. The place of performance is designated as Temple, Texas, with a response deadline of August 21, 2026. The system must meet rigorous performance standards to support reliable, high-accuracy data collection and targeted application in crop monitoring, soil analysis, and pest or nutrient management. All deliverables are expected to be fully integrated, tested, and ready for immediate field deployment without requiring additional customization or third-party integration.
USDA Ars Afm Apd

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
Federal
BEARING,SLEEVE,LINE
Solicitation # SPE4A626Q1284
Solicitation SPE4A626Q1284 is a sources-sought notice issued by DLA Aviation under the Department of Defense to identify qualified suppliers for a sleeve bearing, NSN 3110-01-341-6408, with approved source KATO ENGINEERING INC. (CAGE 32770). The notice invites surplus dealers, small business dealers, and distributors with existing stock or newly manufactured inventory to respond, requiring submission of a completed Surplus Certificate DLAD 52.211-9000 or adequate traceability documentation to verify product acceptability, along with available quantities and pricing. The acquisition will follow FAR 12 procedures for commercial items and FAR 13.5 for other than full and open competition, with no set-aside designated. Responses are due by August 12, 2026, and must be emailed to Matthew Diefes at matthew.diefes@dla.mil. The requested delivery is 11 units with a 255-day delivery window ARO, FOB Origin, with inspection and acceptance occurring at destination, and the item is subject to export control of technical data. The place of performance is Richmond, Virginia, and the contracting office is located at 23237. While the notice identifies the approved manufacturer and specifies the commercial nature of the item, it includes no pricing data, contract value, evaluation factors, or formal contract clauses, as it is preparatory in nature and not a binding solicitation. No packaging, marking, barcoding, or MIL-STD requirements are specified, and no representations, certifications, or socioeconomic claims from offerors are solicited or required beyond traceability and surplus documentation. The solicitation will proceed under terms consistent with standard DLA Aviation procurement practices, with award potentially based on price, past performance, and other factors outlined in the final solicitation document available via DIBBS.
DLA Aviation

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 336412
New
Federal
29--PLUNGER,ACTUATOR,SWITC
Solicitation # SPE7M426T305A
The U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 31 units of NSN 2995001059401, PLUNGER, ACTUATOR, SWITCH, to be delivered to DLA Distribution Cherry Point within 168 days of award. The procurement is issued as a Request for Quote under solicitation number SPE7M426T305A, with responses due by August 17, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. The approved source for this item is manufacturer 62983 with part number 333664. The North American Industry Classification System code is 336412, indicating the product falls under the Automotive Parts and Accessories Manufacturing category. All responsible suppliers may submit quotes, provided they are submitted electronically prior to the deadline. The solicitation includes no specifications, plans, or drawings, and inquiries must be directed via email to the designated point of contact listed in the solicitation document, accessible through the SAM.gov link provided. The contracting office is located in Columbus, Ohio, and the procurement is not set aside for any specific small business category.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
29--SPOOL AND SLEEVE
Solicitation # SPE7M426T324K
The contract solicitation under number SPE7M426T324K seeks quotations for 24 units of NSN 2995009157849, a SPOOL AND SLEEVE, to be delivered to DLA DISTRIBUTION CHERRY POINT within 447 days of award. The only approved source for this item is 603432 under manufacturer code 62983. This is a combined solicitation requiring electronic submission of quotes only, with no hard copies available, and no technical specifications, plans, or drawings are provided. All responsible suppliers are invited to respond, provided their quotes are received by the deadline of August 17, 2026. The solicitation was posted on August 6, 2026, and is managed by the DLA Land and Maritime office located in Columbus, Ohio. Questions must be directed via email to the designated point of contact, and further details can be accessed through the SAM.gov link or the DIBBS website using the solicitation number.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
29--DETECTOR,METALLIC P
Solicitation # SPE7M426T311W
The contract seeks the procurement of 10 units of NSN 2995013545754, DETECTOR,METALLIC P, to be delivered to W1A8 DLA DIST SAN JOAQUIN within 168 days after award. The only approved source for this item is vendor 97484 with code 4J2743. The solicitation is issued as an RFQ under number SPE7M421W and is accessible exclusively online via the SAM.gov workspace link; no hard copies are available, nor are any specifications, plans, or drawings provided. All responsible sources may submit quotes electronically, provided they are received by the deadline of August 17, 2026. The NAICS code is 336412, and the contracting activity falls under the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. Questions regarding the solicitation must be directed to the designated point of contact via email, and further details can be obtained by searching the solicitation number on the DIBBS website.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
49--BODY,NOZZLE,FUEL AND O
Solicitation # SPE7M426T311U
The contract solicitation seeks 43 units of NSN 4930012448043 BODY, NOZZLE, FUEL AND O, to be delivered to DLA DIST SAN JOAQUIN under the address code W1A8, with a delivery deadline of 168 days after award. The solicitation, numbered SPE7M426T311U, is issued as an RFQ and must be submitted electronically; no hard copies are available. Only approved sources—0DT23 47375 and 0DT23 61429AHL ITEM 9—are eligible to respond, though all responsible sources may submit quotes if received on time. No technical specifications, plans, or drawings are provided with this solicitation. The opportunity is listed under NAICS code 336412 and is managed by the DLA Land and Maritime office under the Department of Defense, with the primary point of contact for inquiries accessible via email at DibbsBSM@dla.mil. The solicitation was posted on August 6, 2026, and quotes must be submitted by August 17, 2026, through the SAM.gov portal using the provided UI link.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
29--HOUSING,ENGINE DRIVE,E
Solicitation # SPE7M426T320U
The contract solicitation seeks six units of NSN 2925013572512, HOUSING, ENGINE DRIVE, E, to be delivered to DLA Distribution Cherry Point within 168 days after award. The approved source for this item is DS-938071 under vendor code 62983. This procurement is conducted via a Request for Quotation, accessible exclusively through an online link, with no hard copies available. No specifications, plans, or drawings are provided to offerers. All responsible suppliers may submit electronic quotes before the deadline, and timely submissions will be considered for award. The solicitation number is SPE7M426T320U, posted on August 6, 2026, with responses due by August 17, 2026. The contracting activity falls under the Department of Defense through DLA Land and Maritime, with the office located in Columbus, Ohio. For inquiries, contact the designated buyer via email, as detailed in the solicitation’s Additional Information section, or search using the solicitation number on the DIBBS portal.
DLA Land And Maritime

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
SPEED MAC - STRATEGIC PROCUREMENT FOR ENGINE EXCELLENCE AND DELIVERY SPEED MULTIPLE AWARD IDIQ.
Solicitation # FA812126RB002
The U.S. Air Force is soliciting proposals under RFP FA812126RB002 for a Strategic Procurement initiative focused on Engine Excellence and Delivery Speed, aiming to establish Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contracts to support the repair, overhaul, remanufacture, and new manufacture of parts for the F100-PW-220/229 Pratt and Whitney engine. This effort serves both the U.S. Air Force and Foreign Military Sales, with contracted capabilities supplementing the Oklahoma City Air Logistics Complex’s operations at Tinker Air Force Base. Proposals must be submitted via the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module by 17 August 2026 at 12:00 PM Central Time, with no extensions granted despite prior erroneous dates. A virtual proposal conference is scheduled for 23 July 2026, providing participants an opportunity to engage with the contracting team. The contracts will be awarded under the Revolutionary FAR Overhaul (RFO) Part 15, accommodating both Firm-Fixed-Price and Cost-Reimbursable line items, with no restrictions on foreign participation. The ordering period spans ten years, consisting of a base five-year period and one five-year option, with individual task and delivery orders issued under RFO 16.506 and 16.507. Funding will be obligated per order, and all awardees must meet a minimum order guarantee established after the award conference. While initially scoped for the F100 engine, the contract structure allows for future expansion to other platforms such as the TF33. Commercial and non-commercial, supply and service, and sole source or competitive terms will apply as appropriate, and all documentation must be accessed through the PIEE platform.
FA8121 Afsc Pzaaa

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336412
New
Federal
TRANSDUCER, POSITION / NSN 2915-01-464-1233 / B-1B AIRCRAFT
Solicitation # SPE4A726R0733
The government plans to award an Indefinite Quantity Contract for the supply of DUCT, BLEED AIR, identified by NSN 1560-00-422-1789, under a sole-source or limited-source procurement authorized under FAR 6.302. The contract will have a five-year base period with an Estimated Annual Quantity of 40 units, delivered FOB Destination with inspection and acceptance also at destination. The item is classified as critical but not a Critical Safety Item and is subject to Export Control regulations. Only two approved sources currently exist: Lockheed Martin as the original equipment manufacturer with part number 4P94763-102A and Arrowhead Products with part number 12989-102A. No other sources are approved, and any new contractor must submit a Source Approval Request package to be considered. The Defense Logistics Agency Aviation does not hold complete technical data for this component, which limits competition. The solicitation will not use commercial item acquisition policies, though interested parties may indicate within 15 days if they can offer a commercial item meeting requirements. All contractors must be registered in SAM.gov to be eligible for award, and selection will consider price, past performance, and other factors outlined in the solicitation. The anticipated issue date is August 24, 2026, with responses due by September 25, 2026. The full solicitation will be accessible exclusively via DIBBS in PDF format, and no paper copies will be provided. The contracting office is located in Richmond, Virginia, with primary contact Christopher Rose.
DLA Aviation

POSTED

1 day ago

DEADLINE

in about 2 months
View Details

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NAICS: 339991
New
Federal
53--GASKET
Solicitation # SPE4A526Q0676
The contract is a Small Business Set Aside solicitation for 50 gaskets with NSN 5330013784252, to be delivered to USS WAYNE E MEYER DDG 108 within 123 days of award. The approved source for this item is designated as 03538 1210B3238-1, and only responsible suppliers may submit quotes, which must be received electronically by the deadline. The solicitation, identified by number SPE4A5026Q0676, was posted on August 7, 2026, with responses due by August 11, 2026. No physical copies or technical documentation such as specifications, plans, or drawings are available; all information must be obtained through the provided online portal. The procurement is managed by the Defense Logistics Agency Aviation under the Department of Defense, with the contracting office located in Richmond, Virginia. All inquiries must be directed via email to the designated point of contact, as no other communication channels are authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
Federal
CANOPY, FIXED
Solicitation # SPE4A7-26-R-0743
The Defense Logistics Agency Aviation is conducting market research under Sources Sought Notice 26R0743 to identify capable vendors for the new manufacture of four CANOPY, FIXED units identified by NSN 1560-01-654-1325 and part number M102-10X1000-11. This is not a formal solicitation, and no contract award is being sought at this time; instead, the government is gathering information to assess industry capacity, technical capability, and willingness to perform under a potential performance-based service acquisition contract. Respondents are expected to demonstrate their ability to manage the full lifecycle of production including procurement of component parts, inspection, testing, preservation, packaging, and shipping, while also showing capacity for supply chain management, logistics planning, forecasting, and addressing diminishing manufacturing sources. Key evaluation criteria for market responses include scope and scale alignment, application of financial and technical resources, project management effectiveness with emphasis on schedule compliance, cost containment, performance tracking, personnel retention, and risk mitigation. The government is considering whether to set aside the eventual procurement for small businesses or pursue full and open competition, with the possibility of multiple awards, based on the responses received. All submissions must be sent via email to Michelle R Scott by August 11, 2026, and must include organizational details, ownership size and type, and tailored capability statements that validate technical and operational readiness. No drawings, technical orders, or qualification requirements are available, and no formal pricing, delivery schedule, or contract clauses have been established. Participation is voluntary, with no reimbursement for costs incurred in responding.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336413
New
Federal
1560-000086303 FLOOR,AIRCRAFT WSDC Galaxy C-5 11F
Solicitation # SPE4A726R0749
The U.S. Department of Defense, through DLA Aviation, is seeking small business proposals for the procurement of three aircraft floor units identified by NSN 1560-000086303 under a firm fixed price, definite quantity contract set aside entirely for small businesses. The procurement falls under NAICS code 336413 and requires delivery within 585 days after receipt of order, with FOB destination terms and inspection and acceptance occurring at the origin. First Article Testing is mandated for this item, and while it is not classified as a Critical Safety Item, export control regulations apply. All offers must be submitted via fax to the designated number and must include a completed copy of the solicitation to be considered. The solicitation was issued around September 4, 2026, and is accessible exclusively through the DLA Internet Bid Board System in PDF format, requiring Adobe Acrobat Reader for viewing. Paper copies are not available. Past performance will be evaluated using the PPIRS system, and the final award decision may consider price, past performance, and other factors outlined in the solicitation. The Government has opted out of using commercial item acquisition policies under Part 12 but invites interested parties to indicate if they can supply a commercial item that meets the requirement within 15 days of the notice. The point of contact for inquiries is Rahsaan Deloney, with secondary support from Christopher Mayberry.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 23 days
View Details
NAICS: 336415
New
Federal
NSN: 1440-017021074; P/N: 497HN0112-3; RAIL,LAUNCHER,GUIDE
Solicitation # 7014547524
The U.S. Department of Defense, through DLA Aviation, is seeking information from potential suppliers regarding the manufacturing capability for the Rail, Launcher, Guide with National Stock Number 1440-017021074 and part number 497HN0112-3, classified under NAICS code 336415. This sources sought notice is purely informational and does not constitute a solicitation, offer, or binding commitment from the government; no funds are available for response preparation, and submissions are entirely voluntary. Companies wishing to be considered as potential suppliers must submit a Source Approval Request (SAR) package through the DoD SAFE file transmission site, as mailing CDs is no longer accepted. The item is currently sourced from five approved vendors, and any new supplier must demonstrate compliance with DoD 5220.22M standards for handling restricted technical data by completing DD Form 2345. Before submitting a SAR, responders are directed to review the DLA Supplier Requirements Visibility Application and PUB LOG FLIS to verify the item’s usage across military services and forecasted demand, as SARs may be rejected if deemed not cost-effective. The SAR submission process requires an initial email request to dlaavnsmallbus@dla.mil to obtain a secure upload link, and responses must include the company’s CAGE code, the NSN, and the recipient email address. The review process can exceed 180 days, and approval is communicated via formal notification only. All submissions must be completed by August 6, 2026, and inquiries should be directed to Nyjel Knowlin at DLA Aviation.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334290
New
Federal
CONTROL, TRANSMITTER
Solicitation # SPE4A7-26-R-0750
The solicitation SPE4A7-26-R-0750 seeks 62 units of a CONTROL, TRANSMITTER (NSN 5855-01-222-6240, P/N CSA-947280) under a presolicitation notice issued by DLA Aviation in Richmond, VA, with a formal solicitation issue date of August 31, 2026, and a response deadline of August 28, 2026. The procurement is being conducted as other than full and open competition and may involve a reverse auction through the ProcureX system, requiring offerors to self-register and familiarize themselves with the platform. Delivery is required FOB Destination, I/A Origin, with a 268-day window after receipt of order, and the item will be procured from an approved supplier, Teledyne Defense Electronics. The contracting office will evaluate proposals based on a combination of price, past performance, and other undisclosed factors, with no specified award methodology such as LPTA or best value trade-off. No detailed technical specifications, quality standards, packaging requirements, or accounting codes are included in the presolicitation materials, though contractors must be capable of performing inspection, testing, preservation, and packaging consistent with military logistics expectations. All solicitation documents are available only in PDF format via the DIBBS website, and submissions must be electronic; no paper copies are provided or accepted. A primary point of contact for questions is Michelle R. Scott, with a secondary contact available for coordination. While the solicitation indicates potential small business set-aside and requests size status and ownership information, no specific socioeconomic set-asides are confirmed, and no offeror certifications, representations, or detailed evaluation weights have been released. Final contract terms, including pricing, delivery location, inspection criteria, and administrative data, will be defined in the full solicitation and award documents.
Other Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 21 days
View Details
NAICS: 336413
New
Federal
NRP, ROLLER SWAGING / NSN 1680-01-619-9211 / CV-22 AIRCRAFT
Solicitation # SPE4A726R0763
DLA Aviation is conducting market research to identify qualified sources capable of manufacturing the NRP, ROLLER SWAGING item with NSN 1680-01-619-9211, originally sourced from REXNORD INDUSTRIES (CAGE 77896), part number RST3000, for use on CV-22 aircraft. This effort seeks information on potential vendors who can handle full-scale new manufacture including component procurement, inspection, testing, preservation, packaging, shipping, and supply chain management, particularly addressing challenges like diminishing manufacturing sources and long-lead parts. The requirement spans a five-year base period with no existing approved sources, and any new vendor must submit a Source Approval Request to become eligible. The North American Industry Classification System code is 336413, and the government has no complete technical data on this part, making vendor capability and technical expertise critical. Responses must include organizational details, tailored capability statements, documentation of personnel and technical resources, and explanations of any subcontracting or teaming arrangements. Submission is voluntary, non-binding, and does not guarantee future solicitation or compensation for costs incurred. The government will use responses to determine whether to set aside the contract for small businesses or proceed with full and open competition, potentially awarding multiple contracts. All submissions are due by August 13, 2026, and must be emailed to CHRISTOPHER.ROSE@DLA.MIL. No telephone inquiries will be accepted, and no feedback will be provided on submissions.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333310
New
Federal
HEADSET ASSEMBLY
Solicitation # SPE4A726R0761
This contract is for a Headset Assembly under an Indefinite Quantity Contract with a five-year base period, exclusively set aside for small businesses as defined by the Small Business Administration. The solicitation, issued on August 24, 2026, closes on September 25, 2026, and requires written offers submitted through the DLA Internet Bid Board Systems; no paper copies are available. The estimated annual demand is 1,261 units, with delivery orders ranging from a minimum of 828 to a maximum of 1,261 units per order. FOB destination terms apply, and inspection and acceptance occur at origin. Suppliers must be actively registered in the System for Award Management with annual updates required, and must meet all export control requirements due to the item being classified as a critical application with higher-level controls. Contractor Factory Acceptance Testing is mandatory, with a FAT schedule of 269 days and AFAA at 449 days. Price, past performance, and delivery will be equally weighted in evaluation, with final award decisions based on a combination of these and other solicitation-specified factors. Certified Cost and Pricing Data may be required, and progress payments are not authorized. The Supplier Performance Risk System will be applied, and the item is not considered critical for safety but is vital for mission-critical operations. Four qualified suppliers are listed with the same part number, and the contracting office is located in Richmond, Virginia under the Department of Defense’s DLA Aviation. The point of contact is Montana Kipp, and all submissions must comply with the solicitation posted on the official DIBBS portal. Failure to meet SAM registration requirements or miss submission deadlines will disqualify offers.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 17 days
View Details
NAICS: 336413
New
Federal
NSN 1620-01-170-7969; ROD ASSEMBLY,NOSE; WSDC: EEN; AIRCRAFT, HAWKEYE E-2C
Solicitation # SPE4A26R0248
The contract is for the procurement of 37 units of the Rod Assembly, Nose, identified by NSN 1620-01-170-7969, specifically for the E-2C Hawkeye aircraft, under a Firm Fixed Price arrangement with delivery terms FOB at Origin and inspection and acceptance at destination. The sole approved source is NORTHROP GRUMMAN SYSTEMS CORPORATION with CAGE code 70974, and the required part number is 123L40021-601. The contract will be awarded based on a composite evaluation of price, past performance, and additional factors outlined in the solicitation, with no set-aside provisions applied. The solicitation, numbered SPE4A26R0248, was posted on August 7, 2026, and responses are due by September 7, 2026, at 7:00 PM Eastern Time. Documentation is exclusively available through the DLA Internet Bid Board System, requiring a PDF reader for access, and no paper copies will be distributed. The contracting office is the Department of Defense’s DLA Aviation, located in Richmond, Virginia, with contact information provided for both primary and secondary points of contact. The place of performance is also in Richmond, Virginia, and the NAICS code associated with the work is 336413 for Aircraft Engine and Engine Parts Manufacturing.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 541490
New
Federal
Technical Data Package (TDP) Development and SubmissionThe contract involves the development and submission of a complete technical data package in accordance with DLA-WS-VIBB 26-20-1001, encompassing all required manuals, schematics, and maintenance documentation necessary for full technical compliance. The work must be compiled and formatted to meet stringent military standards, ensuring accurate, organized, and submission-ready deliverables that support operational readiness and logistics support for defense systems. This is a subcontract opportunity under the NAICS code 541490, directed by DLA Aviation under the Department of Defense, with performance required at Cherry Point, North Carolina, 28533. The solicitation was posted on August 6, 2026, and responses are due by September 21, 2026, with no set-aside designation specified.
Other Specialized Design Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 611430
New
Federal
Operator Training Program DeliveryThe contract outlines the delivery of an on-site training program for Department of Defense Defense Logistics Agency Aviation personnel focused on the safe operation, routine maintenance, and troubleshooting of high-precision jig grinders. The training is to be conducted at Cherry Point, North Carolina, with a specific emphasis on ensuring personnel achieve proficiency in handling precision machining equipment critical to defense manufacturing and repair operations. The program is classified as a subcontract under NAICS code 611430, indicating it falls under professional and management development training services, and is intended to enhance workforce competence through hands-on, location-specific instruction. The solicitation was posted on August 6, 2026, with a response deadline set for September 21, 2026, allowing potential vendors sufficient time to prepare and submit proposals detailing their methodology, instructor qualifications, training curriculum, equipment requirements, and safety protocols. While the contract does not specify a set-aside designation, it requires execution at the designated government facility where the equipment is in use, ensuring relevance and practical application. Training outcomes must meet operational readiness standards, and all instruction must align with federally mandated safety and technical guidelines for precision machinery use within defense logistics environments.
Professional and Management Development Training

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 541330
New
Federal
Post-Installation Testing and CalibrationThe contract requires comprehensive performance testing, calibration, and verification of jig grinder accuracy following installation, with specific focus on alignment checks and validation of dimensional tolerances to ensure operational precision. This work is critical to maintaining the high standards required for aerospace and defense manufacturing applications, where even minor deviations can impact component integrity and system performance. All testing procedures must adhere to established industry and military specifications to guarantee the equipment meets functional requirements under actual operating conditions. The subcontract is issued under NAICS code 541330 for engineering services and is managed by the Defense Logistics Agency Aviation, a division of the Department of Defense. Performance must occur at Cherry Point, North Carolina, with a response deadline of September 21, 2026. The contract does not specify a solicitation number or set-aside status, and no point of contact information is provided. Bidders are expected to demonstrate technical expertise in precision machinery calibration and proven experience with similar defense-related equipment testing protocols.
Engineering Services

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 238990
New
Federal
Installation, Rigging, and Unloading ServicesThe contract calls for the on-site delivery, unloading, rigging, and precision installation of two jig grinders at the DLA Aviation facility in Cherry Point, North Carolina, with a zip code of 28533. Services include comprehensive alignment, leveling, and seamless integration of the equipment to meet stringent operational standards, ensuring the machines are fully functional within the facility’s existing infrastructure. All work must be performed according to technical specifications governing industrial machinery installation, with an emphasis on accuracy and safety throughout the process. The contract is classified as a subcontract under NAICS code 238990, with a response deadline of September 21, 2026, and was posted on August 6, 2026. The performance location is at the Department of Defense's DLA Aviation site, and all activities must be completed in compliance with federal contracting requirements applicable to defense-related installations. The scope requires specialized expertise in heavy machinery handling and precision equipment setup, with no set-aside restrictions indicated. The contract does not include point of contact details, and further information is accessible through the provided SAM.gov link.
All Other Specialty Trade Contractors

POSTED

1 day ago

DEADLINE

in about 1 month
View Details