29 -- Loop Clamp

OC-ALC/LPKBA DIR CONTRACTING/PROPULSION 3001 STAFF DR STE 1AC1/112A TINKER AIR FORCE BASE OK 73145-303229'LOOP CLAMP SOL FA8104-06-Q-0067 DUE 25 JAN 2006 OC-ALC/PKXDA TINKER AFB OK 73145-3015, For additional information contact Stephen Yates/448 PSG/PKA +1 (555) 000-0000 Item 0001 NSN 5340-01-328-7739NZ, P/N: ST1540-08. Size: Overall width 0.5 in nominal, material thickness 0.031 in nominal, center to center distance between loop and mounting hole 0.5 in min and 0.56 in max, distance from loop center to tongue end 0.723 in min and 0.783 in max, loop inside diameter 0.188 in nominal, tongue hole type - round unthreaded, diameter 0.209 in nominal. Form/Fit/Function: used throughout the F100 series engine. Predominant Material-Clamp AMS5510, Cushion - PWA36450 ( rubber silicone) Applicableto:F100PW100/200/220/220E Engine. Destn: Tinker Air Force Base Ok 73145-3032. FIRST ARTICLE REQUIREMENT for non-approved sources or those that have not delivered within 3 years. This is a source- controlled item. Only sources listed are qualified. Sources must be qualified prior to being considered for award. The solicitation will contain instructions for obtaining further information on this requirement. The requirements of FAR 9.202(A) have been completed and copies of the qualification requirements and standards may be obtained from the Small Business Office IAW FAR 52.209-1. These qualification requirements apply to line item(s) 0001 . A firm fixed price type contract will be solicited. Quantity: 57,157 each. Delivery: 31 May 2006. The approximate issue date will be 27 DEC 2005. Written procedure will be used for this solicitation. To: Birken Mfg Co, Bloomfield Ct 06002-1397, Umpco Inc, Garden Grove CA 92846-5158 and T A Mfg Co, Valencia CA 91355-4117. No telephone requests. Only written or faxed requests received directly from the requestor is acceptable. All responsible sources solicited may submit a bid, proposal, or quotation, which shall be considered. Award will be made only if the offeror, the product/service, or the manufacturer meets qualification requirements at the time of award in accordance with FAR clause 52.209-1. Award will not be held in abeyance pending qualification of other sources. Potential sources are not to utilize intellectual property of third parties without appropriate authorization of the intellectual property owner. Potential sources are cautioned that no part of the Government qualification requirement is intended to endorse or encourage the improper use of intellectual property developed by the Original Equipment Manufacturer of any other third party. The solicitation identifies the office where additional information can be obtained concerning qualification requirements as cited in each individual solicitation. It is suggested that small business firms or others interested in subcontracting opportunities in connection with the described procurement make contact with the firm(s) listed. Specifications, plans, or drawings relating to the procurement described are incomplete or not available and cannot be furnished by the Government. Note: An Ombudsman has been appointed to hear concerns from offerors or potential Offerors during the proposal development phase of this acquisition. The purpose of the Ombudsman is not to diminish the authority of the program director or contracting officer, but to communicate contractor concerns, issues, disagreements, and recommendations to the appropriate government personnel. When requested, the Ombudsman will maintain strict confidentiality as to source of the concern. The Ombudsman does not participate in the evaluation of proposals or in the source selection process. Interested parties are invited to call the Ombudsman at +1 (555) 000-0000. DO NOT CALL THIS NUMBER FOR SOLICITATION REQUESTS. Note: Faxed solicitation requests can be submitted to OC-ALC/PKXDA, Tinker AFB OK 73145-3015, FAX NUMBER +1 (555) 000-0000. See Note (s) 23,26.