Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RETAINER, PLANETARY

Active
SPE4A5-26-T-327BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of six planetary retainers, identified by NSN 2910-01-641-3642, under solicitation SPE4A5-26-T-327B issued by the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense. The requirement is for delivery within 171 days of award, with response submissions due by August 12, 2026. Technical and quality mandates are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and physical identification of bare items is required, though Item Unique Identification is waived per the Service customer’s request, invoking DFARS 252.211-7003(c)(1)(i). Measuring and test equipment must be adequate to ensure compliance. Covered defense information is subject to applicable protections, and performance is designated for Cherry Point, North Carolina, with Steven Lewis as the primary point of contact.

General Info

Procure 6 retainer units by August 12, 2026, electronic submission only, source 3H889, delivery to Cherry Point in 171 days.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

336310 - Motor Vehicle Gasoline Engine and Engine Parts ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-327B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Type Changed

Combined Synopsis → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Steven Lewis
contact@example.gov

Full Description

Show more
RETAINER,PLANETARY
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RETAINER,PLANETARY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
ADEQUATE DATA FOR THE NSN/Part Number: 2910-01-641-3642 Quantity: 6 EA Purchase Request: 7017739693QTY: 6 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336310
New
DIBBS
COVER ASSEMBLY
Solicitation # SPE4A5-26-T-328G
The contract pertains to the procurement of a COVER ASSEMBLY with part number 3171222-1 and NSN 4820-01-154-5527, for a quantity of 13 units, under solicitation SPE4A5-26-T-328G. Delivery is required FOB origin with a lead time of 171 days, and the item must be delivered by January 31, 2027, with the original required delivery date set for March 24, 2027. Inspection and acceptance occur at the destination, and no quantity variance is permitted. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering to DLA’s packaging requirements RP001, with palletization also governed by those standards. The DLA Master List of Technical and Quality Requirements takes precedence over all other specifications and includes referenced requirements such as RQ011 for removal of government identification from non-accepted supplies, RQ017 for bare item marking, and RT001 for measuring and test equipment. Unit Identification is not required as per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. All documentation and compliance obligations are governed by the applicable revision of the DLA Master List on the solicitation issue date. The delivery destination is Tinker AFB, Oklahoma, and transportation instructions must follow DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
VALVE, LINE PIERCING
Solicitation # SPE7MC-26-T-115P
The contract requires the procurement of 75 units of a Commercial Off the Shelf line piercing valve equipped with a depressor valve and needle valve shut-off, a dust cover, and a neoprene seal, designed to fit 3/16, 1/4, and 5/16 inch O.D. tubing. The item is identified by NSN 4820-00-499-2211 and must be delivered as an end item tool kit. Strict prohibitions ban the use or incorporation of Class I ozone-depleting chemicals, overriding any conflicting specification requirements without relieving compliance with product performance standards. All substitutions or alternative materials require prior approval. The valve must be packaged in compliance with ASTM D3951 and further meet DLA RP001 packaging requirements for procurement, including palletization standards. Packaging and labeling must adhere to MIL-STD-129 for shipment and storage, incorporating bar-coding as mandated. Inspection and acceptance occur at the destination, with the government conducting final evaluation under FAR 52.246-2. Delivery is FOB origin with a 161-day performance period, targeting a shipment date of December 25, 2026, to the designated DLA Distribution facility in New Cumberland, PA. The contract is fixed-price with zero variance allowed on quantity, and payment must be processed electronically via Wide Area WorkFlow using an invoice and receiving report. The contracting officer has not yet defined the specific contract type, and all contractor representations, certifications, and socioeconomic status disclosures are left to offerors during proposal submission. Compliance with safeguarding defense information controls, trafficking in persons policies, employment eligibility verification, and hazardous material reporting is mandatory, and the supplier must be capable of providing the item as a true COTS product without unauthorized modifications. The award will be based on a solicitation issued July 5, 2026, with proposals due by July 16, 2026, submitted exclusively through the DLA Internet Bid Board System.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-911W
This contract solicits 10 O-rings identified by NSN 5331-01-661-6032 under solicitation number SPE7L1-26-T-911W, with a response deadline of August 17, 2026, and a delivery requirement of 20 days after award. The items must comply with technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless amended. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. Source approval documentation is required as per RC001, and covered defense information guidelines may apply. The use of Class I ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and any substitute chemicals must be approved unless explicitly authorized. Asbestos is banned from all supplied items, and any alternative materials must be validated per Clause L30 and Provision 4 conditions. The contracting activity is under the Department of Defense, Land Supply Chain, with performance set in Norfolk, Virginia, and primary point of contact is Kristina Derry via email and phone.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-915H
The contract pertains to the procurement of 149 units of an O-RING with NSN 5331-01-599-7035 under solicitation number SPE7L1-26-T-915H, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. All supplied items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to delivery. The delivery timeline is 140 days after contract award, with performance occurring at Robins Air Force Base, Georgia, 31098-1887. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the NAICS code is 336310. Primary point of contact is Robert Warne, reachable at robert.warne@dla.mil or 614-852-6219.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
VALVE AND SLEEVE SET A
Solicitation # SPE4A5-26-T-322P
The contract is for a matched valve and sleeve set assembly, metering type, identified by part number 3601509-1 and NSN 4820011138349, supplied by Honeywell International Inc. A total of 43 units are required at a unit price of $43.00, with delivery set for 171 days after award. The item is classified as a critical application item and must conform to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which override any other standards. The supplier must comply with DLA packaging standards including MIL-STD-129 for marking and labeling, ASTM D3951 for general packaging, and RP001 for palletization, with all packaging and labeling adhering strictly to government specifications. Item Unique Identification is not required per the service customer's request, and DFARS 252.211-7003(c)(1)(i) applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with a zero-defect acceptance criterion unless otherwise specified, and attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs. The supplier is required to perform a Cybersecurity Maturity Model Certification Level 2 self-assessment, and measuring and test equipment must be appropriately calibrated and documented. Delivery is FOB origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Cherry Point in North Carolina. The shipment must be ready by January 31, 2027, with the original delivery deadline set for April 30, 2027. All packaging, marking, and transportation must align with DLA Procurement Notes C19 and C20, and the unit of issue is strictly EA as defined in the DLA authorization. The contract is governed under solicitation SPE4A5-26-T-322P, with no variance allowed in quantity.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
IMPELLER, PUMP, CENTRIFU
Solicitation # SPE7LX-26-U-8885
This contract is an indefinite delivery contract for the procurement of centrifugal pump impellers, identified by NSN 2910016319020 and part number 106369, under solicitation SPE7LX-26-U-8885, issued by the Defense Logistics Agency Land and Maritime’s Strategic Acquisition Program Directorate. The contract is a total small business set-aside under NAICS code 336310 with a maximum value of $350,000 and an estimated initial quantity of six units, delivered FOB origin within 88 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific references to MIL-P-16789 for pump packaging and preservation, MIL-STD-2073-1E for packaging practices, and MIL-STD-129 for labeling and barcoding. The impeller must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, sensors, or instruments specified by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. All packaging and marking must comply with DLA-specific packaging requirements, and government-issued identification must be removed from non-accepted supplies. Payment and invoicing are required through Wide Area WorkFlow, with acceptance and inspection occurring at the destination. The contract incorporates multiple FAR and DFARS clauses, including provisions for safeguarding contractor information systems, prohibited substances like hexavalent chromium and toxic materials, subcontracting requirements for commercial products, and mandatory representations regarding small business status, UEI, and CAGE codes. Offerors must submit Safety Data Sheets for all hazardous materials per Federal Standard No. 313 and comply with OSHA’s Hazard Communication Standard. The solicitation requires adherence to strict documentation and representation protocols, including electronic submission of proposals via standard forms, and the contract is subject to deviations applied to several clauses regarding system security, contract types, and small business representation. The point of contact is Theodore Misiolek, and submissions must be received by August 4, 2026, with no option quantities or unit pricing provided in the base solicitation.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336310
New
DIBBS
NOZZLE, FUEL INJECTI
Solicitation # SPE7L1-26-T-914E
This contract pertains to the supply of four fuel injection nozzles, part number 4234350 with NSN 2910-01-560-5519, to be delivered to the Marine Corps Engineer School at Camp Lejeune, North Carolina. The delivery must be completed within 20 days of award, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which override any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and DLA Packaging Requirements, with palletization following RP001 guidelines, and no ozone-depleting chemicals are permitted under any circumstance. The supply must be shipped via traceable freight methods—parcel post is explicitly prohibited—and must be delivered by July 30, 2026. The contract is issued under solicitation SPE7L1-26-T-914E, with the unit of issue being each, at a total price of $4.00, and all technical specifications are governed by the DLA’s authoritative system.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-912X
The contract pertains to the procurement of O-RINGS identified by NSN 5331-01-591-0214, with a total quantity of 3 packing groups, each equivalent to 10 units, for a total of 30 units. Delivery is required within five days of award, and the purchase is linked to request number 7017727133. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with revisions in effect on the solicitation issue date or award date depending on the acquisition type. For simplified acquisitions, the revision active on the solicitation issue date or award date applies, while for larger acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. All supplies must comply with the provision requiring removal of government identification from non-accepted items. The solicitation number is SPE7L1-26-T-912X, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 336310, and the contracting organization is the Department of Defense under the Land Supply Chain. The place of performance is FPO with ZIP 09645-0010, and the primary point of contact is Kristina Derry, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336310
New
DIBBS
O-RING
Solicitation # SPE7LX-26-U-9257
The contract is for the procurement of 1,456 O-RINGS with NSN/Part Number 5331-01-545-0130 under solicitation SPE7LX-26-U-9257, issued by the Department of Defense’s Strategic Acquisition Program Directorate. All items must be free of asbestos, and any alternative materials must comply with Clause L30 and Provision 4 conditions. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and non-accepted supplies must have government identification removed prior to return. Documentation for source approval requests is required, and the delivery deadline is 88 days after award. The solicitation was posted on August 4, 2026, with responses due by August 19, 2026, and is designated as a total small business set-aside under NAICS code 336310. The primary point of contact is Theodore Misiolek, reachable via email and phone provided.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336310
New
DIBBS
VALVE, PROPORTIONAL
Solicitation # SPE4A5-26-T-322X
This contract specifies the procurement of a single proportional valve identified by NSN 4820-01-439-0288 and part number 3605239-2 from Honeywell International Inc. under solicitation SPE4A5-26-T-322X. The item is classified as a commercial item and is designated as a critical application item requiring strict adherence to technical, quality, and cybersecurity standards. All requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. Packaging must comply with MIL-STD-129 and ASTM D3951, subject to precedence of DLA standards, and palletization must follow DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. The contractor must comply with CMMC Level 2 self-assessment and implement physical identification marking per RQ017. Configuration changes require formal engineering change proposals and variance requests. Delivery is due within 171 days FOB origin to Hill AFB, Utah, with inspection and acceptance occurring at destination. The unit of issue is each, quantity is one, and no variance is permitted. The item must be delivered by January 31, 2027, with the original required delivery date of July 30, 2027. All transport and shipping instructions follow DLA procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7LX-26-U-9229
This contract specifies the procurement of a fluid filter element identified by NSN 2910-01-524-3009, with a quantity of 974 units, under solicitation SPE7LX-26-U-9229. The item is designated as a critical application requiring government engineering source approval and is restricted to approved manufacturers including PATRIA LAND SYSTEMS OY, WIX CORP, PARKER-HANNIFIN CORPORATION, and ROSOMAK S.A. Delivery is required within 72 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede other standards, and requires packaging in compliance with ASTM D3951 and labeling per MIL-STD-129, with palletization following RP001 guidelines. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. This is a total small business set-aside under NAICS 336310, with responses due by August 19, 2026, and the government retains full control over configuration changes, deviations, and waiver requests.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336310
New
DIBBS
ADJUSTING, SCREW VAL
Solicitation # SPE7MC-26-T-166J
The contract pertains to the procurement of one adjusting screw valve, identified by NSN 4820-01-486-4802 and part number B4024 from Dante Valve Company, specified as a critical application item made of copper alloy. The item must not contain or come into direct contact with mercury or mercury-containing compounds, except under strictly defined exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents approved by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods and materials, with no special marking required. The item must be delivered FOB destination within 20 days, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Shipment must be via fastest traceable means, not parcel post, to the vessel shipment address USS GABRIELLE GIFFORDS LCS 10, FPO AP 96694, with specific DLA vendor procedures and transport directives applying. The contract is issued under solicitation SPE7MC-26-T-166J, with a required delivery date of July 31, 2026, and falls under NAICS code 336310, managed by the Defense Logistics Agency. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 332119
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A5-26-T-328Q
The contract is for the procurement of two BUSHING, SLEEVE items with NSN 5365-01-729-5733 and part number BACB28AP12Z059, issued under solicitation SPE4A5-26-T-328Q. Delivery is required within 127 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no variance allowed in quantity. The item is classified as a critical application component for Boeing and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Procurement Note C03, and FAA-specific provisions such as bare item marking and airworthiness certification. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with preservation methods specified for dry conditioning and no special marking required. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. The supplier must retain supply chain documentation and ensure all materials meet FAA airworthiness standards, as outlined in DFARS 252.211-7003, despite the absence of unique identification requirements. Transportation and shipping logistics are governed by DLA Procurement Notes C19 and C20, and all documentation must align with the Technical Data Package and associated Contract Data Requirements Lists. The item is subject to the DLA Packaging Requirements and must be delivered on or before December 18, 2026. The contract includes mandatory compliance with quality assurance provisions, and nonconforming supplies must be processed per RQ011 guidelines regarding removal of government identification. All technical specifications referenced are incorporated by link to the DLA eProcurement portal, and the procurement is conducted under the DoD-authorized unit of issue with a unit price and total price specified for the two-piece order.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-323P
The contract pertains to the procurement of five units of a specific shim identified by NSN 5365-01-493-6230 and part number 212-011-731-101, supplied by BELL TEXTRON INC with CAGE code 97499. Delivery is required FOB origin within 171 days of contract award, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination facility. Packaging must comply with MIL-STD-2073-1E, including specified preservation methods, materials, and unit containers, while marking adheres strictly to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. Unit identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). Acceptable sampling follows Sikorsky Corporation’s Alternate Sampling Plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the same address used for freight shipping. The required ship date is January 31, 2027, with an original delivery requirement of October 15, 2027. Technical and quality requirements referenced are governed by the DLA Master List, with applicable revisions determined by the solicitation or award date depending on acquisition scale. The contract is issued under solicitation SPE4A5-26-T-323P, with a unit price of $5.00 per piece for a total value of $25.00.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-325N
The contract is for the procurement of 20 single-leg wire rope assemblies with NSN 4010-01-611-5048 and part number 6898106-107, supplied by Mazzeolla Lifting Technologies, Inc. Delivery is required FOB origin within 171 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, and marking must adhere to MIL-STD-129 without any special codes. Palletization follows DLA standards, and preservation methods are strictly controlled with no mercury or mercury-containing compounds permitted in preservation, packaging, or marking materials. The item must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, applying zero non-conformances unless otherwise stipulated. Mercury is prohibited except in specified exempted applications such as batteries, fluorescent lights, and certain instruments, with portable mercury-containing devices requiring shockproof design and a secondary containment barrier. All deliveries must be sent to the DLA Distribution facility in New Cumberland, PA, and the contract is subject to transportation guidelines outlined in DLAD Proc Notes C19 and C20. The original required delivery date is May 30, 2027, with a needed ship date of January 31, 2027. The solicitation, issued under SPE4A5-26-T-325N, was posted August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 332618 as a federal procurement managed by the Department of Defense’s ASC Supplier Oper OEM Division.
Other Fabricated Wire Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
STAKE, GUY
Solicitation # SPE4A5-26-T-326K
STAKE, GUY is a procurement contract issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION under solicitation number SPE4A5-26-T-326K, requiring delivery of 67 units of item NSN 4030-01-710-7034 with a unit price of $67.00, totaling $4,489. The contract mandates strict adherence to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with all items palletized and labeled according to specified guidelines. Inspection and acceptance occur at the destination, with no variance allowed in quantity. Delivery is due within 171 days of award, with an original required delivery date of March 30, 2027, and a needed ship date of January 31, 2027. The item must be delivered FOB origin to the receiving warehouse in Tracy, California, with transportation governed by DLAD PROC NOTES C19 and C20. The contract enforces a zero-defect sampling standard, requiring compliance with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or with AQLs of 0.1, 1.0, and 4.0 respectively, and any unspecified attributes are treated as major. Acceptance requires zero non-conformances unless otherwise directed. Cybersecurity requirements mandate a CMMC Level 2 Self-Assessment, and all government identification must be removed from non-accepted supplies. The seller is subject to all DLA directives, including unit of issue specifications and packaging standards, with no exceptions permitted. Contract performance is monitored via the point of contact Hien-Van Trinh, and all documentation must reference the authorized DLA unit of issue as defined in official DoD guidelines.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
STAND, COMPRESSED GA
Solicitation # SPE4A5-26-T-325J
The contract is for the procurement of 18 units of a commercial off-the-shelf stand designed for compressed gas cylinders, identified by part number G-600 and NSN 4920-01-587-5435, sourced from First Safety Corporation Inc. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM D3951 packaging standards. Packaging and labeling must follow MIL-STD-129, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with a 171-day lead time, and inspection and acceptance occur at the destination. The quantity is fixed with no variance allowed. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the required ship date set for January 31, 2027, and the original delivery date as July 24, 2027. Each unit is priced at $18.00, totaling $324.00 for the order, under contract SPE4A5-26-T-325J. Transportation details are governed by DLAD Proc Notes C19 and C20, and the unit of issue is each (EA). All government identification must be removed from non-accepted supplies, and compliance with the DLA Master List controls the applicable revision level based on the solicitation or award date.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-IN
Solicitation # SPE4A5-26-T-325E
The contract concerns the procurement of six self-injecting thermometers with NSN 6685-01-643-7750 under solicitation SPE4A5-26-T-325E, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required FOB origin within 171 days of award, with a firm delivery deadline of January 31, 2027, and no variance permitted in quantity. All units must comply with DLA’s technical and quality requirements referenced in the DLA Master List, including sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sampled lots unless otherwise specified. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 with the special marking code 05 indicating a delicate instrument, and palletization must conform to DLA packaging standards. The product is labeled as RTEMP INSTRUMENT CORPORATION P/N B4T6QPX2256X-C3TSVB and requires no government identification removal. The shipment must be sent to the specified receiving warehouse in Tracy, California, following DLA transportation notes C19 and C20, and packaging must comply with hazardous materials standards where applicable. The unit price is $6.00 per unit, totaling $36.00, with all terms governing inspection and acceptance occurring at the destination.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-329T
The contract specifies the procurement of a dial indicating pressure gauge identified by NSN 6685012957435 and part number SG4MC10KPWRONAG, with a requirement for 20 units delivered FOB origin within 291 days. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date controlling compliance. The item is designated as a critical application with specific identification and marking requirements per MIL-STD-129 and the special marking code 05 for delicate instrument. Packaging must conform to MIL-STD-2073-1E with defined packaging methods, materials, and unit container codes, and palletization must adhere to DLA packaging rules. Mercury and mercury-containing compounds are strictly prohibited unless functional use is explicitly exempted and meets safety standards outlined in NAVSEA 5100-003D, requiring secondary containment for portable devices. Inspection and acceptance occur at the origin, and government identification must be removed from non-accepted items. Item Unique Identification is not required per customer request. Measuring and test equipment used must meet RT001 standards, and the contract references the QAP-106 and MIL-G-18997E technical documentation. The purchase request number is 7017742652, the solicitation number is SPE4A5-26-T-329T, and point of contact is Aprile Corley of the Department of Defense’s ASC Supplier Oper OEM Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
ADAPTER, GAGE
Solicitation # SPE4A5-26-T-321C
The contract pertains to the procurement of an Adapter, Gage with NSN 6685-00-274-5533 and part number 421371-1, manufactured by Enerpac Tool Group Corp under specification SPE4A5-26-T-321C. Nine units are required at a unit price of $9.00, with delivery due in 171 days FOB origin to DLA Distribution San Diego. The item is classified as a critical application item requiring physical identification and compliance with MIL-STD-129 marking standards. Packaging must adhere to MIL-STD-2073-1E, with specific preservation methods and unit containment codes, and palletization must meet DLA’s packaging requirements. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling plans specified by MIL-STD-1916 or equivalent zero-based systems, unless otherwise designated. Attributes are assigned verification levels or AQLs per defined standards, and unspecied attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited except in exempted functional components such as batteries or instrument sensors, which must include secondary containment as per NAVSEA 5100-003D. Configuration changes require formal engineering change proposals or variance requests, and government identification must be removed from non-accepted supplies. Covered defense information provisions apply, and the contract explicitly excludes Item Unique Identification per DFARS 252.211-7003(c)(1)(i). The solicitation opened on August 4, 2026, with responses due August 12, 2026, and performance is directed under DLA’s authorized unit of issue system with full alignment to technical and quality requirements referenced from the DLA Master List.
Other Measuring and Controlling Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, PLATE
Solicitation # SPE4A5-26-T-328K
The contract pertains to the procurement of 24 plain plate nuts with NSN 5310-00-241-0092 under solicitation SPE4A5-26-T-328K, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. Delivery is required within 115 days after award, with responses due by August 12, 2026. The item has no shelf life requirement and does not require Unique Item Identification as specified by the Service customer, in accordance with DFARS 252.211-7003(c)(1)(i). Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and government identification must be removed from non-accepted supplies. Bare items must be physically marked according to RQ017, and measuring and test equipment used must meet specified standards. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Zero non-conformances are required unless otherwise stated. Data supporting this procurement is deemed proprietary or insufficient for competitive bidding. The place of performance is Cherry Point, North Carolina, 28533-5040, with Jaelyn Buford listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334513
New
DIBBS
THERMOMETER, SELF-INDIC
Solicitation # SPE4A5-26-T-330M
The contract specifies the procurement of 36 digital, self-indicating thermometers, identified by the part number FLUKE 62 MAX and NSN 6685-01-613-2829, as a commercial off-the-shelf item. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date or award date, depending on the acquisition size. The item must meet stringent packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including a special marking code for “Delicate instrument.” Preservation methods prohibit mercury or mercury compounds in packaging and require dry, controlled environments. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are assigned the highest verification levels. Delivery is FOB origin with a strict 36-unit quantity allowance with no variance permitted, and the item must be delivered to a designated DLA warehouse in Tracy, California, by January 31, 2027, after an initial required delivery date of November 25, 2026. Transportation and shipping instructions align with applicable DLA procedural notes, and the contract is administered under solicitation SPE4A5-26-T-330M with a unit price of $36.00 per unit.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
BATTERY CHARGER, AIR
Solicitation # SPE4A5-26-T-326V
The contract is for the procurement of six battery chargers, air model, identified by NSN 4920-01-498-2543 and part numbers 4159-MIL and CA 1550 MIL from Lamar Technologies LLC, with delivery required within 171 days under a total small business set-aside. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements, including palletization per RP001. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application requiring strict configuration control and physical identification, and non-approved sources must obtain source approval from the design control activity with technical data packages submitted with their offer. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The purchase request number is 7017739882, unit of issue is EA, quantity is fixed at six units with zero variance allowed, and the required delivery date is January 31, 2027, with an original target of January 26, 2027. All markings, labeling, and documentation must adhere to applicable DoD and DLA directives, and transportation follows DLAD procedural notes C19 and C20.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
RELAY BOX ASSY
Solicitation # SPE4A5-26-T-329V
The contract pertains to the procurement of one Relay Box Assembly with part number 145E2032-5 and NSN 6615-01-244-9740, issued under solicitation SPE4A5-26-T-329V by the Department of Defense’s ASC Supplier Oper OEM Division. Delivery is required within 171 days from the contract award, with FOB origin terms and a strict zero variance in quantity. Inspection and acceptance occur at the manufacturer’s origin, in accordance with MIL-STD-1916 or a comparable zero-based sampling plan, with critical attributes requiring a verification level of VII or an AQL of 0.1. Non-conforming items must have government identification removed prior to return. The contractor must comply with DLA’s tailored quality requirements, packaging standards per MIL-STD-2073-1E, and marking requirements under MIL-STD-129, using code U for packaging and no special marking. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment. The item is not subject to Item Unique Identification. Delivery is to DLA Distribution San Joaquin at Tracy, California, with transportation governed by DLA procedural notes C19 and C20. The contract enforces the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details