Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

29--VALVE,FLOAT,AIRCRAF

Active

N0038307G006H5041Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of three units of a valve float for aircraft (NSN 7R-2915-008702599-LC) with delivery FOB origin. The items are to be issued to Parker Hannifin Customer Support located in Irvine, California. Parker Hannifin is identified as the sole approved source for this procurement, emphasizing the exclusivity of the supplier. The contract does not include any drawings, and specific notes referenced (9, 22, 26) likely contain additional pertinent details related to the requirements and conditions. Issued by the Department of Defense through the Naval Supply Systems Command Weapon Systems Support, this solicitation was posted on November 28, 2007, and is designated under solicitation number N0038307G006H5041. The contract is classified as a presolicitation and does not specify a set-aside or NAICS code. The administrative office is located in Philadelphia, Pennsylvania, though the exact place of performance is unspecified. This procurement supports military logistics by ensuring the supply of critical aircraft components from a certified source.

General Info

Procurement of three valve floats from sole source Parker Hannifin, FOB origin to Irvine, CA.

Agency

Department Of Defense → Navsup Weapon Systems Support

NAICS

332912 - Fluid Power Valve and Hose Fitting Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation

PostedNov 28

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support

ContactsNo contacts available

OfficePHILADELPHIA, PA, 19111-5098, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support

Office AddressPHILADELPHIA, PA, 19111-5098, USA

ContactsNo contact information available

Full Description

Show more

NSN 7R-2915-008702599-LC, IAW REF NR 4-1058-201, QTY 3 EA, DELIVERY FOB ORIGIN, ISSUE TO PARKER HANNIFIN CUSTOMER SUPPORT, IRVINE, CA 92618-1814. There, are no drawings. Subject requirement is for the procurement of an item where,,,, Parker Hannifin is the only approved source. -SEE NOTES 9, 22, 26

Similar Contracts

Same NAICS industry code

PARTS KIT, SOLENOID

Solicitation # SPE7MC-27-T-1402

Solicitation SPE7MC-27-T-1402 is a small business set-aside issued by the DLA Weapons Support Maritime Hardware/Electrical for the procurement of 16 solenoid parts kits (NSN 4810-01-569-5253). The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania within 45 days. The award process incorporates a HUBZone price evaluation preference, and the government explicitly prohibits the use of additive manufacturing for the production of these items. The contractor must adhere to strict packaging and marking standards, specifically MIL-STD-2073-1E for kit packaging and MIL-STD-129 for marking. Each kit must include a detailed parts list and any applicable assembly instructions, with loose hardware secured in sealed containers to prevent corrosion. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Compliance with the Buy American Act, Berry Amendment, and various DFARS cybersecurity and hazardous material regulations is mandatory. Inspection and acceptance will occur at the destination.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

VALVE, THERMO, EXPANSION

Solicitation # SPE3SE-27-Q-0069

Solicitation SPE3SE-27-Q-0069 is a small business set-aside for the procurement of one expansion thermostatic valve, identified by NSN 7310-01-173-7891 and Delta Industries part number FF-1/4-C. This firm-fixed-price contract is issued by the DLA Troop Support Subsistence FSE Supply Chain, with a required delivery timeline of 30 days after receipt of order. The item must be delivered to the destination for both inspection and acceptance. Offerors are required to submit quotes via the DIBBS portal and must provide a realistic delivery schedule and a complete data package for evaluation. Alternate parts are not acceptable for this solicitation. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Technical and quality requirements from the DLA Master List take precedence over ASTM standards. Environmental and safety compliance is critical, including the prohibition of intentionally added mercury and the requirement for a second boundary of containment per NAVSEA 5100-003D. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The award is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and prohibitions on the use of certain foreign telecommunications equipment.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-27-T-1401

Solicitation SPE7MC-27-T-1401 is a fixed-price request for quotations for the procurement of five fluid valve stems, identified by NSN 4820-01-355-0268. The contract is issued by the DLA Weapons Support Maritime Hardware/Electrical office and is designated as a small business set-aside, with a price evaluation preference available for certified HUBZone small business concerns. Deliveries are to be made to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of October 19, 2024, and a need ship date of May 22, 2024. Inspection and acceptance will occur at the destination, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001. The contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging must adhere to RP001 and MIL-STD-129, and the Buy American Act and Berry Amendment apply to all materials. Additive manufacturing is prohibited unless specifically authorized. Quotations must be submitted via the DIBBS portal by November 16, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 8 hours ago

DEADLINE

Fluid Valve Stem Supply (NSN 4820011379773)This subcontract involves the supply of one fluid valve stem for the USS BATAAN LHD 5 under a Defense Logistics Agency contract. The provider is responsible for manufacturing or sourcing hardware that matches Emerson Automation Solutions part numbers [phone hidden] or NMP-1521. All items must be delivered FOB Destination and must adhere to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129. The contract requires full compliance with the Buy American Act, the Berry Amendment, and DLA RA001 quality requirements. Identified by NSN 4820011379773 and NAICS code 332912, the opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026. Performance is designated for FPO 09554.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Flow Control Valves (NSN 4820-01-563-5696)This subcontract, issued by the Department of Defense for DLA Weapons Support Land Supplier Opns Vehicle Spt, requires the procurement of 22 Flow Control Valves under NSN 4820-01-563-5696. The selected provider must manufacture or source these valves to exact specifications, ensuring all hardware is mercury-free. Compliance with the DLA Master List for quality control is mandatory, and all shipments must adhere to MIL-STD-129 and RP001 palletization standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 332912. Final delivery of the 22 completed valves is required FOB Origin to DLA Distribution in Anniston, Alabama. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of High-Pressure Rubber Hydraulic Hose AssembliesThis subcontract involves the manufacture and supply of 19 high-pressure nonmetallic rubber hydraulic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required assemblies must feature a 7/8 inch inner diameter and a length of 27-5/8 inches, with a pressure rating of 3000 PSI. The contractor is responsible for ensuring all units are packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, which includes the application of necessary shelf-life markings. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332912.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Hydraulic Parts Kit SupplyThis subcontract involves the sourcing and assembly of a specialized hydraulic manifold parts kit for prime contractors supporting the DLA Weapons Support Land Supply Chain within the Department of Defense. The scope of work specifically covers NSN 2530-01-596-0293 and Part Number YMD-8840-R, requiring the delivery of one complete kit accompanied by detailed parts lists and assembly instructions. The contractor must ensure strict adherence to MIL-STD-129, DFARS 252.204-7012, and DFARS 252.223-7008 standards. This requirement falls under NAICS code 332912, with the place of performance located at FPO 96678. The solicitation was posted on November 3, 2026, with a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (Caterpillar P/N 7D2629)This subcontract involves the procurement or manufacture of two nonmetallic hose assemblies to support DLA Weapons Support supply contracts. The assemblies must strictly adhere to Caterpillar Inc P/N 7D2629 and NSN 4720010599631 specifications, while complying with DLA Packaging Requirements RP001 and Technical/Quality Requirements RA001 for Critical Application Items. The contract is managed under the Department of Defense through the DLA Weapons Support Land Supply Chain, with performance taking place in Barstow, California. Delivery of the units is required on a FOB Origin basis. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hydraulic Manifolds (NSN 4730015658814)This subcontract involves the manufacture or procurement of three specialized hydraulic manifolds, identified by NSN 4730015658814, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The project requires strict adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards, specifically utilizing Special Marking Code 32. Performance will take place in Tracy, California, under NAICS code 332912. Compliance requirements are rigorous, necessitating adherence to the Buy American Act and the Berry Amendment. Additionally, the contractor must maintain NIST SP 800-171 cybersecurity standards to ensure data protection. The response deadline for this opportunity is November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

STEM, FLUID VALVE

Solicitation # SPE7MC-26-T-302T

Solicitation SPE7MC-26-T-302T is a small business set-aside request for quotations for 26 units of corrosion-resistant steel fluid valve stems, identified by NSN 4820009501894 and Steward Machine Co Inc part number 591-603. The procurement is managed by the DLA Land and Maritime Maritime Hardware/Electrical office, with a required delivery date of November 20, 2025, and a need ship date of March 3, 2026. Delivery is set for 35 days after order, with shipping and acceptance occurring at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, alongside DLA packaging requirements RP001. Technical and quality standards are governed by the DLA Master List, with specific prohibitions against the intentional use of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

VALVE, HYDRAULIC, DUMP

Solicitation # SPE7M2-27-Q-0051

Solicitation SPE7M2-27-Q-0051 is a firm-fixed-price request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 294 hydraulic dump valves, NSN 4820-01-082-7257. This is a restricted source item designated as a critical application item, requiring engineering source approval by the government design control activity. The procurement specifies adherence to TDP Rev B Gen 2, reference drawing NR 81755 C7903 Revision P, and quality assurance per QAP 16236 SQAP010827257. Delivery is required 396 days after date of award, with inspection and acceptance occurring at the origin. The contract mandates strict compliance with DLA packaging requirements and ASTM D3951, with marking and labeling per MIL-STD-129. Environmental restrictions prohibit the use of Class I ozone depleting chemicals. Award will be based on best value, evaluating past performance, offered delivery, and price. Contractors must utilize the Wide Area WorkFlow system for invoicing and comply with DFARS 252.204-7012 for safeguarding covered defense information. This solicitation is not a small business set-aside and requires offerors to be registered in the System for Award Management.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

in about 16 hours

PARTS KIT, HYDRAULIC

Solicitation # SPE7L1-27-T-3333

Solicitation SPE7L1-27-T-3333 is a small business set-aside request for quotations issued by the DLA Weapons Support Land Supply Chain for one hydraulic manifold parts kit, identified by NSN 2530015960293 and part number YMD-8840-R. The requirement specifies a delivery lead time of 20 days with shipping terms set as FOB Destination, where both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1 Appendix D for kits and MIL-STD-129 for marking. Each kit must include a detailed parts list and, if applicable, assembly instructions, with all loose hardware secured in sealed containers to prevent damage. The contract incorporates various federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for cybersecurity and incident reporting. Prohibitions are in place against the use of Class I ozone-depleting chemicals and additive manufacturing unless specifically authorized. Payment must be processed electronically through the Wide Area WorkFlow system. Offerors must submit their quotations via the DLA Internet Bid Board System by November 16, 2026, and must provide Safety Data Sheets for any hazardous materials to remain eligible for award.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support

Same awarding agency

Specialized Avionics Component SupplyThe Specialized Avionics Component Supply subcontract involves the procurement of flight-grade electronic components, circuit boards, and sub-assemblies to support Navsup Weapon Systems Support projects for the Department of Defense. The scope of work focuses on sourcing aerospace-grade semiconductors, capacitors, and integrated circuits specifically compatible with part numbers 8444316 and 8344400G002. To maintain flight-critical safety standards, the provider must deliver certified aerospace electronic components accompanied by Certificates of Conformance. This requirement ensures all supplied materials meet the rigorous quality and safety specifications necessary for aviation applications under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Flight Director Computer Repair ServicesThis subcontract for the Department of Defense and Navsup Weapon Systems Support involves the technical repair and overhaul of flight director computers. The scope of work requires the processing of 80 total units, specifically 20 units of part number 8444316 and 60 units of part number 8344400G002, utilizing specialized avionics testing and diagnostic equipment to deliver certified hardware. Compliance is mandatory regarding 10 USC 3204(A)(1) and the NAVSUP WSS Source Approval Information Brochure, which necessitates Government Source Approval. The project falls under NAICS code 334220, with a response deadline set for November 20, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Precision Component SupplyThe Precision Component Supply subcontract, issued by the Navsup Weapon Systems Support under the Department of Defense, involves the provision of replacement parts, seals, gaskets, and custom-machined components. These materials are intended for prime contractors working on Department of the Navy heat exchanger repair projects, specifically adhering to OEM or government specifications for NSN 1660-01-454-5010. The contractor is responsible for manufacturing or sourcing components delivered as individual parts or kits, while ensuring full compliance with Buy American and Trade Agreements Act certifications of origin. This opportunity falls under NAICS code 326299, with a response deadline set for December 3, 2026.

All Other Rubber Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

Heat Exchanger Repair & ModificationThis subcontract, issued by Navsup Weapon Systems Support under the Department of Defense, involves the teardown, evaluation, repair, and modification of Fluid Heat Exchangers (NSN 1660-01-454-5010) for prime contractors on Department of the Navy projects. The scope of work requires the execution of complete unit teardowns and technical component evaluations to return items to Ready For Issue condition, utilizing precision measurement tools and pressure testing equipment. The contractor is responsible for delivering seven repaired heat exchangers along with approved test procedures. This opportunity falls under NAICS code 811310, with a response deadline set for December 3, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

MIL-STD-2073 Compliant PackagingThis subcontract involves providing packaging materials and final packaging services for prime contractors supporting Navsup Weapon Systems Support under the Department of Defense. The primary objective is the secure packaging of sensitive electronic instruments in strict accordance with MIL-STD-2073 standards to ensure assets are protected from damage during transit. The scope of work includes the delivery of properly packed and labeled assets destined for DLA Distribution centers located in New Cumberland, Pennsylvania, and Tracy, California. This opportunity falls under NAICS code 561910, with a response deadline set for December 4, 2026.

Packaging and Labeling Services

POSTED

about 13 hours ago

DEADLINE

SAE-AS22759 Series Wire SupplyThis subcontract involves the procurement and delivery of high-performance aerospace-grade wiring for prime contractors supporting Navsup Weapon Systems Support projects under the Department of Defense. The primary objective is to supply SAE-AS22759 series wire to replace MIL-W-81381 wire specifically for use in pressure transmitter repairs. The supplier is required to provide certified aerospace wiring along with certifications of conformance to SAE-AS22759 standards. This opportunity falls under NAICS code 423610, with a response deadline set for December 4, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Pressure Transmitter Repair and Testing ServicesThis subcontract for Pressure Transmitter Repair and Testing Services involves the teardown, evaluation, repair, and modification of pressure transmitters under NSN 6685-01-579-6971 for Navsup Weapon Systems Support projects. The primary objective is to restore units to operational status and Ready For Issue condition through rigorous testing, inspection, and the generation of detailed inspection reports. To qualify, providers must maintain ISO 9001 or AS9100 certification, adhere to ANSI/NCSL Z540.3 calibration standards, and possess IPC/EIAJ-STD-001C certified soldering capabilities. The contract falls under NAICS code 334513 and requires the delivery of both the repaired transmitters and their corresponding technical reports.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 13 hours ago

DEADLINE

Aerospace Component Finishing and CoatingThis subcontract for Aerospace Component Finishing and Coating supports NAVSUP Weapon Systems Support projects by providing specialized surface treatments, coatings, and finishes for fan components. The selected contractor will apply aerospace-grade finishes, plating, and anti-corrosion coatings using industrial equipment that adheres to strict aerospace standards. To ensure quality and compliance, the provider must hold ISO 9001 or SAE AS9100 certification. Deliverables include the finished components accompanied by comprehensive process certification records and detailed pass/fail inspection data based on applicable technical publications. This opportunity falls under NAICS code 332813 and is managed under the Department of Defense. Interested parties must submit their responses by December 4, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Aircraft Fan Replacement Parts SupplierThis subcontract involves the supply of replacement parts, materials, and hardware to prime contractors supporting NAVSUP Weapon Systems Support projects. The primary objective is to restore Vanexial Fans to ready-for-issue condition through the procurement or manufacture of new and refurbished components specifically for part numbers 123SCEC5221-13 and 60716-201. The supplier is responsible for delivering certified replacement parts to the designated repair facility. All deliverables must include material certifications and certificates of conformance that adhere to the provided Technical Data Package and established aerospace standards. This effort falls under NAICS code 336413 for the Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

Vanexial Fan Overhaul and RFI RestorationThis subcontract for the Department of Defense and NAVSUP Weapon Systems Support involves the comprehensive teardown, evaluation, repair, overhaul, and modification of Vanexial Fans. The selected contractor is responsible for disassembling units, executing repairs according to specific technical data packages, and conducting rigorous acceptance tests to ensure all fans are delivered in Ready for Issue condition along with complete historical record files. To ensure quality and precision, the contractor must maintain ISO 9001 or SAE AS9100 certification and utilize calibration systems that meet ANSI/NCSL Z540.3 or ISO-10012-1 standards. Additionally, all work must comply with MIL-STD-130 and MIL-STD-2073-1 regulations. This project falls under NAICS code 811210, with a response deadline set for December 4, 2026.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Five-Year Requirements Contract

Solicitation # N0038327RA058

Navsup Weapon Systems Support is seeking a five-year requirements contract for the repair of flight director computers under solicitation N0038327RA058. The scope of work includes the repair of 20 units of Flight Director Computer part number 8444316 (NIIN 015716898) and 60 units of Flight Director Computer part number 8344400G002 (NIIN 014971438). This procurement is issued pursuant to 10 USC 3204(A)(1) and falls under NAICS code 336413. Due to the flight-critical nature of these items and the inadequacy of available technical data for full and open competition, government source approval is required prior to contract award. BAE Systems Information and Electronic Systems Integration Inc. is currently identified as the only qualified source. Prospective offerors who are not already approved must submit the necessary technical data as detailed in the Navsup Weapon Systems Support Source Approval Information Brochure to be considered for award.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

99--ROTODOME GEARBOX, A

Solicitation # N0038327QMA21

POSTED

about 13 hours ago

DEADLINE

in about 2 months

Earlier notices in this NAICS code

Posted before this notice, open and closed

99 -- Miscellaneous Items

Solicitation # SPM7MX-07-R-0039

POSTED

almost 19 years ago

CLOSED

almost 19 years ago

16 -- Deutsch-Successor

Solicitation # SP070005R4306

POSTED

almost 19 years ago

CLOSED

about 19 years ago

47--Parts for the Inland Petroleum Distribution System

Solicitation # W912GY07T0067

W6QK Siad Contr Office

POSTED

about 19 years ago

CLOSED

about 19 years ago

47--Strainer Insert for the Tactical Petroleum Terminal Model TPT-1

Solicitation # W912GY07T0063

W6QK Siad Contr Office

POSTED

about 19 years ago

CLOSED

about 19 years ago

Solicitation # N00406-07-T-1728

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 19 years ago

CLOSED

about 19 years ago

16--Aircraft Components and Accessories

Solicitation # FA8203-07-R-70742

POSTED

about 19 years ago

CLOSED

about 19 years ago

48--Mount Morris Dam Valves, Mt Morris, Livingston County, NY

Solicitation # W912P4-07-B-0005

W072 Endist Buffalo

POSTED

about 19 years ago

CLOSED

about 19 years ago

48 -- Gate Valve Repair applicable to the HH-60G helicopter

Solicitation # FA8509-07-R-10251

POSTED

about 19 years ago

CLOSED

over 19 years ago

A--FLUID CONTROL SYSTEM

Solicitation # N6554007Q5486

POSTED

about 19 years ago

DEADLINE

25--Vehicular Furniture and Accessories

Solicitation # W56HZV07R0670

W4GG Hq US Army Tacom

POSTED

about 19 years ago

CLOSED

about 19 years ago

10--AWARD OF FIVE (5) YEAR IDIQ CONTRACT FOR VALVE, CHECK; NSN: 4820-01-439-1792; PART NUMBER: 12979824.

Solicitation # W52H09-07-R-0330

W4GG Hq US Army Tacom

POSTED

about 19 years ago

CLOSED

about 19 years ago

47 -- Nozzle, Fire Hose & Couplings

Solicitation # 7FLA-Z5-07-4701-N

Gsa/fas Region 7 Acqusition Center

POSTED

over 19 years ago

CLOSED

over 19 years ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS