Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, June 24 at 2:00 PM EDT

Register Free →

30--CYLINDER ASSEMBLY,A

Active
N0010426QYA9DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the procurement of 16 units of a Cylinder Assembly, identified by NSN 7H-3040-151801870 and part number 7377582, to be delivered to two Department of Defense locations: DLA Distribution in New Cumberland, PA, and DLA Distribution in Tracy, CA. NAVSUP Weapon Systems Support Philadelphia plans to issue a sole source solicitation to L3 Technologies, the original equipment manufacturer (OEM) and the only known source for this spare part. Since the government does not possess the rights to the data required to acquire this item from other suppliers, all acquisitions will be exclusively from L3 Technologies unless other approved sources are submitted and accepted. The contract will last for one year, will follow FAR Part 15 procedures, and include applicable UID and Buy American clauses. While this is a sole source procurement justified under 10 U.S.C. 2304(c)(1) and FAR 6.302, the government invites capable firms to submit capability statements within 15 days to demonstrate if they can supply the item commercially, although this notice does not represent a competitive solicitation. The solicitation is expected to be posted on NECO around May 27, 2026, with a response deadline near June 26, 2026, and award anticipated by August 26, 2026. Electronic submissions are required, no hard copies will be sent, and communications are directed to the contracting officer via email. This procurement is not set aside as a Total Small Business Set-Aside despite the conflicting data in the solicitation information.

General Info

Procurement of 16 Cylinder Assemblies sole sourced to L3 Technologies, delivery to two DoD sites.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

333995 - Fluid Power Cylinder and Actuator Manufacturing View NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-3040-151801870, TDP VER 001, REF NR D1216364, QTY 16 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, DELIVER TO W62G2T, W1A8 DLA DIST SAN JOAQUIN, TRACY, CA 95304-5000. NAVSUP Weapon Systems Support (NAVSUP WSS) Philadelphia intends to solicit on a sole source basis with L3 Technologies (CAGE: 34228) for the SPARE of Items Below: Nomenclature NIIN Part Number Cylinder Assembly, A 151801870 7377582 There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing SPARE support of the above SPARE part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 333613 PSC: 3040 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 27 May 2026 with an approximate response/closing date of 26 June 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 26 August 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Deja Thompson-Mitchell deja.s.thompson-mitchell.civ@us.navy.mil.

Similar Contracts

NAICS: 333995
New
Federal
CylinderThe contract requires the supply of a heavy-duty industrial hydraulic cylinder with a 14-inch bore and a 36-inch stroke, equipped with a 7-inch diameter chrome-plated rod that is induction hardened for durability and corrosion resistance. The cylinder must feature a front flange mounting configuration compatible with standard 14-inch bore industrial dimensions and be capable of continuous operation at a working pressure of 3,000 PSI, designed with industry-standard safety factors. It will be constructed for harsh environments, suitable for indoor or outdoor use with exposure to dust and moisture, and compatible with phosphate ester hydraulic fluids through all seals and elastomeric components. The cylinder will have a non-cushioned design at both ends, and ports sized appropriately for high-pressure hydraulic operation, with connection types defined during design review. Performance-wise, the cylinder must operate at full stroke and full pressure without deformation or leakage, and both rod and cap ends must be rated for the full operating pressure. The rod end connection type will be finalized during design review, allowing for threaded, clevis, or spherical bearing attachments. Each unit is to be pressure tested to at least 1.5 times the rated working pressure before shipment, and must meet stringent leakage criteria. Maintenance considerations include seal replacement and rod serviceability with standard shop tools, with the vendor providing seal kits and maintenance guidelines. Documentation will include detailed dimensional drawings and certification of pressure rating and fluid compatibility. This contract is a total small business set-aside, solicited by the Department of Defense at Fort Drum, NY, with responses due by June 11, 2026.
W6QM Micc-Ft Drum

POSTED

2 days ago

DEADLINE

in 1 day
View Details