This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on October 26, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

31--ROLLER,LINEAR-ROTAR

Closed

SPE4A626T6287Federal

Submission Closed11/03/2025, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332991

New

DIBBS

Supply of Ball Joints (NSN 3040218786687)This subcontract involves the procurement of 298 units of ball joint hardware, identified by NSN 3040218786687, to support prime contractors fulfilling DLA supply contracts. The selected provider is responsible for manufacturing or sourcing new components that strictly adhere to technical specifications, with a clear prohibition against the use of reconditioned or surplus items. The contract mandates strict adherence to military standards for logistics and compliance, specifically requiring packaging per MIL-STD-2073-1E and RP001, and shipment marking according to MIL-STD-129. Additionally, the provider must comply with DFARS 252.223-7008 and 252.225-7007 regulations. This requirement is managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Supplier of Collet Bodies for Linde Welding TorchesThis subcontract involves the supply of 239 welding torch collet bodies and gas lens collet bodies to prime contractors supporting the Defense Logistics Agency Weapons Support Nuclear Reactor Program. The required parts must be compatible with Linde Model HW-20 and HW-25 Torches and match NSN 3431001236684. Performance will take place in San Diego, California, under NAICS code 332991. The supplier is required to adhere to strict quality and regulatory standards, including Critical Application Item specifications and Buy American DFARS 252.225-7001 standards. Additionally, all shipments must comply with MIL-STD-129 marking requirements. The response deadline for this opportunity is November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Fluid Pressure Line Connector SupplyThis subcontract, issued by the Department of Defense under the DLA Weapons Support Maritime Supply Chain ESOC Buys, requires the procurement of one fluid pressure line multiple connector identified by NSN 4730014749295. The selected source or manufacturer must ensure the item is packaged according to ASTM D3951 standards and marked and labeled in compliance with MIL-STD-129. The physical unit must be delivered to Fort Benning, Georgia, within five days of the contract award. This requirement falls under NAICS code 332991 and is intended for prime contractors fulfilling DLA supply contracts.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Actuator Bearing Assembly ManufacturingThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture and assembly of 56 Actuator Bearing Assemblies. The selected contractor must utilize high-precision CNC machining to produce components according to Reference Drawing NR 98752 and ensure all final units are assembled in strict compliance with TDP Rev B Gen 2 and SAE AS9100 standards. As part of the quality assurance process, the contractor is required to perform a First Article Test on one unit and submit the corresponding test reports. The project is designated as a Total Small Business Set-Aside under NAICS code 332991, with the place of performance located at Hill AFB. Interested parties must respond by November 5, 2026, to be considered for this precision manufacturing effort.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Aluminum Alloy Tubing SupplierThis subcontract involves the supply of raw aluminum alloy tubing for prime contractors supporting the DLA Weapons Support Land Supply Chain. The required material must feature a 1/2 inch outer diameter and a 0.062 inch wall thickness, ensuring full compliance with Pratt & Whitney Canada Corp part number 3014948. Performance will take place in Cherry Point, North Carolina. To ensure quality and regulatory adherence, the supplier must comply with the Buy American Act and provide comprehensive material certifications and mill test reports to verify the alloy composition and dimensions. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement under NAICS code 332991.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

CLOTH, FOCUSING, PHOTOGR

Solicitation # SPE8EN-27-T-0224

Solicitation SPE8EN-27-T-0224 is a request for quotations issued by DLA Troop Support for the procurement of 50 units of photographic focusing cloth, identified by NSN 6760-01-377-5709. The contract specifies a delivery timeframe of 94 days after order, with a need ship date of February 12, 2027, and a required delivery date of March 4, 2027. Shipping is established as FOB Origin under the First Destination Transportation program, with the delivery destination set as the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, while ensuring compliance with DLA Master List technical requirements and RP001 packaging requirements. Key regulatory obligations include the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. The solicitation is categorized under NAICS code 332991 and requires offerors to maintain active registration in the System for Award Management.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-R-X128

Solicitation SPE4A6-27-R-X128 is a small business set-aside for the procurement of one annular ball bearing, part number 3110-01-034-7002, designated as a critical application item. The contract is a firm fixed price award with a delivery requirement of 184 days after the order date, shipped FOB destination. Technical compliance is governed by TDP Rev A Gen 1 and Basic QAP 13873 QAP-B02 Revision B, with quality standards adhering to ISO 9001:2015. Packaging, preservation, and marking must comply with MIL-DTL-197M, MIL-STD-129, and MIL-STD-2073-1E, while palletization must follow DLA requirement RP001. A critical sourcing restriction applies under DFARS 252.225-7016, requiring the bearing to be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total cost of the bearing components originating from these regions. Offerors must provide a signed Contractor’s Declaration regarding the domestic or foreign nature of the material to be considered for award. The government will determine the best value based on a comparative assessment of price, past performance, and delivery, with SPRS assessments weighted most heavily within the past performance evaluation. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, ROLLER, CYLINDR

Solicitation # SPE4A6-27-T-7350

Solicitation SPE4A6-27-T-7350 is a request for quotations from the DLA Weapons Support ASC Commodities Division for the procurement of 41 cylindrical roller bearings, identified by NSN 3110-01-446-5157. The items are designated as critical application items and must be delivered FOB Origin within 151 days, with a required delivery date of March 20, 2027. Inspection and acceptance will occur at the destination. A primary requirement of this contract is strict domestic sourcing; awards will only be made for bearings manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the total component cost originating from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds. Technical compliance is governed by MIL-DTL-197M for preservation and packaging, MIL-STD-2073-1E for packaging data, and MIL-STD-129 for marking. Quality assurance requires adherence to the DLA Master List of Technical and Quality Requirements and specific sampling methods such as MIL-STD-1916 or ASQ H1331. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RETAINER, BALL, BEARI

Solicitation # SPE4A6-27-T-7442

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

CASE, PHOTOGRAPHIC EQUI

Solicitation # SPE8EN-27-T-0227

Solicitation SPE8EN-27-T-0227 is a request for quotations issued by DLA Troop Support for the procurement of 96 photographic equipment cases, specifically identified as Pelican Products Inc part number 1610NF (NSN 6760-01-491-2810). The items are black cases without foam and are not required to use class I ozone depleting substances. The contract specifies a delivery timeframe of 60 days after order, with a need ship date of October 28, 2026, and an original required delivery date of February 27, 2027. Delivery is set as FOB Origin, with the destination and acceptance point located at the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The procurement is not a small business set-aside and requires compliance with various federal and defense regulations, including the Buy American Act and the Berry Amendment. Packaging must adhere to ASTM D3951 and RP001 DLA Packaging Requirements, while marking and labeling must follow MIL-STD-129. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates significant cybersecurity and information security requirements under DFARS 252.204-7012 and requires the safeguarding of covered defense information. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-7325

Solicitation SPE4A6-27-T-7325, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for the procurement of 305 sleeve bearings (NSN 3120-01-339-8371). The contract specifies a delivery timeframe of 171 days after award, with a need ship date of April 26, 2027, and an original required delivery date of July 30, 2027. Delivery is established as FOB Origin, with the destination being DLA Distribution San Joaquin in Tracy, California. The procurement is part of the First Destination Transportation program and may be eligible for automated award. Technical compliance requires adherence to MIL-B-5687D and quality standards such as SAE AS9003 or ISO 9001. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, with a strict prohibition on the use of mercury or mercury compounds in preservation and packaging. Inspection and acceptance will occur at the point of origin. Offerors must submit quotes via the DIBBS portal by November 5, 2026, and must comply with various federal regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity reporting requirements. Payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

BEARING, BALL, ANNULAR

Solicitation # SPE4A6-27-T-7394

Solicitation SPE4A6-27-T-7394 is a request for the procurement of 41 annular ball bearings (NSN 3110017234936, Part Number BACB10A301) for the DLA Weapons Support ASC Commodities Division. This is a source-controlled, critical application item that must be manufactured and tested according to a Boeing Rights Guard License Agreement 01 restricted technical data package. Due to these restrictions, acquisition is limited to specified approved sources, including The Boeing Company, LTA/D-CEMCO Inc, Schatz Bearing Corporation, SKF USA Inc, and Fortner Eng. & Mfg. Inc. Delivery is required within 86 days, with FOB and inspection/acceptance points set at the origin. The contract imposes strict domestic sourcing requirements per DFARS 252.225-7016, mandating that bearings be manufactured in the United States, its outlying areas, or Canada, with at least 50 percent of the component cost originating from these regions. Offerors must provide a signed Contractor's Declaration regarding the domestic or foreign nature of the materials. Quality compliance is mandatory, requiring manufacturers to adhere to ISO 9001:2015 standards and follow MIL-DTL-197M for preservation, packaging, and marking. Additionally, the contract requires a CMMC Level 2 self-assessment and adherence to specific cybersecurity and data non-disclosure conditions.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days

AI Contract Overview

This procurement involves the supply of 827 units of a linear-rotary roller (NSN 3120001828574) intended for delivery to the DLA Distribution San Joaquin within 115 days after award. The contract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside program, with the NAICS code 332991 indicating the manufacturing sector involved. The solicitation, numbered SPE4A626T6287, was posted on October 26, 2025, and responses are due by November 3, 2025. The procurement process is conducted via a Request for Quotation (RFQ), which is accessible electronically through the provided link, with no hard copies, specifications, plans, or drawings available for review. The approved source for this item is identified as 11245 378P35-3. All responsible small business entities are encouraged to submit quotes, which will be considered if received timely. Questions regarding the solicitation should be directed via email to the designated contact at DLA Aviation, located in Richmond, Virginia.

General Info

Agency

Department Of Defense → DLA Aviation

NAICS

332991 - Ball and Roller Bearing Manufacturing

Place of Performance

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 26

Combined Synopsis

Response DeadlineNov 3

Deadline has passed

Submission Closed

11/03/2025, 12:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Aviation

Contacts1 person available

OfficeRICHMOND, VA, 23237, USA

Organization / AgencyDepartment Of Defense → DLA Aviation

Office AddressRICHMOND, VA, 23237, USA

Contacts

contact@example.gov

Full Description

Proposed procurement for NSN 3120001828574 ROLLER,LINEAR-ROTAR: Line 0001 Qty 827 UI EA Deliver To: W1A8 DLA DIST SAN JOAQUIN By: 0115 DAYS ADO Approved source is 11245 378P35-3. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.