38--Purchase Order VA786-16-P-1071 Dumpers Mountain Home Wacker Neuson 3001 Wheeled Dumper

Combined Synopsis/Solicitation For Dumpers THIS IS A COMBINED SYNOPSIS/SOLICITATION FOR COMMERCAIL SUPPLIES AND PREPARED IN ACCORDANCE WITH THE FORMAT IN FAR SUBPART 12.6 STREAMLINED PROCEDURES FOR EVALUATION AND SOLICITATION FOR COMMERCIAL ITEMS-AS SUPPLEMENTED WITH ADDITIONAL INFORMATION INCLUDED IN THIS NOTICE. THIS ANNOUNCEMENT CONSTITUTES THE ONLY SOLICITATION; QUOTES ARE BEING REQUESTED AND A SEPARATE SOLICITATION DOCUMENT WILL NOT BE ISSUED. THE SOLICITATION IS BEING ISSUED USING SIMPLIFIED ACQUISITION PROCEDURES. SOLICITATION VA786-16-Q-0504 IS BEING ISSUED AS A REQUEST FOR QUOTE (RFQ). THIS NOTICE AND THE INCORPORATED PROVISIONS AND CLAUSES ARE THOSE IN EFFECT THROUGH THE FEDERAL ACQUISITION REGULATIONS (FAR). ALL RESPONSIBLE SOURCES MAY SUBMIT A QUOTE. FAR clauses and provisions enclosed within this RFQ are those in effect through Federal Acquisition Circular (FAC) 2005-89 and are available in full text through Internet access at http://www.acquisition.gov/far. 1. This is a 100% Service Disabled Veteran Owned Small Business (SDVOSB), Open Market procurement. North American Industry Classification System (NAICS) code is 333131 - Construction Machinery Manufacturing and the size standard is 500 Employees. Any firm that does not meet the capability and size standard under this NAICS code should not submit a response. Prospective awardees MUST be registered with the System for Award Management (SAM )at http://www.sam.gov , PRIOR TO AWARD and through final payment, and must complete the Online Representations and Certifications Application (ORCA) at http://www.sam.gov prior to award and through final payment. CONTRACT WILL NOT BE AWARDED UNTIL SAM REGISTRATION HAS BEEN COMPLETED. *NOTE* SDVOSBs must be verified for ownership and control and listed in the Vendor Information Pages at https://www.vip.vetbiz.gov when offers are submitted and at the time of award. (See Clause 852.219-10 VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside.) Offers received from concerns that are not Service-disabled Veteran-owned Small Business (SDVOSB) concerns shall not be considered and will not be evaluated. 2. This combined synopsis/solicitation for commercial items is in accordance with Federal Acquisition Regulation (FAR) Part 12, Acquisition of Commercial Items and FAR Part 13, Simplified Acquisition Procedures. Therefore, all quotations received prior to the RFQ close date will be considered by the Contracting Office. A single award will be made to the Lowest Price Technically Acceptable (LPTA) offeror. The Contractor shall deliver the following items to the cemetery address above, FOB Destination. Delivery shall be completed within thirty(30) calendar days ARO, to the following addresses: Puerto Rico National Cemetery 50 Avenue Cementerio Nacional Bayamon, Puerto Rico 00961 Baltimore National Cemetery 5501 Frederick Avenue Baltimore, MD 21228 Chattanooga National Cemetery 1200 Bailey Avenue Chattanooga, TN 37404 Long Island National Cemetery 2040 Wellwood Avenue Farmingdale, NY 11735 Riverside National Cemetery 22495 Van Buren Blvd. Riverside, CA 92518 Mountain Home National Cemetery 53 Memorial Avenue, Bldg. 117 Mountain Home, TN 37684 Lebanon National Cemetery 20 Highway 208 Lebanon, KY 40033 The schedule price shall be all-inclusive, including all labor, equipment, materials, and supplies to complete the Contract Line Item (CLIN(s)) CLIN ITEM SALIENT / PERFORMANCE CHARACTERISTICS QTY UNIT 0001 Dumper (Brand-name or Equal to 3001 Wacker Neuson) a. Must have 3-metric ton payload capacity b. Must be four wheel drive c. Must have turf tires d. Authorized service provider near site e. Must be hydraulic power swivel bucket Delivery to: Puerto Rico National Cemetery 50 Avenue Cementerio Nacional Bayamon, Puerto Rico 00961 2 EA 0002 Dumper (Brand-name or Equal to 2001 Wacker Neuson) a. Tier IV swivel b. Payload 6,614lb c. Motor Type 403f-15T d. Engine HP 36 Hp e. Displacement 91.3 in f. Articulation angle 36 deg g. Pendulum angle 15 deg h. Turning radius 151.6in i. LxWxH Rops 166.9 x 70.3 x 105.1in j. Flow Rate 33 usg k. To include heated enclosed cab Delivery to: Long Island National Cemetery Farmingdale NY 11735 Special Shipping Instructions: Please contact cemetery prior to delivery with ETA. No loading dock available POINT(S) OF CONTACT: VA Program Manager: Name: Craig Arsell / Paul White Address: 2040 Wellwood Avenue, Farmindale, NY 11735 Voice: +1 (555) 000-0000 Email: contact@example.gov & contact@example.gov 1 EA 0003 Dumper (Brand-name or Equal to 3001 Wacker Neuson Wheeled Dumper with Cab) a. Require safe payload of 6,614 lbs. b. Required length / width / height (top of ROPS) - 13' 7" / 5' 10" / 8' 9" c. Require power swivel bucket that rotates 90 degrees left and right / full tip bucket clearance - 3' 4" d. Soil capacity - 1.7 yard 3 struck / 2.3 yard 3 heaped / 1.2 yard 3 water level e. Require Safety bar (ROPS ) f. Require Articulated steering g. Require Reverse alarm h. Require Water cooled diesel engine / 3 cylinders i. Maximum rated power - 36.3 HP / rated speed 3,000 RPM j. Maximum operating power - 32.7 HP / operating speed 2,800 RPM k. Require Adjustable driver seat l. Require heated cab with fan & defroster vents & mirrors m. Require 2 cabin doors n. Require permanent 4 wheel drive o. Require hydrostatic automotive drive & hydrostatic working brake p. Require turf tires Delivery to: Baltimore National Cemetery 5501 Frederick Avenue Baltimore, MD 21228 1 EA 0004 Dumper (Brand-name or Equal to Wacker Neuson DW60 Wheeled Dumper) a. Articulating 4 Wheel Drive Site Dumper with Cab minimum 13,000lb payload with the following: b. Payload: 13,000lbs c. Maximum Empty Weight 11,200lbs d. Minimum Skip Capacity heaped: 832 Gallons e. Skip must swivel and dump 180 degrees f. g. Tires: Pneumatic Turf Tires h. Engine: Tier 4 Diesel Engine i. Transmission: 4WD Hydrostatic j. Steering: Articulating k. Gradeability: 50% l. Travel speed Minimum: 15 MPH m. Vehicle width may not exceed 71 in n. ROPS Cab with Doors, Windshield wipers, mirrors, Heat, Defrost and Air Conditioning o. 2 year factory warranty Delivery to: Chattanooga National Cemetery 1200 Bailey Avenue Chattanooga, TN 37404 1 EA 0005 Dumper (Brand-name or Equal to 3001 Wacker Neuson Wheeled Dumper) a. Tier IV b. Operating data c. Payload 6,613.8 lb d. Net weight 5,313.09 lb e. Shipping weight ROPS 5,668.03 lb f. Shipping weight Cabin 5,886.28 lb g. Skip capacity - water 301.6 US gal h. Skip capacity - struck 1.7 yd³ i. Skip capacity - heaped 2.3 yd³ j. Engine / Motor k. Engine / Motor manufacturer Perkins l. Engine / Motor type 403F-15T m. Engine / Motor Diesel n. Engine performance 36.2 hp o. Displacement 91.3 in³ p. Travel speed 13.6 mph q. Articulation angle 36 ° r. Pendulum angle 15 ° s. Turning radius 153.5 in t. Gradeability 50 % u. L x W x H 157 x 70 x 105 in Delivery to: Lebanon National Cemetery 20 Highway 208 Lebanon, KY 40033 1 EA 0006 Dumper (Brand-name or Equal to 3001 Wacker Neuson Wheeled Dumper with CAB and Heat) a. A 3 METRIC TON PAYLOAD b. 4 WHEEL DRIVE c. ARTICULATING STEERING d. SWIVEL BUCKET FROM 90 DEGREE LEFT OR RICHT OF CENTER e. DUMPING AT ALL LOCATIONS. 32.7 HP DIESEL f. CAPACITY 6,614 LB PAYLOAD g. BUCKET 1.7 CU YRD STRUCK, HEAPED 2.3 CU YRD WATER LEVEL 1.2 CU YRD. 5' 10" WIDE h. DRIVE SPEED VARIABLE UP TO 13.7 MPH i. WEIGHT 5,578, 2 YEAR WARRANTY j. NATIONWIDE PRODUCT SUPPORT k. Turf tires Delivery to: Riverside National Cemetery 22495 Van Buren Blvd Riverside, CA 92518 1 EA 0007 Dumper (Brand-name or Equal to 3001 Wacker Neuson Wheeled Dumper with CAB and Heat) a. A 3 METRIC TON PAYLOAD b. 4 WHEEL DRIVE c. ARTICULATING STEERING d. SWIVEL BUCKET FROM 90 DEGREE LEFT OR RICHT OF CENTER e. DUMPING AT ALL LOCATIONS. 32.7 HP DIESEL f. CAPACITY 6,614 LB PAYLOAD g. BUCKET 1.7 CU YRD STRUCK h. HEAPED 2.3 CU YRD WATER LEVEL 1.2 CU YRD. 5' 10" WIDE i. DRIVE SPEED VARIABLE UP TO 13.7 MPH j. WEIGHT 5,578 k. 2 YEAR WARRANTY l. NATIONWIDE PRODUCT SUPPORT m. Turf tires n. Tier IV o. Mirror Set R&L for Cab Delivery to: Mountain Home National Cemetery 52 Memorial Avenue Bldg. 117 Mountain Home, TN 37684 2 EA 3. The following Provisions and Clauses apply to this procurement: a). The provision at 52.212-1, Instructions to Offerors -- Commercial, applies to this acquisition. Quotes are due on September 21, 2016 2:00 PM EST IT IS THE CONTRACTOR'S RESPONSIBILITY FOR ENSURING PROPER SUBMISSION OF THEIR QUOTES IN THE VENDOR PORTAL. PROCEDURES FOR UPDATING ALREADY SUBMITTED QUOTES ARE PROVIDED IN THE VENDOR PORTAL GUIDE. Please go the VA eCMS Vendor Portal website at https://www.vendorportal.ecms.va.gov to register. Once on the webpage, proceed to the Vendor Portal Login section located on the far left side of the webpage and click on 'Request a user account' to register. In the event an Offeror is unable to submit their quotes through the Vendor Portal domain, prior to the deadline for submission of quotes, contact the VAAS helpdesk at +1 (555) 000-0000, or via email at contact@example.gov. Quotes transmission/successful uploads must be completed by the deadline for submission of Quotes. ATTACHMENT A-Vendor eCMS Portal Guide. Offerors unable to submit their quotes through VA eCMS Vendor Portal, may submit their quotes via email, PROVIDED THE VA eCMS Vendor Portal registration requirements have been fulfilled AND Offerors have contacted the VAAS helpdesk for assistance in their quotes submission. A copy of the email correspondence with the VAAS helpdesk shall be forwarded to the Contract Specialist, Antionette Collins-Somerville, at contact@example.gov as proof of email correspondence. If a request for assistance with the VAAS helpdesk proves unsuccessful in an Offeror's ability to submit a quotes prior to the closing date, via the Vendor Portal, the Offeror shall submit to the Contracting Officer correspondence that contains the date, time, and name of helpdesk representative the Offeror contacted to include the reasons why the Offeror could not submit a quotes via the Portal. The offeror shall receive approval from the contracting officer prior to submitting quotes via email. This document shall be submitted with the Offeror's quotes. In the event an Offeror has not requested submission assistance from the VAAS help desk prior to the closing date, nor has submitted correspondence that identifies reasons why the Offeror could not submit their quotes via Vendor Portal, the Offeror will be considered non responsive and the quotes, if late, will not be accepted. Quote shall include the information listed below. Quotes that fail to furnish the required information, or reject the terms and conditions of the RFQ may be excluded from further consideration. The following factors will be considered when evaluating the quotes: Technical and Price. The Offeror's proposal shall consist of three (3) volumes. The Volumes are I -Technical-Literature Review, Volume II - Price, and Volume III - Certifications & Representations. 2. RFQ FILES. Offerors' quotations shall be submitted in accordance with the following instructions: a. Format. The submission shall be clearly indexed and logically assembled. Each volume shall be clearly identified and shall begin at the top of a page. All pages of each volume shall be appropriately numbered and identified by the complete company name, date and solicitation number in the header and/or footer. Quotation page limitations are not applicable to this procurement. All files will be submitted as either a Microsoft Excel (.XLS) file or an Acrobat (PDF) file or compatible as indicated in the table. Page size shall be no greater than 8 1/2" x 11" with printing on one side, only. The top, bottom, left and right margins shall be a minimum of one inch (1") each. Font size shall be no smaller than 12-point. Arial or Times New Roman fonts are recommended. Characters shall be set at no less than normal spacing and 100% scale. Tables and illustrations may use a reduced font size not less than 8-point and may be landscape. Line spacing shall be set at no less than single space. Each paragraph shall be separated by at least one blank line. Page numbers, company logos, and headers and footers may be within the page margins ONLY, and are not bound by the 12-point font requirement. Footnotes to text shall not be used. All proprietary information shall be clearly and properly marked. Pages in violation of these instructions, either by exceeding the margin, font or spacing restrictions will not be evaluated. a. File Packaging. All of the proposal files may be compressed (zipped) into one file entitled "proposal.zip" using WinZip version 6.2 or later version or the proposal files may be submitted individually. b. Content Requirements. All information shall be confined to the appropriate file. The Offeror shall confine submissions to essential matters, sufficient to define the proposal and provide an adequate basis for evaluation. Offerors are responsible for including sufficient details, in a concise manner, to permit a complete and accurate evaluation of each proposal. The titles and page limits requirements for each file are shown in the Table below: Volume Number Factor File Name Page Limitations* Volume I Technical: Literature Review (Company Name) Tech.pdf 50 Volume II Price (Company Name) Price.xls None Volume III Offer & Award Documents, Certifications & Representations (Company Name) OfrRep.pdf None A Table of Contents and/or a glossary of abbreviations or acronyms will not be included in the page count of the technical Volume. However, be advised that any and all information contained within any Table of Contents and/or glossary of abbreviations or acronyms submitted with an Offeror's quote will not be evaluated by the Government. VOLUME I- TECHNICAL Offerors shall propose a detailed approach that addresses the following: Offerors shall provide provide a written document on meeting the requirements presented in the Product Description, including any innovative processes and/or procedures. Descriptive Literature The offeror shall provide descriptive literature (see definition below) and performance requirements of each product. Descriptive literature must be identified and highlighted to show the appropriate model and type and all component items for functions offered and clearly show that the item(s) offered are in compliance with the salient characteristics. The offeror may supplement the descriptive literature with a written technical document if the literature does not sufficiently demonstrate product compliance with the requirements. "Descriptive Literature," as used in this RFQ, means information (including, but not limited to, cuts, illustrations, drawings, service manuals, and brochures) that is submitted as part of an quotation. Descriptive literature is required to verify, for the purpose of evaluation and establishment, details of the product offered that are specified in the salient characteristics. To be technically acceptable, descriptive literature (1) shall be identified and highlighted to show the item(s) of the offer to which it applies and (2) shall show the appropriate model and type and all component items for functions offered (if applicable) and (3) shall demonstrate that all quoted products are in compliance with all of the salient characteristics. This descriptive literature must be received by the Government by the time specified in this RFQ for receipt of quotations. VOLUME II - PRICE The Price Quote does not have a page limitation; however, Contractor's quotes shall provide detailed information that provides a list of price. The contractor's price quote must be separated from the technical submittal. The contractor shall propose firm fixed price. The quotes that fail to furnish the required information, or reject the terms and conditions of the RFQ may be excluded from further consideration. VOLUME III - OFFER AND AWARD DOCUMENTS AND CERTIFICATIONS/REPRESENTATIONS Certifications and Representations - An Acrobat PDF file shall be created to capture the signatures for submission. This Volume shall contain the following: o Legal Business/Company Name (as it is indicated in www.sam.gov) o DUNS Number o Point of Contact Name o Telephone number o E-Mail Address Acknowledgement of Amendments, if any. Any proposed exceptions to solicitation terms and conditions Offerors are hereby advised that any Offeror-imposed terms and conditions which deviate from the Government's material terms and conditions established, may render the Offeror's quote Unacceptable, and thus ineligible for award. b). The provision at 52.212-2, Evaluation -- Commercial Items. The Government will award a contract resulting from this solicitation to the responsible offeror whose offer conforming to the solicitation will be most advantageous to the Government, price and other factors considered. The following factors shall be used to evaluate offers based on (LPTA) Lowest Priced Technically Acceptable. Quotes will be evaluated based on the following factors listed as shown below: All quotes shall be subject to evaluation by Government personnel. The Government reserves the right to award without discussions based upon the initial evaluation of quotes. The proposal will be evaluated strictly in accordance with its written content. Proposals which merely restate the requirement or state that the requirement will be met, without providing supporting rationale, are not sufficient. Award will be made to Offeror whose price for items are lowest among all quotes that were deemed to be technically acceptable. Offerors who fail to meet the technical requirements of the solicitation will be rated Unacceptable and thus, ineligible for award. 1. TECHNICAL EVALUATION APPROACH. The evaluation process will consider whether the quote demonstrates a clear understanding of the technical features involved in meeting the requirements and whether the Offeror's methods and approach have adequately and completely considered, defined and satisfied the requirements. Descriptive literature (and supplemental technical proposals, if deemed necessary by offeror to supplement the descriptive literature) will be evaluated to determine whether the quoted items meet all of the technical requirements (described below) and are thus considered technically acceptable. Any quoted product that does not meet all of the salient characteristics will be deemed technically unacceptable, and thus ineligible for award. 2. PRICE EVALUATION APPROACH. Proposed pricing shall be provided on a unit price line basis in the Price and Schedule section. The Government will evaluate offers by adding the total of all line item prices. Evaluation Process: A Responsibility Determination will be made in accordance with FAR 9.1 Responsible Prospective Contractors. The Government will make use of several data bases to aid in establishing a more complete picture of responsibility and ability the databases include, but are not limited to Experian, PPIRS, EPLS, VetBiz and SBA. Clauses: SBA ACT 8(D)(13)(B); DIGNITY STANDARDS ; FAR 52.212-4, Contract Terms and Conditions (MAY 2015) applies to this acquisition. Addendum to The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items (OCT 2015) applies to this acquisition. Under paragraph b, the following clauses are incorporated: 52.203-99, Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements (DEVIATION) (FEB 2015) PROVISIONS AND CLAUSES: CLAUSES INCORPORATED BY REFERENCE: 52.252-2 Clauses Incorporated by Reference;52.203-3, Gratuities (APR 1984); 52.203-17, Contractor Employee Whistleblower Rights and Requirement to Inform Employees of Whistle Blower Rights (APR 2014); 52.204-4, Printed of Copied Double-Sided on Recycled Paper (MAY 2011); 52.204-18, Commercial and Government Entity Code Maintenance (JUL 2015); 52.211-17 Delivery of Excess Quantities (SEP 1989); 52.223-2, Affirmative Procurement of Biobased Products Under Service and Construction Contracts (SEP 2013); 52.246-1 Contractor Inspection Requirements (APR 1984); 52.247-34, F.O.B. Destination (DEC 2013); 52.246-16 Responsibility For Supplies (APR 1984); Limitations on Subcontracting-Monitoring and Compliance (JUN 2011) http://www.acquisition.gov/far/index.html http://www.va.gov/oamm/oa/ars/policyreg/vaar/index.cfm Solicitation Provisions: 52.212-1, Instructions to Offerors- Commercial Items (OCT 2015); 52.203-98, Prohibition On Contracting With Entities That Require Certain Internal Confidentiality Agreements-Representation (Deviation ) (FEB 2015); 52.209-5, Certification Regarding Responsibility Matters (OCT 2015); 52.209-5, Representation By Corporations Regarding An Unpaid Tax Liability Or Felony Conviction Under Any Federal Law (DEVIATION) (MAR 2012); 52.209-7, Information Regarding Responsibility Matters (JUL 2013); 52.216-1 Type Of Contract (APR 1984); 52.233-2, Service of Protest (Sep 2006); 52.237-1 Site Visit (APR 1984); 52.233-2, Service of Protest (JAN 2008). 52.212-2, Evaluation-Commercial Items (OCT 2014); 52.212-3, Offeror Representations and Certifications-Commercial Items (OCT 2015); PROVISIONS AND CLAUSES: SOLICITATION PROVISION INCORPORATED BY REFERENCE: 52.252-1 Solicitation Provisions Incorporated by Reference; 52.204-7, System for Award Management (JUL 2013); 52.204-16, Commercial and Government Entity Code Reporting (JUL 2015); 52.204-17, Ownership Or Control Of Offeror (NOV 2014); 52.211-6, Brand Name or Equal (AUG 1999); 52.223-1, Biobased Product Certification (MAY 2012); 52.225-25, Prohibition on Contracting With Entities Engaging in Certain Activities Or Transactions Relating to IRAN-Representation and Certifications (OCT 2015). VAAR: The VAAR Clauses applicable to this acquisition are 852.203-70, Commercial Advertising (JAN 2008), 852.203-71, Display of Department of Veterans Affairs Hotline Poster (DEC 1992); 852.211-73 Brand Name or Equal (JAN 2008); 852.211-75, Product Specifications (JAN 2008); 852.219-10, VA Notice of Total Service-Disabled Veteran-Owned Small Business Set-Aside (DEC 2009); 852.228-70, Bond Premium Adjustment (JAN 2008); 853.232-72 Electronic Submission Of Payment Request (NOV 2012); 852.233-71 Alternate protest procedure (JAN 1998); 852.246-71, Inspection (JAN 2008); 852.270-1, Representatives of Contracting Officers (JAN 2008). Information concerning clauses and provision incorporated by reference may be obtained at http://farsite.hill.af.mil. ALL QUESTIONS SHALL BE DIRECTED TO THE CONTRACT SPECIALIST ONLY! Interested offerors must submit any questions concerning the solicitation at the earliest time possible to enable the Buyer to respond. Questions must be submitted via email to Antionette Collins-Somerville at contact@example.gov. All questions must be received by no later than September 19, 2016 at 1:00PM E.S.T. to give reasonable time to respond to questions prior to close of the solicitation. No questions will be accepted after September 19, 2015 at 1:00pm E.S.T. The solicitation closes on September 21, 2016 at 2:00PM EST.