This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on September 15, 2009. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

38--Hydrostatic Steel Wheel Road Roller for Camp Shelby Joint Forces Training Center, Department of Public Works for work on all paved roads and parking lots.

Awarded

W9127Q-09-T-0048Federal

Submission Closed09/23/2009, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8EE-27-T-0379

Solicitation SPE8EE-27-T-0379 is a Request for Quotations issued by the Department of Defense, specifically DLA Troop Support Construction and Equipment Manu and Con, for the procurement of cable reels under NSN 3895-01-513-6582. The requirement consists of two line items totaling five units, with two units destined for DLA Distribution Barstow in California and three units for DLA Distribution Albany in Georgia. The delivery timeframe is specified as 66 days after order, with original required delivery dates set for February 27, 2027, and specific need ship dates ranging from October 2026 to April 2027. Terms are established as FOB Origin, with inspection and acceptance occurring at the destination. The procurement is not a small business set-aside and falls under NAICS code 333120. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over the general packaging standard ASTM D3951. Additional requirements include marking and labeling per MIL-STD-129 and palletization according to RP001. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, safeguarding covered defense information, and the prohibition of covered defense telecommunications equipment. All quotes must be submitted via the DLA Internet Bid Board System.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Truck-Mounted SpreadersThis subcontract agreement involves the procurement and delivery of truck-mounted spreaders intended for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work specifically covers equipment used for the application of seal coatings, aggregates, and ice control materials, falling under Commodity Code 76566 and NAICS code 333120. The contract is managed by the state of New Mexico, with a posting date of October 29, 2026, and a response deadline set for November 27, 2026. The primary objective is the successful delivery of completed spreading equipment to support state transportation infrastructure and maintenance efforts.

POSTED

DEADLINE

Supply of Vehicle-Mounted Snow Plows and Snow WingsThis subcontract agreement involves the procurement and delivery of vehicle-mounted snow plows and snow wings for prime contractors working on New Mexico Department of Transportation vehicle procurement projects. The scope of work is specifically focused on equipment categorized under Commodity Code 76561, falling under NAICS code 333120. The opportunity was posted on October 29, 2026, with a response deadline set for November 27, 2026. Managed by the state of New Mexico, the contract ensures that necessary snow removal equipment is supplied to support transportation infrastructure projects across the region.

POSTED

DEADLINE

5P207-260743 – Aerial Lift

Solicitation # WS5920009719

Public Works and Government Services Canada, acting on behalf of Parks Canada, is soliciting proposals for the acquisition and delivery of an aerial lift to be located in Chambly, Quebec. This federal procurement opportunity is governed by the Canadian Free Trade Agreement and is categorized under NAICS code 333120. Interested parties must submit their responses by the deadline of November 9, 2026. The solicitation, identified by number WS5920009719, is managed by the Department of Public Works and Government Services, with Stephen Phan serving as the primary contracting authority.

Department of Public Works and Government Services

POSTED

DEADLINE

Supply of Moldboard End BitsThis subcontract involves the supply of 46 moldboard end bits for prime contractors supporting Department of Defense hardware procurement projects through the Defense Logistics Agency. The selected provider is responsible for manufacturing or sourcing parts that strictly adhere to the technical specifications for NSN 3805013455968, with delivery coordinated via the First Destination Transportation program to a government destination in Texarkana, Texas. To be eligible for this requirement, contractors must possess a valid CAGE code and Unique Entity Identifier. The project falls under NAICS code 333120, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

RETRACTOR ASSEMBLY, WEA

Solicitation # SPE8EF-27-T-0173

Solicitation SPE8EF-27-T-0173 is a fixed-price request for quotations issued by the Defense Logistics Agency for the procurement of 119 units of Retractor Assembly, Weapon Cradle Adapter, identified by NSN 1740-01-140-7583. This is a critical application item that must adhere to specific source control drawings, requiring offerors not listed as approved sources to obtain OEM approval. The contract specifies a delivery period of 145 days, with a need ship date of April 4, 2027, and an original required delivery date of October 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement incorporates stringent technical and quality standards, including the DLA Master List of Technical and Quality Requirements, which takes precedence over ASTM D3951 packaging standards. All shipments must be marked and labeled according to MIL-STD-129 and palletized per RP001. Compliance requirements include CMMC Level 2 Self-Assessment, NIST SP 800-171 DoD assessment requirements, and adherence to the Buy American Act and Berry Amendment. Administrative processing, including invoicing and receiving reports, must be conducted through the Wide Area WorkFlow system. This solicitation is not a small business set-aside.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

MOIL POINT, PAVING BREA

Solicitation # SPE8EE-27-T-0362

Solicitation SPE8EE-27-T-0362 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manu and Con for the procurement of one Moil Point, Paving Breaker, identified by NSN 3820-01-657-7467. The requirement is for a quantity of one unit with a delivery timeframe of 20 days after award and an original required delivery date of October 23, 2026. Shipping is established as FOB Origin, with the freight shipping address located at Camp Gruber in Braggs, Oklahoma. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-1. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List technical and quality requirements taking precedence. Palletization must comply with RP001. Invoicing and payment processing are required through the Wide Area WorkFlow system. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting requirements, and prohibitions on covered defense telecommunications equipment. Notably, the government will not evaluate or award to offers utilizing additive manufacturing processes, and a price evaluation preference may be applied to HUBZone concerns.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0181

Solicitation SPE8EF-27-T-0181 is a request for the procurement of two Rear Panel Assemblies, identified by NSN 1740-01-498-6196 and Pacific Consolidated Industries part number 791592-001. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement is categorized under NAICS code 333120. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a need ship date of April 26, 2027, and an original required delivery date of May 27, 2027. The delivery timeline is specified as 167 days after receipt of order, with shipping terms set as FOB Origin. The contract mandates strict adherence to DLA Master List technical and quality requirements, which take precedence over ASTM D3951. Packaging must comply with RP001 and MIL-STD-129 for marking and labeling. Inspection and acceptance will occur at the destination. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotations must be submitted via the DIBBS portal by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0296

Solicitation SPE8EE-27-T-0296 is issued by the Defense Logistics Agency for the procurement of 46 units of moldboard end bits, identified by NSN 3805-01-345-5968. The contract is managed by the Department of Defense under NAICS code 333120 and utilizes First Destination Transportation to reduce costs via Government-Arranged Transportation. Delivery is required within 167 days after receipt of order, with a designated delivery point at DLA Distribution Red River in Texarkana, Texas. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and the use of manufacturer corrosive resistant paint for preservation. Technical requirements are further governed by the DLA Master List of Technical and Quality Requirements. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the DLA Troop Support office in Philadelphia.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

TOWBAR, TRAILER, MUNI

Solicitation # SPE8EF-27-T-0205

Solicitation SPE8EF-27-T-0205 is a request for the procurement of 22 units of munitions trailer towbars, identified by NSN 1740002548482. Issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, the requirement specifies a delivery timeframe of 167 days after order, with an original required delivery date of April 15, 2027. The contract is established as FOB Origin, with both inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with the DLA Master List of Technical and Quality Requirements taking precedence. Palletization must comply with RP001. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and registration in the System for Award Management. Key regulatory clauses are incorporated, including the Buy American and Balance of Payments Program, DFARS 252.204-7012 for safeguarding covered defense information, and various socioeconomic representations. All quotations must be submitted through the DLA Internet Bid Board System by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0182

Solicitation SPE8EF-27-T-0182 is a request for quotations issued by DLA Troop Support, Construction and Equipment Manufacturing and Construction, for the procurement of 10 units of Filter Assembly, identified by NSN 1740-01-498-6164 and part number 791551-001. The requirement is categorized under NAICS code 333120. The need ship date is April 26, 2027, with an original required delivery date of May 8, 2027, and a delivery timeframe of 167 days after order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging following ASTM D3951 and palletization complying with RP001. Marking and labeling must align with MIL-STD-129. Key regulatory clauses include DFARS 252.204-7012 for safeguarding covered defense information and cyber incident reporting, as well as the Buy American Act and Berry Amendment for domestic material preferences. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Quotations are due by November 9, 2026, to the issuing office in Philadelphia, Pennsylvania.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Vacant Building DemolitionThis subcontract opportunity involves the complete demolition of a vacant building located at 25 High Road in Newbury, Massachusetts. The selected contractor will be responsible for tearing down the structure and clearing all demolition debris from the site using heavy machinery, such as loaders and excavators with shears, to deliver a fully cleared lot. Eligible bidders must possess a qualified Massachusetts contractor license for demolition services. The project is associated with the Town of Newbury, and interested parties must submit their responses by November 12, 2026.

Town of Newbury

POSTED

2 days ago

DEADLINE

in 13 days

AI Contract Overview

Solicitation W9127Q-09-T-0048 is a request for quotes for one hydrostatic steel wheel road roller to be used by the Department of Public Works at Camp Shelby Joint Forces Training Center for the maintenance of paved roads and parking lots. The required equipment must feature a liquid-cooled diesel engine, a water tank capacity between 20.6 and 50 US gallons, and specific weight and dimension parameters, including a dry weight of 5,000 to 8,000 pounds and a drum diameter of 24 to 48 inches. This opportunity is a 100 percent small business set-aside under NAICS code 333120 and will result in a firm fixed-price contract. Eligible bidders must be registered in the Central Contractor Registration system. Proposals are due by 4:30 P.M. CDT on September 23, 2009, and should be submitted to the contracting office in Flowood, Mississippi. Delivery of the equipment is required at Camp Shelby, Mississippi.

General Info

Agency

Department Of Defense → W7NH Uspfo Activity Ms Arng

Contract Value

$30,277

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

Camp Shelby Joint Forces Training Center 1001 Lee Avenue Camp Shelby MS 39407-5500 US, MS, USA

Set-Aside

SBA

Awardee

STRIBLING EQUIPMENT, LLC

Award Issued Date

09/24/2009, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedSep 15

Combined Synopsis

AwardedSep 24

Contract was awarded

Submission Closed

09/23/2009, 05:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7NH Uspfo Activity Ms Arng

ContactsNo contacts available

OfficeFLOWOOD, MS, 39232-8861, USA

Organization / AgencyDepartment Of Defense → W7NH Uspfo Activity Ms Arng

Office AddressFLOWOOD, MS, 39232-8861, USA

ContactsNo contact information available

Full Description

This solicitation number W9127Q-09-T-0048 is issued as a Request for Quotes for one (1) Hydrostatic Steel Wheel Road Roller for Camp Shelby Joint Forces Training Center, Department of Public Works for work on all paved roads and parking lots. General specifications areas follows: Dry weight minimum 5000 pounds, maximum 8000 pounds; Operating weight minimum 6000 pounds, maximum 10,000 pounds; Drum diameter minimum 24.0 inches, maximum 48 inches; Drum width, minimum 36.0 inches, maximum 60 inches; Curb clearance 18-24 inches; Side Clearance 2-6 inches; Water tank capacity 20.6 - 50 US Gallon; Engine type liquid cooled, diesel. This solicitation is prepared in accordance with the format in subpart 12.6, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a written solicitation will not be issued. The solicitation and incorporated provisions and clauses are in effect through Federal Acquisition circular 2005-36. This solicitation is 100% small business set aside and is restricted to small businesses only in accordance with FAR 19.502-2(b). NAICS for determination of size status is 333120; Small Business Standard in number of employees is 750. Place of delivery is Camp Shelby Joint Forces Training Center, Attn: SFC Angie Packnett, 1001 Lee Avenue, Camp Shelby, MS 39407-5500. The following clauses apply: FAR 52.203-3 Gratuities; FAR 52.203-5 Covenant Against Contingent Fees: FAR 52.203-6 Restrictions of Subcontractor Sales to the Government; FAR 52.203-7 Anti-Kickback Procedures; FAR 52.203-15 Whistleblower Protections Under the American Recovery and Reinvestment Act of 2009; FAR 52.204-1 Approval of Contract; FAR 52.204-7 Central Contractor Registration; FAR 52.212-5 Contract Terms and Conditions Required to Implement Statutes of Executive Orders-Commercial Items; FAR 52.225-13 Restrictions on Certain Foreign Purchases; APPLICABLE DFARS CLAUSES: DFAR252.212-7000 Offeror Representations and Certifications-Commercial Items: DFAR 252.225-7000 Buy American Act-Balance of Payments Program Certificate: DFAR 252.225-7001 Buy American Act and Balance of Payments Program; DFAR 252.225-7031 Secondary Arab Boycott of Israel; DFAR 252.212-7001 Contract Terms and Conditions Required To Implement Statutes Or Executive Orders Applicable to Defense Acquisitions or Commercial Items. Full text of these provisions may be accessed on-line at http://www.arnet.goveor http://farsite.hill.af.mil. This announcement is the solicitation which will result in a firm fixed-price contract. Proposals are due no later than 4:30 P.M. CDT September 23,2009 to JFH-MS-J8-PC, Attn: Ms Lynn McWilliams, 144 Military Drive, Flowood, MS 39232-8861. Proposals may be emailed to contact@example.gov or faxed to +1 (555) 000-0000 (email is the preferable method). CCR is a mandatory requirement for all DoD Government contracts. You must be registered in order to be eligible for award of a contract. To register on line go to http://www.aar.gov/. The Contracting Offices web site is located at http://ngms.state.ms.us/uspfo/.