3930--Articulating Boom Lift

THIS REQUEST FOR INFORMATION (RFI)/SOURCES SOUGHT/RFI IS ISSUED SOLELY FOR INFORMATION AND PLANNING PURPOSES ONLY. THIS IS NOT A SOLICITATION. THE SUBMISSION OF PRICING, CAPABILITIES FOR PLANNING PURPOSES, AND OTHER MARKET INFORMATION IS HIGHLY ENCOURAGED AND ALLOWED UNDER THIS RFI IN ACCORDANCE WITH (IAW) FAR 15.201(e). DISCLAIMER This RFI is issued solely for information and planning purposes only and does not constitute a solicitation. All information received in response to this RFI that is marked as proprietary will be handled accordingly. IAW FAR 15.201(e), responses to this notice are not offers and cannot be accepted by the Government to form a binding contract. Responders are solely responsible for all expenses associated with responding to this RFI. SOURCES SOUGHT/RFI DESCRIPTION This is NOT a solicitation announcement. This is a Sources Sought/RFI/RFI only. The purpose of this Sources Sought/RFI/RFI is to gain knowledge of potential qualified sources and their size classification relative to NAICS 333924 (size standard of 900 employees). Responses to this Sources Sought/RFI/RFI will be used by the Government to make appropriate acquisition decisions. After review of the responses to this Sources Sought/RFI, a solicitation announcement may be published. Responses to this Sources Sought/RFI synopsis are not considered adequate responses for a solicitation announcement. The Department of Veterans Affairs (VA), VISN 22 Long Beach Network Contracting Office, is seeking sources who can possibly provide an Articulating Boom Lift that at a minimum meet the brand name and/or can possibly provide an equal product for the Phoenix VA Healthcare System. Located in Phoenix, AZ. Brand name Information: Manufacturer: JLG Industries, Inc. Part Number: Nomenclature: ARTICULATING BOOM LIFT Model Number: 600AJ (Any other information): Equal to product Information: Salient Characteristics: Platform Height 60 ft 7 in. 18.47 m Horizontal Outreach 39 ft 9 in. 12.10 m Up and Over Clearance 26 ft 7 in. 8.1 m Swing 360 Degrees Continuous Platform Capacity 500 lb 227 kg Platform Rotator 180 Degrees Hydraulic Jib Range of Articulation 130 Degrees (+70, 60) Max. Ground Bearing Pressure 600AJ 75 psi 5.25 kg/cm2 Drive Speed 2WD 4.25 mph 6.8 kph Drive Speed 4WD 4.25 mph 6.8 kph Oscillating Axle 180 Degree Hydraulic Platform Rotator 110V-AC Receptacle in the Platform 4 Degree Tilt Alarm/Indicator Light Swing-Out Engine Tray 12V-DC Auxiliary Power Hourmeter Horn Platform Console Machine Status Light Panel* Lifting/Tie Down Lugs All Motion Alarm Load Sensing System Gradeability 2WD 30% Gradeability 4WD 45% Tilt Cut Out 4 Degrees Axle Oscillation 8 in. 0.2 m Turning Radius Inside/Outside 2WS 10 ft. 11 in./17 ft. 7in. 3.33 m/5.36 m 4WS 5 ft. 6 in./11 ft. 8 in. 1.68 m/3.56 m Manufacturer name JLG Industries, Inc. The information identified above is intended to be descriptive, not restrictive and to indicate the quality of the supplies/services that will be satisfactory. It is the responsibility of the interested source to demonstrate to the government that the interested parties can provide the supplies/services that fulfill the required specifications. If you are interested and are capable of providing the sought-out supplies/services, please provide the requested information as well as the information indicated below. Response to this notice should include company name, address, point of contact, size of business pursuant to the following questions: (1) Please indicate the size status and representations of your business, such as but not limited to: Service-Disabled Veteran Owned Small Business (SDVOSB), Veteran Owned Small Business (VOSB), Hubzone, Woman Owned Small Business (WOSB), Large Business, etc.)? (2) Is your company considered small under the NAICS code identified in this RFI? (3) Are you the manufacturer, authorized distributor, and/or can provide equivalent solution to the items being referenced above? If applicable, please provide the manufacturer name and business size. (4) Is the end product manufactured in the United States; and is the cost of the components made in the U.S. at least 60% of the total cost of components required to manufacture the end product? If the item is not manufactured in the U.S., please provide the country of origin. (5) If you are a large business, do you have any designated/authorized distributors? If so, please provide their company name, telephone, point of Contact and size status (if available). (5) If you re a small business and you are an authorized distributor/reseller for the items identified above or an equivalent solution, do you alter; assemble; modify; the items requested in any way? If you do, state how and what is altered; assembled; modified? (6) If you intend to sub contract any work on this contract, what portion of the total cost will be self-performed/will be performed by your organization? Please provide estimated detailed percentage breakdowns related to sub contracted work and completion of job. (7) Does your company have a Federal Supply Schedule (FSS) GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract? If so, please provide the contract number. (8) If you are an FSS GSA/NAC/SAC/BPA/NASA SEWP or any other Federal Government contract holder, are all the items/solution you are providing information for available on your schedule/contract? Please state if all or some items are available on the contract. (9) General pricing of your products/solution is encouraged. Pricing will be used for the purpose of market research only. It will not be used to evaluate for any type of award. (10) Please submit your capabilities statement illustrating your organizations ability to meet the described salient characteristics or equal to items for planning purposes; show clear, compelling and convincing evidence that all equal to items" meet all the salient characteristics. (11) Please review salient characteristics/statement of work (if applicable) and provide feedback or suggestions. If none, please reply as N/A. (12) Please provide your SAM.gov Unique Entity ID/Cage Code number. Responses to this notice shall be submitted via email to contact@example.gov. Telephone responses will not be accepted. Responses must be received no later than 07/12/2023 by 04:00PM PST. All responses to this Sources Sought/RFI will be used for planning purposes only. If a solicitation is issued as a result of the information provided from this RFI, all interested parties must respond to that solicitation separately IAW the specifications of that solicitation announcement. Responses to this Sources Sought/RFI notice is not considered a request to be added to a prospective bidders list or to receive a copy of the solicitation.