This Sources Sought opportunity from Department Of Defense was posted on June 3, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

3D Bioprinter

Closed

N0018924QZ256Federal

Submission Closed06/07/2024, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333248

New

Federal

Electrically Heated Tank

Solicitation # W911S227U0049

Solicitation W911S227U0049 is a Request for Quotation issued by the US Army ATEC for the procurement of new electrically heated tanks and temperature controllers for the U.S. Army Yuma Proving Ground. The primary requirement consists of a 50-gallon electrically heated cylindrical tank with a 40-gallon working capacity, 10 kW heating, and a Type B agitator powered by a 1.5 horsepower motor, designed to heat and melt paraffin wax to 250 degrees Fahrenheit. The government accepts the STA-RW brand (Part Numbers Y50MB, C4X) or an equal product that meets the specified physical and functional characteristics. This is a Total Small Business Set-Aside, and the contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. All quotes must be submitted electronically via the PIEE solicitation module by the specified deadline, and failure to include the mandatory Attachment 1 regarding certifications and country of origin may result in a non-responsive rejection. Delivery is required on an F.O.B. destination basis to the Yuma Proving Ground in Arizona, with a preferred delivery timeframe of 30 days. Offerors providing equal products must include descriptive literature, make or model numbers, and details of any modifications. The procurement is subject to various federal regulations, including the Buy American Act and NEMA 12 enclosure standards for motor starters. Acceptance will be based on visual inspection, dimensional measurements, and manufacturing quality upon delivery.

POSTED

DEADLINE

39--WINCH POWER HOIST UNIT

Solicitation # SPE8EE-27-Q-0033

Solicitation SPE8EE-27-Q-0033 is a Request for Quotation issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manu and Con, for the procurement of two Window Power Hoist Units (NSN 3950-99-989-1264). This is a total small business set-aside under NAICS code 333248. The required delivery date for the items is December 8, 2026, with a delivery timeframe of 176 days after the award. Delivery is designated as FOB Origin under the First Destination Transportation program, with the shipment destined for DLA Distribution in New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The procurement requires strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with specific compliance with RP001 for palletization. Offerors must maintain active registration in the System for Award Management and provide a complete data package if proposing alternate products. Payment and invoicing must be processed electronically through the Wide Area Workflow system. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American and Balance of Payments program compliance, and prohibitions on certain telecommunications equipment. Quotes must be submitted electronically by the deadline of October 26, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

IRA Purchase of Grace Instrument Technologies Automated High Pressure Porosity and Permeability System (M9180) per the attached specifications: 1. Automated High-Pressure Porosity and Permeability Sy…The Department of Energy's Office of Fossil Energy is forecasting the purchase of one Automated High Pressure Porosity and Permeability System (M9180) from Grace Instrument Technologies. This acquisition includes the delivery of the system along with three business days of professional installation and training conducted by qualified personnel at the NETL Pittsburgh Site in Pennsylvania. This procurement is designated as a small business set-aside under NAICS code 333248. Brian Halstead serves as the Small Business Program Manager for this action, which is intended to support technical operations through the integration of specialized high-pressure measurement equipment.

Office of Fossil Energy

POSTED

DEADLINE

Invitation to Quote for the Supply, Delivery, Installation and Commissioning of One (1) Collaborative Dual-Arm Robot System

Solicitation # Doc3361720736

The National University of Singapore is seeking quotations for the supply, delivery, installation, and commissioning of one collaborative dual-arm robot system under solicitation number Doc3361720736. Interested suppliers must submit their proposals electronically through the Sourcing Event portal by the deadline of October 27, 2026. All communications for clarifications must be conducted via Event Messages, and any submissions made through email or other unauthorized channels will result in disqualification. Suppliers are advised to submit their bids early to avoid technical issues and should utilize the resources available on the NUS Supplier Portal for guidance. It is critical to ensure the correct currency is selected at the time of submission, as it cannot be changed later. For system-related troubleshooting, suppliers are directed to contact Ariba support directly.

National University of Singapore

POSTED

DEADLINE

Manufacture and Supply of Grooved Headed Pins (NSN 5315-01-628-1619)This subcontract involves the manufacture and supply of 14 grooved headed pins under NSN 5315-01-628-1619 for the DLA Weapons Support ASC. The production process requires the use of CNC lathes and grinders to meet exact specifications. Completed units must be delivered FOB Origin to DLA Distribution in Cherry Point, North Carolina, with packaging adhering to ASTM D3951, MIL-STD-129, and DLA RP001 standards. To be eligible, the supplier must maintain an ISO 9001:2015 quality system and hold CMMC Level 2 certification. Additionally, the contractor must be certified under the US/Canada Joint Certification Program to ensure full compliance with ITAR and EAR regulations. The opportunity is categorized under NAICS code 333248 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BLADE, SHREDDING MACHIN

Solicitation # SPE8EN-27-T-0135

Solicitation SPE8EN-27-T-0135 is a fixed-price procurement for 22 kits of paper shredding machine blades, identified by NSN 3615-01-479-3879. The requirement is issued by the Department of Defense and is open for full and open competition, with a need ship date of April 12, 2027, and a final required delivery date of May 25, 2027. Delivery is set as FOB Origin, with the destination and inspection point located at DLA Distribution San Diego, California. The procurement adheres to technical data package Rev A Gen 1 and basic drawing 53711, while incorporating DLA master list quality requirements and specific packaging standards under MIL-STD-2073-1E and RP001. The contract emphasizes strict quality assurance, utilizing sampling methods per MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Key regulatory compliance includes the Buy American Act, safeguarding of covered defense information per DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system. Evaluation for award may include a price preference for certified HUBZone small business concerns, and the buy is identified as a potential candidate for automated award.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

PRINTER, THREE-DIMENSIO

Solicitation # SPE8EN-27-T-0171

Solicitation SPE8EN-27-T-0171 is a fixed-price, total small business set-aside contract issued by the Defense Logistics Agency for the procurement of one three-dimensional additive manufacturing printer. The equipment, identified by NSN 3612016959151 and MakerGear part number MG2000MDS, is a portable unit weighing 170 pounds with a build volume of 16 by 14 by 13 inches. It features a 1.75mm filament diameter, supports a wide range of materials including ABS, Nylon, Carbon Fiber, and metal composites, and includes specialized lifting straps for 2 to 4 person transport. The unit operates on 100 to 120 VAC power and is governed by technical drawings 5B5M3 11B5190902. Delivery is required within 167 days, with a need ship date of April 12, 2027, and a final required delivery date of June 12, 2027, to the DLA Distribution New Cumberland facility in Pennsylvania. The contract specifies FOB Origin terms and requires destination inspection. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Administrative compliance includes the use of the Wide Area WorkFlow system for invoicing and adherence to DFARS regulations regarding safeguarding covered defense information, the Buy American Act, and the prohibition of certain telecommunications equipment.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

DEADLINE

CUTTER PER 13052983-102

Solicitation # W519TC26QA225

The Army Contracting Command - Rock Island (ACC-RI) is soliciting a firm fixed price purchase order for the procurement of six cutters in support of the Rock Island Arsenal, Joint Manufacturing and Technology Center (RIA-JMTC). The items must be manufactured according to RIA print 13052983-102. Award will be granted to the responsible offeror providing the lowest total evaluated fair and reasonable priced quote that conforms to the request for quote requirements. The applicable NAICS code for this procurement is 333248. The selected contractor must begin performance within three calendar days and complete delivery within 30 calendar days of the award or notice to proceed. Delivery is FOB Destination to Building 299 in Rock Island, Illinois, with receiving hours limited to Monday through Friday, 6:30 am to 2:00 pm Central Time. A Certificate of Conformance per FAR 52.246-15 is required for quality assurance. Payment will be processed electronically through the Defense Finance and Accounting System via the Wide Area Workflow system. The contract incorporates several regulatory requirements, including safeguarding covered defense information under DFARS 252.204-7012 and the requirement to furnish performance and payment bonds.

POSTED

DEADLINE

Industrial Sewing Machines

Solicitation # W911S227U0036

Solicitation W911S227U0036 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of new industrial sewing machines. This acquisition is designated as a Total Small Business Set-Aside under NAICS code 333248. The primary requirement is for a JUKI Post Bed Sewing machine, part number PLC2710VS70BBZ/SC952, though the solicitation is posted as brand name or equal. To be considered, equal products must meet specific technical performance standards, including a needle bar stroke of 30.7mm to 40mm and maximum sewing speeds ranging from 2,500 to 5,000 sti/min, depending on the model. All equipment must be new, compatible with JUKI replacement parts, run on single pole 120V, and be delivered as a turnkey solution. The contract will be awarded to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is preferred within 30 days on an F.O.B. destination basis. Offerors must submit their quotes through the PIEE Solicitation module and include a completed Attachment 1 regarding certifications and country of origin to avoid being rejected as nonresponsive. Payment will be processed via Wide Area Workflow. Key regulatory requirements include compliance with the Buy American Act, sustainable product standards, and postaward small business program rerepresentation.

POSTED

DEADLINE

Final Assembly and MIL-STD PackagingThis subcontract involves providing final integration and packaging services for prime contractors on DLA Troop Support projects. The scope of work requires the assembly of machined parts and hardware into Cable Roller Assemblies, followed by final quality inspections. The contractor is responsible for delivering eight fully assembled and marked units, ensuring all packaging and marking adhere strictly to MIL-STD-2073-1E and MIL-STD-129 standards. The project is managed under the Department of Defense with performance taking place in Silverdale, Washington. Interested parties must note the response deadline of October 26, 2026. The work falls under NAICS code 333248 and is coordinated through Construction and Equipment Manufacturing and Construction.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EE-27-T-0136

Solicitation SPE8EE-27-T-0136 is issued by the DLA Troop Support Construction and Equipment Manufacturing and Construction office for the procurement of eight cable roller assemblies, identified by NSN 3950-01-573-8098. The requirement is categorized under NAICS code 333248. Delivery is required within 20 days after receipt of order, with the place of performance and delivery located in Silverdale, Washington. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including the removal of government identification from non-accepted supplies and a prohibition on the intentional addition of mercury or mercury-containing compounds. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Invoicing and payment processing are to be handled electronically through the Wide Area WorkFlow system. Compliance with various Federal Acquisition Regulations and Defense Federal Acquisition Regulation Supplement clauses is required, including the Buy American Act, the Berry Amendment, and safeguarding covered defense information. Offerors must submit quotations via the DIBBS portal by October 26, 2026. The award may be processed as an automated award, and the government requires representations regarding small business size status and telecommunications equipment usage.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0084

Solicitation SPE8ED-27-T-0084 is a fixed-price contract issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of 39 units of Arm Shaft Belts, identified by NSN 3530-00-845-0805 and Singer Industrial Sewing Products part number 267161. The required delivery date is December 18, 2026, with a delivery timeframe of 27 days after award. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is strictly governed by MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans, with specific AQLs assigned for critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. The contract mandates the removal of government identification from non-accepted supplies and prohibits the intentional addition of mercury. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

7 days ago

DEADLINE

in 6 days

General Info

Agency

Department Of Defense → Navsup Flt Logistics Ctr Norfolk

Contract Value

$390,401

NAICS

333248 - All Other Industrial Machinery Manufacturing

Place of Performance

JBSA Ft Sam Houston, TX, 78234, USA

Set-Aside

NONE

Awardee

ADVANCED SOLUTIONS LIFE SCIENCES, LLC

Award Issued Date

08/19/2024, 12:00:00 AM UTC

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJun 3

Sources Sought

Response DeadlineJun 7

Deadline has passed

Submission Closed

06/07/2024, 04:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Norfolk

Contacts1 person available

OfficeNORFOLK, VA, 23511-3392, USA

Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Norfolk

Office AddressNORFOLK, VA, 23511-3392, USA

Contacts

Allison M Miller

contact@example.gov

Full Description

This is a sources sought synopsis to determine the availability of potential sources capable of providing a three-dimensional bioprinter that needs to be compatible with a wide array of materials of different viscosities for the Naval Medical Research Unit San Antonio, Fort Sam Houston, TX. The 3D bioprinter should function to incorporate various cell types and differentiation factors via addressing the complexity of dealing with living, temperature dependent factors. Also, in relation to the biomaterials, being able to regulate the temperature of the materials as well as UV cure materials will be a necessity to generate materials suitable for testing. The exact requirements for this contract are as follows: provide a 3D bioprinting system that is automated, high-throughput, and enables advanced tissue engineering through additive and continuous paths. The system must have the ability to deposit material in a finely contoured manner and this motion can only be achieved using the large range of motion afforded through a 6-axis robotic arm. The system must be able to support various printing tools including interchangeable print heads, enabling the incorporation of an array of different tasks and materials. Up to eight tools must be loaded, stored, and automatically exchanged during a single print experiment, thereby promoting complex tissue assembly that can be added at a later date. The tools that must be included upon delivery are 3/5/10ml pneumatic dispense syringe tool, 3/5/10ml mechanical dispense syringe tool, 30ml Pneumatic Dispense syringe tool, ambient syringe tool with UV curing tool, heat controlled pneumatic dispense syringe tool, and cold controlled pneumatic dispense syringe tool. The system must be capable of dual syringe dispensing with mixing. The system must be contained in a Class II, Type-A biosafety cabinet. The system must be contained in a biosafety cabinet for sterility purposes, and to meet safety requirements. The mechanics of the system must be controlled by a single software package which allows for custom structures to be designed to address specific application needs. Installation and training must also be provided. Advanced Solutions Life Sciences, LLC is currently the only known company who can provide this specific three-dimensional bioprinter that meets all of the Government's requirements. The North American Industry Classification (NACIS) code for this is 333248. Interested offerors possessing the ability to provide this specific three-dimensional bioprinter are invited to respond to this source-sought synopsis by providing their capability information via the submission of an executive summary, no more than one (1) page in length. The submission shall include the following information: (1) company name, address, point of contract with corresponding phone number and email address; and business size; and (2) relevant conference information. All submissions are required to be submitted via email to Allison.m.Miller38.civ@us.navy.mil. No later than 12:00 P.M. (local time/ Philadelphia, PA) on Friday, 07 June 2024. Please direct any question concerning this sources sought synopsis to Allison Miller at Allison.m.Miller38.civ@us.navy.mil.