Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

3ID G2 Electronic Security System (ESS) Upgrade

Active
PANMC26P0000050664Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Mission and Installation Contracting Command at Fort Stewart is conducting market research to identify capable businesses for a firm-fixed-price contract to upgrade and reconfigure electronic security systems. The project involves upgrading access-control and intrusion-detection systems, installing SCIF-specific workstations and compliant locking hardware, and installing vehicle sliding gates and card readers. All work must be integrated with existing government infrastructure and comply with FIPS 201 standards, specifically using approved 13.01 or 13.02 topologies. The requirement is located at Fort Stewart, Georgia, and falls under NAICS code 561621. Interested contractors must submit a detailed capability statement by September 8, 2026, demonstrating their experience with operational government facilities and the ability to provide personnel with Top Secret/SCI clearances. This is a sources sought notice for market research purposes only and is not a formal request for quotes or a binding solicitation.

General Info

Fort Stewart seeks contractors for electronic security system upgrades and SCIF installations.

Agency

Department Of Defense → W6QM Micc-Ft StewartView Agency

NAICS

561621 - Security Systems Services (except Locksmiths)View NAICS

Place of Performance

Fort Stewart, GA, 31314, USA

Set-Aside

NONE

Documents

(2)

EES+SOURCES+SOUGHT+NOTICE+%28Description%29.docx

DOCX

3ID+G2+ESS+Upgrade+PWS_Draft+2.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Stewart
Contacts2 people available
OfficeFORT STEWART, GA, 31314-3324, USA
Organization / Agency
Department Of Defense → W6QM Micc-Ft Stewart
View Agency Profile
Office AddressFORT STEWART, GA, 31314-3324, USA

Full Description

Show more

SOURCES SOUGHT NOTICE (Description)


3ID G2 ELECTRONIC SECURITY SYSTEM (ESS) UPGRADES


Notice ID: PANMC26P0000050664


THIS IS A SOURCES SOUGHT NOTICE FOR MARKET-RESEARCH PURPOSES ONLY. THIS IS NOT A REQUEST FOR QUOTES, INVITATION FOR BIDS, OR REQUEST FOR PROPOSALS. No solicitation is currently available. Responses to this notice will not be considered quotes, bids, or proposals and cannot be accepted by the Government to form a binding contract. The Government will not reimburse respondents for any costs incurred in preparing or submitting a response.


PURPOSE


The Mission and Installation Contracting Command–Fort Stewart is conducting market research in accordance with FAR Part 10 to identify capable businesses and assist the Government in determining the appropriate acquisition strategy, including the availability and capability of small-business concerns.


The Government is seeking information from businesses capable of performing the complete requirement described below. The Government is also interested in identifying existing contract vehicles through which the requirement may be acquired.


REQUIREMENT DESCRIPTION


The anticipated requirement is for a firm-fixed-price, non-personal services contract or order to upgrade and reconfigure access-control systems and intrusion-detection systems at Fort Stewart, Georgia.


The contractor would be required to provide all personnel, equipment, supplies, transportation, tools, materials, supervision, and other non-personal services necessary to perform the requirement. The anticipated work includes:


1.           Upgrading and reconfiguring existing electronic security systems.


2.           Installing badging and SCIF-specific workstations.


3.           Replacing legacy magnetic locks with SCIF-compliant electric locking hardware.


4.           Realigning intrusion-detection-system zones.


5.           Installing and integrating access-control and intrusion-detection equipment.


6.           Replacing designated doors and frames.


7.           Installing vehicle sliding gates and gate operators.


8.           Replacing gate-pedestal card readers.


9.           Performing required system programming, integration, testing, commissioning, documentation, and training.


10.        Restoring affected surfaces and work areas following installation.


The contractor must be capable of integrating the new work with the Government’s existing electronic security infrastructure and performing work in and around Sensitive Compartmented Information Facilities. Contractor personnel must be capable of satisfying all applicable installation-access, personnel-security, technical-certification, and security-clearance requirements identified in the final requirement.


FIPS 201 AND PHYSICAL ACCESS CONTROL SYSTEM REQUIREMENTS


The contractor must be capable of upgrading and integrating the Government’s existing Physical Access Control System using products and solution components that comply with Federal Information Processing Standard 201 requirements.


Physical Access Control System products and integrated solution components furnished under the anticipated requirement must be listed as approved under the Federal Government’s FIPS 201 Evaluation Program and must remain approved at the time of installation. The proposed solution must use an approved 13.01 or 13.02 topology, as applicable, and must preserve compatibility with the Government’s existing DAQ-based electronic security infrastructure.


The current FIPS 201 Approved Products List is available at:


https://www.idmanagement.gov/fips201/


Place of Performance: Fort Stewart, Georgia 31314.


The anticipated Product Service Code is N063, Installation of Equipment—Alarm, Signal, and Security Detection Systems. The anticipated North American Industry Classification System code is 561621, Security Systems Services (except Locksmiths).


CAPABILITY-STATEMENT REQUIREMENTS


Interested businesses shall submit a capability statement addressing the complete requirement. Responses should not merely state that the company is capable. Each response should provide sufficient information for the Government to evaluate the firm’s actual qualifications, experience, resources, and ability to perform.


At a minimum, responses shall include:


1.           Company name, physical address, website, telephone number, and primary point of contact, including email address.


2.           Unique Entity Identifier and Commercial and Government Entity code.


3.           Business size under NAICS 561621 and all applicable socioeconomic categories, including small business, 8(a), HUBZone, service-disabled veteran-owned small business, veteran-owned small business, and women-owned small business status.


4.           A description of the company’s ability to perform the complete requirement as a prime contractor, including its anticipated use of subcontractors or teaming partners.


5.           Relevant experience from up to three contracts or projects completed or substantially performed within the past five years. For each example, identify the customer, contract number if applicable, period of performance, approximate value, scope, and a customer point of contact if releasable.


6.           Experience installing, programming, integrating, testing, and commissioning access-control and intrusion-detection systems in operational Government facilities.


7.           Experience performing electronic-security-system work in Sensitive Compartmented Information Facilities or similarly controlled facilities.


8.           The respondent’s experience, manufacturer authorizations, certifications, and technical qualifications for installing and integrating FIPS 201-compliant Physical Access Control System solutions with existing DAQ-based systems. Identify the applicable FIPS 201 Approved Products List numbers and the approved 13.01 or 13.02 topology for the solution the respondent is capable of providing. If cloud infrastructure or services would be used, explain how the proposed deployment would satisfy applicable Federal Risk and Authorization Management Program and agency cybersecurity requirements.


9.           The company’s ability to provide personnel capable of satisfying the anticipated Top Secret/Sensitive Compartmented Information clearance and access requirements.


10.        Identification of any GSA Multiple Award Schedule contract, applicable Special Item Number, Government-wide acquisition contract, indefinite-delivery contract, or other existing contract vehicle through which the company could provide the required products and services.


11.        Whether the products and services are customarily offered in the commercial marketplace and any customary commercial practices the Government should consider.


12.        Any anticipated technical, schedule, security, supply-chain, or acquisition barriers that could affect successful performance.


13.        The respondent’s recommended period of performance and estimated mobilization time following award.


14.        Any recommendations that would improve competition, reduce performance risk, or clarify the requirement.


SUBMISSION INSTRUCTIONS


Capability statements shall be submitted electronically no later than 1:00 p.m. Eastern Time on 8 September 2026 to [joseph.e.lindsey18.mil@army.mil, justin.m.grant15.mil@army.mil, james.a.caldwell85.mil@army.mil].


The email subject line shall state:


PANMC26P0000050664 – 3ID G2 ESS Upgrade Sources Sought Response


Responses should be provided in Microsoft Word or searchable PDF format and should not exceed 10 pages, excluding a cover page. Respondents shall clearly mark proprietary or competition-sensitive information. The Government may contact respondents for clarification or additional market-research information.


Do not submit formal pricing or a binding quote in response to this notice.


The Government will use the information received for market-research and acquisition-planning purposes. Responses will not receive a formal evaluation or source-selection decision. The Government is not obligated to issue a solicitation or award a contract as a result of this notice. If a solicitation is issued, it will be announced separately through the appropriate Government procurement system, and interested parties will be responsible for monitoring that system for future notices.

Similar Contracts

Same NAICS industry code

NAICS: 561621
New
FIRE ALARM REPAIRS
Solicitation # WL – 26 - 005
The Woodland Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, is soliciting a single lump sum contract for fire alarm repairs and system upgrades in Laurel, Maryland. The scope of work includes replacing 13 smoke detectors with multi-criteria detectors featuring integrated CO sensors, installing a VESDA aspirating smoke detection system in the atrium, and replacing a non-operational remote annunciator panel at the south main entrance. The contractor may also be required to upgrade the main fire alarm control panel motherboard to ensure CO detector functionality. All work must comply with NFPA 72 and NFPA 101 standards, as well as EPA, OSHA, and Maryland state regulations. Proposals are due by September 3, 2026, and must be submitted on company letterhead with a detailed cost breakdown for labor, materials, and equipment. A mandatory site visit was scheduled for August 20, 2026, and only vendors who attended will be considered. Award will be based on best value rather than lowest price. The selected contractor must start work within 14 days of the Notice to Proceed and provide a sequenced construction schedule within 10 days. Payment terms are Net 30, and final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. The contract includes a one-year warranty on all workmanship. This opportunity is set aside for small businesses and various SBA-certified categories.
ADAMS & ASSOCIATES\ WOODLAND JOB CORPS CENTER

POSTED

about 9 hours ago

DEADLINE

in 7 days
View Details
NAICS: 561621
New
Federal
Electronic Security Systems Upgrades at USCG Station Bodega Bay
Solicitation # 30462PR260000128
Solicitation 30462PR260000128 is a small business set-aside request for quote for a turn-key modernization of the Electronic Security Systems (ESS) at USCG Station Bodega Bay. The project involves replacing obsolete legacy CCTV and proximity card readers with updated Video Surveillance Systems (VSS) and Physical Access Control Systems (PACS) that must be FIPS 201 and FICAM compliant. Key requirements include conducting a physical site survey, developing an ESS Security Plan, procuring materials, decommissioning legacy equipment, and performing system installation and integration. The contractor must also provide a Software Bill of Materials, a project schedule, and weekly status reports. Final acceptance is contingent upon visual verification of the installation and a successful System Acceptance Test. The government will award the contract to the responsible vendor offering the lowest price among those whose technical and management approaches are evaluated as acceptable and reasonable. Offerors must be registered in SAM.gov and submit quotes via email to the contracting officer and contract specialist. Proposals must include a management approach for supervising BPA call orders and an Accessibility Conformance Report for all ICT products. Security requirements are stringent, requiring personnel to undergo annual cybersecurity training, sign non-disclosure agreements for access to controlled unclassified information, and adhere to the Real ID Act for facility access. All on-site work is generally performed Monday through Friday, 0800 to 1700 PST.
Base ALAMEDA(00031)

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details
NAICS: 561621
New
Federal
J063--CTX Surveillance System Installation Palestine CBOC
Solicitation # 36C25726Q0692
Solicitation 36C25726Q0692 is a Request for Quotation issued by the Department of Veterans Affairs, Network Contracting Office 17, for the installation of a CTX surveillance system at the Palestine Community Based Outpatient Clinic in Palestine, Texas. This procurement is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 561621. The project requires the deployment of a fully operational IP camera surveillance system integrated with OpenEye Web Services for cloud-managed video, secure remote access, and health monitoring. Key deliverables include the installation of cameras, the provision of as-built cabling and equipment drawings, final acceptance test results, and a one-year installation and equipment warranty. The scope of work encompasses the installation of cameras, web-based monitoring, and annual maintenance, including preventive services, firmware updates, and storage verification. The contractor must ensure all work complies with OSHA, NEC, NFPA, and VA guidelines, while maintaining NDAA Section 889 compliance for all components. Emergency camera repairs are required with a response time of 24 to 48 hours. Acceptance of the system is contingent upon passing a full operational test without deficiencies, meeting specific video resolution and clarity requirements, and the approval of a comprehensive documentation package by the VA. Responses are due by August 31, 2026, at 10:00 AM Central Time.
257-NETWORK Contract Office 17 (36C257)

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 561621
New
Federal
Electronic Security Systems Upgrades at USCG Station Rio Vista
Solicitation # 30890PR260000111
Solicitation 30890PR260000111 is a small business set-aside request for quote for a firm-fixed-price contract to provide a turn-key modernization of the Electronic Security Systems at USCG Station Rio Vista in California. The project involves the decommissioning of legacy equipment and the installation of new Video Surveillance Systems and Physical Access Control Systems compliant with FIPS 201 and GSA APL standards. Key deliverables include a site survey, a formally approved ESS Security Plan, a Software Bill of Materials, and the successful completion of System Acceptance Testing. The requirement falls under NAICS 561621 and PSC N063. The government will award the contract to the responsible vendor offering an acceptable technical approach at the lowest price. Offerors must be registered in SAM.gov and provide a management approach detailing the supervision of tasks. A site visit is scheduled for August 21, 2026, at 11:00 AM PDT, requiring a completed Base Access Form by August 18, 2026. Questions are due by August 24, 2026, and quotes must be emailed to the contracting officer and contract specialist. All project documentation is designated as Controlled Unclassified Information, requiring strict adherence to DHS and NIST cybersecurity standards and the signing of non-disclosure agreements by all personnel.
Base ALAMEDA(00031)

POSTED

about 13 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → W6QM Micc-Ft Stewart

Same awarding agency

NAICS: 238910
Federal
Master Breacher Course Support
Solicitation # W9124M26RA002
This contract, solicited under number W9124M26RA002 and issued by the Department of the Army at Fort Stewart, Georgia, entails firm fixed-price support services for the Regimental Master Breacher Course (RMBC) at Fort Benning, Georgia. The scope requires the contractor to provide all materials, labor, and services necessary to construct, maintain, and support demolition and breaching training targets and aids for a minimum of three courses annually, with specific scheduled dates in 2026 and potential additional course offerings on option. The contract covers the procurement and assembly of steel sheets, concrete masonry units, chain-link fencing, oxygen bottles, and other specialized materials, as well as construction services such as erecting walls, doors, and barricades that comply with defined technical and safety standards. Quality control is paramount, with deliverables needing substantial completion well in advance of training start dates and subject to rigorous inspection and acceptance criteria conducted onsite by government representatives. The solicitation is a total small business set-aside under NAICS code 238910, requiring proposals to be submitted electronically by December 18, 2025. Proposals must include essential identifiers such as the offeror’s name, contact info, and Unique Entity Identifier (UEI). Contractor personnel are expected to comply with security and privacy requirements, including preference for Secret-level clearances, signature of nondisclosure agreements, and completion of mandatory training certifications. The contract mandates wearing identification badges and adherence to safety protocols per EM 385-1-1 standards, including accident prevention planning, use of PPE, and adherence to environmental compliance directives. Contract management responsibilities include designated key personnel with defined qualifications, submission of a Quality Control Plan within 10 days of award, and maintaining rigorous coordination with Contracting Officer Representatives. Performance is measured by detailed quality standards, ensuring structural integrity, proper installation according to US building codes, and meeting a 90 percent compliance threshold with minimal allowable discrepancies per course. Delivery and performance occur at specified range locations within Fort Benning, with all targets subject to government inspection prior to acceptance. The contract emphasizes non-personal services, requiring the contractor to operate independently while coordinating with government personnel for site access and operational oversight.
Site Preparation Contractors

POSTED

9 months ago

DEADLINE

in 4 months
View Details