Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

4 fluid systems components as spares for Kennedy Space Center Propellants & Life Support Services (KPLSS), 2 Oxygen Quick-Disconnects, 2 456" long Flex hoses

Active

80NSSC26940864QFederal

Response Deadline08/18/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The NASA Shared Services Center is soliciting bids for the procurement of four fluid systems components to serve as spares for the Kennedy Space Center Propellants and Life Support Services. The required hardware consists of two oxygen quick-disconnects and two flex hoses, each measuring 456 inches in length. This requirement is categorized under NAICS code 333996 and is designated as a total set-aside for small businesses. The solicitation, numbered 80NSSC26940864Q, was posted on August 12, 2026, with a response deadline of August 18, 2026. Interested parties should coordinate with the primary point of contact, Kacey Hickman, or the secondary contact, Bobbie Young. The contracting office is located at the Stennis Space Center in Mississippi.

General Info

Small business bid for four fluid system spare components for Kennedy Space Center.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

MS

Set-Aside

SBA

Documents

(2)

SATPC0042223+Tab+04+4+SOW.pdf

PDF

SATPC0042223+Tab+10+Open+Market+RFQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis

PostedAug 12

Combined Synopsis

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 08:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

Contacts2 people available

OfficeSTENNIS SPACE CENTER, MS, 39529, USA

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressSTENNIS SPACE CENTER, MS, 39529, USA

Contacts

kacey Hickman

contact@example.gov

Bobbie Young

contact@example.gov

Full Description

Show more

see attached SOW and RFQ

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-26-T-275E

This contract is for the procurement of one rotary pump, identified by NSN 4320013221186 and part number HDB1 1/2, SN8A from Warren Rupp Inc. The order is managed under solicitation SPE7M1-26-T-275E for the Maritime Supply Chain within the Department of Defense. Delivery is required within 20 days, with a final required delivery date of August 10, 2026, shipped FOB Destination to the USS Jefferson City SSN 759. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-P-16789. A critical environmental restriction prohibits the use of Class I ozone depleting chemicals in the delivered items. The contract also specifies that inspection and acceptance will occur at the destination, with no allowable quantity variance.

MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

PUMP UNIT, CENTRIFUG

Solicitation # SPE7M1-26-T-271L

This contract, identified as SPE7M1-26-T-271L, is a solicitation by the Department of Defense Maritime Supply Chain for the procurement of three centrifugal pump units. The required equipment is identified by NSN 4320-01-586-3481 and part number 891-20060 from Guild Associates Inc. The delivery is set for 191 days after order, with a required delivery date of March 1, 2027. The items must be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Compliance with DLA packaging requirements is mandatory, specifically adhering to ASTM D3951, MIL-STD-129, and RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance. Inspection and acceptance will take place at the destination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-274S

This contract is for the procurement of seven pump rotors, identified as Megator Corp model H-300 with part numbers 6131-F and BW7224. The items are classified as critical application items made from corrosion-resistant steel. The agreement specifies strict prohibitions against the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components as defined by NAVSEA. The order is managed under solicitation SPE7M1-26-T-274S with a required delivery date of January 19, 2027, and a delivery window of 161 days. Shipping is FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M1-26-T-274W

Solicitation SPE7M1-26-T-274W is a total small business set-aside issued by the Defense Logistics Agency Maritime Supply Chain for the procurement of 12 reciprocating pumps. The required hardware includes part numbers L2082 and P-84-8800 under NSN 4320-01-536-5798. The contract specifies a delivery timeline of 161 days after the order, with an original required delivery date of November 1, 2026, and a need ship date of February 2, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for marking and bar-coding. Special material restrictions are in place per NAVSEA 5100-003D, prohibiting the intentional addition of mercury except in specific functional applications. Cybersecurity compliance is a critical requirement, necessitating a CMMC Level 2 self-assessment and adherence to DFARS 252.204-7012 for safeguarding covered defense information. Invoicing must be processed electronically via Wide Area WorkFlow.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-26-T-242C

Solicitation SPE7M1-26-T-242C is a total small business set-aside issued by the Department of Defense Maritime Supply Chain for the procurement of 93 centrifugal pumps, specifically ITT JABSCO part number 50840-0024 (NSN 4320015407299). The contract requires delivery to DLA Distribution Warner Robins in Georgia by December 18, 2026, with a delivery window of 129 days after the date of order. Terms are established as FOB Origin, with inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific packaging mandates such as ASTM D3951, MIL-STD-129 for marking and labeling, and RP001 for palletization. Invoicing must be processed electronically through Wide Area WorkFlow. The solicitation incorporates various FAR and DFARS clauses covering equal opportunity, combating trafficking in persons, and hazardous material identification. All proposals must be submitted electronically via the DLA Internet Bid Board System by August 13, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 21 hours

Solicitation # SPE7M1-26-T-273V

This contract is a solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of 24 jet ejectors, identified by NSN 4320-01-554-3622. The requirement specifies parts from Evac North America Inc, specifically part numbers 5700230 and 5999142. This is a Women-Owned Small Business Set-Aside under NAICS code 333996, with a required delivery date of December 6, 2026, and a need ship date of February 2, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract incorporates technical and quality requirements from the DLA Master List and requires the removal of government identification from any non-accepted supplies.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PUMP-PLATE ASSEMBLY

Solicitation # SPE7M1-26-T-236U

Solicitation SPE7M1-26-T-236U is a total small business set-aside issued by the DLA Land and Maritime Maritime Supply Chain for the procurement of 20 pump-plate assemblies, identified by NSN 4320-01-574-2411. The requirement specifies a delivery timeframe of 219 days after order, with a need ship date of March 18, 2027, and a final required delivery date of April 13, 2027. Delivery is FOB Origin to the DDSP New Cumberland facility in Pennsylvania, utilizing the First Destination Transportation program. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the use of Class I ozone-depleting chemicals is strictly prohibited. Additionally, the procurement prohibits the use of additive manufacturing processes unless specifically authorized. Compliance with the Berry Amendment, Buy American Act, and NIST SP 800-171 cybersecurity standards is required. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

in about 21 hours

CENTRAL SW COOLING PUMP - USNS WILLIAM MCLEAN

Solicitation # N3220526Q7229

The Department of Defense, through Mschq Norfolk, is soliciting the procurement of saltwater cooling pump parts for the USNS William McLean. These specific components are manufactured by Air and Liquid Systems Corporation under manufacturer drawing DWG-CA16737 REV B. The requirement is categorized under NAICS code 333996 and is open to all bidders as there is no set-aside designation for this procurement. The solicitation, identified by number N3220526Q7229, was posted on August 11, 2026, with a response deadline of August 18, 2026. Performance of the contract will take place in Virginia. Primary coordination for this effort is managed by Grant Sivertson and Cameron Alvey out of the Norfolk, Virginia office.

POSTED

DEADLINE

BOAST RFOP - Hand Pump Assembly - NSN: 4320-01-201-0814

Solicitation # PANDTA-26-P-0000_036569

The Army Contracting Command - Detroit Arsenal is issuing a Request for Order Proposal under the Basic Ordering Agreement Sustainment Track program to procure 387 Hand Pump Assemblies identified by NSN 4320-01-201-0814 and part number 9338160, under a Total Small Business Set-Aside for NAICS code 333996. This is a Firm-Fixed-Price order with evaluation based solely on price reasonableness, awarding to the lowest-priced responsible offeror who holds a fully executed BOAST Basic Ordering Agreement prior to the submission deadline of July 30, 2026. Only vendors with an active BOA are eligible for award, and proposals from those without one will be rejected without evaluation. The item is export-controlled, and access to the associated Technical Data Package requires JCP certification; vendors must confirm their certification status or apply for it via DD Form 2345 prior to accessing the data. The contract mandates compliance with stringent quality standards including ISO 9001:2015 excluding paragraph 8.3, FAR and DFARS clauses for inspection at origin, responsibility for supplies, drug-free workplace, subcontracting competition, and Buy American requirements, with packaging and marking governed by MIL-STD-2073-1, MIL-STD-129, and the specific SPI 9338160 Revision B. Delivery must be made to DLA Distribution Anniston, Alabama, under FOB Destination terms, with all items required within 270 calendar days after receipt of order, though accelerated schedules are permitted. Data deliverables including phosphate coating procedures, engineering change proposals, and variance requests are required via CDRLs and must be submitted with the proposal. Pricing is not pre-established; vendors are to submit sealed, electronically transmitted proposals via email with a prescribed subject line. The Government will conduct a contractor responsibility determination prior to award and will not conduct discussions. Payment terms are Net 30 days following invoice receipt and goods acceptance, with electronic submission of payment requests mandated. All contractors must complete OPSEC awareness training and provide proof within 10 days, comply with applicable export control and demilitarization provisions under ITAR and EAR, and flow down quality, compliance, and security requirements to subcontracts. The solicitation contains no separate technical proposal requirement, and only the completed pricing sheet is needed. Proposals must remain firm for 1

POSTED

DEADLINE

Solicitation # SPE7M1-26-Q-1344

The contract pertains to the procurement of three units of a RING, WEARING with NSN 4320-01-505-0957, under solicitation SPE7M1-26-Q-1344, issued by the Department of Defense’s Maritime Supply Chain through DLA Land and Maritime. The item is associated with specific manufacturer part numbers from CIRCOR NAVAL SOLUTIONS LLC, including 725D0064, 999R501 FIND 7, and PL-999R0501 FIND 7, and may require casting or forging during manufacture, for which the government does not hold the associated tooling; contractors seeking assistance must submit a Casting and Forging Assistance Request through designated DLA channels. Strict restrictions prohibit the intentional addition or direct contact of mercury or mercury-containing compounds with the hardware, except for limited functional uses in batteries, fluorescent lighting, sensors, controls, weapon systems, or NAVSEA-specified reagents, with portable devices containing mercury needing shock-proof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements via R or I numbers, and the product must comply with MIL-STD-2073-1E packaging standards, including preservation method 31, unit container D3, intermediate container E6, and marking per MIL-STD-129 with no special markings. Palletization must adhere to DLA Packaging Requirements RP001. Delivery is required within 30 days after award, with FOB origin terms and destination as the inspection and acceptance point. The contract is Firm Fixed Price with zero variance allowed, and payment will be processed electronically through the Wide Area WorkFlow system with specific DoDAAC references as outlined in the contract sections. The solicitation is a small business set-aside under NAICS code 333996, requiring offerors to maintain an active SAM registration with updated information within the prior 12 months and to affirm representations regarding inverted domestic corporations, felony convictions, unpaid federal tax liability, and compliance with cybersecurity protocols including NIST SP 800-171 and the safeguarding of covered defense information as mandated by FAR 52.246-2 and DFARS 252.204-7012. Additional clauses bind contractors to

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-270P

The contract solicits twenty undersize composite material wearing rings identified by NSN 4320-01-498-1866 and part number CIRCOR NAVAL SOLUTIONS LLC 63857 P/N 0654C0680S902A, with mandatory sourcing from an approved manufacturer and approved materials as specified on the referenced technical drawing. The item must be mercury free and comply with all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including tailored higher-level contract quality provisions, configuration change management procedures, removal of government identification from non-accepted supplies, DLA packaging standards, and measuring and test equipment criteria. Inspection and acceptance are required at the destination and at the actual manufacturing facility, with technical inspection mandatory and count, kind, and condition inspections explicitly prohibited. The contractor must make all drawings and technical data available for verification and implement an inspection system compliant with SAE AS9003 or ISO 9001 tailored to AS9003. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan, with verification levels or AQLs assigned per critical, major, or minor attributes. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific preservation, unit container, and palletization codes applied. Hazardous materials must be labeled per the Hazard Communication Standard unless otherwise exempted under specified federal acts, and all items must be free of hexavalent chromium and mercury. The solicitation mandates electronic invoicing via WAWF and compliance with extensive cybersecurity and information safeguarding requirements, including NIST SP 800-171 assessments, safeguarding covered defense information, cyber incident reporting, and prohibitions on covered telecommunications equipment. Offerors must provide representations regarding compensation of former DoD officials, whistleblower rights, trafficking in persons, employment eligibility verification, sustainable products, and exclusion from federal awards for entities providing prohibited telecommunications equipment. The contract includes provisions for government delay of work, electronic payment submissions, levies on payments, accelerated payments to small business subcontractors, and restrictions on mandatory arbitration agreements. Delivery is required within 262 days after contract award, and quotations must be submitted via the DLA-BSM Bid Board System by the deadline of August 21, 2026. Although the solicitation

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

PUMP, FUEL, ELECTRICAL

Solicitation # SPE7L3-26-Q-1270

The contract is for the procurement of one unit of a fuel pump, electrical, identified by NSN 2910-01-595-9022 and part number 4941173 manufactured by CUMMINS INC. The requirement is issued under solicitation SPE7L3-26-Q-1270 with a firm fixed price structure and zero tolerance for quantity variance, meaning exactly one unit must be delivered. Delivery is due 90 days after award, with FOB origin terms and destination inspection and acceptance. All packaging must comply with ASTM D3951, but only to the extent it does not conflict with the higher precedence DLA Master List of Technical and Quality Requirements referenced through RA001, and all labeling and palletization must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements. The item will be shipped to a military installation in Prince Sultan, Saudi Arabia, and electronic invoicing via WAWF is mandatory, with payment processed through electronic funds transfer. The contractor must comply with extensive cybersecurity, supply chain integrity, and anti-counterfeiting mandates including DFARS 252.204-7012, 252.246-7007, and 252.246-7008, as well as prohibitions on covered telecommunications equipment and the use of certain foreign-sourced materials. The Berry Amendment and Buy American Act apply, with a reduced threshold of $150,000, and non-domestic material must be disclosed. Additive manufacturing is prohibited unless explicitly authorized. The contractor must also provide antiterrorism training to employees, ensure compliance with whistleblower protections, and maintain supply chain traceability documentation. The award will be based on best value, with price and past performance each weighted equally at 50% of the evaluation, and delivery schedule considered alongside them. All offers must be submitted electronically via DIBBS by the deadline of August 25, 2026. The contractor is required to maintain current representations and certifications on SAM.gov, including those related to foreign ownership, trade agreements, and the Buy American Program. The point of contact for the contract is Lee Miller of DLA Land and Maritime, reachable by phone and email.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

Spectral Filter for High Spectral Resolution Lidar at 467 nm

Solicitation # 80NSSC26938506Q

NASA Shared Services Center is seeking a sole source contract with LightMachinery Inc. for the fabrication, assembly, and testing of an off-axis, pressure-tuned, field-widened Michelson interferometric spectral filter for High Spectral Resolution Lidar at 467 nm. This commercial acquisition, conducted under FAR 12.102(a) and NAICS code 334516, will be performed at the NASA Langley Research Center. The period of performance is scheduled from June 2026 through September 30, 2027. The project requires the delivery of a fully assembled interferometer and associated components, including Invar-36 bonding plates and a coated beamsplitter cube, all meeting strict space-grade environmental standards. Technical requirements include a free spectral range of 1.576 GHz, contrast exceeding 100:1, and a wavefront error of 10 nm RMS or less. The system must be compatible with high vacuum environments, survive vibration testing of 6.8 g-RMS, and undergo rigorous thermal cycling between -30C and +60C. Key deliverables include a final metrology report and documentation of thermal cycling. The contractor is responsible for multiple shipping iterations to NASA Langley for polishing and wavefront correction, utilizing custom shock-absorbing packaging with indicators. Interested organizations were invited to submit capabilities and qualifications by August 6, 2026, to determine if the procurement would remain sole source or become competitive.

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

Acoustic Wind Profiler

Solicitation # 80NSSC26938875Q

The NASA Shared Services Center is seeking an Acoustic Wind Profiler under solicitation 80NSSC26938875Q. This combined contract opportunity is designated as a total small business set-aside under NAICS code 334519. The procurement is managed by the National Aeronautics And Space Administration, with primary contact Tracy Bremer and secondary contact Will Garrett. The place of performance for this requirement is located in Edwards, California, while the contracting office is based in Stennis Space Center, Mississippi. Interested parties must submit their responses by the deadline of August 18, 2026. Detailed requirements are outlined in the accompanying Request for Quotation and Statement of Work.

Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

Rebuild Kits for CPC Cryolab Cryogenic Valves on Vacuum Facility

Solicitation # 80NSSC26940022Q

NASA/NSSC is seeking rebuild kits for CPC Cryolab Cryogenic Valves located at Vacuum Facility 6 within the NASA Glenn Research Center. The agency intends to award a sole source contract to Acme Cryogenics, Inc., as they have been identified as the only provider capable of supplying these specific kits. This procurement is being conducted under FAR Part 12 for commercial items, utilizing NAICS code 332911. Interested organizations may submit documentation of their capabilities and qualifications to the identified points of contact by 9:00 a.m. CST on August 17, 2026. These submissions will be used solely to determine if the procurement should be conducted on a competitive basis. The government explicitly states that price quotes will not be reviewed or accepted at this time, as the current focus is on evaluating technical capabilities.

Industrial Valve Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supermicro Superserver 222C-TN

Solicitation # 80NSSC26940969Q

The NASA Shared Services Center is soliciting quotes for the acquisition of one Supermicro Superserver 222C-TN or an equivalent system for the NASA Langley Research Center in Hampton, Virginia. This is a brand name or equal requirement for a 2U server featuring dual Intel Xeon 6520P processors, 256GB of DDR5 ECC RDIMM memory, and a high-performance storage configuration including Kioxia NVMe SSDs and dual NVIDIA H200 NVL GPUs. The procurement is a total Small Business Set Aside under NAICS code 541519, with an award basis of Lowest Price Technically Acceptable (LPTA). Delivery is required within 30 days after receipt of order on an FOB Destination basis, and the system must include a 3-year advanced parts replacement warranty. Interested vendors must be registered in the System for Award Management (SAM) and submit their quotes to Shanna Patterson by August 13, 2026, at 7 a.m. CT. Submissions must include the tracking number 80NSSC26940969Q in the email subject line and provide the vendor's CAGE/UEI code, delivery lead time, and point of contact information. The government will not pay via credit card. Additionally, the contractor must comply with all U.S. export control laws, including ITAR and EAR, and adhere to specific packaging and marking requirements that identify the shipment as United States Government property.

Other Computer Related Services

POSTED

about 8 hours ago

DEADLINE

in about 16 hours

Rimini Street 3rd Party VMware Support Renewal

Solicitation # 80NSSC26941078Q

The NASA Shared Services Center is seeking a sole source contract for the renewal of third party VMware support provided by Rimini Street. This procurement is being conducted under FAR Part 12 for commercial items and services, with the performance located at the Kennedy Space Center. The effort is classified under NAICS code 541512. Interested organizations must submit their capabilities and qualifications to the primary point of contact, Kacey Hickman, by 3:00 p.m. Central Standard Time on August 14, 2026. These submissions will be used to determine if the procurement will remain a sole source or be opened for competition. All responses must be in writing, as oral communications are not permitted.

Computer Systems Design Services

POSTED

about 8 hours ago

DEADLINE

ETS Lindgren for Electric Field Measurement System

Solicitation # 80NSSC26939613Q

The NASA Shared Services Center is soliciting quotes for an ETS Lindgren Electric Field Measurement System under solicitation 80NSSC26939613Q. This procurement is a brand-name requirement specifically set aside for small businesses. Interested vendors must submit their quotes by August 18, 2026, and must include the notice ID in the subject line of their submission. To be considered acceptable, vendors must be authorized resellers and provide a Letter of Authorization along with proof of pricing from the manufacturer. Quotes must include the vendor's Cage Code, UEI number, lead time, and any applicable shipping costs, adhering to Net 30 and FOB Destination terms. Payment will not be made via credit card, and all available discounts should be applied to the final quote.

Analytical Laboratory Instrument Manufacturing

POSTED

about 8 hours ago

DEADLINE

High vacuum gantry for VOiD deposition system

Solicitation # 80NSSC26938077Q

NASA/NSSC is seeking a high vacuum gantry for the VOiD deposition system to be performed at the Glenn Research Center. The agency intends to award a sole source contract to Newmark Systems Inc under FAR 12.102(a), as they have been identified as the sole provider of the required equipment. This procurement is classified under NAICS code 541330 for commercial items or services. This notice serves as a capability posting to determine if the procurement should be conducted on a competitive basis. Interested organizations must submit their qualifications and capabilities in writing to the primary point of contact, Laura Quave, by 4:00 p.m. CST on August 14, 2026. Please note that formal quotes submitted in response to this specific notice will not be evaluated or considered by the technical team.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Extended 4-Year Parts and Labor Warranty and Technical Support

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Onsite Delivery, Installation, and Configuration at NASA AFRC

Computer Systems Design Services

POSTED

DEADLINE

360mm Liquid Cooling System Supply

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

1700W Titanium Power Supply Unit Supply

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Premium Component Supply for High-Performance Workstations

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE