Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

40-Ton Rough Terrain Crane

Awarded
FA813226Q0005Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Air Force awarded a firm-fixed-price contract valued at $507,999.23 to TECH SERVICE SOLUTIONS LLC of Phoenix, Arizona, for the delivery of a single 40-ton Rough Terrain Crane under solicitation FA813226Q0005, set aside entirely for small businesses under FAR 19.5 with NAICS code 333120. The crane, to be delivered to Building 2139 at Tinker Air Force Base in Oklahoma City, Oklahoma, must meet stringent technical specifications including a 100-foot telescoping boom, 440 feet of wire rope, a minimum 12,000-lb single-line pull capacity, Tier 4 Final diesel engine, four-wheel drive with four steering modes, hydraulic outriggers, and a 24-volt electrical system. The equipment must be self-unloaded from a lowboy trailer without any auxiliary lifting devices, and it must operate in both indoor and outdoor environments to support depot maintenance and aircraft recovery for E-3, KC-135, B-52, and C-130 platforms. Compliance with OSHA 29 CFR 1910, OSHA 29 CFR 1926, and ASME B30.5 is mandatory, along with adherence to Air Force Instruction directives including AFI 91-203, AFI 36-2650, and environmental protocols governed by AFI 32-7086 and TAFBI 32-7004. The contractor is responsible for full turnkey delivery, including training up to twenty personnel across two shifts during standard weekday hours, and must provide comprehensive documentation such as operation and maintenance manuals, illustrated parts breakdowns, spare parts lists, manufacturer certifications, and warranty data covering all components for 24 months. Special requirements include immediate reporting of environmental spills via 911 followed by a written report within four hours, strict tool accountability using MXRIWRS Form 032 with daily inventories and mandatory reporting of any missing tools within one hour, and mandatory FOD/DOP training certification submitted within ten business days of award. Access for foreign nationals requires prior government notification, and all personnel must follow visitor pass procedures requiring seven days’ advance notice and two forms of identification. Any injury or damage to government property must be reported within one business day, and contractor personnel

General Info

U.S. Air Force awards $507,999.23 small business contract for 40-ton crane to TECH SERVICE SOLUTIONS LLC with strict technical, safety, and delivery requirements.

Contract Value

$507,999.23

NAICS

333120 - Construction Machinery Manufacturing

Place of Performance

Oklahoma City, OK, 73173, USA

Set-Aside

SBA

Award Issued Date

Documents

2

Attachment+1+-+Statement+of+Work+%28H6WA20%29_20251014.pdf

PDF

CSS+-+H6WA20+40-Ton+Rough+Terrain+Crane.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8132 Afsc Pzimc
Contacts1 person available
OfficeTINKER AFB, OK, 73145-3303, USA
Office AddressTINKER AFB, OK, 73145-3303, USA

Full Description

Show more

AWARD NOTICE - 30 APRIL 2026


TECH SERVICE SOLUTIONS LLC, PHOENIX, ARIZONA


$507,999.23

Similar Contracts

Same NAICS industry code

NAICS: 333120
New
Federal
J061--Thompson Power Generator Service RFI Intent to Sole Source
Solicitation # 36C24927Q0025
The Department of Veterans Affairs intends to award a sole-source, firm-fixed price contract to Thompson Machinery Commerce Corporation for recurring full-service maintenance and rebuilds of the Caterpillar G3520C generator set and associated radiator system at the Alvin C. York Campus. This procurement, conducted under FAR 12.102-1(b) and NAICS code 333120, is justified by the proprietary nature of Caterpillar engine control software and the fact that Thompson Machinery is the only factory-authorized source for sales, service, and parts in the designated region. The contract is designed to ensure the continuous operation of the natural gas-fueled engine, which provides primary electrical power and steam to the facility. The scope of work requires manufacturer-certified technicians to perform maintenance according to service manual SEBU7681-16, including battery replacements every 24 months, radiator cleaning and fluid inspections every 1,000 hours, and comprehensive coolant and hose replacements every five years. Major deliverables include a standard top end overhaul every 18,000 service hours and a full out-of-frame overhaul during the fifth year of the contract. The estimated period of performance spans five ordering periods from December 1, 2026, through November 30, 2031. While this is an intent to sole source, the government will evaluate any interested parties who submit capability statements by October 30, 2026, to determine if the requirement should be competed.
249-NETWORK Contract Office 9 (36C249)

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333120
New
SLED
Compact Track Loader
Solicitation # 2026-15-RFB
Miami County, Kansas, through its Road and Bridge Highway Department, is soliciting bids under solicitation number 2026-15-RFB for the procurement of a new Compact Track Loader. The equipment must be built for the U.S. market, sold by a factory authorized dealer, and delivered in ready-to-use condition to the department in Paola, Kansas. Key deliverables include two operator manuals, parts and shop service manuals, a model brochure with detailed specifications, one complete set of filters, and a minimum two-year full warranty. Bidders are required to provide a demonstrator before the bid opening and must submit an itemized quote covering base specifications, delivery, and any additional options. The contract will be effective for approximately twelve months from the notice of award, with deliveries scheduled Monday through Friday between 7:00 a.m. and 3:00 p.m. CST, requiring 24 hours prior notification. Award determinations will consider cost, technical requirements, and discounts for prompt payment. The successful contractor may be required to provide performance and statutory bonds equal to 100 percent of the contract sum. All terms are governed by the laws of the State of Kansas and the District Court of Miami County, with specific compliance required for the Kansas Act Against Discrimination and the Americans with Disabilities Act. Payments are made in arrears via procurement card, check, or electronic transfer, subject to the Kansas Cash Basis Law.
Road & Bridge - Highway Department

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 333120
New
SLED
DOTD Buy Back Compact Track Loaders, SM
Solicitation # 3000026782
The Louisiana Department of Transportation and Development (DOTD) is seeking an Agency Term Contract for the procurement of 13 small compact track loaders. The solicitation requires that all equipment be new, current production models that comply with DOTD Equipment Specification No. 815-000A, Rev. 08/26/2026, as well as all applicable state and federal safety and emission standards. Units must be delivered completely assembled and operationally ready, with all fluid levels full and fuel tanks at least one-quarter full. Each unit must be accompanied by a dealer's service policy, build sheets, and both hardcopy and digital versions of the owner's and service manuals. The contract will be effective for an initial period of 12 months and one day from the date of award, with the possibility of two additional extensions of the same length, not to exceed a total of 36 months and 3 days. Delivery is preferred by February 28, 2027, to a facility in Baton Rouge, Louisiana, under F.O.B. Destination terms. Award evaluation factors include price, technical compliance, and the proposed delivery timeline. Payment will be issued within 30 days following the receipt of a proper invoice and successful inspection by the Equipment Engineer. Bidders must be registered and in good standing with the Louisiana Secretary of State and comply with various federal and state regulations, including the Copeland Anti-Kickback Act and prohibitions against discriminatory boycotts of Israel for qualifying vendors.
Procurement

POSTED

2 days ago

DEADLINE

in 24 days
View Details

More opportunities from Department Of Defense → FA8132 Afsc Pzimc

Same awarding agency

NAICS: 325998
New
Federal
FILM PROCESSING EQUIPMENT PM/RM
Solicitation # FA813226Q0062
Solicitation FA813226Q0062 is a request for quotations from the Air Force Sustainment Center for a five-year Firm Fixed Price contract to provide preventative and remedial maintenance for film processing equipment at the Oklahoma City-Air Logistics Complex, Tinker AFB, OK. This 100 percent Small Business Set-Aside under NAICS 325998 consists of one base year and four one-year options, with a projected start date of November 1, 2026. The scope of work includes maintaining Fuji/Colenta FDNX 5 HS and Waygate Technologies Structurix M ECO automatic wet film processors, chemical replenishment systems, and film autoloaders for the 76th Propulsion Maintenance Group and 76th Aircraft Maintenance Group. The contractor is required to perform four preventative maintenance visits per year per item and respond to remedial maintenance service calls within three days of notification. All work must adhere to Original Equipment Manufacturer specifications and be documented via service reports in accordance with T.O. 00-20-1, Chapter 7. Award evaluations will be based on price reasonableness and cost realism, with the total price of all options added to the base requirement. Key administrative requirements include NET 30 payment terms via Wide Area Workflow, strict OSHA labeling for hazardous chemicals, and mandatory SAM registration for all offerors. Quotes are due by October 26, 2026.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 333514
New
Federal
P&W Tooling Evaluation and Repair
Solicitation # PZIMCPWASSS
The Department of Defense, through the AFSC PZIMC at Tinker Air Force Base, Oklahoma, is conducting a sources sought synopsis under solicitation PZIMCPWASSS to identify qualified contractors for the evaluation and remedial maintenance of Pratt and Whitney (P&W) specific tooling. The scope of work involves the inspection and repair of 24 unique part numbers of PWA support equipment and tools, requiring all work to be performed in accordance with original equipment manufacturer specifications and applicable P&W technical data, engineering drawings, and manuals. Interested sources must demonstrate the ability to certify that repairs meet these technical standards and provide detailed inventory records and reporting on repair status. This market research effort seeks vendors with established quality programs, such as ISO 9001 or AS9100, and the necessary expertise to handle specialized tooling under NAICS code 333514. Respondents must submit a Contractor Capability Survey by November 5, 2026, providing comprehensive business information, including CAGE codes and socioeconomic status, along with detailed responses regarding their technical capabilities and past experience. Primary points of contact for this effort are Roger Farris and Sherry Harvey-Tuley. Security clearance levels and foreign participation restrictions have not yet been determined.
Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 611512
Federal
FOD/DOP and Safety Training Program DeliveryThe contract pertains to the development and delivery of Foreign Object Debris and Damage Prevention training tailored for crane operators and maintenance personnel, strictly aligned with Air Force Instructions. The training program is designed to enhance safety, reduce operational risks, and ensure compliance with standardized military protocols across facilities where heavy equipment is in use. It is structured as a subcontract under a Total Small Business Set-Aside, ensuring eligibility and participation by small businesses as defined by the SBA and FAR 19.5 regulations. The North American Industry Classification System code 611512 confirms the focus on professional and technical training services. Performance of the contract is centered in Oklahoma City, with the work to be executed at or near the designated Air Force installation under the FA8132 AFSC PZIMC oversight within the Department of Defense. The solicitation, posted in April 2026, indicates an upcoming opportunity for qualified small businesses to bid on providing comprehensive, field-relevant safety instruction that integrates practical techniques for identifying, preventing, and mitigating FOD and DOP incidents. There is no specified point of contact or detailed address, emphasizing the need for vendors to initiate direct engagement through the provided SAM.gov link for full submission requirements and technical expectations.
Flight Training

POSTED

6 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS