Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

41--IMPELLER,FAN,AXIAL

Awarded

SPE8E726T2372Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 41 impellers for axial fans under solicitation number SPE8E726T2372, awarded by the Defense Logistics Agency Troop Support, a division of the Department of Defense. The action is classified as an award notice, indicating that a contract has been finalized rather than being an invitation for proposals. The North American Industry Classification System code 333413 identifies the scope of work within the ventilating and heating equipment manufacturing sector. The awarding office is located in Philadelphia, Pennsylvania, with the primary point of contact being Chiara Ransome, reachable via email at Chiara.Ransome@dla.mil or by phone at 215-737-2740. No specific place of performance is listed, and no set-aside provisions apply, meaning the award was open to all eligible contractors without restrictions based on business size or veteran status. The notice was posted on May 27, 2026, and further details can be accessed through the SAM.gov workspace link provided.

General Info

Procurement of 49 axial fan impellers for DLA, set aside for Service-Disabled Veteran-Owned Small Businesses.

Agency

Department Of Defense → DLA Troop SupportView Agency

Contract Value

$25,829.86

NAICS

333413 - Industrial and Commercial Fan and Blower and Air Purification Equipment ManufacturingView NAICS

Place of Performance

PA

Set-Aside

NONE

Awardee

GLOBAL LOGISTICS STRATEGIES INC.View Profile

Award Issued Date

05/27/2026, 12:00:00 AM UTC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded

PostedApr 29

Combined Synopsis

AwardedMay 27

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

Contacts1 person available

OfficePHILADELPHIA, PA, 19111-5096, USA

Organization / Agency

Department Of Defense → DLA Troop Support

View Agency Profile

Office AddressPHILADELPHIA, PA, 19111-5096, USA

Contacts

Chiara Ransome

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=ed179f33fa0b456ba2fda2302348ac1d

Similar Contracts

Same NAICS industry code

Supply of Vaneaxial Fan (NSN 4140-01-300-8058)

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Manufacturing of NSN 4140-00-289-8801 Components

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

IMPELLER, FAN, AXIAL

Solicitation # SPE8E7-26-T-3633

This contract, identified by solicitation number SPE8E7-26-T-3633, is for the procurement of three axial fan impellers under National Stock Number 4140-01-421-3184. The acquisition is managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. The items are required to be delivered to the New Cumberland, Pennsylvania facility with a requested ship date of February 15, 2027, and an original required delivery date of May 4, 2027. Delivery terms are set as FOB Origin, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements, including documentation for source approval requests and specific DLA packaging requirements. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 standards. Additionally, the supplier must follow specific palletization protocols and ensure that any non-accepted supplies have government identification removed. The procurement is categorized under NAICS code 333413, and all technical requirements are governed by the DLA Master List of Technical and Quality Requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E7-26-T-3635

This contract is a solicitation for the procurement of one vaneaxial fan, designated under NSN 4140-01-300-8058, for non-nuclear applications. The equipment is specified to operate at 440 volts AC, 60 Hz, 3 phase, and single speed. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with a required delivery timeline of 167 days after order. The solicitation is categorized under NAICS code 333413, which pertains to other compressor and turbine pump manufacturing. The technical requirements heavily modify the MIL-F-18953B standard, specifically regarding coating specifications, material standards, and aerodynamic performance. Key modifications include strict requirements for zinc-molybdate primer and phenolic varnish coatings to ensure durability in air streams, as well as specific instructions for fastener materials and motor insulation temperature rises. Additionally, the contract outlines a rigorous quality assurance and testing protocol, including mandatory sequences for balance, casing tightness, performance, noise, vibration, and high-impact shock testing to ensure the unit meets all aerodynamic and structural stability standards.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E9-26-T-3546

This contract, identified by solicitation number SPE8E9-26-T-3546, is for the procurement of 10 vane axial fans, specifically part number M18953AA01WA4W6NANANA under NSN 4140-00-289-8801. The equipment is specified for AC, 440 volts, 60 Hz, three-phase applications and must comply with Qualified Products List (QPL) requirements. A critical condition of this contract is that the manufacturer must be QPL approved at the time of the contract award. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies, with specific exceptions for functional uses like batteries or sensors. The delivery is set for 203 days from the award date, with the items being shipped FOB Origin to the DLA Distribution New Cumberland Facility in Pennsylvania. Inspection and acceptance will both occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 marking standards, with a specific instruction to avoid the use of plastics for wrapping or cushioning whenever possible. The technical requirements are governed by MIL-PRF-18953C and the DLA Master List of Technical and Quality Requirements.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E9-26-T-3552

This contract, identified by solicitation number SPE8E9-26-T-3552, is for the procurement of seven vane axial fans, classified as critical application items. The procurement is conducted under full and open competition and requires adherence to specific technical and quality requirements outlined in the DLA master list. The items must be manufactured in accordance with MIL-PRF-18953C and reference QPL-18953-30. A strict environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this contract, with specific exceptions for functional uses like batteries or sensors. The delivery terms specify a quantity of seven units with a required delivery window of 167 days, targeting a need date of February 15, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, and contractors are encouraged to avoid using plastics for wrapping or cushioning whenever possible. The final destination for the shipment is the DLA Distribution New Cumberland Facility in Pennsylvania.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 20 hours ago

DEADLINE

USNS SOJOURNER TRUTH - Galley Mods

Solicitation # N3220526Q7255

POSTED

DEADLINE

Dust Collector with Installation

Solicitation # FA488726Q0054

Solicitation FA488726Q0054 is a Firm-Fixed Price contract for the procurement and installation of a wood dust collection and ambient-air filtration system at Building 948, Luke Air Force Base, Arizona. The requirement consists of two primary line items: the provision of one 7.5 HP dust collector meeting specific salient characteristics, including NFPA 664 compliance and a 230-gallon dump bin, and the professional installation of the unit, including new galvanized ducting, a custom capture plenum, and electrical work. The project requires the removal of the old system and all new packaging, with a mandatory minimum 12-month parts and labor warranty. The required delivery and completion date is December 10, 2026. This is a total small business set-aside with a 10 percent price evaluation preference for HUBZone small business concerns. Award will be made to the technically acceptable offeror with a Green or better Supplier Performance Risk System rating and the lowest Total Evaluated Price. Technical acceptability is determined on a pass/fail basis covering delivery schedule, technical approach, and material specifications. Prospective contractors must coordinate base access through the contracting officer, providing REAL ID compliant identification and vehicle documentation. It is noted that funds are not presently available, and no award will be made until such funds are secured. All invoicing and payment processing must be conducted through the Wide Area WorkFlow system.

FA4887 56 Cons Cc

POSTED

DEADLINE

Supply of Air Sanitizers

University Hospital of the West Indies

POSTED

DEADLINE

Kitchen Exhaust Hood, Duct, and Fan Cleaning

Facilities Management

POSTED

DEADLINE

FAN, VENTILATING

Solicitation # SPE8E7-26-T-3846

Solicitation SPE8E7-26-T-3846 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment office for the procurement of one ventilating fan, identified by NSN 4140-01-732-0418 and Rittal Corp part number SK3239.124. The requirement falls under NAICS code 333413. The item is to be delivered FOB Destination to the USNS City of Bismarck at FPO AA 34088-3000, with a required delivery date of August 18, 2026, and a delivery window of 20 days after receipt of order. Inspection and acceptance will take place at the destination in accordance with FAR 52.246-1. Packaging must comply with ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. All marking and labeling must adhere to MIL-STD-129, and palletization must follow RP001 requirements. The contract incorporates various federal and defense clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information under DFARS 252.204-7012, and hazardous material labeling per 29 CFR 1910.1200. Invoicing and payment processing are required to be handled through the Wide Area WorkFlow system. Quotes were requested via the DIBBS system with a response deadline of September 21, 2026.

Defense Logistics Agency

POSTED

DEADLINE

IMPELLER, FAN, AXIAL

Solicitation # SPE8E7-26-Q-0308

Solicitation SPE8E7-26-Q-0308 is a Firm Fixed Price request for quotation issued by the Defense Logistics Agency Troop Support for the procurement of one Axial Fan Impeller, identified by NSN 4140-01-322-8129 and part number B5W-33778-9. The requirement is for a single unit to be delivered to the USS Makin Island LHD 8 within 246 days after the order is placed. Inspection and acceptance will occur at the destination, with shipping terms set as FOB Origin. Quotations must be submitted by September 18, 2026, and remain valid for 90 days. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Palletization must comply with DLA requirement RP001, and the use of plastics for wrapping or cushioning should be avoided. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with various FAR and DFARS clauses regarding child labor, sustainable products, and the safeguarding of covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

Wholesaler/Distributor of Cylinder and Valve (NSN: 4240-00-106-6850)

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Supplier of Raw Materials for NSN 4240-00-106-6850

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

in about 1 month

Manufacturer of Cylinder and Valve (NSN: 4240-00-106-6850)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 1 month

Cylinder and Valve RFI

Solicitation # Cylinder_and_Valve_Sources_Sought

DLA Troop Support is conducting market research through a Sources Sought notice to identify potential suppliers for a Cylinder and Valve, identified by NSN 4240-001066850 and part number 22D17336-2. This item is classified as a critical part for the US Air Force. The agency is evaluating an acquisition strategy that may lead to an Indefinite Delivery/Indefinite Quantity contract, with requirements for direct deliveries to Defense Distribution Centers throughout the Continental United States. As part of this market survey, the government is seeking information regarding the availability of technically mature, production-representative items, as well as data on lead times, domestic sourcing, and business size. The inquiry also explores the feasibility of restricting the requirement to domestic materials or small business manufacturers and the willingness of suppliers to accept an Economic Price Adjustment tied to the Producer Price Index. Interested sources must submit their responses to James Lewicki by 11:30 AM EST on October 13, 2026. This notice is for information gathering only and does not constitute a formal request for proposal or a binding contract.

Apparel Accessories and Other Apparel Manufacturing

POSTED

DEADLINE

in about 1 month

Container - TRICONS

Solicitation # SPE8ED26xxxx

The Department of Defense, through DLA Troop Support, has issued a pre-solicitation notice for the procurement of 170 TRICON containers to be located within the continental United States. This notice serves as an announcement of the government's intent to solicit these items in the near future, with the full requirements to be detailed once the solicitation is published on DIBBS. This opportunity is designated as a total small business set-aside under NAICS code 332439. Interested responsible sources are encouraged to prepare for the upcoming solicitation, which is managed by the office in Philadelphia, Pennsylvania. Primary contact for this requirement is Anna K Lake.

Other Metal Container Manufacturing

POSTED

DEADLINE

Textile Laboratory Testing and Certification Services

Testing Laboratories and Services

POSTED

DEADLINE

Supply of Berry-Compliant Wool and Polyester Yarn

Yarn Spinning Mills

POSTED

DEADLINE

Manufacture of Military Dress Cloths (Poly/Wool and Wool Serge)

Textile and Fabric Finishing Mills

POSTED

DEADLINE

Dress Cloth Synopsis

Solicitation # SPE1C126F0077

The Department of Defense, through DLA Troop Support in Philadelphia, Pennsylvania, is issuing a presolicitation for the manufacture and delivery of various dress cloths intended for the Air Force, Navy, Marine Corps, Army, and Coast Guard. Under solicitation number SPE1C126F0077, this procurement is an unrestricted, full and open competition under NAICS code 313310. The agency intends to award up to three indefinite delivery indefinite quantity fixed-price contracts that include economic price adjustments, featuring a base ordering period of 12 months and additional optional ordering periods. The selection process will be based on a Best Value Tradeoff evaluation, where technical merit is weighted more heavily than price. Prospective bidders are required to provide cloth sample test reports and socioeconomic program support plans. The response deadline for this opportunity is September 24, 2026, and the primary point of contact for the solicitation is Jennifer Smith.

Textile and Fabric Finishing Mills

POSTED

DEADLINE

Egg Supplier – Puerto Rico Troops

Chicken Egg Production

POSTED

DEADLINE

Fresh Fruit and Vegetable Supplier – Puerto Rico

Fresh Fruit and Vegetable Merchant Wholesalers

POSTED

DEADLINE

Fresh Fruit and Vegetable Supplier – South Florida

Fresh Fruit and Vegetable Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS