Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

43--IMPELLER,PUMP,CENTR, IN REPAIR/MODIFICATION OF

Active
N0010426QYAC8Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. government, through NAVSUP Weapon Systems Support in Mechanicsburg, Pennsylvania, intends to award a sole-source contract to Curtiss-Wright Electro-Mechanical Corporation for the repair of a centrifugal pump impeller with part number 9892-03PH and NIIN 013914835, designated under NSN 7H-4320-013914835. This procurement is justified under 10 U.S.C. 2304(c)(1) and FAR 6.302 due to the unique nature of the item, as the vendor is the original equipment manufacturer and the only known source capable of providing the required repair, with the government holding no ownership or rights to underlying technical data. The repair work is for an emergency acquisition, and the contract will be issued under emergency authority with a one-year period of performance. Delivery is specified to W25G1U, W1A8 DLA Distribution in New Cumberland, PA. The solicitation will follow FAR Part 15 procedures, include Buy American requirements, and mandate UID labeling. Although the initial notice states the procurement is not a small business set-aside, contract data lists it as a Total Small Business Set-Aside, indicating a potential discrepancy. The solicitation will be issued electronically via NECO on or around August 2, 2026, with proposals due by September 2, 2026, and award anticipated by September 17, 2026. Interested parties may submit capability statements by email to Jessica Grzywna, and no hard copies or telephone inquiries will be accepted.

General Info

Sole-source repair of unique centrifugal pump impeller by Curtiss-Wright under emergency authority, one-year performance, small business set-aside.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-4320-013914835, TDP VER 001, QTY 1 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, INDUCTION NIIN IS 7H, 4320, 013914835, IMPELLER,PUMP,CENTR, 989892-03PH. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit on a sole source basis with Curtiss-Wright Electro-Mechanical Corporation (0UBG9) for the Repair of Items Below: NOMENCLATURE NIIN PART NUMBER AIRCRAFT IMPELLER,PUMP,CENTR 01391483598 9892-03PH SUB ENGINEERING/DIESEL SYSTEMS. There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing spares support of the above spares part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit and negotiate negotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 333996 PSC: 4320 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This NIIN is an emergency acquisition NIIN. This order will be issued pursuant to Emergency Acquisition Authority. Options will be added. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 02 AUG 2026 with an approximate response/closing date of 02 SEP 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 17 SEP 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Jessica Grzywna, jessica.t.grzywna.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
SLED
Water Filtration System Maintenance and Repairs at San Angelo State Supported Living Center
Solicitation # HHS0017602
The Texas Health and Human Services Commission through its Procurement and Contracting Services division is soliciting competitive bids for as-needed maintenance and repairs to water filtration systems at the San Angelo State Supported Living Center. The solicitation, identified as HHS0017602, was posted on July 31, 2026, with responses due by August 14, 2026, at 4:30 PM Central Time. This contract opportunity is open to vendors capable of providing timely and reliable services to ensure the proper functioning of water filtration systems critical to the health and safety of residents at the facility. The place of performance is located in Texas, and all work must be performed at the specified site without exception. The contracting authority is the Health and Human Services Commission, operating under the state of Texas as a state-level government entity. Primary point of contact for inquiries regarding the solicitation is David Martinez, reachable via email at David.Martinez01@hhs.texas.gov or by phone at 512-406-2597. Additional details, including submission guidelines and requirements, can be accessed through the official procurement portal at the provided UI link. There is no set-aside designation specified for this solicitation, meaning it is open to all qualified vendors regardless of business size or ownership characteristics. Vendors are expected to respond with comprehensive proposals detailing their experience, service approach, response times, and pricing structure for both routine maintenance and emergency repairs within the specified timeframe.
Health and Human Services Commission

POSTED

about 11 hours ago

DEADLINE

in 13 days
View Details
NAICS: 811310
New
Federal
XJF Compressor Rebuild
Solicitation # FA466126Q0071
The 7th Contracting Squadron is soliciting quotations for the rebuild of XJF151N compressors under solicitation FA466126Q0071, a Firm-Fixed Price contract issued as a total small business set-aside under NAICS code 811310. The work requires a complete overhaul of the compressors including diagnostic evaluation, replacement of internal seals and gaskets, functional verification, and proper disposal of removed components in compliance with OSHA and EPA standards, all to be performed at Dyess Air Force Base, Texas. All submissions must be received via email no later than 6 August 2026 at 3:00 p.m. CDT, following amendments that extended the original deadline from 31 July 2026. The solicitation references a Statement of Work and a Questions and Answers document as attachments, and offers must comply with all applicable regulatory and contractual requirements including the prohibition of certain chemicals, foreign supply chain restrictions, and cybersecurity protections mandated by DFARS 252.204-7012 and NIST SP 800-171. Offerors are required to provide valid Unique Entity ID and CAGE codes, certify small business status, and submit a Small Business Subcontracting Plan. The evaluation will be based on best value, considering technical acceptability, period of performance, and price, without a formal weighting system or lowest price technically acceptable threshold. Delivery is FOB destination to Dyess AFB, payment will be processed through Wide Area WorkFlow using DoDAAC F87700, and all items must be properly marked with country of origin and domestic content percentages as required by Buy American provisions. The Government retains full authority to inspect, accept, or reject deliverables and reserves the right to cancel the solicitation at any time without compensation to offerors.
FA4661 7 Cons Cd

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
MTU 6V92 Overhaul & Repair Services
Solicitation # 70Z04026Q51502B00
This solicitation seeks overhaul and repair services for MTU 6V92 marine engines installed on the 47-foot Motor Lifeboat, issued on a brand-name basis and restricted exclusively to authorized Original Equipment Manufacturer repair facilities using OEM parts. The solicitation number is 70Z04026Q51502B00, with a combined synopsis and solicitation posted on July 23, 2026, and a response deadline of July 31, 2026, at 6:00 p.m. EDT. The contracting office is the SFLC Procurement Branch 3 under the Department of Homeland Security, located in Baltimore, Maryland, with performance required at Curtis Bay, Maryland. All responses must adhere to the specifications outlined in the attached documents, including the revised CSS, schedule, overhaul specifications, Amendment 01 SF-30, and Questions and Answers document, which collectively define the technical and procedural requirements for submission. Only OEM-authorized facilities are eligible to respond, ensuring compliance with manufacturer standards and part authenticity. No set-aside programs are applied to this procurement. Point of contact for inquiries is Tracy L. Jacobs, with Derek W. Lazaroff as secondary contact, both reachable via official U.S. Coast Guard email addresses. While key sections such as evaluation factors, pricing, delivery terms, inspection criteria, and special requirements are not detailed in the provided documentation, the restriction to OEM facilities and mandatory use of original parts serve as critical eligibility and quality control parameters. The contract value and financial terms are not disclosed, and no information is available regarding payment processes, contract administration, or required certifications beyond the OEM authorization requirement.
Sflc Procurement Branch 3(00040)

POSTED

about 20 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Scissor Lift Repair
Solicitation # M0068126Q0054
This solicitation, numbered M0068126Q0054 and titled Scissor Lift Repair, seeks services to repair one Autoquip scissor lift located in building 2251 aboard Marine Corps Base Camp Pendleton, California, in support of U.S. military personnel and equipment. The contract is structured as a sources-sought solicitation and is exclusively set aside for total small business participation under FAR 19.5, with the NAICS code 811310. Required repairs include the provision and installation of key components such as a base frame, cylinders, and hosing to restore the equipment to full operational status. Contractors must conduct a mandatory site visit to validate repair needs, remove damaged parts from the building, install new components, and perform operational testing prior to final inspection. The work must comply with OSHA Standard 1910.23e, requiring fixed handrails at 48 inches high with a midrail and 4-inch kick plate. Additionally, the installer must be certified by White Systems to maintain warranty validity. Base access is required to perform the work, and all activities must be conducted in accordance with military installation protocols. The Government Technical Point of Contact will be designated post-award to assist with technical clarification and problem resolution but holds no authority to modify contract terms or issue directives; only the Regional Contracting Office MCI-WEST in Camp Pendleton may approve changes. Quality acceptance is determined by the TPOC based on the contractor's quoted materials and the description of work provided at the time of solicitation, and no formal Quality Assurance Surveillance Plan is in place. The repair schedule begins after the contractor receives the necessary parts, with milestones including site visit, material furnishing, installation, and final inspection all marked as TBD. The contract does not specify delivery terms, payment details, period of performance, or total estimated value. Proposals must be submitted by the deadline of August 11, 2026, with primary point of contact for inquiries being Brandon Ruess at 760-725-8453 or brandon.ruess@usmc.mil. Steve Elggren is also listed as a point of contact for administrative coordination.
Commanding General

POSTED

about 20 hours ago

DEADLINE

in 20 days
View Details
NAICS: 811310
New
Federal
FA441826Q0079-FY26 841st Dock Fender Repair
Solicitation # FA441826Q0079
This solicitation, identified as FA441826Q0079, is a Firm-Fixed Price, Small Business Set-Aside under NAICS code 811310 for the repair of dock fender hardware at Joint Base Charleston, South Carolina, for the 841st Transportation Battalion. The contractor is responsible for supplying and installing marine-grade hardware including 22 swivel-eye end assemblies, 32 sets of 1-1/2” hot-dipped galvanized bolt-type shackles (reduced from 44), and 44 316 stainless steel cotter keys, all meeting Federal Specification RR-C-271D, Type IVB, Class 3, and compatible with existing 1-3/4” Grade 3 chain. The work involves removing and replacing fenders, specifically the first fender located at the southwest end of the dock adjacent to fuel lines, which requires water and boat access for repair; for all other fenders, boat use is at the contractor’s discretion. The government will assist in dockside movement and lifting of all fenders except the first one, but the contractor must provide 24 hours’ advance notice for coordination. The stated Period of Performance has been shortened from four weeks to two business days, and the contractor must submit a detailed schedule for fender delivery and repair timelines. The fender model specification is Seaguard 4x17 (SG 4.0 x 17.0). All work must comply with the Statement of Work and include site restoration and final inspection by the Civil Engineering Squadron and the 841st Transportation Battalion, with acceptance occurring at the delivery location. The solicitation requires all offerors to comply with stringent site visit protocols, including submitting completed JB CHS Form 111, company SAM UEI/CAGE code, and color scanned copies of valid Real ID or driver’s license paired with a passport for each attendee by July 27, 2026, to gain access to Joint Base Charleston. The site visit, scheduled for July 29, 2026, at 9:00 AM EST, must be attended in person at the designated visitors center; failure to comply results in denial of entry. Questions arising from the site visit must be submitted electronically by July 30, 2026, to the Contract Specialist. Proposals are due by August 10, 202
FA4418 628 Cons Pk

POSTED

about 20 hours ago

DEADLINE

in 9 days
View Details
NAICS: 811310
New
Federal
Engine Container Inpsection/Repair - amendment
Solicitation # N0018925QZ0980001
The solicitation N0018925QZ0980001, issued by NAVSUP Fleet Logistics Center Norfolk on behalf of the Department of Defense, seeks qualified small business contractors to perform inspection, maintenance, and repair services on F414 Engine Containers under an indefinite-delivery, indefinite-quantity (IDIQ) structure with a five-year ordering period from March 30, 2026, to March 29, 2030. Performance is centered at the Aviation Supply Office in Philadelphia, Pennsylvania, with final inspection and acceptance occurring at the government destination address. The contract requires compliance with detailed technical specifications outlined in military manuals and drawings, including AG-0830AC-000-MEB Work Packages 003 and 039, and mandates adherence to strict packaging, preservation, and marking standards such as MIL-D-16791 Type 1 detergent, MIL-D-3464 Type I desiccant, and DFARS 252.211-7003 for Item Unique Identification (UII) marking and IUID Registry registration. All work must meet a 100% inspection requirement with no rework and deliverables must be submitted with supporting documentation, including monthly progress reports and final technical reports. The solicitation is set aside for small businesses, with specific provisions for HUBZone and other socioeconomic categories, and requires offerors to submit electronic proposals in two volumes—non-price and price—limited to 15 pages for Volume I and submitted exclusively via email to Coleen Johnson by the deadline of January 9, 2026. Evaluation will be based on a trade-off process favoring technical merit over price, with equal weighting given to Performance Approach and Past Performance, each requiring at least an Acceptable and Satisfactory Confidence rating respectively. Contract administration follows WAWF invoicing procedures, and contractors must comply with a broad suite of FAR and DFARS clauses covering ethics, whistleblower protections, supply chain security, prohibited ByteDance applications, executive compensation reporting, cybersecurity practices aligned with NIST SP 800-171, and restrictions on subcontracting percentages for similarly situated small businesses. No contract value is specified due to the absence of pricing data, and payment details including the DoDAAC and ACRN will be finalized at award.
Navsup Flt Logistics Ctr Norfolk

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
Federal
NOTICE OF INTENT TO AWARD SOLE SOURCE - PlateBright Preventative Maintenance Support Services
Solicitation # 2031ZA26N00052
The Bureau of Engraving and Printing’s Office of Chief Procurement Officer intends to award a sole source Firm Fixed Price contract to Koenig & Bauer (K&B) Banknote Solutions for preventative maintenance support services on the PlateBright Intaglio Plate Cleaning Machine, critical to operations at the Eastern and Western Currency Facilities. The machine is used to clean proprietary printing plates that can only be obtained from K&B, justifying the sole source determination under FAR Subpart 6.302-1(a)(2)(ii)(b). The contract aims to ensure optimal machine performance, extend equipment lifespan, prevent unexpected failures, and maintain operational continuity through proactive diagnostic and maintenance procedures. No competitive solicitation will be issued, and this notice serves only to inform potential respondents of the agency’s intent. All feedback, capability statements, questions, or concerns must be submitted exclusively via email to Sonia Barnhill at Sonia.Barnhill@bep.gov no later than 3:00 PM Eastern Daylight Time on August 14, 2026. Respondents must be currently registered and active in the System for Award Management (SAM). The contracting office is located at 14th & C Streets SW, Washington, DC 20228. Costs associated with responding to this notice, including preparation of submissions, are borne entirely by the respondent and will not be reimbursed by the government. The solicitation will not be publicly posted, and the government retains full discretion to proceed without competition.
Office Of The Chief Procurement Officer

POSTED

about 20 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
TEE ASSEMBLY
Solicitation # N0010426QFG04
This contract, issued under solicitation N0010426QFG04 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, governs the supply of a specialized Tee Assembly designated as SPECIAL EMPHASIS material (Level I) for critical shipboard systems, where failure could result in catastrophic loss of life, vessel damage, or system failure. The product must strictly conform to Naval Sea Systems Command Drawing 845-2445109, with detailed requirements for material composition, including MIL-C-24679 Alloy C71500 for the Tee and QQ-N-281 Class A for the Plug, and mandates quantitative chemical and mechanical analysis for traceability. All components must be manufactured and inspected in accordance with a comprehensive set of military and international standards including MIL-STD-2035, MIL-STD-792, ISO-9001, and FED-STD-H28, with thread inspection requiring System 21 unless otherwise specified and no use of molybdenum disulfide lubricants permitted. The assembly requires a 1050 PSI hydrostatic test for three minutes with zero leakage or deformation, and all welding and brazing must follow approved procedures from S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with procedures and qualification data submitted for prior government approval. Electronic signatures are accepted for certification documents under strict controls, and all material must be permanently marked with traceable identifiers linked to certified test reports, with tags required for small or machined surfaces. Quality assurance is stringent and continuous, requiring full compliance with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662 for quality and calibration systems, subject to government audit at any time. The contractor must maintain traceability from raw material through all manufacturing and subcontracted processes, with certification documentation submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, using designated codes N50286 for ship-to, N39040 for inspect and accept, and email notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped without prior acceptance. All certifications must include a signed statement of full compliance without disclaimers
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336612
New
Federal
CONNECTOR,THRU-HULL
Solicitation # N0010426QFG24
This contract pertains to the procurement of a thru-hull connector assembly designated as special emphasis material (Level I) for use in critical shipboard systems, where failure could result in severe consequences including loss of life or vessel. The item must strictly comply with specification CPG 1025 and associated drawings, with rigorous controls over material composition, welding, inspection, and traceability. All certified components—such as the penetrator body, cover, nut, and washers—must meet QQ-N-286 or QQ-N-281 specifications with mandatory chemical and mechanical testing, and each unit must be traceable via unique markings tied to certification data. First article testing is required, with one unit to be delivered to Portsmouth Naval Shipyard for government evaluation, and no production welding may proceed without prior approval of qualified procedures and qualification records. Material must be sourced, processed, and handled under a documented quality system conforming to ISO-9001, ISO-10012, or MIL-I-45208, with all nonconformances, waivers, and deviations requiring explicit written approval from the Contracting Officer. Certification documentation, including test reports and weld records, must be submitted electronically via WAWF with specific routing to N50286, N39040, and PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no material may be shipped until formal acceptance is granted. The contract mandates complete traceability from raw material through final assembly, with electronic signatures accepted for certifications, stringent prohibitions against molybdenum disulfide lubricants, and a ban on mercury-containing materials. All subcontractors must be vetted, audited, and bound by the same stringent quality and documentation standards as the prime contractor. The contract was issued under Emergency Acquisition Flexibilities and carries a DO priority rating under the Defense Priorities and Allocations System, with final delivery required within 365 days of contract effective date, and all certification submissions due no later than 20 days before scheduled delivery.
Boat Building

POSTED

about 20 hours ago

DEADLINE

in 24 days
View Details
NAICS: 336612
New
Federal
BOX ASSEMBLY,OIL DI
Solicitation # N0010426QTB89
This contract pertains to the repair of the BOX ASSEMBLY, OIL DI under a fixed-price arrangement with a required Repair Turnaround Time of 650 days, subject to penalties for delays not caused by the Government, with pricing reductions applied per unit per month until a specified maximum is reached. All repairs must adhere to MIL-STD-130 marking requirements and be certified by the American Bureau of Shipping, with original signed certificates delivered alongside each item and electronic reports submitted in PDF format to the MSC in Norfolk. The contractor must operate under a validated quality assurance system, maintain complete inspection records for 365 days post-delivery, and comply with all technical directives, drawings, and approved repair standards. No substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, classified under specific Code designations for part changes. The contract is issued under Emergency Acquisition Flexibilities, encouraging accelerated delivery, with all freight FOB Origin and handled by the Navy per the Commercial Asset Visibility Statement of Work. The contractor must report all asset transactions in CAV within five business days of physical receipt, reflecting actual dates in the system. The offer must include unit and total pricing, test-and-evaluation fees for beyond-repair assets, and comparative new unit pricing and delivery timelines. The Government reserves the right to exercise an option to increase quantities at the original unit price. The contractor must be an authorized distributor of the original manufacturer, and all documentation provided by the Navy carries distribution restrictions outlined in OPNAVINST 5510.1. Compliance with Buy American provisions, cybersecurity maturity model requirements, small business subcontracting goals, veteran and disabled worker equity, and the mandatory use of Workflow Pro Assist Module are all binding conditions. The solicitation number is N0010426QTB89 with a response deadline of August 31, 2026, and the primary point of contact is Alison E. Harper at the Mechanicsburg, PA office.
Boat Building

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
SCREW,CAP,HEXAGON H
Solicitation # N0010426QEC21
The contract pertains to the procurement of a hexagon cap screw under solicitation N0010426QEC21, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of August 31, 2026. It incorporates a comprehensive set of technical, quality, and administrative requirements governed by a hierarchy of documents led by the Individual Repair Part Ordering Data (IRPOD), followed by the contract schedule, terms and conditions, and referenced military specifications. The contractor must comply strictly with specified revisions of drawings, standards, and technical data obtained through the secure logistics website, and any deviation from requirements requires prior written approval from the Contracting Officer with full technical justification, including evaluations demonstrating no adverse impact on form, fit, or function. Quality assurance is dictated by the IRPOD, requiring the contractor to maintain inspection records accessible to the government throughout and beyond contract performance. Packaging must adhere to MIL-PRF-23199 and related cleanliness standards, with mandatory use of heat-sealed envelopes for parts subject to cleaning controls, and the prohibition of mercury or mercury-containing compounds in any component. All shipments require government authorization prior to dispatch, and delivery documentation including certified test and inspection reports must be submitted in separate packages for each unique contract line item. The contract mandates submission of pre-manufacturing procedure packages within 45 days of award and final inspection reports by the end of contract performance, using specific DD Form 1423 sequences and following exact formatting and distribution guidelines. The contract enforces strict cybersecurity, small business set-aside, and national defense prioritization compliance, with additional requirements for Workflow Pro (WFP) Mod Assist module usage and electronic invoice submission via Wide Area Workflow. Transportation is governed by sea freight protocols, and all contractual documents are deemed issued upon electronic transmission, with bid validity periods to be specified by the offeror. The place of performance is not explicitly defined, but all technical documentation must be sourced through official channels, and distribution of sensitive material is restricted per DoD distribution statement codes. The contractor must provide item identification and valuation data as specified, with pricing structured according to data groups defined in the DD Form 1423, and all technical submissions must align with the latest revisions of cited documents. No charge may be applied where data is commercially developed and requires minimal adaptation. The contract explicitly prioritizes compliance with delivery schedules and technical standards for critical repair parts, and non-conforming submissions without proper justification will be returned without review.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
70--DISPLAY,LIQUID CRYS, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QLC23
This contract pertains to the repair and modification of a liquid crystal display component under a firm-fixed-price structure, issued through an urgent procurement action leveraging Emergency Acquisition Flexibilities. The work is governed by strict compliance with technical standards, including MIL-STD-130 for marking, adherence to the manufacturer’s original specifications, and mandatory use of the Commercial Asset Visibility (CAV) system to track asset receipt, repair progress, and delivery timelines. The contractor must meet a defined Repair Turnaround Time (RTAT), with penalties applied per unit per month for delays, and all repairs must be inspected and accepted by the Defense Contract Management Agency before shipment. Payment is contingent upon successful Government inspection and CAV reporting, and all transportation is managed by the Navy through CAV or Proxy CAV channels. The contract requires full documentation of repair processes, records retention for 365 days post-delivery, and strict configuration control for any design or part substitutions, which require prior written approval. The contractor must be an authorized distributor of the original manufacturer, with proof provided during bidding, and must comply with Buy American provisions, cybersecurity maturity level requirements, and small business subcontracting obligations. Any asset determined beyond repair (BR) triggers a negotiated fee not to exceed a specified amount, contingent on DCMA Quality Assurance verification and proper disposition procedures per DFARS. The repair must be performed at the contractor’s facility, with final acceptance tied to CAV system timestamps and physical receipt. All communications and modifications must go through the designated Procurement Contracting Officer, with DCMA acting as the administrative oversight body. The solicitation enforces zero-cost acceleration of delivery, mandates CAV reporting, and requires detailed pricing, RTAT, and new unit cost comparisons in the response. The contract is issued under a Basic Ordering Agreement framework, with BOA terms prevailing in case of conflict. The contract data identifies the issuing agency as NAVSUP Weapon Systems Support in Mechanicsburg, PA, with a response deadline of August 31, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
CARD CAGE ASSY
Solicitation # N0010426QTB86
The solicitation seeks repair services for the CARD CAGE ASSY under a firm-fixed-price contract with a required Repair Turnaround Time of 229 days, though accelerated delivery is encouraged. The Government requires full compliance with MIL-STD-129 for marking and MIL-STD-2073 for packaging, and mandates strict adherence to approved technical procedures, drawings, and manufacturer directives. All repair work must meet operational and functional specifications tied to the CAGE code 04804 and reference number 6D29167G01. Any design, material, or part number changes require written approval and classification under specific Code designations, with Code 1 exceptions permitted for identical part substitutions. Mercury contamination is strictly prohibited; the contractor must ensure no metallic mercury or mercury compounds are used in manufacturing or testing, and any intentional use requires prior written approval, detailed justification, and inclusion of a warning plate. The contractor is responsible for all inspection and testing in accordance with original manufacturer specifications and must maintain complete records for 365 days after final delivery. Government Source Inspection is mandatory, and all freight is FOB Origin, with the Navy handling logistics. The contract includes a mandatory option to increase quantities at the original unit price, exercisable by the Contracting Officer within FAR-specified timeframes. Compliance with Buy American, small business subcontracting, cybersecurity maturity certification, and the mandatory use of Workflow Pro (WFP) Mod Assist Module are required. The contractor must submit a quote detailing unit and total price, RTAT, and comparison to new unit price and lead time. Non-compliance with the required RTAT must be explicitly explained. The awardee must provide CAGE codes for the facility performing the repair and for inspection, with the Government retaining rights to audit quality records and inspect work. The contractor must also ensure subcontractors adhere to all terms, including mercury safety and inspection obligations. All documentation and compliance must be submitted via the designated Navy point of contact, Rebecca A. Rainey, and the contract is governed by a range of applicable Department of Defense directives, deviation notices, and procedural standards issued through 2026.
Bare Printed Circuit Board Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QLC22
This contract pertains to the repair and modification of the MOTOR, ALTERNATING C, issued under Emergency Acquisition Flexibilities with a firm-fixed-price structure. The procurement is conducted through a Basic Ordering Agreement (BOA), incorporating its terms unless superseded by this order. The contractor must adhere to strict repair turnaround time (RTAT) requirements, with performance measured from physical receipt of the asset at their facility, as recorded in the Commercial Asset Visibility (CAV) system. Failure to meet the RTAT results in a monthly price reduction per unit and may trigger termination for default. Government Source Inspection (GSI) by DCMA is mandatory before shipment, and payment is contingent upon proper inspection and CAV reporting. All transportation is handled by the Navy, and contractors must coordinate pick-up via ATAC. The item must be repaired in compliance with manufacturer specifications, MIL-STD-130 marking standards, and approved technical documentation, with no substitutions allowed without prior written approval. Any asset deemed beyond repair requires formal documentation and triggers a negotiated non-to-exceed fee for evaluation costs. The contract requires full compliance with Buy American provisions, cybersecurity maturity certification, small business subcontracting, and other federal acquisition flow-down clauses. Contractors must submit a detailed quote including unit price, total price, and RTAT, along with a comparison to the cost and lead time of purchasing a new unit. Records of all inspections and repairs must be maintained for at least one year post-delivery, and all documentation must account for distribution restrictions, especially those involving NOFORN or export-controlled data. The awardee’s CAGE code and performance location must be accurately provided, with inspection and acceptance occurring at the designated facility. The Contracting Officer retains authority to definitize estimated prices through modification, and all modifications must be issued only by authorized entities with proper notification to all parties. Failure to respond within 30 days of contract issuance requires immediate contact with the designated point of contact. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. The solicitation remains open through August 31, 2026, with delivery and performance obligations tied directly to timely, compliant execution under Navy-specific logistics and quality protocols.
Motor and Generator Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
WASHER,SPHERICAL SE
Solicitation # N0010426QAC92
This contract pertains to the manufacture of a WASHER, SPHERICAL SE with part number CL-7-SW and CAGE code 99862, issued under solicitation N0010426QAC92 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The offer deadline is August 17, 2026, and the contract is set aside for small business participation, with full compliance required under applicable small business programs and cybersecurity maturity certification standards effective November 2025. Delivery must be completed within 90 days, and the item must adhere to strict military standards including MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. Government source inspection per FAR 52.246-2 is mandatory, and the contractor bears full responsibility for ensuring quality and compliance, even in the absence of specific inspection clauses. Records of all inspection activities must be retained for 365 days after final delivery. The contract prohibits substitution of the specified item unless prior testing and formal approval are obtained from NAVICP-MECH, as it is governed by a Source Control Drawing that only authorizes the listed vendor. Proposals for alternate items require full technical documentation for government review. All contractual documents are deemed issued upon electronic transmission, and payments will be processed through the Wide Area Workflow system with inspection and acceptance occurring at the source. The contractor must also comply with national defense priority ratings, security prohibitions, and cybersecurity requirements, and must submit any engineering changes, deviations, or waivers in strict accordance with MIL-STD-973. Commercial brand name specifications apply, and any proposed substitute must meet all performance and technical criteria without exception.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 17 days
View Details
NAICS: 332919
New
Federal
VALVE, NEEDLE
Solicitation # N0010426QFG30
This contract pertains to the procurement of a needle valve designated as special emphasis material (Level I/SUBSAFE) for use in a critical shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel itself. The item must strictly conform to Naval Ship System Command drawing 7067139 and associated specifications, including ASTM-B150 Alloy UNS C63200 in Temper TQ50 or TQ55, with mandatory quantitative chemical and mechanical analysis and full traceability from raw material through final assembly. All materials require permanent, legible traceability markings tied directly to certified test reports, and any processing altering material properties necessitates re-certification with updated documentation. Welding and brazing operations must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000 standards, with all procedures and personnel qualifications submitted for prior Navy approval, and a certificate of compliance is required for every weld filler metal lot. Thread inspection must follow FED-STD-H28 System 21 unless otherwise prescribed, and O-ring sealing surfaces must be inspected using the General Acceptance Criteria (GAC) unless specific drawing criteria override it. The contractor must maintain an ISO-9001 quality system with ISO-10012 and ISO/IEC 17025 calibration compliance, subject to government oversight and audit at the source. All certification data, including non-destructive testing and material analyses, must be submitted electronically via ECDS at least 20 days prior to delivery and reviewed and accepted by Portsmouth Naval Shipyard before shipment, with final delivery due within 365 days of contract effectiveness. The contract is a DO-rated national defense priority order issued under Emergency Acquisition Flexibilities and is a total small business set-aside with mandatory compliance with Buy American provisions and prohibition of mercury contamination. Subcontractors are subject to stringent oversight, including requirement for similar quality controls and traceability, and all documentation must be submitted in electronic format using Adobe PDF. Any deviations or waivers require formal review and approval by the Contracting Officer and must be classified as critical, major, or minor based on safety and performance impact. Final inspection requires 100% verification of traceability, certification completeness, and material conformity, with lot acceptance based on zero defects.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 24 days
View Details
NAICS: 335311
New
Federal
CABLE ASSY,MAI
Solicitation # N0010426QXB46
This contract solicitation, identified as N0010426QXB46, is for the procurement of a CABLE ASSY,MAI under a Firm-Fixed Price arrangement, with all quotations required to be submitted electronically to russell.w.kreider.civ@us.navy.mil by the deadline of August 14, 2026. The award is contingent upon the vendor being an authorized distributor of the original equipment manufacturer, requiring official documentation confirming authorization, and strict adherence to Item Unique Identification (IUID) requirements per DFARS 252.211-7003 and MIL-STD-130 Rev N for physical marking. The contract specifies FOB Origin delivery, mandatory compliance with MIL-STD-2073 packaging standards, and Government Source Inspection, with all supplies subject to inspection and acceptance in accordance with the terms outlined. The contractor must provide a detailed cost breakdown including unit price, total price, lead time, CAGE codes for award and inspection, and a quotation expiration date valid for at least 90 days, and must not make any design, material, or part number changes without prior written approval from the contracting officer, using designated change codes to categorize modifications. The contract imposes comprehensive quality assurance obligations, requiring the contractor to maintain complete and accessible inspection records for 365 days after final delivery and to ensure full compliance with all technical specifications without reliance on sampling to justify defective material submission. Alterations to the part must be flagged using specific design change codes ranging from simple part number updates to non-interchangeable redesigns, with supporting drawings and explanations required for evaluation. All referenced documents must be obtained through authorized DoD sources, with special procedures outlined for restricted documents such as NOFORN or classified materials, which require formal request processes. The solicitation emphasizes that only authorized distributors will be considered for award, and failure to submit proof of authorization disqualifies the offer. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with all communications and submissions directed to the designated point of contact.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAE5
This contract pertains to the manufacture and delivery of a CIRCUIT CARD ASSEMBLY under emergency acquisition flexibilities, with immediate bilateral execution upon contractor acceptance. The item must conform to stringent military standards including MIL-STD-973 for configuration control, MIL-STD-130 for item marking, and ANSI/ESD S20.20 for electrostatic discharge protection. All components must be mercury-free and free from contamination, with explicit prohibitions on mercury use unless prior written approval is obtained through detailed documentation. The contractor is responsible for ensuring quality through an inspection system compliant with MIL-I-45208 and must maintain complete inspection records for four years after final delivery. Configuration changes require explicit Government approval, and only approved drawing revisions may be used, with notification required for any prior authorizations carried over from previous contracts. The item must be produced under a DPAS-rated order and delivered with proper packaging per MIL-STD-2073. The contractor must be the Original Equipment Manufacturer or provide a signed letter of authorization from the OEM if acting as a distributor. All materials must be labeled with the specified CAGE code 96169 and reference number 263501706-001CE. Shipping and receiving must follow Wide Area Workflow payment instructions and require a standalone receiving report. Warranty is one year from delivery date. Compliance with security prohibitions, annual certifications, and mandatory use of Workflow Pro’s Assist Module is required. The contract is administered by NAVICP-MECH in Mechanicsburg, PA, with sole point of contact at the provided Navy email address. Solicitation responses are due by September 9, 2026, under NAICS code 334412, and all contractual documents are deemed issued upon electronic transmission.
Bare Printed Circuit Board Manufacturing

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
Federal
TRANSMITTER,INFRARE
Solicitation # N0010426QXB63
This contract pertains to the procurement of the TRANSMITTER, INFRARED for the 5"/54-Caliber Gun Mount MK45, with requirements strictly defined by multiple drawings, primarily drawing 5181698 and associated technical documentation. The supplier must comply with comprehensive quality and manufacturing standards, including ISO 9001, MIL-STD-130 for marking, MIL-STD-973 for configuration control with specific tailoring, and adherence to numerous military and industry specifications such as MIL-STD-202, MIL-STD-883, MIL-PRF-39003, and others. The item must be sourced from a Government Qualified Products List (QPL) supplier, and 100% production testing is mandatory, with results subject to approval by the DCMC-QAR before shipment. All deliverables must be shipped FOB Origin, packaged per MIL-STD-2073, and accompanied by approved test procedures and reports. The solicitation mandates a Firm-Fixed Price quotation with minimum 90-day expiration, requiring detailed cost breakdowns, lead times, CAGE codes, and proof of authorized distributor status if not the manufacturer, confirmed via official OEM correspondence. Electronic submissions must be sent to stephanie.r.perez7.civ@us.navy.mil, and the evaluation will prioritize price, past performance, and supplier risk under DFARS 252.204-7024. All offerors must comply with Buy American provisions, Small Business Subcontracting Plan mandates, Security Prohibitions, and mandatory use of Workflow Pro (WFP) Assist Module. The Government retains inspection rights, requires records retention for 365 days after delivery, and enforces strict configuration control with prior authorization for any engineering changes. Only authorized distributors may be considered, and all technical inquiries must follow prescribed submission formats and channels. The response deadline is July 24, 2026, and award is contingent on bilateral acceptance.
Other Communications Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 21 days
View Details