Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

43--PLUNGER PUMP, IN REPAIR/MODIFICATION OF

Active
N0010426QYAC7Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Government intends to procure three plunger pumps, NIIN 016037073, part number 70-2029M, for repair and modification under emergency acquisition authority, sourced exclusively from Integrated Procurement Technologies, the original equipment manufacturer and sole recognized supplier with the proprietary data and rights required to produce this component. No technical drawings or data are available to the Government, and no alternative sources can fulfill the requirement, justifying a sole source award under 10 U.S.C. 2304(c)(1) and FAR 6.302. The procurement is not a total small business set-aside despite the listing, and the NAICS code is 333996; Buy American provisions and UID marking requirements will apply. The contract duration is one year, with options for potential extension, and all solicitations will be conducted electronically through NECO without hard copies or phone inquiries. The solicitation is scheduled for issuance on 14 August 2026 with a response deadline of 14 September 2026 and an anticipated award date of 29 September 2026. Proposals received within 45 days of the notice will be considered for potential competitive sourcing, though the Government currently anticipates awarding to the sole approved vendor. Interested parties must submit capability statements by email to Jessica Grzywna at the designated Navy address.

General Info

Sole source procurement of three plunger pumps from Integrated Procurement Technologies under emergency authority, Buy American, UID, one-year term.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

PA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA

Full Description

Show more
NSN 7H-4320-016037073, REF NR 70-2029M, QTY 3 EA, DELIVER TO W25G1U, W1A8 DLA DISTRIBUTION, NEW CUMBERLAND, PA 17070-5002, INDUCTION NIIN IS 7H, 4320, 016037073, PLUNGER PUMP, 19625PC4. NAVSUP Weapon Systems Support (NAVSUP WSS) Mechanicsburg intends to solicit on a sole source basis with Integrated Procurement Technologies (4K0V2) for the Repair of Items Below: NOMENCLATURE NIIN PART NUMBER AIRCRAFT PLUNGER PUMP 016037073 70-2029M SUB ENGINEERING/DIESEL SYSTEMS. There are no drawings/data available. This source is the Original Equipment Manufacturer (OEM) and the only known source for providing spares support of the above spares part. The Government does not own the data or the rights to the data needed to purchase this part from additional sources. All responsible sources may submit a capability statement, proposal, or quotation, which shall be considered by the agency. The Government intends to solicit andnegotiate with Only One Responsible Source and No Other Supplies or Services Will Satisfy Agency Requirements. Source Authority: 10 U.S.C. 2304(c)(1), as supplemented by FAR 6.302. Source Approval Statement applies to this NSN. The approved sources for this material are listed above and it is expected that award will be made to this firm. Any firm which is not already approved to manufacture this material must submit a Source Approval Request, SAR. This procurement will not be delayed to wait for a SAR approval. NAICS CODE: 333996 PSC: 4320 Contract Duration will be 1 year. UID: UID requirements will apply. Buy American Clauses will apply and will be posted in the solicitation. The Government intends to acquire these supplies using the provisions, clauses and procedures prescribed in FAR Part 15. Based upon market research, the Government is not using the policies contained in FAR Part 12, Acquisition of Commercial Items, in its solicitation for the described supplies. Interested persons may identify to the contracting officer their interest and capability to satisfy the Government's requirement with a commercial item WITHIN 15 days of this notice. This NIIN is an emergency acquisition NIIN. This order will be issued pursuant to Emergency Acquisition Authority. Options will be added. This notice of intent is not a request for competitive proposals. However, all proposals received within 45 days after date of publication of this synopsis will be considered by the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. This procurement is not a Total Small Business Set-Aside. Electronic procedures will be used for this solicitation. RFP/Solicitation will be posted to NECO. The approximate issue date for the Solicitation/RFP will be 14 AUG 2026 with an approximate response/closing date of 14 SEP 2026. No telephone requests will be honored and no hard copies will be mailed out. Anticipated award date is 29 SEP 2026. Interested organizations may submit their capabilities and qualifications to perform the effort by email Jessica Grzywna, jessica.t.grzywna.civ@us.navy.mil.

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTR
Solicitation # SPE7M4-26-T-270K
The contract is for the procurement of four centrifugal pump impellers, identified by NSN 4320012591587 and part number 657C1313-0950B517A from CIRCOR NAVAL SOLUTIONS LLC, under solicitation SPE7M4-26-T-270K. Delivery is required within three days of order direction, with an original required delivery date of October 27, 2026, and an earliest need ship date of August 4, 2026. All items must be delivered FOB destination to the receiving warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-P-10603 for preservation and MIL-STD-2073-1E for packaging, with palletization following DLA’s RP001 requirements. Marking must adhere to MIL-STD-129, with no special marking required beyond standard government labeling. Preservation method is designated as ZZ, which triggers the use of Level A preservation as defined in the applicable commodity specification. The item is classified as a critical application item and must not contain or come into direct contact with mercury or mercury compounds, except for enumerated functional uses such as batteries, lamps, sensors, or instrument components specified by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates numerous Federal Acquisition Regulation clauses, including those addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguarding, and prohibition of hexavalent chromium. Deviations apply to several clauses, including 52.222-36, 52.222-50, 52.223-23, and 52.240-93, with specific waivers and alternates authorized. The FAR 52.246-2 clause governs inspection of supplies, and the FAR 52.249-8 clause addresses default provisions. Subcontracting is governed by FAR 52.244-6 and its alternate version 252.244-7999, both subject to deviation. Electronic invoicing via WAWF is mandatory, and all offers must be submitted through the DLA Internet
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333996
New
Federal
Detroit Powerhouse Transformer Oil Pumps and Motors Purchase
Solicitation # W9127N26QA135
The U.S. Army Corps of Engineers, Portland District, is soliciting quotes for the purchase of twelve centrifugal pumps with induction motors to replace the original Allis Chalmers XGHT units at the Detroit Dam Transformer powerhouse in Mill City, Oregon. This solicitation, identified as W9127N26QA135, is issued as a combined synopsis and solicitation under FAR Part 12 and is exclusively set aside for small businesses under NAICS Code 333996, with a size standard of 1,250 employees. All offerors must be registered in SAM.gov to be eligible for award. Proposed solutions must match the technical specifications outlined in the transformer drawings and purchase description, with quotes submitted via email to Raymie Briddell and Darrell Hutchens no later than 4:00 PM PST on August 13, 2026. Questions must be submitted in writing by 2:00 PM PST on August 5, 2026, and responses will not be provided via phone. Each quotation must include the UEI number, CAGE code, contractor name, confirmation of Net 30 payment terms, point of contact details, lead time, an expiration date at least 30 days after the closing, and complete technical drawings or schematics for both pumps and motors. Failure to include any required information will result in non-conformance and disqualification. Deliveries must be made FOB destination to Detroit Dam between 7:00 AM and 4:00 PM Monday through Thursday, excluding federal holidays, with the contractor bearing all shipping costs. The contract will be awarded on a firm fixed-price basis, and all provisions and clauses referenced are effective as of March 13, 2026, under Federal Acquisition Circular 2026-01.
W071 Endist Portland

POSTED

about 21 hours ago

DEADLINE

in 13 days
View Details
NAICS: 333996
New
DIBBS
RING, WEARING
Solicitation # SPE7M1-26-T-242D
The contract pertains to the procurement of RING, WEARING with the NSN 4320015277511, requiring a quantity of three units to be delivered within 193 days from the contract award date. All items must comply with DLA packaging requirements as defined in MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes required. Packaging must use the specified preservation methods including dry sealing, and be packaged in unit containers type D3, with intermediate containers type E6. The delivery is FOB origin and inspection and acceptance occur at the destination. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or chemical reagents specifically authorized by NAVSEA; portable lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for applicable technical specifications, and compliance with the version in effect on the solicitation issue date is mandatory. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a need ship date set for February 20, 2027, and no variance in quantity is permitted. The contracting office is under the Department of Defense, Maritime Supply Chain, and inquiries should be directed to Michael Reese.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
PUMP UNIT, CENTRIFUG
Solicitation # SPE7M1-26-T-242E
The contract is for the procurement of three centrifugal pump units with part number ABZCH2-325-250-GM5G17420 and NSN 4320015453034, designated as a critical application item and a Navy field-level reparable requiring configuration control per MIL-STD-973. The supplier, AMPCO PUMPS COMPANY LLC, must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including prohibitions on class I ozone-depleting chemicals and mandatory use of approved substitutes. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling standards, with palletization governed by DLA’s packaging requirements, and all units must be delivered FOB origin with no variance in quantity. Inspection and acceptance occur at the destination. Delivery is required within 195 days of contract award, with a specified ship date of February 22, 2027, and all units must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The procurement is issued under solicitation SPE7M1-26-T-242E, which was released as a Women-Owned Small Business set-aside with a NAICS code of 333996, and the unit of issue is each. The contract enforces strict compliance with DLA’s standardized procurement protocols, including transportation guidelines and mandatory documentation referencing the DLA Master List, ensuring alignment with federal acquisition standards and environmental compliance.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 333996
New
DIBBS
IMPELLER, PUMP, CENTR
Solicitation # SPE7M1-26-T-241R
This contract pertains to the procurement of a centrifugal pump impeller, identified by NSN 4320-01-497-0739 and part number 14608N18, with a requirement for one unit to be delivered within 704 days of contract award. The item is classified as a critical application component and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. Strict prohibitions apply to the use of ozone-depleting chemicals and intentional incorporation of mercury or mercury-containing compounds, except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, or weapons systems specifically authorized by NAVSEA, with additional containment requirements for portable mercury-containing devices. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA packaging guidelines. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The contract enforces a zero variance in quantity and requires the item to be shipped by July 15, 2028, with the original required delivery date aligned to the same date. The contracting office is the Department of Defense’s Maritime Supply Chain, and inquiries should be directed to Michael Reese at the provided contact information.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

NAICS: 332919
New
Federal
TEE ASSEMBLY
Solicitation # N0010426QFG04
This contract, issued under solicitation N0010426QFG04 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, governs the supply of a specialized Tee Assembly designated as SPECIAL EMPHASIS material (Level I) for critical shipboard systems, where failure could result in catastrophic loss of life, vessel damage, or system failure. The product must strictly conform to Naval Sea Systems Command Drawing 845-2445109, with detailed requirements for material composition, including MIL-C-24679 Alloy C71500 for the Tee and QQ-N-281 Class A for the Plug, and mandates quantitative chemical and mechanical analysis for traceability. All components must be manufactured and inspected in accordance with a comprehensive set of military and international standards including MIL-STD-2035, MIL-STD-792, ISO-9001, and FED-STD-H28, with thread inspection requiring System 21 unless otherwise specified and no use of molybdenum disulfide lubricants permitted. The assembly requires a 1050 PSI hydrostatic test for three minutes with zero leakage or deformation, and all welding and brazing must follow approved procedures from S9074-AQ-GIB-010/248 or S9074-AR-GIB-010A/278, with procedures and qualification data submitted for prior government approval. Electronic signatures are accepted for certification documents under strict controls, and all material must be permanently marked with traceable identifiers linked to certified test reports, with tags required for small or machined surfaces. Quality assurance is stringent and continuous, requiring full compliance with ISO-9001 and ISO-10012 or MIL-I-45208 and MIL-STD-45662 for quality and calibration systems, subject to government audit at any time. The contractor must maintain traceability from raw material through all manufacturing and subcontracted processes, with certification documentation submitted via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, using designated codes N50286 for ship-to, N39040 for inspect and accept, and email notification to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL. No material may be shipped without prior acceptance. All certifications must include a signed statement of full compliance without disclaimers
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336612
New
Federal
CONNECTOR,THRU-HULL
Solicitation # N0010426QFG24
This contract pertains to the procurement of a thru-hull connector assembly designated as special emphasis material (Level I) for use in critical shipboard systems, where failure could result in severe consequences including loss of life or vessel. The item must strictly comply with specification CPG 1025 and associated drawings, with rigorous controls over material composition, welding, inspection, and traceability. All certified components—such as the penetrator body, cover, nut, and washers—must meet QQ-N-286 or QQ-N-281 specifications with mandatory chemical and mechanical testing, and each unit must be traceable via unique markings tied to certification data. First article testing is required, with one unit to be delivered to Portsmouth Naval Shipyard for government evaluation, and no production welding may proceed without prior approval of qualified procedures and qualification records. Material must be sourced, processed, and handled under a documented quality system conforming to ISO-9001, ISO-10012, or MIL-I-45208, with all nonconformances, waivers, and deviations requiring explicit written approval from the Contracting Officer. Certification documentation, including test reports and weld records, must be submitted electronically via WAWF with specific routing to N50286, N39040, and PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no material may be shipped until formal acceptance is granted. The contract mandates complete traceability from raw material through final assembly, with electronic signatures accepted for certifications, stringent prohibitions against molybdenum disulfide lubricants, and a ban on mercury-containing materials. All subcontractors must be vetted, audited, and bound by the same stringent quality and documentation standards as the prime contractor. The contract was issued under Emergency Acquisition Flexibilities and carries a DO priority rating under the Defense Priorities and Allocations System, with final delivery required within 365 days of contract effective date, and all certification submissions due no later than 20 days before scheduled delivery.
Boat Building

POSTED

about 21 hours ago

DEADLINE

in 23 days
View Details
NAICS: 336612
New
Federal
BOX ASSEMBLY,OIL DI
Solicitation # N0010426QTB89
This contract pertains to the repair of the BOX ASSEMBLY, OIL DI under a fixed-price arrangement with a required Repair Turnaround Time of 650 days, subject to penalties for delays not caused by the Government, with pricing reductions applied per unit per month until a specified maximum is reached. All repairs must adhere to MIL-STD-130 marking requirements and be certified by the American Bureau of Shipping, with original signed certificates delivered alongside each item and electronic reports submitted in PDF format to the MSC in Norfolk. The contractor must operate under a validated quality assurance system, maintain complete inspection records for 365 days post-delivery, and comply with all technical directives, drawings, and approved repair standards. No substitutions or design changes are permitted without prior written approval from the NAVICP-MECH Contracting Officer, classified under specific Code designations for part changes. The contract is issued under Emergency Acquisition Flexibilities, encouraging accelerated delivery, with all freight FOB Origin and handled by the Navy per the Commercial Asset Visibility Statement of Work. The contractor must report all asset transactions in CAV within five business days of physical receipt, reflecting actual dates in the system. The offer must include unit and total pricing, test-and-evaluation fees for beyond-repair assets, and comparative new unit pricing and delivery timelines. The Government reserves the right to exercise an option to increase quantities at the original unit price. The contractor must be an authorized distributor of the original manufacturer, and all documentation provided by the Navy carries distribution restrictions outlined in OPNAVINST 5510.1. Compliance with Buy American provisions, cybersecurity maturity model requirements, small business subcontracting goals, veteran and disabled worker equity, and the mandatory use of Workflow Pro Assist Module are all binding conditions. The solicitation number is N0010426QTB89 with a response deadline of August 31, 2026, and the primary point of contact is Alison E. Harper at the Mechanicsburg, PA office.
Boat Building

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332722
New
Federal
SCREW,CAP,HEXAGON H
Solicitation # N0010426QEC21
The contract pertains to the procurement of a hexagon cap screw under solicitation N0010426QEC21, issued by NAVSUP Weapon Systems Support Mech, with a response deadline of August 31, 2026. It incorporates a comprehensive set of technical, quality, and administrative requirements governed by a hierarchy of documents led by the Individual Repair Part Ordering Data (IRPOD), followed by the contract schedule, terms and conditions, and referenced military specifications. The contractor must comply strictly with specified revisions of drawings, standards, and technical data obtained through the secure logistics website, and any deviation from requirements requires prior written approval from the Contracting Officer with full technical justification, including evaluations demonstrating no adverse impact on form, fit, or function. Quality assurance is dictated by the IRPOD, requiring the contractor to maintain inspection records accessible to the government throughout and beyond contract performance. Packaging must adhere to MIL-PRF-23199 and related cleanliness standards, with mandatory use of heat-sealed envelopes for parts subject to cleaning controls, and the prohibition of mercury or mercury-containing compounds in any component. All shipments require government authorization prior to dispatch, and delivery documentation including certified test and inspection reports must be submitted in separate packages for each unique contract line item. The contract mandates submission of pre-manufacturing procedure packages within 45 days of award and final inspection reports by the end of contract performance, using specific DD Form 1423 sequences and following exact formatting and distribution guidelines. The contract enforces strict cybersecurity, small business set-aside, and national defense prioritization compliance, with additional requirements for Workflow Pro (WFP) Mod Assist module usage and electronic invoice submission via Wide Area Workflow. Transportation is governed by sea freight protocols, and all contractual documents are deemed issued upon electronic transmission, with bid validity periods to be specified by the offeror. The place of performance is not explicitly defined, but all technical documentation must be sourced through official channels, and distribution of sensitive material is restricted per DoD distribution statement codes. The contractor must provide item identification and valuation data as specified, with pricing structured according to data groups defined in the DD Form 1423, and all technical submissions must align with the latest revisions of cited documents. No charge may be applied where data is commercially developed and requires minimal adaptation. The contract explicitly prioritizes compliance with delivery schedules and technical standards for critical repair parts, and non-conforming submissions without proper justification will be returned without review.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
70--DISPLAY,LIQUID CRYS, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QLC23
This contract pertains to the repair and modification of a liquid crystal display component under a firm-fixed-price structure, issued through an urgent procurement action leveraging Emergency Acquisition Flexibilities. The work is governed by strict compliance with technical standards, including MIL-STD-130 for marking, adherence to the manufacturer’s original specifications, and mandatory use of the Commercial Asset Visibility (CAV) system to track asset receipt, repair progress, and delivery timelines. The contractor must meet a defined Repair Turnaround Time (RTAT), with penalties applied per unit per month for delays, and all repairs must be inspected and accepted by the Defense Contract Management Agency before shipment. Payment is contingent upon successful Government inspection and CAV reporting, and all transportation is managed by the Navy through CAV or Proxy CAV channels. The contract requires full documentation of repair processes, records retention for 365 days post-delivery, and strict configuration control for any design or part substitutions, which require prior written approval. The contractor must be an authorized distributor of the original manufacturer, with proof provided during bidding, and must comply with Buy American provisions, cybersecurity maturity level requirements, and small business subcontracting obligations. Any asset determined beyond repair (BR) triggers a negotiated fee not to exceed a specified amount, contingent on DCMA Quality Assurance verification and proper disposition procedures per DFARS. The repair must be performed at the contractor’s facility, with final acceptance tied to CAV system timestamps and physical receipt. All communications and modifications must go through the designated Procurement Contracting Officer, with DCMA acting as the administrative oversight body. The solicitation enforces zero-cost acceleration of delivery, mandates CAV reporting, and requires detailed pricing, RTAT, and new unit cost comparisons in the response. The contract is issued under a Basic Ordering Agreement framework, with BOA terms prevailing in case of conflict. The contract data identifies the issuing agency as NAVSUP Weapon Systems Support in Mechanicsburg, PA, with a response deadline of August 31, 2026.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334412
New
Federal
CARD CAGE ASSY
Solicitation # N0010426QTB86
The solicitation seeks repair services for the CARD CAGE ASSY under a firm-fixed-price contract with a required Repair Turnaround Time of 229 days, though accelerated delivery is encouraged. The Government requires full compliance with MIL-STD-129 for marking and MIL-STD-2073 for packaging, and mandates strict adherence to approved technical procedures, drawings, and manufacturer directives. All repair work must meet operational and functional specifications tied to the CAGE code 04804 and reference number 6D29167G01. Any design, material, or part number changes require written approval and classification under specific Code designations, with Code 1 exceptions permitted for identical part substitutions. Mercury contamination is strictly prohibited; the contractor must ensure no metallic mercury or mercury compounds are used in manufacturing or testing, and any intentional use requires prior written approval, detailed justification, and inclusion of a warning plate. The contractor is responsible for all inspection and testing in accordance with original manufacturer specifications and must maintain complete records for 365 days after final delivery. Government Source Inspection is mandatory, and all freight is FOB Origin, with the Navy handling logistics. The contract includes a mandatory option to increase quantities at the original unit price, exercisable by the Contracting Officer within FAR-specified timeframes. Compliance with Buy American, small business subcontracting, cybersecurity maturity certification, and the mandatory use of Workflow Pro (WFP) Mod Assist Module are required. The contractor must submit a quote detailing unit and total price, RTAT, and comparison to new unit price and lead time. Non-compliance with the required RTAT must be explicitly explained. The awardee must provide CAGE codes for the facility performing the repair and for inspection, with the Government retaining rights to audit quality records and inspect work. The contractor must also ensure subcontractors adhere to all terms, including mercury safety and inspection obligations. All documentation and compliance must be submitted via the designated Navy point of contact, Rebecca A. Rainey, and the contract is governed by a range of applicable Department of Defense directives, deviation notices, and procedural standards issued through 2026.
Bare Printed Circuit Board Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 335312
New
Federal
61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QLC22
This contract pertains to the repair and modification of the MOTOR, ALTERNATING C, issued under Emergency Acquisition Flexibilities with a firm-fixed-price structure. The procurement is conducted through a Basic Ordering Agreement (BOA), incorporating its terms unless superseded by this order. The contractor must adhere to strict repair turnaround time (RTAT) requirements, with performance measured from physical receipt of the asset at their facility, as recorded in the Commercial Asset Visibility (CAV) system. Failure to meet the RTAT results in a monthly price reduction per unit and may trigger termination for default. Government Source Inspection (GSI) by DCMA is mandatory before shipment, and payment is contingent upon proper inspection and CAV reporting. All transportation is handled by the Navy, and contractors must coordinate pick-up via ATAC. The item must be repaired in compliance with manufacturer specifications, MIL-STD-130 marking standards, and approved technical documentation, with no substitutions allowed without prior written approval. Any asset deemed beyond repair requires formal documentation and triggers a negotiated non-to-exceed fee for evaluation costs. The contract requires full compliance with Buy American provisions, cybersecurity maturity certification, small business subcontracting, and other federal acquisition flow-down clauses. Contractors must submit a detailed quote including unit price, total price, and RTAT, along with a comparison to the cost and lead time of purchasing a new unit. Records of all inspections and repairs must be maintained for at least one year post-delivery, and all documentation must account for distribution restrictions, especially those involving NOFORN or export-controlled data. The awardee’s CAGE code and performance location must be accurately provided, with inspection and acceptance occurring at the designated facility. The Contracting Officer retains authority to definitize estimated prices through modification, and all modifications must be issued only by authorized entities with proper notification to all parties. Failure to respond within 30 days of contract issuance requires immediate contact with the designated point of contact. Contractors must be authorized distributors of the original manufacturer and provide proof of authorization. The solicitation remains open through August 31, 2026, with delivery and performance obligations tied directly to timely, compliant execution under Navy-specific logistics and quality protocols.
Motor and Generator Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333998
New
Federal
WASHER,SPHERICAL SE
Solicitation # N0010426QAC92
This contract pertains to the manufacture of a WASHER, SPHERICAL SE with part number CL-7-SW and CAGE code 99862, issued under solicitation N0010426QAC92 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The offer deadline is August 17, 2026, and the contract is set aside for small business participation, with full compliance required under applicable small business programs and cybersecurity maturity certification standards effective November 2025. Delivery must be completed within 90 days, and the item must adhere to strict military standards including MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. Government source inspection per FAR 52.246-2 is mandatory, and the contractor bears full responsibility for ensuring quality and compliance, even in the absence of specific inspection clauses. Records of all inspection activities must be retained for 365 days after final delivery. The contract prohibits substitution of the specified item unless prior testing and formal approval are obtained from NAVICP-MECH, as it is governed by a Source Control Drawing that only authorizes the listed vendor. Proposals for alternate items require full technical documentation for government review. All contractual documents are deemed issued upon electronic transmission, and payments will be processed through the Wide Area Workflow system with inspection and acceptance occurring at the source. The contractor must also comply with national defense priority ratings, security prohibitions, and cybersecurity requirements, and must submit any engineering changes, deviations, or waivers in strict accordance with MIL-STD-973. Commercial brand name specifications apply, and any proposed substitute must meet all performance and technical criteria without exception.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 16 days
View Details
NAICS: 332919
New
Federal
VALVE, NEEDLE
Solicitation # N0010426QFG30
This contract pertains to the procurement of a needle valve designated as special emphasis material (Level I/SUBSAFE) for use in a critical shipboard system, where failure could lead to catastrophic consequences including loss of life or the vessel itself. The item must strictly conform to Naval Ship System Command drawing 7067139 and associated specifications, including ASTM-B150 Alloy UNS C63200 in Temper TQ50 or TQ55, with mandatory quantitative chemical and mechanical analysis and full traceability from raw material through final assembly. All materials require permanent, legible traceability markings tied directly to certified test reports, and any processing altering material properties necessitates re-certification with updated documentation. Welding and brazing operations must adhere to S9074-AQ-GIB-010/248 or 0900-LP-001-7000 standards, with all procedures and personnel qualifications submitted for prior Navy approval, and a certificate of compliance is required for every weld filler metal lot. Thread inspection must follow FED-STD-H28 System 21 unless otherwise prescribed, and O-ring sealing surfaces must be inspected using the General Acceptance Criteria (GAC) unless specific drawing criteria override it. The contractor must maintain an ISO-9001 quality system with ISO-10012 and ISO/IEC 17025 calibration compliance, subject to government oversight and audit at the source. All certification data, including non-destructive testing and material analyses, must be submitted electronically via ECDS at least 20 days prior to delivery and reviewed and accepted by Portsmouth Naval Shipyard before shipment, with final delivery due within 365 days of contract effectiveness. The contract is a DO-rated national defense priority order issued under Emergency Acquisition Flexibilities and is a total small business set-aside with mandatory compliance with Buy American provisions and prohibition of mercury contamination. Subcontractors are subject to stringent oversight, including requirement for similar quality controls and traceability, and all documentation must be submitted in electronic format using Adobe PDF. Any deviations or waivers require formal review and approval by the Contracting Officer and must be classified as critical, major, or minor based on safety and performance impact. Final inspection requires 100% verification of traceability, certification completeness, and material conformity, with lot acceptance based on zero defects.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 23 days
View Details
NAICS: 335311
New
Federal
CABLE ASSY,MAI
Solicitation # N0010426QXB46
This contract solicitation, identified as N0010426QXB46, is for the procurement of a CABLE ASSY,MAI under a Firm-Fixed Price arrangement, with all quotations required to be submitted electronically to russell.w.kreider.civ@us.navy.mil by the deadline of August 14, 2026. The award is contingent upon the vendor being an authorized distributor of the original equipment manufacturer, requiring official documentation confirming authorization, and strict adherence to Item Unique Identification (IUID) requirements per DFARS 252.211-7003 and MIL-STD-130 Rev N for physical marking. The contract specifies FOB Origin delivery, mandatory compliance with MIL-STD-2073 packaging standards, and Government Source Inspection, with all supplies subject to inspection and acceptance in accordance with the terms outlined. The contractor must provide a detailed cost breakdown including unit price, total price, lead time, CAGE codes for award and inspection, and a quotation expiration date valid for at least 90 days, and must not make any design, material, or part number changes without prior written approval from the contracting officer, using designated change codes to categorize modifications. The contract imposes comprehensive quality assurance obligations, requiring the contractor to maintain complete and accessible inspection records for 365 days after final delivery and to ensure full compliance with all technical specifications without reliance on sampling to justify defective material submission. Alterations to the part must be flagged using specific design change codes ranging from simple part number updates to non-interchangeable redesigns, with supporting drawings and explanations required for evaluation. All referenced documents must be obtained through authorized DoD sources, with special procedures outlined for restricted documents such as NOFORN or classified materials, which require formal request processes. The solicitation emphasizes that only authorized distributors will be considered for award, and failure to submit proof of authorization disqualifies the offer. The contracting office is located in Mechanicsburg, Pennsylvania, under the Naval Supply Systems Command Weapon Systems Support, with all communications and submissions directed to the designated point of contact.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 334412
New
Federal
CIRCUIT CARD ASSEMB
Solicitation # N0010426QYAE5
This contract pertains to the manufacture and delivery of a CIRCUIT CARD ASSEMBLY under emergency acquisition flexibilities, with immediate bilateral execution upon contractor acceptance. The item must conform to stringent military standards including MIL-STD-973 for configuration control, MIL-STD-130 for item marking, and ANSI/ESD S20.20 for electrostatic discharge protection. All components must be mercury-free and free from contamination, with explicit prohibitions on mercury use unless prior written approval is obtained through detailed documentation. The contractor is responsible for ensuring quality through an inspection system compliant with MIL-I-45208 and must maintain complete inspection records for four years after final delivery. Configuration changes require explicit Government approval, and only approved drawing revisions may be used, with notification required for any prior authorizations carried over from previous contracts. The item must be produced under a DPAS-rated order and delivered with proper packaging per MIL-STD-2073. The contractor must be the Original Equipment Manufacturer or provide a signed letter of authorization from the OEM if acting as a distributor. All materials must be labeled with the specified CAGE code 96169 and reference number 263501706-001CE. Shipping and receiving must follow Wide Area Workflow payment instructions and require a standalone receiving report. Warranty is one year from delivery date. Compliance with security prohibitions, annual certifications, and mandatory use of Workflow Pro’s Assist Module is required. The contract is administered by NAVICP-MECH in Mechanicsburg, PA, with sole point of contact at the provided Navy email address. Solicitation responses are due by September 9, 2026, under NAICS code 334412, and all contractual documents are deemed issued upon electronic transmission.
Bare Printed Circuit Board Manufacturing

POSTED

about 21 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334290
New
Federal
TRANSMITTER,INFRARE
Solicitation # N0010426QXB63
This contract pertains to the procurement of the TRANSMITTER, INFRARED for the 5"/54-Caliber Gun Mount MK45, with requirements strictly defined by multiple drawings, primarily drawing 5181698 and associated technical documentation. The supplier must comply with comprehensive quality and manufacturing standards, including ISO 9001, MIL-STD-130 for marking, MIL-STD-973 for configuration control with specific tailoring, and adherence to numerous military and industry specifications such as MIL-STD-202, MIL-STD-883, MIL-PRF-39003, and others. The item must be sourced from a Government Qualified Products List (QPL) supplier, and 100% production testing is mandatory, with results subject to approval by the DCMC-QAR before shipment. All deliverables must be shipped FOB Origin, packaged per MIL-STD-2073, and accompanied by approved test procedures and reports. The solicitation mandates a Firm-Fixed Price quotation with minimum 90-day expiration, requiring detailed cost breakdowns, lead times, CAGE codes, and proof of authorized distributor status if not the manufacturer, confirmed via official OEM correspondence. Electronic submissions must be sent to stephanie.r.perez7.civ@us.navy.mil, and the evaluation will prioritize price, past performance, and supplier risk under DFARS 252.204-7024. All offerors must comply with Buy American provisions, Small Business Subcontracting Plan mandates, Security Prohibitions, and mandatory use of Workflow Pro (WFP) Assist Module. The Government retains inspection rights, requires records retention for 365 days after delivery, and enforces strict configuration control with prior authorization for any engineering changes. Only authorized distributors may be considered, and all technical inquiries must follow prescribed submission formats and channels. The response deadline is July 24, 2026, and award is contingent on bilateral acceptance.
Other Communications Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 20 days
View Details