Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

43--WY SE KO Replace Sump Eductor

Active
140R6026Q0072Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Department of the Interior, through its Great Plains Regional Office, is conducting market research to identify capable vendors for the procurement of two water jet educators to be installed in the emergency sump systems at the Seminoe and Kortes power plants in Wyoming. These units are non-powered, self-priming devices designed for reliable dewatering during emergencies, requiring no moving parts and capable of handling solids up to one inch in diameter, with a specified capacity ratio of 16.00, motive water consumption of approximately 162 gpm at 85 psig, and solids throughput of 340 ft³/hr at 5 psig and 270 ft³/hr at 10 psig. Equipment must feature ANSI Class 150# flanged connections and replaceable bronze internals, with an overall length of 23-5/8 inches. The procurement is anticipated to follow FAR Part 12 as a Firm-Fixed-Price contract for commercial items, with deliveries directed to the Bureau of Reclamation Warehouse in Mills, Wyoming, and eventual installation at the two plant sites. The solicitation number is 140R6026Q0072, issued on May 19, 2026, with responses due by June 2, 2026, at 3:00 PM MST via email to designated point of contact addresses. No formal proposals, pricing, or contractual terms are currently requested, as this is strictly a sources sought notice for market research purposes. The NAICS code 333996 applies, and the government is particularly interested in responses from small businesses including 8(a), women-owned, HUBZone, service-disabled veteran-owned, and Indian Small Business Economic Enterprises, with a small business size standard of 900 employees. No packaging, marking, or inspection specifications are detailed, and no award basis, evaluation factors, contract value, or delivery schedule are defined at this stage. Contract administration data identifies Sydney Oakes as the Contract Specialist and Michael Hirsch as the Contracting Officer, with no COR or COTR assigned. References to FAR clauses 52.212-3 and 52.222-25 are noted as administrative reminders regarding SAM registration and affirmative action compliance but are not active obligations in this pre-solicitation phase. A diagram of the required water jet educators is attached.

General Info

Purchase of two water jet pumps for emergency sump systems at Seminoe and Kortes plants.

Agency

Department Of The Interior → Great Plains Regional OfficeView Agency

NAICS

333996 - Fluid Power Pump and Motor ManufacturingView NAICS

Place of Performance

MT

Set-Aside

NONE

Documents

(4)

Diagram_1.pdf

PDF

Notice of Sole Source Intent for Water Jet Sump Educators RFQ 140R6026Q0072

PDFspecial-notice

Salient Characteristics for Water Jet Educators

PDFspecifications

Sources Sought Announcement for Tiber Dam Gantry Crane Removal

PDFsources-sought

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

1 update
Posted

Sources Sought

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Great Plains Regional Office
Contacts1 person available
OfficeBILLINGS, MT, 59101, USA
Organization / Agency
Department Of The Interior → Great Plains Regional Office
View Agency Profile
Office AddressBILLINGS, MT, 59101, USA

Full Description

Show more
Purchase of two water jet pumps for emergency sump system at the Seminoe and Kortes plants in Wyoming.

Similar Contracts

Same NAICS industry code

NAICS: 333996
New
International
MOTOR, HYDRAULIC
Solicitation # W8482-264900/A
The Department of National Defence is seeking to procure four hydraulic motors with part number A6VM107HD1/60W0308-PPB020B, manufactured by Bosch Rexroth AG and identified by NCAGE code D8782, for delivery to CFB Halifax, and three identical units for delivery to CFB Esquimalt, with a total requirement of seven units. The solicitation, identified as W8482-264900/A, is posted under the Government of Canada’s procurement system with a response deadline of August 7, 2026. Bidders must comply with mandatory technical requirements, including accurate specification of the part number and NCAGE code, and may propose equivalent or substitute products only if they provide complete technical documentation, compliance statements, and supporting literature demonstrating equivalency in form, fit, function, quality, and performance. Canada reserves the right to request physical samples for verification. The evaluation will be based on the lowest evaluated price among compliant offers, and multiple contracts may be awarded. All items must be packaged and marked in accordance with Canadian Forces Packaging Specification D-LM-008-036/SF-000 or applicable NATO or U.S. military standards, with manufacturer names and part numbers clearly stamped or etched on each unit, and barcodes positioned per Canadian Forces specifications. Safety Data Sheets must be bilingual and include the NATO Stock Number, and all hazardous goods must comply with the Transportation of Dangerous Goods Act and Hazardous Products Act. The Contractor is liable for improper packaging, labeling, or shipment of dangerous goods. Delivery must occur by the dates specified in the Statement of Requirement, with invoicing tied strictly to completed deliveries and supported by packing slips. Payment terms require undisputed invoices to be paid within 30 days, with 15% withholding for non-resident contractors unless a valid CRA waiver is provided. The Contractor must maintain detailed accounting records for seven years after final payment and make them available for audit at any time during and after contract performance. Quality control systems are expected to align with ISO 9001:2015, and all inspection and test records must be retained for three years. The Contractor must comply with Canadian procurement laws, the Code of Conduct for Procurement, and international sanctions regulations, and must immediately notify Canada if sanctions prevent contract performance. No security clearance is required, but the Department retains ownership of all specifications and may inspect deliverables at destination. Sub
Department of National Defence

POSTED

2 days ago

DEADLINE

in 5 days
View Details

More opportunities from Department Of The Interior → Great Plains Regional Office

Same awarding agency

NAICS: 212312
New
Federal
Y--Canceling | Rip-Rap, Lower Yellowstone River
Solicitation # 140R6026Q0092
The contract solicitation 140R6026Q0092 for Rip-Rap for the Lower Yellowstone Bypass Canal is a total small business set-aside under NAICS code 212312, restricted to eligible small businesses including HUBZone, SDVOSB, WOSB, EDWOSB, and 8(a) participants, with a size standard of 750 employees. The contract requires the supply and delivery of 25,000 tons of D100 16-inch riprap and 20,000 tons of bedding material to stockpile site A near Glendive, Montana, with all work must be completed by November 30, 2027. Materials must adhere strictly to ASTM standards including C97 for specific gravity, C88 for sulfate soundness, C33 for aggregate quality, and C128 for fine aggregate, with additional requirements for freeze-thaw resistance (≤5% degradation), angularity, and exclusion of shale, caliche, and organic matter. Delivery is FOB destination, with title and risk of loss transferring upon arrival, and electronic load tickets must accompany each delivery to the Contracting Officer’s Representative via email. Invoices are required to be submitted electronically through the U.S. Treasury’s Invoice Processing Platform (IPP), with a copy emailed to alicia_dunn@ios.doi.gov prior to submission; WAWF is not used. Pre-delivery submission of lab test results is mandatory three days in advance, and all materials must be handled to prevent contamination and segregation during transport and storage. The award will be based on a trade-off process evaluating technical capability and past performance as equally important as price, with no use of LPTA. The contract includes multiple FAR clauses with deviations effective April 2026, particularly in reporting, subcontracting, and commercial item provisions, along with requirements for SAM registration, UEI validation, and compliance with DPAS Regulation 15 CFR 700. The Contracting Officer’s Representative has limited authority, and unauthorized directives from the COR carry risk for the contractor. The Government retains final inspection and acceptance authority at the delivery site, and contractors must ensure all proprietary information is properly marked under applicable confidentiality rules. No contract value is provided, and all pricing details remain unspecified in the solicitation.
Crushed and Broken Limestone Mining and Quarrying

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
J--Downs Pumping Unit Repairs & Generator Replacement
Solicitation # 140R6026Q0098
The Department of the Interior, through its Great Plains Regional Office in Billings, Montana, is seeking information through a Sources Sought Notice for the repair of two pumping units and replacement of a backup generator at a facility associated with the Downs Protective Dike. The scope includes mobilization, removal, repair, and reinstallation of two identical pumping units with a specified flow rate of 4,488 USGPM, a total dynamic head of 24 feet, and a sump/pit depth of 53.5 feet. All repairs must include replacement of all seals and bearings with factory-specified parts, installation of flexible hose-type grease lines, and commissioning in strict compliance with manufacturer specifications. The lubrication method requires Chevron Lubricating Oil FM 32. The generator replacement entails supplying and installing a new unit along with a 500-gallon double-wall integral containment fuel tank positioned outside on the east side of the generator building; open containment basins are prohibited. All electrical work must be performed by a State of Kansas licensed electrician. Performance testing of the pumps must conform to ANSI/HI 14.6 standards, with passing tolerances of grade 2B for units rated at 134HP or less and grade 1B for those exceeding 134HP. Testing will be limited to the bowl assembly with the job motor due to laboratory constraints. The contractor must submit detailed inspection documentation including a full list of replaced components, lubricants used, and installation measurements as outlined in Exhibit D. The government anticipates awarding a firm-fixed-price contract with a performance period of 180 days from award. This notice, issued under FAR Part 10, is for market research only and does not constitute a solicitation or commitment to contract. Interested parties must submit a capability statement of no more than five pages, including business name, address, point of contact, Unique Entity ID from SAM.gov, business size and socio-economic status, and proof of relevant pump repair experience within the last five years. Active SAM registration is mandatory for eligibility, and the government will not reimburse any costs incurred in responding. The response deadline is July 8, 2026, at 5:00 PM MDT, and submissions must be emailed to Dwane D. Esplin. NAICS code 811310 applies, with a small business size standard of $12.5 million, and the procurement is set aside for small businesses.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 8 days
View Details